FZ-Lite VISION SENSOR
» Intuitive user guidance
» Flexible Vision platform
» Crystal-clear imaging
Easy inspection beyond expectation
Intelligent Compact Camera
Lite Controller Monitor
I
nte
ll
igent Compact Came
r
n
t
rol
ler
ra
Lit
e C
o
n
2
The new FZ-Lite integrates the benefits of a
Smart Camera and a powerful Vision System
in a single platform.
The unique image clarity achieved by using
an intelligent camera enables simple setup,
fast installation and enhanced optical
performance.
In combination with the powerful
FZ-Lite controller it takes you into a
new dimension of image processing.
Highest performance, simplicity and
unique flexibility are defining a new standard
for Compact Vision Sensors.
Features
• Crystal-clear image quality
• Real Color Processing (16 million colors)
• C-mount and Smart Cameras
• EtherNet/IP & TCP/IP communication
Benefits
• Simple and guided set-up
• Reliable results on any surface
• One platform for any application
Simple, flexible & crystal clear
3
FZ-Lite supports the Smart Camera
technology from the FQ-series Sensors.
This allows fast and easy installation
of the camera on the machine, without
further optics and illumination. Crystal
Clear images can be easily captured
using High-power Lighting and a Polar-
izing Filter that eliminates glare.
More than 20 processing items are pro-
vided by FZ-Lite, such as dimension
measurements, various search items
(pattern, contour), defects, edge and
count tools. These processing items,
can be combined in a flow program, of-
fering branches or loops. This offers a
new dimension of flexibility for Com-
pact Vision Sensors.
EtherNet/IP, a global standard for
factory automation data networking,
is supported for seamless integra-
tion into a production line or machine.
This allows users to easily connect to
any EtherNet/IP enabled devices from
any manufacturer. Further communica-
tion is possible via TCP/IP, serial and
parallel interfaces.
Simple Operation Flexible Flow configuration Open Network
4
Camera with integrated High-power Lighting
HDR Sensing
Real Color Sensing
2 Million Pixel Camera
2 Million Pixel
Underexposure HDR Image
Halation
Typical Problem
Uniform Brightness
Monochrome
Real Color
A high dynamic range (HDR) function is provided to eliminate the
influence of objects with irregular reflectance and changes in
external light conditions. By increasing the high dynamic range by a
factor of up to 5,000, objects that previously could not be detected
due to inconsistent lighting or halation can be clearly inspected.
Color sensing is standard for OMRON Vision Sensors. Real color
processing enables stable detection of minute color differences,
which is difficult to perform using color gray processing or filtering.
It is not necessary to perform color extraction or redo the setup
every time the workpiece color changes.
Inspections that require high resolution can be solved with the
2 Million Pixel Camera. Presence and dimension inspections can be
realized. At a rate of 30 frames per second. The input speed is the
highest in this class. The use of a C-mount Lens enables applica-
tions in any field of view.
A new benchmark in image clarity
Achieving sharp and crystal clear images that improve inspection performance has never been so easy. The FZ-Lite
features powerful functions, to eliminate the effects of direct reflections, environmental light interference and big
variations in brightness. These cutting edge functions shorten and simplify the installation and setup procedure.
Simply don't care anymore about how to install the camera in the best way, to get a sharp image.
The Camera utilizes integrated High-power Lighting that enables
uniform illumination in the field of view. Utilizing a new optical design,
bright and clear images can be achieved without additional lighting.
A Polarizing Filter can be used to cut direct light reflections to elimi-
nate the common issue of glare resulting from highly reflective surfaces.
Simple Operation
Simple Operation
QTY:60
Amount per Tablet
Materials Amount
Vitamin A 10g
Vitamin D 5g
Vitamin E 10g
CALCIUM 100%
IRON 80%
TAKE ONE TABLET BY MOUTH
TWICE DAILY
QTY:60
Amount per Tablet
CALCIUM 100%
IRON 80%
TAKE ONE TABLET BY MOUTH
TWICE DAILY
5
Dimension Measurements
Scan Edge Width
Multiple measurements can be per-
formed on the objects for their mini-
mum width, maximum width, and
average width. Enhanced performance
is also provided to detect the depth of
grooves on metal shafts.
Inspection of Defects
Defects
Perform inspection of defects and dirt
on solid-colored objects, component
chips or burrs.
Fine Matching
Fine Matching is ideal when the back-
ground has a pattern. In Combination
with the standard image it enables
high-speed, high-precision inspection
for minute dirt and edge chips.
Workpiece Count
Labeling
A cluster of objects is extracted as
labels, and the parameters for area,
center of gravity, and other factors are
generated for output and further pro-
cessing. Perform measurements for
roundness, enclosing rectangles, and
circumference measurement. Count-
ing by sorting of the labels according
to coordinates or size can also be
performed.
