Aluminum Electrolytic Capacitors/FC Radial Lead Type Series: FC Type :A Country of Origin Japan Malaysia China n Features Endurance : 105C 1000 h to 5000 h Low impedance n Specifications Category temp. range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance -55 to + 105C 6.3 to 100 V .DC 1.0 to 15000 F 20 % (120Hz/+20C) I < 0.01 CV or 3( A) DC Leakage Current after 2 minues application of rated working voltage at +20C (Whichever is greater) W.V.(V) 6.3 10 16 25 35 50 63 100 tan 0.22 0.19 0.16 0.14 0.12 0.10 0.08 0.07 tan For capacitance value > 1000F, add 0.02 per every 1000 F. After following life test with DC voltage and +1052C ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage), the capacitors shall meet the limits specified bellow. Duration : 1000 hours (4 to 6.3), 2000hours (8), 3000 hours (10), 5000 hours (12.5 to 18) Post test requirement at +20 C Endurance Capacitance change 20% of initial measured value < 200 % of initial specified value tan < initial specified value DC leakage current After storage for 1000 hours at +1052 C with no voltage applied and then being stabilized at +20 C, capacitor shall meet the limits specified in Endurance. (With voltage treatment) Shelf Life n Frequency correction factor for ripple current Frequency(Hz) 120 1k 10k 0.65 0.85 0.90 0.75 0.90 0.95 0.80 0.90 0.95 0.85 0.95 1.00 Capacitance W.V.(V.DC) (F) 1.0 390 1200 2700 6.3 to 100 60 0.55 0.70 0.75 0.80 to 330 to 1000 to 2200 to 15000 100k 1.0 1.0 1.0 1.0 n Dimensions in mm (not to scale) 10< d0.05 8> P 0.5 (>6.3mm dia) Vent But exclude 7mm height product L i 3min L <16:L+1.0 max 14 min L >20:L+2.0 max i 8x15, 16x15, 18x15:L+1.5max D+0.5 max D+0.5 max L >11 L=7 Body Dia. D P 0.5 Sleeve 4 5 6.3 4 5 6.3 8 10 Lead Dia. d 0.45 0.45 0.45 0.45 0.5 0.5 0.6 0.6 0.6 0.8 0.8 Lead space P 1.5 2 2.5 1.5 2.0 2.5 3.5 5.0 5.0 5.0 7.5 Body Length L 12.5 16 18 15 to 25 30 to 35 0.8 7.5 Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar. 2005 EE59 Aluminum Electrolytic Capacitors/FC n Case size/ Impedance/ Ripple Current 6.3 V to 35V W.V(V.DC) Impedance Case size (DxL) 4 7 5 7 6.3 7 4 x 11 5 x 11 16 18 18 18 18 18 18 Impedance /100kHz 65 120 200 120 175 0.50 0.35 0.25 0.117 0.085 0.065 0.090 0.068 0.052 0.045 0.035 0.065 0.038 0.030 0.025 0.022 0.018 0.043 0.029 0.022 0.018 0.016 1.00 0.700 0.500 0.234 0.170 0.130 0.180 0.136 0.104 0.090 0.070 0.130 0.076 0.060 0.050 0.044 0.036 0.086 0.058 0.044 0.036 0.032 235 290 400 555 730 995 755 1050 1220 1440 1815 1205 1655 1945 2310 2510 2655 1690 2205 2555 3010 3150 0.015 0.030 0.038 x 20 x 25 x 31.5 0.016 0.032 3635 0.025 0.050 x 35.5 x 40 0.015 0.030 3680 0.023 0.014 0.028 3735 x 31.5 x 35.5 x 40 x 15 3360 2.50 2.4 i1 i2,i3 0.90 0.60 0.40 0.234 0.155 0.120 0.162 0.119 0.090 0.082 0.060 0.110 0.063 0.050 0.040 0.034 0.030 0.080 0.048 0.034 0.028 0.025 0.023 5.00 4.8 i1 i2,i3 1.80 1.20 0.80 0.468 0.310 0.240 0.324 0.238 0.180 0.164 0.120 0.220 0.126 0.100 0.080 0.068 0.060 0.160 0.096 0.068 0.056 0.050 0.046 0.076 2000 0.068 0.136 0.028 0.056 2490 0.042 0.084 0.020 0.040 2740 0.029 0.058 - 63V Ripple Current mA r.m.s /100 kHz 20C -10C 5.00 2.40 1.20 2.60 1.60 x 15 x 11.2 x 15 x 11.5 x 15 x 20 x 12.5 x 16 x 20 x 25 x 30 x 15 x 20 x 25 x 30 12.5 x 35 12.5 x 40 16 x 15 16 x 20 16 x 25 16 20C -10C Ripple Current mA r.m.s /100 kHz 2.00 0.95 0.45 1.30 0.80 5 6.3 6.3 8 8 8 10 10 10 10 10 12.5 12.5 12.5 12.5 16 /100kHz 50V 90 i3 i3 215 260 360 485 635 860 615 850 1030 1200 1610 1150 1480 1832 2215 2285 2590 1610 1835 2235 Impedance /100kHz Ripple Current mA r.m.s /100 kHz 20C -10C 3.50 2.00 7.00 4.00 80 145 1.30 1.00 0.70 0.342 0.230 2.60 2.00 1.40 0.684 0.460 0.356 0.512 200 240 330 405 535 690 535 600 885 1050 1300 1020 1285 1720 2090 2265 2560 0.178 