30 Push-on coax 120 series These BNC/TNC push-on jacks and plugs are designed for (U)PL123 blind mate rack and panel applications. The male plugs mate (U)PL122 with any BNC/TNC jack and are ideally suited for test/cable applications. PL121 Shown .875 1.060 .628 .450 .150 SOLDER POT ACCEPTS .055 DIA CONDUCTOR; (.025 DIA FOR UBJ120) SOLDER CUP ACCEPTS .068 DIA CONDUCTOR .550 DIA .437 HEX .437 WRENCH FLATS .3125-32UNEF-2A 3/8 WRENCH FLATS .375 WRENCHFLATS .500 HEX Panel Plug Front Mount, Solder Pot w/ solder lug 50 75 PL121 UPL121 Bulkhead Jack 50 75 PL121SL UPL121SL w/ solder Lug Front Mount, Solder Lug Mounting Hole: C2.093 50 75 BJ120 UBJ120 50 75 BJ120SL UBJ120SL Mounting Hole: C1.120 PL122 Shown .375 WRENCH FLATS .906 .115 .3125-32UNEF-2A .096 .550 DIA .437 HEX NUT .450 1.230 .500 HEX .468-32 SPECIAL .562 HEX NUT Panel Plug Rear Mount, Cable Entry Mounting Hole: DD5.187 50 75 PL122- 1 UPL122- Bulkhead Cable Jack 1 Front Mount, Tool Crimp Limited Cable Groups Mounting Hole: C1.120 50 75 BJ120C- 1 UBJ120C- 1 PL123-2 Shown PL223-001 Shown .437 HEX .906 1.107 .607 .437 WRENCH FLATS Cable Plug Tool Crimp 1 50 75 PL223- 1 UPL223- .096 BODY .500 DIA .349 DIA Cable Plug 1 Wrench Crimp 50 75 PL123- 1 UPL123- 1 - Refers to Cable Group Table, see pages 68-88 "D" mounting holes are on page 45. Trompeter Products Catalog ISO 9001 Registered R (800) 982-2629 Fax: (818) 706-1040