General Purpose Transistor (-50V, -0.15A) 2SA1037AK / 2SA1576A / 2SA1774 / 2SA2029 Dimensions (Unit : mm) 2SA1576A 2.0 1.3 0.9 (1) (2) 0.2 0 to 0.1 0.15 1.1 0.8 0.15 0 to 0.1 0.1 to 0.4 Each lead has same dimensions (1) Emitter (2) Base (3) Collector ROHM : SMT3 EIAJ : SC-59 Abbreviated symbol : F Each lead has same dimensions (1) Emitter (2) Base (3) Collector ROHM : UMT3 EIAJ : SC-70 Abbreviated symbol : F 2SA2029 0.8 (3) (1) Emitter (2) Base (3) Collecto Abbreviated symbol : F 0.13 0 to 0.1 ROHM : VMT3 EIAJ : 0.22 0.5 0.7 0 to 0.1 0.55 0.15 ROHM : EMT3 EIAJ : SC-75A 0.2 (2) (1) 1.6 0.1Min. 1.2 0.8 0.2 1.2 0.32 0.8 0.2 (3) 1.6 (2) 1.0 0.5 0.5 (1) 0.2 2SA1774 0.3 0.65 0.65 2.1 2.8 0.3 to 0.6 0.7 (3) 0.3 0.95 0.95 1.9 2.9 (3) 1.25 1.6 0.4 0.4 Structure Epitaxial planar type. PNP silicon transistor (2) (1) 2SA1037AK 0.4 Features 1) Excellent hFE linearity. 2) Complements the 2SC2412K / 2SC4081 / 2SC4617 / 2SC5658. 0.15Max. (1) Base (2) Emitter (3) Collector Abbreviated symbol : F Denotes hFE www.rohm.com c 2012 ROHM Co., Ltd. All rights reserved. 1/3 2012.01 - Rev.C 2SA1037AK / 2SA1576A / 2SA1774 / 2SA2029 Data Sheet Absolute maximum ratings (Ta=25C) Symbol Limits Unit Collector-base voltage VCBO -60 V Collector-emitter voltage VCEO -50 V Emitter-base voltage Parameter VEBO -6 V Collector current IC -0.15 A (DC) Collector power 2SA1037AK, 2SA1576A dissipation 2SA2029, 2SA1774 PC Junction temperature Tj 150 C Storage temperature Tstg -55 to +150 C 0.2 W 0.15 Electrical characteristics (Ta=25C) Parameter Symbol Min. Typ. Max. Unit Collector-base breakdown voltage BVCBO -60 - - V IC= -50A Collector-emitter breakdown voltage BVCEO -50 - - V IC= -1mA Emitter-base breakdown voltage BVEBO -6 - - V IE= -50A ICBO - - -0.1 A VCB= -60V Collector cutoff current Emitter cutoff current Collector-emitter saturation voltage Conditions IEBO - - -0.1 A VEB= -6V VCE(sat) - - -0.5 V IC/IB= -50mA/-5mA VCE= -6V, IC= -1mA DC current transfer ratio hFE 120 - 390 - Transition frequency fT - 140 - MHz Output capacitance Cob - 4.0 5.0 pF VCE= -12V, IE=2mA, f=100MHz VCB= -12V, IE=0A, f=1MHz Packaging specifications and hFE Package Type hFE 2SA2029 QR Taping Code T146 T106 TL T2L Basic ordering unit (pieces) 3000 3000 3000 8000 - - - - - - - - 2SA1037AK QR 2SA1576A QR - 2SA1774 QR - - - hFE values are classified as follows: Item Q R hFE 120 to 270 180 to 390 www.rohm.com c 2012 ROHM Co., Ltd. All rights reserved. 2/3 2012.01 - Rev.C 2SA1037AK / 2SA1576A / 2SA1774 / 2SA2029 Data Sheet Electrical characteristic curves -5 -2 -1 -0.5 -0.2 -0.1 -0.2 -0.4 -0.6 -0.8 -1.0 -1.2 -1.4 -1.6 Fig.1 Grounded emitter propagation characteristics -24.5 -21.0 -6 -17.5 -14.0 -4 -10.5 -7.0 -2 -3.5A -0.8 -0.4 -1.6 -1.2 100 -500 -450 -400 -350 -300 -250 -200 -150 -40 -100 -20 -50A IB=0 0 -1 -2 -3 -4 -5 COLLECTOR TO EMITTER VOLTAGE : VCE (V) Fig.2 Grounded emitter output characteristics (I) Fig.3 Grounded emitter output characteristics (II) Ta=100C -40C 200 100 50 50 -1 Ta=25C -0.5 -0.2 IC/IB=50 -0.1 20 10 -0.05 -2 -5 -10 -20 -0.2 -0.5 -1 -50 -100 Fig.4 DC current gain vs. collector current (I) TRANSITION FREQUENCY : fT (MHz) -0.5 -0.2 -0.1 Ta=100C 25C -40C -0.05 -0.2 -0.5 -1 -2 1000 -5 -10 -20 -50 -100 COLLECTOR CURRENT : IC (mA) Fig.7 Collector-emitter saturation voltage vs. collector current (II) www.rohm.com c 2012 ROHM Co., Ltd. All rights reserved. Ta=25C VCE= -12V 200 100 50 1 2 5 10 20 50 100 EMITTER CURRENT : IE (mA) Fig.8 Gain bandwidth product vs. emitter current 3/3 -5 -10 -20 -50 -100 Fig.6 Collector-emitter saturation voltage vs. collector current (I) 500 0.5 -2 COLLECTOR CURRENT : IC (mA) Fig.5 DC current gain vs. collector current (II) lC/lB=10 -0.2 -0.5 -1 COLLECTOR CURRENT : IC (mA) COLLECTOR CURRENT : IC (mA) -1 VCE= -6V -5 -10 -20 -50 -100 -2 COLLECTOR OUTPUT CAPACITANCE : Cob (pF) EMITTER INPUT CAPACITANCE : Cib (pF) -0.2 -0.5 -1 COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) -60 IB=0 -2.0 25C 200 -80 Ta=25C COLLECTOR TO EMITTER VOLTAGE : VCE (V) 500 VCE= -5V -3V -1V Ta=25C DC CURRENT GAIN : hFE DC CURRENT GAIN : hFE 500 -28.0 -8 0 BASE TO EMITTER VOLTAGE : VBE (V) -100 -31.5 COLLECTOR CURRENT : IC (mA) -10 -35.0 Ta=25C COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) -20 -10 VCE= -6V Ta=100C 25C -40C COLLECTOR CURRENT : IC (mA) COLLECTOR CURRENT : Ic (mA) -50 20 Ta=25C f=1MHz IE=0A IC=0A Cib 10 Co b 5 2 -0.5 -1 -2 -5 -10 -20 COLLECTOR TO BASE VOLTAGE : VCB (V) EMITTER TO BASE VOLTAGE : VEB (V) Fig.9 Collector output capacitance vs. collector-base voltage Emitter inputcapacitance vs. emitter-base voltage 2012.01 - Rev.C Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com (c) 2012 ROHM Co., Ltd. All rights reserved. R1120A