0.256 0.194 0.147 0.130 0.090 0.150 0.085 0.070 0.055 0.047 0.042 0.090 0.059 0.050 0.043 0.036 0.030 0.388 0.294 0.260 0.180 0.300 0.170 0.140 0.110 0.094 0.084 0.180 0.118 0.100 0.080 0.072 1410 1765 2160 0.172 0.055 0.110 2290 0.043 0.086 2585 0.046 1900 2420 2610 3000 3100 0.086 2670 2770 2825 1690 - - 2700 2790 2845 0.060 100V Impedance /100kHz 20C -10C 4.10 8.20 2.80 5.60 3.60 2.20 1.360 0.900 0.660 1.060 0.720 0.480 0.420 0.300 1.80 1.10 0.680 0.450 0.330 0.530 0.360 0.240 0.210 0.150 0.230 0.180 0.110 0.098 0.087 0.072 0.140 0.110 0.089 0.062 0.053 0.047 0.120 0.080 0.032 0.064 2950 0.030 0.060 3095 0.070 0.062 0.041 0.025 0.050 3205 0.036 0.460 0.360 0.220 0.196 0.174 0.144 0.280 0.220 0.178 0.124 0.106 0.094 0.240 0.160 0.140 0.124 0.082 0.072 Ripple Current mA r.m.s /100 kHz 80 90 114 155 260 340 455 306 400 463 599 698 511 671 807 937 1040 1130 793 995 1170 1520 1730 1920 917 1230 1420 1600 1770 2300 i1; Apply to 1F i2; Apply to 2.2, 3.3, 4.7, 10L, 12, 18, and 22F i3 Ripple Current Case size Capacitance Impedance /100kHz DxL (mm) 5 x11 (F) 1.0 2.2 3.3 4.7 10L 12 15 18 22 20C 2.40 1.80 1.30 1.30 1.30 1.30 1.30 1.30 1.30 -10C 4.80 3.60 2.60 2.60 2.60 2.60 2.60 2.60 2.60 mA r.m.s /100 kHz 20 45 65 95 125 135 145 155 155 Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar. 2005 EE60 Aluminum Electrolytic Capacitors/FC n Standard Products W.V. (V) Specification Lead Length Ripple Imped- Endur- Lead Lead Space current ance (20%) ance Dia. Straight Taping Taping (100kHz) (100kHz) iH iB (+105C) (+20C) (F) ( m m ) (mm) (m A ) () (hours) ( m m ) ( m m ) (mm) ( m m ) Cap. Length 27 4 7 65 56 5 7 120 68 4 11 120 100 5 11 120 6.3 7 150 5 220 270 330 1000 5.0 2.5 Min.Packaging Q' ty EEAFC0J270( ) Straight Taping Leads (pcs) (pcs) 200 2000 1.5 0.950 1000 0.45 2.0 5.0 2.5 EEAFC0J560( ) 200 2000 1.30 1000 0.45 1.5 5.0 2.5 EEUFC0J680( ) 200 2000 175 0.80 1000 0.50 2.0 5.0 2.5 EEUFC0J101( ) 200 2000 200 0.450 1000 0.45 2.5 5.0 2.5 EEAFC0J121( ) 200 2000 15 235 0.50 1000 0.50 2.0 5.0 2.5 EEUFC0J151( ) 200 2000 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC0J221( ) 200 2000 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC0J271( ) 200 2000 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC0J331S( ) 200 2000 6.3 15 400 0.250 1000 0.50 2.5 5.0 2.5 EEUFC0J331( ) 200 2000 390 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC0J391( ) 200 1000 470 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC0J471( ) 200 1000 560 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC0J561( ) 200 1000 820 8 15 730 0.085 2000 0.60 3.5 5.0 EEUFC0J821L( ) 200 1000 10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC0J821( ) 200 500 10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC0J102( ) 200 500 1200 1500 8 20 995 0.065 2000 0.60 3.5 5.0 EEUFC0J122L( ) 200 1000 10 16 1050 0.068 3000 0.60 5.0 5.0 EEUFC0J122( ) 200 500 10 20 1220 0.052 3000 0.60 5.0 5.0 EEUFC0J152( ) 200 500 12.5 15 1205 0.065 5000 0.60 5.0 5.0 EEUFC0J152S( ) 200 500 1800 10 25 1440 0.045 3000 0.60 5.0 5.0 EEUFC0J182( ) 200 500 2200 10 25 1440 0.045 3000 0.60 5.0 5.0 EEUFC0J222( ) 200 500 16 15 1690 0.043 5000 0.80 7.5 7.5 250 10 30 1815 0.035 3000 0.60 5.0 12.5 20 1655 0.038 5000 0.60 5.0 2700 3300 3900 4700 5600 6800 EEUFC0J222S( ) 100 EEUFC0J272L 100 5.0 EEUFC0J272( ) 200 500 16 15 1690 0.043 5000 0.80 7.5 7.5 EEUFC0J272S( ) 100 250 12.5 20 1655 0.038 5000 0.60 5.0 5.0 EEUFC0J332( ) 200 500 18 15 2000 0.038 5000 0.80 7.5 7.5 EEUFC0J332S( ) 100 250 12.5 25 1945 0.030 5000 0.60 5.0 5.0 EEUFC0J392( ) 200 500 12.5 30 2310 0.025 5000 0.80 5.0 16 20 2205 0.029 5000 0.80 7.5 12.5 35 2510 0.022 5000 0.80 5.0 16 20 2205 0.029 5000 0.80 7.5 7.5 7.5 12.5 40 2655 0.018 5000 0.80 5.0 16 25 2555 0.022 5000 