Product Data Sheet Product Data Sheet 3MTM Vinyl Table Mat Part Numbers Mats Includes mat, two snaps installed This three-layer vinyl material provides excellent electrical properties. The top layer is made from a tough, easy-to-clean dissipative vinyl. The center layer, a highly conductive metal scrim, moves the charge from the surface to ground quickly. The bottom layer is a durable, non-skid, cushion of dissipative foam. Compatible with constant monitors. Available in rolls, mats, and mats with a ground cord. 24x36 inches Blue: TM2436L3BL Gray: TM2436L3GR 24x48 inches Blue: TM2448L3BL Gray: TM2448L3GR Call for Custom Sizes Mat Kits 24x36 inches Blue: TM2436L3BL-L Gray: TM2436L3GR-L 24x48 inches Blue: TM2448L3BL-L Gray: TM2448L3GR-L Call for Custom Sizes Rolls Properties Typical Value Resistance to Ground point (RTG) 2 X 107 ohms Resistance Top to Top (RTT) 3 X 107 ohms Thickness 0.135 inches Colors Blue and gray Meets the requirements of ANSI/ESD S4.1, ANSI/ESD S20.20. Related Products: 3MTM Ground Cords 3MTM Snaps 3MTM Snap Tool 2x100 feet Blue: TM241200L3BL Gray: TM241200L3GR 3x100 feet Blue: TM361200L3BL Gray: TM361200L3GR 30"x100 feet Blue: TM301200L3BL Gray: TM301200L3GR 4x100 feet Blue: TM481200L3BL Gray: TM481200L3GR RTG is the resistance from one point on the mat's surface to the mat's ground point, and is the fundamental electrical test for a mat. A proper RTG insures that a mat can conduct charge from a point on the surface to the mat ground point. The guideline in ESD STM-4.1 for RTG is 1x106 to 1x109 ohms. ANSI/ESD S-20.20 has an upper limit of <1 x109 ohms. RTT is the resistance from one point on the mat's surface to another point. A proper RTT insures the consistency of the mat's resistance properties. The ESD STM-4.1 guideline for RTT is >1x106 ohms. Product Data Sheet Product Data Sheet 3MTM Vinyl Table Mat 3M is a trademark of 3M Company. All other trademarks are owned by their respective companies. Important Notice All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for one year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 Electronics Materials Solutions Division Static Control Products 926 JR Industrial Drive Sanford, NC 27332-9733 Toll-Free: 866-722-3736 International: 919-718-0000 Email: 3mstaticinfo@mmm.com www.3Mstatic.com Please recycle. Printed in USA. (c) 3M 2014. All rights reserved. 78-9102-1561-1 JHA