Product information is current as of publication date. The product conforms Copyright © 2010, Pletronics Inc.
to specifications per the terms of the Pletronics standard warranty. Production
processsing does not necessarily include testing of all parameters.
TSA4 Series
TCXO / TCVCXO
November 2010
Pletronics’ TSA4 Series is a temperature
compensated crystal oscillator with an optional
voltage control function and a CMOS output.
The package is designed for high density
surface mount designs.
Tape and Reel packaging is available.
8 to 40 MHz
Stabilities to 0.5 ppm available
5 x 7 mm LCC Ceramic Package
Optional Voltage Control Function (TCVCXO)
Pletronics Inc. certifies this device is in accordance with the
RoHS (2002/95/EC) and WEEE (2002/96/EC) directives.
Pletronics Inc. guarantees the device does not contain the following:
Cadmium, Hexavalent Chromium, Lead, Mercury, PBB’s, PBDE’s
Weight of the Device: 0.20 grams
Moisture Sensitivity Level: 1 As defined in J-STD-020D.1
Second Level Interconnect code: e4
Absolute Maximum Ratings:
Parameter Unit
VCC Supply Voltage -0.5V to +6.5V
Vi Input Voltage -0.5V to VCC + 0.5V
Vo Output Voltage -0.5V to VCC + 0.5V
Thermal Characteristics
The maximum die or junction temperature is 155oC
The thermal resistance junction to board is 30 to 50oC/Watt depending on the solder pads, ground plane
and construction of the PCB.
TSA4 Series
TCXO / TCVCXO
November 2010
www.pletronics.com 425-776-1880 2
ffff.yww
PLExYWWz
Part Number:
TSA4 031 035 G H 015 008 -40.0M -XX
Internal code or blank
Nominal Frequency in MHz
Pullability in ppm (Vcontrol)
000 = TCXO only
008 = +_ 8 ppm minimum
015 = +_ 15 ppm minimum
Stability in ppm
010 = +_ 1 ppm 005 = +_ 0.5 ppm
015 = +_ 1.5 ppm
025 = +_ 2.5 ppm
Highest Specified Operating Temperature
A = +40oCE = +60oCJ = +80oC
B = +45oCF = +65oCK = +85oC
C = +50oCG = +70oC
D = +55oCH = +75oC
Lowest Specified Operating Temperatu re
A = +10oCE = -10oCJ = -30oC
B = +5oCF = -15oCK = -35oC
C = +0oCG = -20oCL = -40oC
D = -5oCH = -25oC
Highest Supply Voltage*
055 = 5.5 volts 035 = 3.5 volts
036 = 3.6 volts 030 = 3.0 volts
Lowest Supply Voltage *
045 = 4.5 volts 031 = 3.1 volts
030 = 3.0 volts 027 = 2.7 volts
Series (Part Type, Logic & Package)
* Supply Voltage: Select range between 2.7V and 5.5V with ratio of Highest / Lowest < 1.20
For Example: the part number for 3.3V nominal could be TSA4030036.........
Part Marking: ffff =ff.ff frequency in MHz of the crystal
yww = Year and Week of the crystal manufacture
PLE = Pletronics
X= Model number, normally a “B”
YWW = Year and Week of assembly of the TCXO
Z= internal factory code
TSA4 Series
TCXO / TCVCXO
November 2010
www.pletronics.com 425-776-1880 3
Electrical Specification for specified Vcc over the specified temperature range
Item Min Typ Max Unit Condition
Frequency Range 8 40 MHz
Frequency Accuracy 1 -2.5
-0.5 +2.5
+0.5 ppm Vcontrol 1.50 volts if used
Frequency Stability versus
Supply -0.2 +0.2 ppm Load: 15 pF & VCC +_ 5%
Output Waveform CMOS
Output Level High 90 - % of
VCC
Load: 15 pF
Output Level High - 10
Output Rise and Fall Time - 8 nS 10% to 90% of VCC Load: 15 pF
Output Duty Cycle 40 60 % 50% of VCC Load: 15 pF
Phase Noise 10 Hz
100 Hz
1 KHz
10 KHz
>10 KHz
--87
-114
-135
-145
-145
dBc/Hz
V Supply Range 1 VCC 2.7 5.5 Volts
Supply Current ICC at 13 MHz
ICC at 26 MHz
ICC at 40 MHz
-3.2
5.0
8.0
mA 15 pF load, VCC=3.3V, 25oC
Start-up time - 10 mS to be within ±3 ppm of the final frequency
Aging -1.0
-0.5 +1.0
+0.5 ppm Per year at 25oC for the first year
For any year thereafter
Vcontrol Range 0.5 2.70 Volts 1.50 volts nominal
Vcontrol Input Current -50 +50 uA
Frequency Pullability 1-8 +8 ppm
Specified Temperature Range 1-30 +85
Operating Temperature Range -40 +85 oC
Storage Temperature Range -55 +95 oC
1 Specified by part number (consult factory if a specified temperature to -40oC is required)
TSA4 Series
TCXO / TCVCXO
November 2010
www.pletronics.com 425-776-1880 4
Reliability: Environmental Compliance
Parameter Condition
Mechanical Shock MIL-STD-883 Method 2002, Condition B
Vibration MIL-STD-883 Method 2007, Condition A
Solderability MIL-STD-883 Method 2003
Thermal Shock MIL-STD-883 Method 1011, Condition A
ESD Rating
Model Minimum Voltage Conditions
Human Body Model 1500 MIL-STD-883 Method 3115
Charged Device Model 1000 JESD 22-C101
Package Labeling
Label is 1" x 2.6" (25.4mm x 66.7mm) Label is 1" x 2.6" (25.4mm x 66.7mm)
Font is Courier New Font is Arial
Bar code is 39-Full ASCII
(Note: Label will show the actual PN)
TSA4 Series
TCXO / TCVCXO
November 2010
www.pletronics.com 425-776-1880 5
12
43
1
4
2
3
Mechanical:
Not to Scale Inches mm
A 0.276 +_0.006 7.00 +_0.15
Pad Function Note B 0.197 +_0.006 5.00 +_0.15
1 Vcontrol Input If this function is not specified, recommend
connecting this pad to ground. C 0.099 max 2.50 max
D10.039 1.00
2 Ground (GND) E10.197 5.00
3 Output F10.025 0.90
4 Supply Voltage
(VCC)Recommend connecting appropriate power
supply bypass capacitors as close as
possible.