Measurements
Detection of Subtle Differences
Appearance Inspections
Sensitive Search
Detailed matching is performed by
automatically separating a registered
image. Subtle differences that cannot
be determined using normal searches
are detected with good stability and
correlation difference. So, there's no
need for accurate threshold settings.
Character Inspections
Flexible Application
Flexible Application
Date Verification
By simply setting the period of pro-
duction, the character string can be
automatically verified and the print-
ing can be easily validated. The
printed expiration date is changed
automatically every day.
Inspection of Expiration Dates Prevention of False Rejections
Flexible Search
Inspection can be performed to ac-
cept items with variations in printing
quality and shape, and to reject only
those items that are obviously wrong.
Registering multiple images of ac-
ceptable items as models enables
stable searching regardless of the
printing quality or changes in shape.
A: Standard work
B: Different kind work
Powerful processing items for any
inspection and industry
Inspection and
Measurement Items
Easy Creation of Ladder Programs
Easier, Faster
Network Logging
Reading and writing I/O
memory areas can be
easily set on the special
menu screen.
EtherNet/IP
PLC Link Function Network Drive Function
HUB
Network logging
Uploading and
downloading
scene data
Controller
Hard drive
Computer
6
Choose the interface you need
EtherNet/IP is a widely used communication protocol in factories around the world. You can
easily connect to OMRON PLCs or any other vendor device that supports EtherNet/IP to enable
high-speed communication.
A PLC Link function is included to reduce the effort in ladder
programming for serial communications and standard Ethernet.
The network drive function in FZ-Lite allows users to output and
store images and measurement values to computers over a
network, not limited to internal or only to USB memory. Connect-
ing a large-capacity hard drive enables long-term image logging.
It can also be used for storage of configuration data. Back-up
and restore of any data over the network is also supported.
Applicable PLCs
OMRON CS, CJ, CP, and NSJ Series
Mitsubishi Electric Q Series
Open Network
Open Network
A variety of interfaces, such as EtherNet/IP, general-purpose Ethernet, and serial communications allows
easy communication with a PLC or other external devices.
7
Ordering Information
Controllers
Cameras
Cameras peripheral devices
Appearance Type Model Remarks
Lite Control lers
Two-came ra controllers NPN FZ3-L350 ---
PNP FZ3-L355 ---
Four-camera controllers NPN FZ3-L350-10 ---
PNP FZ3-L355-10 ---
Appearance Type Model Remarks
Intelligent Compact
Cameras
Wide View (Short-distance) @100mm Color FZ-SQ100N
Came ra +L en s +
High-power Lighting
Wide View (Long-distance) @100mm Color FZ-SQ100F
Standard @50mm Color FZ-SQ050F
Narrow View @10mm Color FZ-SQ010F
Inte lli ge n t Cameras Wide field of vision Color FZ-SLC100 Camera + Zoom, Autofocus
Lens + Intelligent Lighting
Narrow field of visi o n Color FZ-SLC15
Autofocus Cameras Wide field of vision Color FZ-SZC100 Camera + Zoom, Autofocus
Lens
Narrow field of visi o n Color FZ-SZC15
Digital Cameras 2 million pixels Color FZ-SC2M
Lens required
Monochrome FZ-S2M
Digital Cameras 300,000-pixels Color FZ-SC
Monochrome FZ-S
Small Digital Cameras 300,000-pixel flat type Color FZ-SFC
Monochrome FZ-SF
Small Digital Cameras 300,000-pixel pen type Color FZ-SPC
Monochrome FZ-SP
High-speed Cameras 300,000-pixels Color FZ-SHC
Monochrome FZ-SH
Appearance Type Model Remarks
CCTV Lenses 3Z4S-LE Series ---
Extension Tubes ---
Low-disto rtion Lenses FZ-LEH5/LEH8/LEH12/LEH16/
LEH25/LEH35/LEH50/LEH75/
LEH100
Low distort ion lens for 2-milli on Pixel
Cameras
Lenses for Smal l Camer a FZ-LES3/LES6/LES16/LES30 Lens for 300,000-pixel Small Cameras
Extension Tubes for Small Camera FZ-LESR Extension Tubes for 300,00 0-pixel Small
Cameras
Intelligent Camera Diffusion Plate Wide field of vision FZ-SLC100-DL ---
Narrow field of vision FZ-SLC15-DL ---
8Ordering Information
Cables
Note: 1. This Cable has an L-shaped connect or on the Cam era end.
2. The 10-m Cable cannot be used for the Intelligent Camera and Autof oc us Camera.
3. The 10-m Cable cannot be used for the Intelligent Camera, Autofocus Camera and 2 Million-pixel Camera.
4. The 15-m Cable cannot be used for the Intelligent Camera and Autof oc us Camera.
5. Connector-Te rmin al Bloc k Conv ers ion Uni ts can be connec t ed (R eco mm ended Products: OMRO N XW 2B-50G4/50G5, XE2 D-
50G6).
