REVISION AE SSM-1XX-XXX-DV-XX-XX-X-XX No OF POSITIONS -02 THRU -40 (PER ROW) (SEE NOTE 7) DO NOT SCALE FROM THIS PRINT (No OF POS x .100 [2.54]) .010 [.25] (No OF POS -1) x .100 [2.54] .020 0.51 REF .050 1.27 02 .200 5.08 REF .103 2.62 REF 01 C1 2 MAX SWAY (TYP) NSSM-50-DV "A" OPTION -A: ALIGNMENT PIN (SEE FIG 3, SHT 2) (MOLDED: USE NSSM-XX-DV-XX, 4 POS MIN) -P: PICK & PLACE PAD (SEE NOTE 5) (USE PPP-01, SEE FIG 4, SHT 2) -M: METAL PICK & PLACE PAD (SEE NOTE 5) (USE LMP-02, SEE FIG 5, SHT 2) -K: POLYIMIDE FILM PAD (POS 2 THROUGH 40 - SEE NOTE 5) (USE K-500-300, SEE FIG 6, SHT 2) -TR: TAPE & REEL (SEE FIG 8, SHT 229 POSITIONS MAX) OPTION -BE: BOTTOM ENTRY (ONLY AVAILABLE ON -DV) (FOR -DV SEE NSSM-50-DV-XX) PLATING -S: 30" SELECTIVE GOLD IN CONTACT AREA MATTE TIN ON TAIL -L: 10" LIGHT SELECTIVE GOLD IN CONTACT AREA MATTE TIN ON TAIL -T: MATTE TIN CONTACT AND TAIL -F: 3" FLASH SELECTIVE GOLD CONTACT, MATTE TIN ON TAIL -H: 30" HEAVY GOLD IN CONTACT AREA 3" ON TAIL -STL: 30" SELECTIVE GOLD IN CONTACT AREA TIN/LEAD (90/10+/-5%) TAIL -SM: 30" SELECTIVE GOLD IN CONTACT AREA MATTE TIN ON TAIL -LM: 10" LIGHT SELECTIVE GOLD IN CONTACT AREA MATTE TIN TAIL -TM: MATTE TIN CONTACT AND TAIL -FM: 3" FLASH SELECTIVE GOLD IN CONTACT AREA MATTE TIN TAIL POLARIZING OPTION -XX: POSITION TO BE POLARIZED (USE PK-06-N) (SEE FIG 7, SHT 2) (NOT AVAILABLE WITH -BE OPTION) MOUNTING OPTION -LC: LOCKING CLIP (USE LC-05-TM)(SEE FIG 2)(SEE NOTE 8) ROW SPECIFICATION -DV: DOUBLE VERTICAL (USE NSSM-XX-DV-XX) C-137-01-XXX SEE NOTE 4 .290 7.37 REF C3 C2 +4 90 - 1 .0060 [.152] C4 "A" FIGURE 2 -LC: LOCKING CLIP OPTION FLUSH TO .005 [.13] MAX (SEE NOTE 6) IN-PROCESS SECTION "A"-"A" NOTES: 1. C REPRESENTS A CRITICAL DIMENSION. 2. MINIMUM PULLOUT FORCE: 1 lb 3. MAXIMUM CUT FLASH: .010 [.25]. 4. CUT PARTS MAY OR MAY NOT HAVE NOTCHES 5. -P OPTION: 4 POSITION AND UNDER TO BE -T/R -M OPTION: 3 POSITION AND UNDER TO BE -T/R -K OPTION: 3 POSITION AND UNDER TO BE -T/R ALL OTHER POSITIONS WITH -P, -M, -K OPTIONS ARE TO BE TUBED, UNLESS -TR ORDERED BY CUSTOMER. 6. FLUSH DIMENSION MUST BE INSPECTED ON BOTH ROWS OF ASSEMBLY. 7. -40 MAX POSITION AVAILABLE, -50 FOR STOCK ONLY 8. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE -LC OPTION IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION. AE LC-05-TM .050 1.27 UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES. TOLERANCES ARE: DECIMALS .010 0.25 REF (No OF POS -2) x .100 [2.54] .056 1.42 REF ANGLES .XX: .01 [.3] 2 .XXX: .005 [.13] .XXXX: .0020 [.051] MATERIAL: 2 MAX TOE (ANY DIRECTION) PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 1:0.4 BODY: LCP UL 94 VO, COLOR: BLACK CONTACT: PHOS BRONZE F:\DWG\MISC\MKTG\SSM-1XX-XXX-DV-XX-XX-X-XX-MKT.SLDDRW 4 AE .043 1.09 .277 7.03 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail info@SAMTEC.com code 55322 DESCRIPTION: .100 C.L. DOUBLE VERTICAL SMT SOCKET STRIP DWG. NO. SSM-1XX-XXX-DV-XX-XX-X-XX BY: KEVIN B 3/8/2000 SHEET 1 OF 2 REVISION AE NSSM-XX-DV-XX AE 01 58 57 FIGURE 8 (No OF POS -2) x .100 [2.54] REF FIGURE 3 02 TAPE & REEL VIEW .050 1.27 -A: ALIGNMENT PIN MOLDED (4 POSITION MIN) USER DIRECTION OF UNREELING POCKET NOT DETAILED DIA. .038 0.97 REF FIGURE 4 -P: PICK & PLACE PAD FIGURE 6 "R" = No OF POS x .100 [2.54] "S" EVEN = "R"/2 - .1975 [5.017] "S" ODD = "R"/2 - .2475 [6.287] "R" "S" .010 [.25] -K: POLYIMIDE FILM PAD "R" = No OF POS x .100 [2.54] "S" = "R"/2 - .128 [3.25] "R" "S" .010[.25] .028.010 0.710.25 .195 4.95 REF PPP-01 .395 10.03 REF .050 1.27 REF .256 6.50 AE .295 7.49 FIGURE 5 "R" LMP-02 -M: METAL PICK & PLACE PAD "R" = No OF POS x .100 [2.54] "S" = "R"/2 - .1195 [2.858] "S" .010[.25] PT-1-24-03-15 .280 7.11 REF FIGURE 7 PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. POLARIZING POSITIONS 72 PT-1-24-01-103 .008 0.21 REF .225 5.72 REF 02 DO NOT SCALE DRAWING 71 SHEET SCALE: 1:0.4 01 F:\DWG\MISC\MKTG\SSM-1XX-XXX-DV-XX-XX-X-XX-MKT.SLDDRW 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail info@SAMTEC.com code 55322 DESCRIPTION: .100 C.L. DOUBLE VERTICAL SMT SOCKET STRIP DWG. NO. SSM-1XX-XXX-DV-XX-XX-X-XX BY: KEVIN B 3/8/2000 SHEET 2 OF 2