0.80 7.5 7.5 7.5 18 20 2490 0.028 5000 0.80 7.5 8200 16 31.5 3010 0.018 5000 0.80 7.5 10000 16 35.5 3150 0.016 5000 0.80 7.5 18 25 2740 0.020 5000 0.80 7.5 16 40 3360 0.015 5000 0.80 18 31.5 3635 0.016 5000 0.80 15000 18 35.5 3680 0.015 5000 0.80 7.5 22 4 7 2.0 0.45 1.5 12000 10 2.0 Part No. 0.45 1000 6.3 Case size Dia. 65 1000 EEUFC0J472 100 EEUFC0J472S( ) 100 EEUFC0J562L 100 EEUFC0J562( ) 100 100 EEUFC0J682( ) 100 250 EEUFC0J682S( ) 100 250 EEUFC0J822 100 100 EEUFC0J103S( ) 100 7.5 EEUFC0J123L 100 7.5 EEUFC0J123 50 EEUFC0J153 5.0 2.5 250 EEUFC0J682L EEUFC0J103 7.5 250 EEAFC1A220( ) 250 50 200 2000 When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5mm, 7.5mm.H=2.5mm. The taping dimensions are explained on p.188 of our Catalog. Please use it as a reference guide. Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar. 2005 EE61 Aluminum Electrolytic Capacitors/FC n Standard Products W.V. (V) Lead Length Specification Ripple Imped- Endur- Lead Lead Space ance current ance Dia. Straight Taping Taping (20%) (100kHz) (100kHz) iB iH (+105C) (+20C) (F) ( m m ) (mm) (m A ) () (hours) ( m m ) ( m m ) (mm) ( m m ) Case size Cap. Part No. Min. Packaging Q' ty Dia. Length (pcs) (pcs) 39 5 7 120 0.950 1000 0.45 2.0 5.0 2.5 EEAFC1A390( ) 200 2000 47 4 11 120 1.30 1000 0.45 1.5 5.0 2.5 EEUFC1A470( ) 200 2000 82 5 11 175 0.80 1000 0.50 2.0 5.0 2.5 EEUFC1A820( ) 200 2000 7 200 0.450 1000 0.45 2.5 5.0 2.5 EEAFC1A820( ) 200 2000 5 11 175 0.80 1000 0.50 2.0 5.0 2.5 EEUFC1A101S( ) 200 2000 5 15 235 0.50 1000 0.50 2.0 5.0 2.5 EEUFC1A101( ) 200 2000 150 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1A151( ) 200 2000 180 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1A181( ) 200 2000 220 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1A221S( ) 200 2000 6.3 15 400 0.250 1000 0.50 2.5 5.0 2.5 EEUFC1A221( ) 200 2000 330 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1A331( ) 200 1000 390 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1A391( ) 200 1000 470 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1A471( ) 200 1000 560 10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC1A561( ) 200 500 6.3 100 680 15 730 0.085 2000 0.60 3.5 5.0 EEUFC1A681L( ) 200 1000 10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC1A681( ) 200 500 820 10 16 1050 0.068 3000 0.60 5.0 5.0 EEUFC1A821( ) 200 500 1000 8 20 995 0.065 2000 0.60 3.5 5.0 EEUFC1A102L( ) 200 1000 10 16 1050 0.068 3000 0.60 5.0 5.0 EEUFC1A102( ) 200 500 10 20 1220 0.052 3000 0.60 5.0 5.0 EEUFC1A122( ) 200 500 1200 10 8 Straight Taping Leads 12.5 15 1205 0.065 5000 0.60 5.0 5.0 EEUFC1A122S( ) 200 500 1500 10 25 1440 0.045 3000 0.60 5.0 5.0 EEUFC1A152( ) 200 500 1800 12.5 20 1655 0.038 5000 0.60 5.0 5.0 EEUFC1A182( ) 200 500 16 15 1690 0.043 5000 0.80 7.5 7.5 250 10 30 1815 0.035 3000 0.60 5.0 12.5 20 1655 0.038 5000 0.60 5.0 12.5 25 1945 0.030 5000 0.60 5.0 7.5 2200 2700 3300 3900 4700 5600 6800 18 15 2000 0.038 5000 0.80 7.5 12.5 30 2310 0.025 5000 0.80 5.0 16 20 2205 0.029 5000 0.80 7.5 12.5 35 2510 0.022 5000 0.80 5.0 EEUFC1A182S( ) 100 EEUFC1A222L 100 5.0 EEUFC1A222( ) 200 500 5.0 EEUFC1A272( ) 200 500 250 7.5 16 20 2205 0.029 5000 0.80 7.5 12.5 40 2655 0.018 5000 0.80 5.0 7.5 16 25 2555 0.022 5000 0.80 7.5 16 25 2555 0.022 5000 0.80 7.5 18 20 2490 0.028 5000 0.80 7.5 7.5 16 31.5 3010 0.018 5000 0.80 7.5 EEUFC1A272S( ) 100 EEUFC1A332 100 EEUFC1A332S( ) 100 EEUFC1A392L 100 250 EEUFC1A392( ) 100 EEUFC1A472L 100 7.5 EEUFC1A472( ) 100 250 7.5 EEUFC1A562( ) 100 250 250 7.5 EEUFC1A562S( ) 100 EEUFC1A682 100 EEUFC1A682S( ) 100 EEUFC1A822L 100 18 25 2740 0.020 5000 0.80 7.5 8200 16 35.5 3150 0.016 5000 0.80 7.5 18 31.5 3635 0.016 5000 0.80 7.5 EEUFC1A822 50 10000 18 35.5 3680 0.015 5000 0.80 7.5 EEUFC1A103 50 12000 18 40 3735 0.014 5000 0.80 7.5 EEUFC1A123 50 250 250 When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5mm, 7.5mm. H=2.5mm. The taping dimensions are explained on p.188 of our Catalog. Please use it as a reference guide. Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar. 2005 EE62 Aluminum Electrolytic Capacitors/FC n Standard Products W.V. (V) Specification Lead Length Ripple Imped- Endur- Lead Lead Space ance current (20%) Dia. Straight Taping Taping ance (100kHz) (100kHz) iH iB (+105C) (+20C) (F) ( m m ) (mm) (m A ) () (hours) ( m m ) ( m m ) (mm) ( m m ) Cap. Case size Dia. Length 15 4 7 65 27 5 7 120 2.0 Min.Packaging Q' ty Part No. Straight Taping Leads (pcs) (pcs) 1000 0.45 1.5 5.0 2.5 EEAFC1C150( ) 200 2000 0.950 1000 0.45 2.0 5.0 2.5 EEAFC1C270( ) 200 2000 39 4 11 120 1.30 1000 0.45 1.5 5.0 2.5 EEUFC1C390( ) 200 2000 47 5 11 175 0.80 1000 0.50 2.0 5.0 2.5 EEUFC1C470( ) 200 2000 5 11 175 0.80 1000 0.50 2.0 5.0 2.5 EEUFC1C560( ) 200 2000 7 200 0.450 1000 0.45 2.5 5.0 2.5 EEAFC1C560( ) 200 2000 56 6.3 68 5 11 175 0.80 1000 0.50 2.0 5.0 2.5 EEUFC1C680( ) 200 2000 82 5 15 235 0.50 1000 0.50 2.0 5.0 2.5 EEUFC1C820( ) 200 2000 100 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1C101( ) 200 2000 120 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1C121( ) 200 2000 180 6.3 15 400 0.250 1000 0.50 2.5 5.0 2.5 220 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1C181( ) 200 2000 EEUFC1C221( ) 200 1000 270 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1C271( ) 200 1000 330 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1C331( ) 200 1000 390 10 470 8 10 12.5 560 10 16 680 8 20 995 10 16 1050 820 10 20 1220 12.5 15 1205 10 20 1220 10 25 10 25 16 15 1690 0.043 5000 10 30 1815 0.035 3000 16 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC1C391( ) 200 500 15 730 0.085 2000 0.60 3.5 5.0 EEUFC1C471L( ) 200 1000 755 0.090 3000 0.60 5.0 5.0 EEUFC1C471( ) 200 500 1050 0.068 3000 0.60 5.0 5.0 EEUFC1C561( ) 200 500 0.065 2000 0.60 3.5 5.0 EEUFC1C681L( ) 200 1000 0.068 3000 0.60 5.0 5.0 EEUFC1C681( ) 200 500 0.052 3000 0.60 5.0 5.0 EEUFC1C821( ) 200 500 0.065 5000 0.60 5.0 5.0 EEUFC1C821S( ) 200 500 0.052 3000 0.60 5.0 5.0 EEUFC1C102S( ) 200 500 1440 0.045 3000 0.60 5.0 5.0 EEUFC1C102( ) 200 500 1440 0.045 3000 0.60 5.0 5.0 EEUFC1C122( ) 200 500 0.80 7.5 7.5 250 0.60 5.0 EEUFC1C122S( ) 100 EEUFC1C152L 100 12.5 20 1655 0.038 5000 0.60 5.0 5.0 EEUFC1C152( ) 200 500 16 15 1690 0.043 5000 0.80 7.5 7.5 EEUFC1C152S( ) 100 250 12.5 25 1945 0.030 5000 0.60 5.0 5.0 EEUFC1C182( ) 200 500 18 15 2000 0.038 5000 0.80 7.5 7.5 EEUFC1C182S( ) 100 250 12.5 25 1945 0.030 5000 0.60 5.0 5.0 EEUFC1C222( ) 200 500 16 20 2205 0.029 5000 0.80 7.5 7.5 EEUFC1C222S( ) 100 250 12.5 30 2310 0.025 5000 0.80 5.0 16 20 2205 0.029 5000 0.80 7.5 12.5 35 2510 0.022 5000 0.80 5.0 18 20 2490 0.028 5000 0.80 7.5 7.5 7.5 EEUFC1C272L 100 EEUFC1C272( ) 100 250 EEUFC1C332 100 EEUFC1C332S( ) 100 250 16 25 2555 0.022 5000 0.80 7.5 7.5 EEUFC1C392( ) 100 250 18 20 2490 0.028 5000 0.80 7.5 7.5 EEUFC1C392S( ) 100 250 16 31.5 3010 0.018 5000 0.80 7.5 EEUFC1C472 100 18 25 2740 0.020 5000 0.80 7.5 EEUFC1C472S( ) 100 16 35.5 3150 0.016 5000 0.80 7.5 EEUFC1C562L 100 18 31.5 3635 0.016 5000 0.80 7.5 EEUFC1C562 50 7.5 250 When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5mm, 7.5mm. H=2.5mm. The taping dimensions are explained on p.188 of our Catalog. Please use it as a reference guide. Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar. 2005 EE63 Aluminum Electrolytic Capacitors/FC n Standard Products W.V. (V) 16 Specification Lead Length Ripple Imped- Endur- Lead Lead Space ance current (20%) Dia. Straight Taping Taping ance (100kHz) (100kHz) iB iH (+105C) (+20C) (F) ( m m ) (mm) (m A ) () (hours) ( m m ) ( m m ) (mm) ( m m ) Case size Min. Packaging Q' ty Dia. 6800 16 40 3360 0.015 5000 0.80 7.5 8200 18 35.5 3680 0.015 5000 0.80 7.5 10 4 7 65 2.0 1000 0.45 1.5 5.0 2.5 EEAFC1E100( ) 200 2000 22 5 7 120 0.950 1000 0.45 2.0 5.0 2.5 EEAFC1E220( ) 200 2000 27 4 11 120 1.30 1000 0.45 1.5 5.0 2.5 EEUFC1E270( ) 200 2000 39 5 11 175 0.80 1000 0.50 2.0 5.0 2.5 EEUFC1E390( ) 200 2000 6.3 Length Straight Taping Leads (pcs) EEUFC1C682 EEUFC1C822 (pcs) 100 50 7 200 0.450 1000 0.45 2.5 5.0 2.5 EEAFC1E390( ) 200 2000 47 5 11 175 0.80 1000 0.50 2.0 5.0 2.5 EEUFC1E470( ) 200 2000 56 5 15 235 0.50 1000 0.50 2.0 5.0 2.5 EEUFC1E560( ) 200 2000 82 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1E820( ) 200 2000 100 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1E101S( ) 200 2000 120 6.3 15 400 0.250 1000 0.50 2.5 5.0 2.5 EEUFC1E121( ) 200 2000 180 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1E181( ) 200 1000 220 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1E221( ) 200 1000 270 10 330 8 10 12.5 390 10 16 470 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC1E271( ) 200 500 15 730 0.085 2000 0.60 3.5 5.0 EEUFC1E331L( ) 200 1000 755 0.090 3000 0.60 5.0 5.0 EEUFC1E331( ) 200 500 1050 0.068 3000 0.60 5.0 5.0 EEUFC1E391( ) 200 500 8 20 995 0.065 2000 0.60 3.5 5.0 EEUFC1E471L( ) 200 1000 10 16 1050 0.068 3000 0.60 5.0 5.0 EEUFC1E471( ) 200 500 10 20 1220 0.052 3000 0.60 5.0 5.0 EEUFC1E561( ) 200 500 12.5 15 1205 0.065 5000 0.60 5.0 5.0 EEUFC1E561S( ) 200 500 680 10 20 1220 0.052 3000 0.60 5.0 5.0 EEUFC1E681( ) 200 500 820 10 25 1440 0.045 3000 0.60 5.0 5.0 EEUFC1E821( ) 200 500 12.5 20 1655 0.038 5000 0.60 5.0 5.0 EEUFC1E821S( ) 200 500 560 25 Part No. Cap. 1000 1200 1500 1800 2200 2700 3300 3900 10 30 1815 0.035 3000 0.60 5.0 EEUFC1E102L 100 12.5 20 1655 0.038 5000 0.60 5.0 5.0 EEUFC1E102( ) 200 500 16 15 1690 0.043 5000 0.80 7.5 7.5 EEUFC1E102S( ) 100 250 12.5 25 1945 0.030 5000 0.60 5.0 5.0 EEUFC1E122( ) 200 500 18 15 2000 0.038 5000 0.80 7.5 7.5 EEUFC1E122S( ) 100 250 12.5 25 1945 0.030 5000 0.60 5.0 5.0 EEUFC1E152( ) 200 500 7.5 250 16 20 2205 0.029 5000 0.80 7.5 12.5 30 2310 0.025 5000 0.80 5.0 7.5 EEUFC1E152S( ) 100 EEUFC1E182L 100 EEUFC1E182( ) 100 EEUFC1E222 100 16 20 2205 0.029 5000 0.80 7.5 12.5 35 2510 0.022 5000 0.80 5.0 18 20 2490 0.028 5000 0.80 7.5 7.5 EEUFC1E222S( ) 100 250 16 25 2555 0.022 5000 0.80 7.5 7.5 EEUFC1E272( ) 100 250 16 31.5 3010 0.018 5000 0.80 7.5 18 25 2740 0.020 5000 0.80 7.5 7.5 EEUFC1E332 100 EEUFC1E332S( ) 100 16 35.5 3150 0.016 5000 0.80 7.5 EEUFC1E392L 100 18 31.5 3635 0.016 5000 0.80 7.5 EEUFC1E392 50 4700 18 35.5 3680 0.015 5000 0.80 7.5 EEUFC1E472 50 5600 18 40 3735 0.014 5000 0.80 7.5 EEUFC1E562 50 250 250 When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5mm, 7.5mm. H=2.5mm. The taping dimensions are explained on p.188 of our Catalog. Please use it as a reference guide. Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar. 2005 EE64 Aluminum Electrolytic Capacitors/FC n Standard Products W.V. (V) Specification Lead Length Ripple Imped- Endur- Lead Lead Space ance current (20%) ance Dia. Straight Taping Taping (100kHz) (100kHz) iH iB (+105C) (+20C) (F) ( m m ) (mm) (m A ) () (hours) ( m m ) ( m m ) (mm) ( m m ) Cap. Case size Min. Packaging Q' ty Length (pcs) (pcs) 6.8 4 7 65 2.000 1000 0.45 1.5 5.0 2.5 EEAFC1V6R8( ) 200 2000 12 5 7 120 0.950 1000 0.45 2.0 5.0 2.5 EEAFC1V120( ) 200 2000 18 4 11 120 1.300 1000 0.45 1.5 5.0 2.5 EEUFC1V180( ) 200 2000 22 5 11 175 0.800 1000 0.50 2.0 5.0 2.5 EEUFC1V220( ) 200 2000 5 11 175 0.800 1000 0.50 2.0 5.0 2.5 EEUFC1V270( ) 200 2000 7 200 0.450 1000 0.45 2.5 5.0 2.5 EEAFC1V270( ) 200 2000 27 6.3 Straight Taping Leads 33 5 11 175 0.080 1000 0.50 2.0 5.0 