Peripheral devices
Appearance Type Cable length: Model Remarks
Camera Cable 2m, 5m, 10m (See note 2) FZ-VS ---
Bend resistant Camera
Cables 2m, 5m, 10m (See note 3) FZ-VSB ---
Right-angle Camera Cable
(See note 1) 2m, 5m, 10m (See note 2) FZ-VSL ---
Long-distance Camera
Cable 15m (See note 4) FZ-VS2 ---
Long-distance Right-angle
Camera Cable 15m (See not e 4) FZ-VSL2 ---
Cable Extension Unit Maximum cable length: 45 m
(Up to two Exten sion Units and three
Cables can be connected.) FZ-VSJ ---
Monitor Cable 2m, 5m FZ-VM ---
Paralle l C able 2m, 5m FZ-VP ---
2m, 5m, Connector-ty pe FZ-VPX (See note 5) ---
Appearance Type Model Remarks
LCD Monitor FZ-M08 ---
USB Memory FZ-MEM1G Capacity: 1 GB
Strobe Controller For 3Z4S-LT Ser ies One channel Manufactured by MORITEX
Corporation
3Z4S-LT MLEK-C100 E1TS2 Required t o contro l extern al lig hting
from a Cont roller
Strobe Controller For FZ-LT Series One channel FZ-LTA100
Two channels FZ-LTA200
--- Mouse --- ---
--- External Lighting 3Z4S-LT Serie s ---
FZ-LT Series ---
9
Ratings and Performance
Lite Controller
Note: 1. The number of logged images will vary when connecting multiple Cameras with different models.
2. Do not ground the positive te rminal of the 24-VDC power suppl y to the Lite Con troll er.
If the positive terminal is grounded, electrical shock may occur when an SG (0-V) part, such as the case of the Controller or Camera,
is touched.
3. The current consumption when the maximum number of Cameras supported by each Controller are connected. If a strobe Controller
model is connected to a lamp, the current consumption is as high as when an Intelligent Camera is connected.
Model NPN FZ3-L350 FZ3-L350-10
PNP FZ3-L355 FZ3-L355-10
No. of Cameras 24
Processing
resolution
With Intelligent Compact Camera 752 (H) × 480 (V)
When connected to a 300,000-pixel camera 640 (H) × 480 (V)
When connect ed to a 2 million-pixel camera 1600 (H) × 1200 (V)
Main functio ns
Processing Items
Inspections / Measurement
Search, Flexible Search, Sens it ive Search, ECM Search, Ec Circl e Search,
Classi fication, Edge Position, Edge Pitc h, Scan Edge Position,
Scan Edge Width , Color Data, Grav ity and Area, Label ing, Label Data, Defect,
Precise Defect, Fine Matching, Character Inspection, Date Verification,
Model Dictionary, Circle Angle
Image Capturing Camera image Input, Camera Image Input HDR, Camera Imag e Input HDR
Lite, Camera Switching, Measureme nt I m age Switching
Correcting images Position Compensation, Filtering, Backgrond Suppression, Color Gray Filter,
Extract Color Filter, Anti Color Shading, Polar Transformation
Assisting inspections /
measurement
Calcul ation, Line Reg ression, Cir cle Regressi on, Set Unit Data , Get Unit Data,
Set Unit Figure , Get Unit Figure, Trend Monito r, Image Logging, Dat a Logging,
Elapsed Ti me, Wait, Foc us, Iris
Branching processing Conditional Branch, End, DI Branch
Outputting results Serial data output, Parallel data output, Parall el judgement output, Fieldbus
data output
Displaying results onthe monitor Result Display, Display Image Fil e, Display Last NG Image
Number of sim ultaneous inspecti ons1 No limit to setting (as permitted by memory capacity)
Position comp e n sation Yes
(flexib le combi nation wi th proc essing i tems fo r inspec tions a nd measur ements)
Number of re gistered scenes 32
Number of
logged images
(See note 1.)
