9 7 8 6 5 4 3 2 1 NOTES 1. MATERIAL (PA)UL94V-0() HOUSING:POLYAMIDE,GLASS FILLED,UL94V-0,NATURALWHITE PPSUL94V-0 ACTUATOR:POLYPHENYLENE SULFIDE,GLASS FILLED,UL94V-0,BLACK (t=0.2) TERMINAL:PHOSPHOR BRONZE t=0.2 FITTING NAIL:PHOSPHOR BRONZE 2. PLATING TERMINAL (1.0) (1.0) TIN SILVER BISMUTH PLATING (1.0 MICROMETER MINIMUM) UNDER PLATE:NICKEL PLATING (1.0 MICROMETER MINIMUM) FITTING NAIL (1.0) (1.0) TIN PLATING (1.0 MICROMETER MINIMUM) UNDER PLATE:NICKEL PLATING (1.0 MICROMETER MINIMUM) 3. IN THE PACKAGE,ACTUATOR SHOULD BE LOCKED. 4 APPLY FOR EVEN CIRCUIT. 5 FITTING NAIL FOR PREVENTION OF PEELING OF P.W.B. PATTERN. R0.3FPC 6 R0.3 MUST NOT BE OVERLAPED TO PATTERN OF FPC. 7 H 0.1 MAX0.15MAX MISALIGNMENT OF SOLDER TAILS AND FITTING NAILS FROM H UPPER DIRECTION 0.1 MAX., LOWER DIRECTION 0.15 MAX. 8.ELVRoHS ELV AND RoHS COMPLIANT. E D C B K 5 7 FITTING NAIL 0.85 1.28 1.02 9 10.65 10.15 9.65 9.15 8.65 8.15 7.65 7.15 6.65 6.15 5.65 5.15 4.65 4.15 3.65 2.65 9.5 9 8.5 8 7.5 7 6.5 6 5.5 5 4.5 4 3.5 3 2.5 1.5 D C B (A) 52745-2033 52745-1933 52745-1833 52745-1733 52745-1633 52745-1533 52745-1433 52745-1333 52745-1233 52745-1133 52745-1033 52745-0933 52745-0833 52745-0733 52745-0633 52745-0433 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 4 C B EMBOSSED PACKAGE ORDER No. CKT. CONNECTOR SERIES NO. : 52745-**22 0.74 0.66 2.455 DOCUMENT STATUS 14.3 13.8 13.3 12.8 12.3 11.8 11.3 10.8 10.3 9.8 9.3 8.8 8.3 7.8 7.3 6.3 D THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION A FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 16.1 15.6 15.1 14.6 14.1 13.6 13.1 12.6 12.1 11.6 11.1 10.6 10.1 9.6 9.1 8.1 E P1 RELEASE DATE VIEW K () (DETAIL OF FITTING NAIL) 2018/04/13 8 03:51:02 7 6 5 GENERAL TOLERANCES (UNLESS SPECIFIED) 10 UNDER 0.2 10 OVER 30 UNDER 0.25 0.3 30 OVER ANGULAR 3 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 DIMENSION UNITS SCALE mm 10:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL 3.0 4 PLACES 0.2 3 PLACES 0.25 2 PLACES 0.3 1 PLACE 0 PLACES DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS CURRENT REV DESC: REVISED EC NO: 600129 DRWN: YCHEN128 CHK'D: KTAKAHASHI APPR: NUKITA INITIAL REVISION: DRWN: TMORISHITA APPR: KMORIKAWA THIRD ANGLE PROJECTION 3 2018/04/09 2018/04/12 2018/04/13 2012/09/06 2013/03/15 PRODUCT CUSTOMER DRAWING SERIES A3-SIZE 52745 2 DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-52745-055 MATERIAL NUMBER DRAWING A 0.5MM FPC CONN ZIF R/A HOUSING ASSY (UPPER CONTACT) PSD 001 B SHEET NUMBER CUSTOMER GENERAL MARKET 1 1 OF 2 7 8 0.5(N+1)0.07 0.35+0.04 -0.03 0.50.05 APPLICABLE FFC PLATING RECOMMENDED DIMENSION THICKNESS: 0.3+0.03/-0.03 THICKNESS: 