2.5 EEUFC1V330( ) 200 2000 39 5 15 235 0.500 1000 0.50 2.0 5.0 2.5 EEUFC1V390( ) 200 2000 47 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1V470( ) 200 2000 56 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1V560( ) 200 2000 68 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1V680( ) 200 2000 82 6.3 15 400 0.250 1000 0.50 2.5 5.0 2.5 EEUFC1V820( ) 200 2000 100 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1V101( ) 200 1000 120 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1V121( ) 200 1000 150 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1V151( ) 200 1000 180 10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC1V181( ) 200 500 220 35 Part No. Dia. 15 730 0.085 2000 0.60 3.5 5.0 EEUFC1V221L( ) 200 1000 10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC1V221( ) 200 500 270 10 16 1050 0.068 3000 0.60 5.0 5.0 EEUFC1V271( ) 200 500 330 8 20 995 0.065 2000 0.60 3.5 5.0 EEUFC1V331L( ) 200 1000 10 16 1050 0.068 3000 0.60 5.0 5.0 EEUFC1V331( ) 200 500 390 10 20 1220 0.052 3000 0.60 5.0 5.0 EEUFC1V391( ) 200 500 12.5 15 1205 0.065 5000 0.60 5.0 5.0 EEUFC1V391S( ) 200 500 470 10 20 1220 0.052 3000 0.60 5.0 5.0 EEUFC1V471( ) 200 500 560 10 25 1440 0.045 3000 0.60 5.0 5.0 EEUFC1V561( ) 200 500 12.5 20 1655 0.038 5000 0.60 5.0 5.0 500 680 10 30 1815 0.035 3000 0.60 5.0 12.5 20 1655 0.038 5000 0.60 5.0 16 15 1690 0.043 5000 0.80 7.5 12.5 25 1945 0.030 5000 0.60 5.0 5.0 EEUFC1V821L( ) 200 500 18 15 2000 0.038 5000 0.80 7.5 7.5 EEUFC1V821( ) 100 250 820 1000 1200 1500 1800 2200 8 EEUFC1V561S( ) 200 EEUFC1V681L 100 5.0 EEUFC1V681( ) 200 500 7.5 EEUFC1V681S( ) 100 250 12.5 25 1945 0.030 5000 0.60 5.0 5.0 EEUFC1V102( ) 200 500 16 20 2205 0.029 5000 0.80 7.5 7.5 EEUFC1V102S( ) 100 250 12.5 30 2310 0.025 5000 0.80 5.0 16 20 2205 0.029 5000 0.80 7.5 12.5 35 2510 0.022 5000 0.80 5.0 16 25 2555 0.022 5000 0.80 7.5 7.5 7.5 18 20 2490 0.028 5000 0.80 7.5 12.5 40 2655 0.018 5000 0.80 5.0 16 25 2555 0.022 5000 0.80 7.5 18 20 2490 0.028 5000 0.80 7.5 16 31.5 3010 0.018 5000 0.80 7.5 18 25 2740 0.020 5000 0.80 7.5 7.5 EEUFC1V122L 100 EEUFC1V122( ) 100 250 EEUFC1V152L 100 EEUFC1V152( ) 100 250 250 EEUFC1V152S( ) 100 EEUFC1V182L 100 7.5 EEUFC1V182( ) 100 250 7.5 EEUFC1V182S( ) 100 250 7.5 EEUFC1V222 100 EEUFC1V222S( ) 100 250 When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5mm, 7.5mm. H=2.5mm. The taping dimensions are explained on p.188 of our Catalog. Please use it as a reference guide. Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar. 2005 EE65 Aluminum Electrolytic Capacitors/FC n Standard Products W.V. (V) Lead Length Specification Ripple Imped- Endur- Lead Lead Space ance current (20%) Dia. Straight Taping Taping ance (100kHz) (100kHz) iB iH (+105C) (+20C) (F) ( m m ) (mm) (m A ) () (hours) ( m m ) ( m m ) (mm) ( m m ) Cap. 2700 Length Min.Packaging Q' ty Part No. Straight Taping Leads (pcs) (pcs) 16 35.5 3150 0.016 5000 0.80 7.5 EEUFC1V272L 100 18 31.5 3635 0.016 5000 0.80 7.5 EEUFC1V272 50 3300 18 35.5 3680 0.015 5000 0.80 7.5 EEUFC1V332 50 3900 18 40 3735 0.014 5000 0.80 7.5 EEUFC1V392 50 1.0 5 11 20 2.40 1000 0.50 2.0 5.0 2.5 EEUFC1H1R0( ) 200 2000 2.2 5 11 45 1.80 1000 0.50 2.0 5.0 2.5 EEUFC1H2R2( ) 200 2000 35 3.3 5 11 65 1.30 1000 0.50 2.0 5.0 2.5 EEUFC1H3R3( ) 200 2000 4.7 5 11 95 1.30 1000 0.50 2.0 5.0 2.5 EEUFC1H4R7( ) 200 2000 10 50 Case size Dia. 4 11 90 2.50 1000 0.45 1.5 5.0 2.5 EEUFC1H100( ) 200 2000 5 11 125 1.30 1000 0.50 2.0 5.0 2.5 EEUFC1H100L( ) 200 2000 12 5 11 135 1.30 1000 0.50 2.0 5.0 2.5 EEUFC1H120( ) 200 2000 15 5 11 145 1.30 1000 0.50 2.0 5.0 2.5 EEUFC1H150( ) 200 2000 18 5 11 155 1.30 1000 0.50 2.0 5.0 2.5 EEUFC1H180( ) 200 2000 22 5 11 155 1.30 1000 0.50 2.0 5.0 2.5 EEUFC1H220( ) 200 2000 27 5 15 215 0.90 1000 