G10.118 3.00
H10.020 0.50
J10.051 1.30
K
10.154 3.90
1 Typic dimensions
Contacts :
Gold 11.8 µinches 0.3 µm minimum over Nickel 50 to 350 µinches 1.27 to 8.89 µm
TSA4 Series
TCXO / TCVCXO
November 2010
www.pletronics.com 425-776-1880 6
260°C M aximum
10 Seconds M aximum
215°C±10°C
Approximately 50 Seconds
Allowed rate of temperature change
Maximum 4°C per second
120 to 160 Seconds
100
150
200
250
Temperature (°C)
175°C±10°C
Reflow Cycle (typical for lead free processing)
The part may be reflowed 2 times without degradation.
Tape and Reel: available for quantities of 250 to 1000 per reel, cut tape for < 250
Constant Dimensions Table 1
Tape
Size D0 D1
Min E1 P0 P2 S1
Min T
Max
T1
Max
8mm
1.5
+0.1
-0.0
1.0
1.75
+_0.1
4.0
+_0.1
2.0
+_0.05
0.6 0.6 0.1
12mm 1.5
16mm 1.5 2.0
+_0.1
24mm 1.5
Variable Dimensions Table 2
Tape
Size B1
Max E2 Min F P1 T2
Max W
Max Ao, Bo &
Ko
16 mm 12.1 14.25 7.5 +_0.1 8.0 +_0.1 8.0 16.3 Note 1
Note 1: Embossed cavity to conform to EIA-481-B Dimensions in mm Not to scale
REEL DIMENSIONS
A inches 7.0 10.0 13.0
mm 177.8 254.0 330.2
B inches 2.50 4.00 3.75
mm 63.5 101.6 95.3 Tape
Width
C mm 13.0 +0.5 / -0.2
D mm 16.4
+2.0
-0.0
16.4
+2.0
-0.0
16.4
+2.0
-0.0
16.0
Reel dimensions may vary from the above
TSA4 Series
TCXO / TCVCXO
November 2010
www.pletronics.com 425-776-1880 7
IMPORTANT NOTICE
Pletronics Incorporated (PLE) reserves the right to make corrections, improvements, modifications and
other changes to this product at anytime. PLE reserves the right to discontinue any product or service
without notice. Customers are responsible for obtaining the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to
PLE’s terms and conditions of sale supplied at the time of order acknowledgment.
PLE warrants performance of this product to the specifications applicable at the time of sale in accordance
with PLE’s limited warranty. Testing and other quality control techniques are used to the extent PLE
deems necessary to support this warranty. Except where mandated by specific contractual documents,
testing of all parameters of each product is not necessarily performed.
PLE assumes no liability for application assistance or customer product design. Customers are
responsible for their products and applications using PLE components. To minimize the risks associated
with the customer products and applications, customers should provide adequate design and operating
safeguards.
PLE products are not designed, intended, authorized or warranted to be suitable for use in life support
applications, devices or systems or other critical applications that may involve potential risks of death,
personal injury or severe property or environmental damage. Inclusion of PLE products in such
applications is understood to be fully at the risk of the customer. Use of PLE products in such applications
requires the written approval of an appropriate PLE officer. Questions concerning potential risk
applications should be directed to PLE.
PLE does not warrant or represent that any license, either express or implied, is granted under any PLE
patent right, copyright, artwork or other intellectual property right relating to any combination, machine or
process which PLE product or services are used. Information published by PLE regarding third-party
products or services does not constitute a license from PLE to use such products or services or a warranty
or endorsement thereof. Use of such information may require a license from a third party under the
patents or other intellectual property of the third party, or a license from PLE under the patents or other
intellectual property of PLE.
Reproduction of information in PLE data sheets or web site is permissible only if the reproduction is
without alteration and is accompanied by associated warranties, conditions, limitations and notices.
Reproduction of this information with alteration is an unfair and deceptive business practice. PLE is not
responsible or liable for such altered documents.
Resale of PLE products or services with statements different from or beyond the parameters stated by
PLE for that product or service voids all express and implied warranties for the associated PLE product or
service and is an unfair or deceptive business practice. PLE is not responsible for any such statements.
Contacting Pletronics Inc.
Pletronics Inc. Tel: 425-776-1880
19013 36th Ave. West Fax: 425-776-2760
Lynnwood, WA 98036-5761 USA E-mail: ple-sales@pletronics.com
URL: www.pletronics.com
Copyright © 2009, 2010 Pletronics Inc.