0.3+0.03/-0.03 0.30.03 0.30.03 0.5(N-1)0.05 L M SOLDERING AREA OF FITTING NAIL CONNECTOR POSITION DETAIL L 1.25 (0.2) (0.3) (0.3) C 1.25 1.1 () FPC FFC RECOMMENDED STRUCTURE OF FPC RECOMMENDED STRUCTURE OF FFC :100m 100% SCREEN THICKNESS : 100m SCREEN OPEN TATIO : 100% PATTERN R0.303 BOARD VIEW M (DETAIL OF FITTING NAIL ON PATTERN) DOCUMENT STATUS 10 FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 P1 RELEASE DATE 9 2018/04/13 B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION (0.605) (FROM PATTERN EDGE) A C FPC/FFC ABOUT FPC/FFC: RECOMMENDED PUNCHER DIRECTION: FROM CONDUCTOR SIDE TO STIFFNER SIDE PLEASE PUT APPROPRIATE AMOUNT OF ADHESIVE ON ADHEREND BECAUSE THERE IS A POSSIBILITY THAT THE EXTRA ADHESIVE CAUSES THE DEFECT IN ELECTRICAL CONTINUITY. RECOMMENDED P.C.BOARD PATTERN DIMENSION (MOUNTING SIDE) B : (25m) COVER FILM: POLYIMIDE(25m) 0.8 (0.3) REINFORCE BOARD: POLYMIDE THERMOSETTING ADHESIVE (25m) BASE FILM: POLYIMIDE(25m) THERMOSETTING ADHESIVE (35 or 50m) COPPER FOIL (35 or 50m) THERMOSETTING ADHESIVE 0.50.05 (PITCH) (NON-ACCUMULATIVE) 2.2 KEEPING OUT AREA OF PATTERN AND SOLDERING (0.3) 0.6MAX. 1.94MIN. 0.45MAX. D 3.65 3.05 3.65 (0.5-1.2m) (1-5m) PLATING: TIN(0.5-1.2m) NICKEL UNDER(1-5m) APPLICABLE FPC PLATING RECOMMENDED DIMENSION E () ADHESIVEFLAME-RETARDANT POLYESTER ADHESIVE) (25m) INSULATING FILM: PET(25m) 40.5 FFC FPC D F 6 60.5 40.5 E THICKNESS 0.30.03 (PITCH) (STIFFENER BOARD) R0.3 THICKNESS 0.50.08 1 () ADHESIVEFLAME-RETARDANT POLYESTER ADHESIVE) (35 or 50m) COPPER FOIL (35 or 50m) (PITCH) 2 0.3 0.03 60.5 0.50.05 0.5(N-1)0.05 0.50.08 3 0.3 0.03 0.5(N+1)0.07 0.50.1 4 (STIFFENER BOARD) 0.5(N-1)0.05 0.50.1 F 5 6 REINFORCE BOARD: PET () ADHESIVEFLAME-RETARDANT POLYESTER ADHESIVE) (25m) INSULATING FILM: PET(25m) 9 (0.5-1.2m) (1-5m) PLATING: TIN(0.5-1.2m) NICKEL UNDER(1-5m) 10 03:51:02 8 7 6 GENERAL TOLERANCES (UNLESS SPECIFIED) 10 UNDER 0.2 10 OVER 30 UNDER 0.25 0.3 30 OVER ANGULAR 3 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 DIMENSION UNITS SCALE mm 5:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL 3.0 4 PLACES 0.2 3 PLACES 0.25 2 PLACES 0.3 1 PLACE 0 PLACES DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 CURRENT REV DESC: REVISED EC NO: 600129 DRWN: YCHEN128 CHK'D: KTAKAHASHI APPR: NUKITA INITIAL REVISION: DRWN: TMORISHITA APPR: KMORIKAWA THIRD ANGLE PROJECTION 2018/04/09 2018/04/12 2018/04/13 2012/09/06 2013/03/15 DRAWING SERIES A3-SIZE 52745 3 0.5MM FPC CONN ZIF R/A HOUSING ASSY (UPPER CONTACT) PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-52745-055 MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET 2 B SHEET NUMBER 2 OF 2 1 A