0.50 2.0 5.0 2.5 EEUFC1H270( ) 200 2000 33 6.3 11.2 260 0.60 1000 0.50 2.5 5.0 2.5 EEUFC1H330( ) 200 2000 39 6.3 11.2 260 0.60 1000 0.50 2.5 5.0 2.5 EEUFC1H390( ) 200 2000 47 6.3 11.2 260 0.60 1000 0.50 2.5 5.0 2.5 EEUFC1H470( ) 200 2000 56 6.3 15 360 0.40 1000 0.50 2.5 5.0 2.5 EEUFC1H560( ) 200 2000 68 8 11.5 485 0.234 2000 0.60 3.5 5.0 EEUFC1H680( ) 200 1000 82 8 11.5 485 0.234 0.60 3.5 5.0 EEUFC1H820( ) 200 1000 100 10 12.5 615 0.162 3000 0.60 5.0 5.0 EEUFC1H101( ) 200 500 120 8 15 635 0.155 2000 0.60 3.5 5.0 EEUFC1H121L( ) 200 1000 10 12.5 615 0.162 3000 0.60 5.0 5.0 EEUFC1H121( ) 200 500 150 10 16 850 0.119 3000 0.60 5.0 5.0 EEUFC1H151( ) 200 500 180 220 2000 8 20 860 0.120 2000 0.60 3.5 5.0 EEUFC1H181L( ) 200 1000 10 16 850 0.119 3000 0.60 5.0 5.0 EEUFC1H181( ) 200 500 10 20 1030 0.090 3000 0.60 5.0 5.0 EEUFC1H221( ) 200 500 12.5 15 1150 0.110 5000 0.60 5.0 5.0 EEUFC1H221S( ) 200 500 5.0 500 270 10 25 1200 0.082 3000 0.60 5.0 330 10 30 1610 0.060 3000 0.60 5.0 12.5 20 1480 0.063 5000 0.60 5.0 390 12.5 20 1480 0.063 5000 0.60 5.0 16 15 1610 0.080 5000 0.80 7.5 7.5 470 10 30 1610 0.060 3000 0.60 5.0 12.5 25 1832 0.050 5000 0.60 5.0 12.5 25 1832 0.050 5000 0.60 5.0 18 15 1900 0.068 5000 0.80 7.5 12.5 30 2215 0.040 5000 0.80 5.0 16 20 1835 0.048 5000 0.80 7.5 12.5 35 2285 0.034 5000 0.80 5.0 18 20 2420 0.042 5000 0.80 7.5 12.5 40 2590 0.030 5000 0.80 5.0 16 25 2235 0.034 5000 0.80 7.5 560 680 820 1000 EEUFC1H271( ) 200 EEUFC1H331L 100 5.0 EEUFC1H331( ) 200 500 5.0 EEUFC1H391( ) 200 500 250 EEUFC1H391S( ) 100 EEUFC1H471L 100 EEUFC1H471( ) 200 500 5.0 EEUFC1H561( ) 200 500 7.5 EEUFC1H561S( ) 100 250 5.0 7.5 EEUFC1H681L 100 EEUFC1H681( ) 100 EEUFC1H821L 100 7.5 EEUFC1H821( ) 100 EEUFC1H102L 100 7.5 EEUFC1H102( ) 100 250 250 250 When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5mm, 7.5mm. H=2.5mm. The taping dimensions are explained on p.188 of our Catalog. Please use it as a reference guide. Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar. 2005 EE66 Aluminum Electrolytic Capacitors/FC n Standard Products W.V. (V) Specification Lead Length Ripple Imped- Endur- Lead Lead Space current ance (20%) ance Dia. Straight Taping Taping (100kHz) (100kHz) iB iH (+105C) (+20C) (F) ( m m ) (mm) (m A ) () (hours) ( m m ) ( m m ) (mm) ( m m ) Cap. 1200 50 1500 1800 Case size Dia. 16 31.5 2700 0.028 5000 0.80 7.5 18 25 2610 0.029 5000 0.80 7.5 16 35.5 2790 0.025 5000 0.80 7.5 7.5 Part No. Min. Packaging Q' ty Straight Taping Leads (pcs) EEUFC1H122 100 EEUFC1H122S( ) 100 EEUFC1H152L 100 16 40 2845 0.023 5000 0.80 7.5 EEUFC1H182L 100 18 31.5 3000 0.025 5000 0.80 7.5 EEUFC1H182 50 35.5 3100 EEUFC1H222 (pcs) 250 2200 18 0.023 5000 0.80 7.5 6.8 4 11 80 3.50 1000 0.45 1.5 5.0 2.5 EEUFC1J6R8( ) 200 2000 12 5 11 145 2.0 1000 0.50 2.0 5.0 2.5 EEUFC1J120( ) 200 2000 18 5 15 200 1.30 1000 0.50 2.0 5.0 2.5 EEUFC1J180( ) 200 2000 22 6.3 11.2 240 1.0 1000 0.50 2.5 5.0 2.5 EEUFC1J220( ) 200 2000 50 33 6.3 11.2 240 1.0 1000 0.50 2.5 5.0 2.5 EEUFC1J330( ) 200 2000 39 6.3 15 330 0.70 1000 0.50 2.5 5.0 2.5 EEUFC1J390( ) 200 2000 47 8 11.5 405 0.342 2000 0.60 3.5 5.0 EEUFC1J470( ) 200 1000 56 8 11.5 405 0.342 2000 0.60 3.5 5.0 EEUFC1J560( ) 200 1000 68 8 11.5 405 0.342 2000 0.60 3.5 5.0 EEUFC1J680( ) 200 1000 82 10 12.5 535 0.256 3000 0.60 5.0 5.0 EEUFC1J820( ) 200 500 15 535 0.230 2000 0.60 3.5 5.0 EEUFC1J101L( ) 200 1000 12.5 535 0.256 3000 0.60 5.0 5.0 EEUFC1J101( ) 200 500 100 8 10 120 10 16 600 0.194 3000 0.60 5.0 5.0 EEUFC1J121( ) 200 500 150 8 20 690 0.178 2000 0.60 3.5 5.0 EEUFC1J151( ) 200 1000 180 10 20 885 0.147 3000 0.60 5.0 5.0 EEUFC1J181( ) 200 500 12.5 15 1020 0.150 5000 0.60 5.0 5.0 EEUFC1J181S( ) 200 500 10 20 885 0.147 3000 0.60 5.0 5.0 EEUFC1J221X( ) 200 500 10 25 1050 0.130 3000 0.60 5.0 5.0 EEUFC1J221( ) 200 500 220 63 Length 12.5 20 1285 0.085 5000 0.60 5.0 5.0 EEUFC1J221S( ) 200 500 270 16 15 1410 0.090 5000 0.80 7.5 7.5 EEUFC1J271( ) 100 250 330 10 30 1300 0.090 3000 0.60 5.0 EEUFC1J331L 100 12.5 20 1285 0.085 5000 0.60 5.0 5.0 EEUFC1J331( ) 200 500 390 12.5 25 1720 0.070 5000 0.60 5.0 5.0 EEUFC1J391( ) 200 500 18 15 1690 0.086 5000 0.80 7.5 7.5 250 470 12.5 30 2090 0.055 5000 0.80 5.0 16 20 1765 0.059 5000 0.80 7.5 560 16 25 2160 0.050 5000 0.80 7.5 680 12.5 35 2265 0.047 5000 0.80 5.0 16 25 2160 0.050 5000 0.80 7.5 7.5 7.5 820 1000 1200 18 20 2290 0.055 5000 0.80 7.5 12.5 40 2560 0.042 5000 0.80 5.0 16 31.5 2670 0.043 5000 0.80 7.5 18 25 2585 0.043 5000 0.80 7.5 16 31.5 2670 0.043 5000 0.80 16 35.5 2770 0.036 5000 0.80 EEUFC1J391S( ) 100 EEUFC1J471L 100 7.5 EEUFC1J471( ) 100 250 7.5 EEUFC1J561( ) 100 250 EEUFC1J681L 100 EEUFC1J681( ) 100 250 EEUFC1J681S( ) 100 250 EEUFC1J821L 100 EEUFC1J821 100 EEUFC1J821S( ) 100 7.5 EEUFC1J102U 100 7.5 EEUFC1J102 100 7.5 16 40 2825 0.030 5000 0.80 7.5 EEUFC1J122L 100 18 31.5 2950 0.032 5000 0.80 7.5 EEUFC1J122 50 1500 18 35.5 3095 0.030 5000 0.80 7.5 EEUFC1J152 50 1800 18 40 3205 0.025 5000 0.80 7.5 EEUFC1J182 50 250 When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5mm, 7.5mm. H=2.5mm. The taping dimensions are explained on p.188 of our Catalog. Please use it as a reference guide. Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar. 2005 EE67 Aluminum Electrolytic Capacitors/FC n Standard Products W.V. (V) Specification Lead Length ImpedRipple EndurLead Length Lead Space current ance ance Dia. (20%) Straight Taping Taping (100kHz) (100kHz) (+105C) (+20C) (F) ( m m ) (mm) (m A ) () (hours) ( m m ) ( m m ) (mm) ( m m ) Cap. Part No. Min. Packaging Q' ty Straight Taping Leads (pcs) (pcs) 5.6 5 11 80 4.1 1000 0.50 2.0 5.0 2.5 EEUFC2A5R6( ) 200 2000 8.2 5 15 90 2.8 1000 0.50 2.0 5.0 2.5 EEUFC2A8R2( ) 200 2000 12 6.3 11.2 114 1.8 1000 0.50 2.5 5.0 2.5 EEUFC2A120( ) 200 2000 18 6.3 15 155 1.1 1000 0.50 2.5 5.0 2.5 EEUFC2A180( ) 200 2000 22 8 11.5 260 0.68 2000 0.60 3.5 5.0 EEUFC2A220( ) 200 1000 33 8 15 340 0.45 2000 0.60 3.5 5.0 EEUFC2A330L( ) 200 1000 10 12.5 306 0.53 3000 0.60 5.0 5.0 EEUFC2A330( ) 200 500 8 20 455 0.33 2000 0.60 5.0 5.0 EEUFC2A390L( ) 200 1000 10 16 400 0.36 3000 0.60 5.0 5.0 EEUFC2A390( ) 200 500 200 500 39 56 10 20 463 0.24 3000 0.60 5.0 5.0 EEUFC2A560( ) 68 10 25 599 0.21 3000 0.60 5.0 5.0 EEUFC2A680L( ) 200 500 12.5 15 511 0.23 5000 0.60 5.0 5.0 EEUFC2A680( ) 200 500 10 30 698 0.15 3000 0.60 5.0 EEUFC2A101L 100 5000 0.60 5000 0.80 5.0 5.0 EEUFC2A101( ) 200 500 7.5 7.5 EEUFC2A121S( ) 100 250 5000 0.60 5000 0.80 5.0 5.0 EEUFC2A151( ) 200 500 7.5 EEUFC2A151S( ) 100 250 5000 0.60 5000 0.80 5.0 EEUFC2A181L 100 7.5 EEUFC2A181( ) 100 5000 0.60 5000 0.80 5.0 EEUFC2A221L 100 7.5 EEUFC2A221( ) 100 5000 0.60 5000 0.80 5.0 EEUFC2A271L 100 EEUFC2A271S( ) 100 5000 0.80 5000 0.80 7.5 EEUFC2A331 100 EEUFC2A331S( ) 100 5000 0.80 5000 0.80 7.5 EEUFC2A391L 100 7.5 EEUFC2A391 50 7.5 EEUFC2A471 100 7.5 EEUFC2A561 50 7.5 EEUFC2A681 50 100 100 Case size Dia. 12.5 20 671 0.180 120 16 15 793 0.140 150 12.5 25 807 0.110 18 15 917 0.120 12.5 30 937 0.098 16 20 995 0.110 12.5 35 1040 0.087 180 220 16 25 1170 0.089 12.5 40 1130 0.072 18 20 1230 0.080 16 31.5 1520 0.062 18 25 1420 0.070 16 35.5 1730 0.053 18 31.5 1600 0.062 470 16 40 1920 0.047 560 18 35.5 1770 0.041 5000 0.80 5000 0.80 0.036 5000 0.80 270 330 390 680 18 40 2300 7.5 7.5 7.5 7.5 7.5 7.5 7.5 250 100 250 250 When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5mm, 7.5mm. H=2.5mm. The taping dimensions are explained on p.188 of our Catalog. Please use it as a reference guide. Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar. 2005 EE68