With Intelligent
Compact Camera
Connected to 1 camera 214
Connected to 2 cameras 107
Connected to 3 cameras 71
Connected to 4 cameras 53
When connect ed
to a 300,000-pixel
camera
Connected to 1 camera Color Camera: 250, Monochrome Camera: 252
Connected to 2 cameras Color Camera: 125, Monochrome Camera: 126
Connected to 3 cameras Color Camera: 83, Monochrome Camera: 84
Connected to 4 cameras Color Camera: 62, Monochrome Camera: 63
When connect ed
to a 2 mi lli on-pix el
camera
Connected to 1 camera Color Camer a: 40, Monochr ome Camera: 40
Connected to 2 cameras Color Camera: 20, Monochrome Camera: 20
Connected to 3 cameras Color Camera: 13, Monochrome Camera: 13
Connected to 4 cameras Color Camera: 10, Monochrome Camera: 10
I/O
specifications
Serial communi cations RS-232C 1CH
Network communications Ethernet 1000BASE-T/100BASE -TX/ 10BASE-T
EtherNet/IP Ethernet port baud rate: 100 Mbps (100Base-TX)
Parallel I/O 11 inputs (RESET, STEP, DSA, and DI 0 to 7), 26 outputs
(RUN, BUSY, GATE, OR, READY, ERROR, STGOUT 0 to 3, and DO 0 to 15 )
Monito r in te rfac e Analog RGB vid eo output, 1 channel
(Resolu ti on: XGA 1,024 × 768 dots)
USB interface 2 channels (supports USB 1.1 and 2.0)
Operation Mouse or similar de vice
Settings Create series of proc essing steps by editing the flowchart
(Help mess ages provided).
Ratings
Power supply voltage (See note 2.) 20.4 to 26.4 VDC
Current
consumption
(See note 3.)
(at 24.0 VDC)
With Inte l lig e n t C ompact C amera 4.0 A max. 5.5 A max.
When conne cted to a intelligent or
auto focus camera
When co nnected to a 300 ,000-p ixel
camera 2.6 A max. 2.9 A max.
When connected to a 2 million-
pixel camera
Environmental
immunity
Ambient temperature range Operating: 0 to 50 °C, Storage: −25 to 65 °C (with no icing or condensation)
Ambient humidity range Operating and storage: 35% to 85% (with no condensation)
Ambient atmosphere No corrosive gas
Degree of protection IEC 60529 IP20
Materials Plati ng steel board
Weight Approx. 1.8kg
Accessories Instructi on Manual
10 Ratings and Performance
LCD Monitor Monitor Cable
Intelligent Compact Camera
System configuration
Model FZ-M08
Size 8.4 inches
Type Liquid crystal color TFT
Resolution 1,024×768 dots
Input signal Analog RGB video input, 1 channel
Power supply voltage 21.6 to 26.4 VDC
Current cons um pti on Approx. 0.7 A max.
Ambient temperature
range Operat ing: 0 to 50 °C, Stor age: −25 to 65 °C
(with no icing or condensation)
Ambient hum idity range Operating and storage: 35% to 85%
(with no cond ensation)
Weight Approx. 1.2 kg
Accessories Instruction Sheet and 4 mounting brackets
Model FZ-VM
Vibration resistiveness 10 to 150 Hz singl e amplitude 0.15 mm 3
directi ons, 8 strokes, 4 times
Ambien t temperature
range Operati on: 0 to +50 °C, Storag e: −20 to +65 °C
(with no icing or condensation)
Ambient humidity range Operat ion and storage: 35% to 85%RH
(with no condensation)
Ambient at m osphere No corrosive gases
Material Cable sheath: heat-resistant PVC
Connector: PVC
Minimum bending radius 75 mm
Weight approx.170 g
Model FZ-SQ010F FZ-SQ050F FZ-SQ100F FZ-SQ100N
Field of vision 7.5×4.7 to 13×8.2 mm 13×8.2 to 53×33 mm 53×33 to 240 ×153 mm 29×18 to 300 ×191 mm
Instal lat ion distance 38 to 60 mm 56 to 215 mm 220 to 970 mm 32 to 380 mm
Image input
Image processing method Real color
Image elem ents 1/3- inch color CMOS
Shutter 1/250 to 1/32258
Processing resolution 752 (H) × 480 (V)
Partial functi o n 8 to 752 lines
Lighting
Lighti ng me thod Pulse
Lighti ng color White
LED class Class 2
Environmental
immunity
Ambient t emperature range Operating: 0 to 50 °C, Storage: −25 to 65 °C (with no icing or condensati on)
Ambient humidity range Operating and storage: 35% to 85% (with no condensation)
Ambient atmosphere No corrosive gas
Degree of protection IEC 60529 IP40 ( w it h Polarizing Filter Attachment mounted.)
Materials Camer a: PBT, PC, SUS
Mounting Bracket: PBT
Polarizing Filter Attachment: PBT, PC
Weight Appr ox. 160 g Approx. 150 g
Accessories
•Mounting Bracket (FQ-XL) (1)
•Polarizing Filter Attachment (FQ- XF1) (1)
•Instr u ction Manual
•Member regi stration sheet
Mouse
USB connection
Analogue RGB
Input device
Camera connected
RS-232C
Parallel I/O
Ethernet
PC
PLC
RGB Monitor
11
Dimensions (Unit: mm)
Controllers
Inte ll ig e nt Co mpact Ca m e ra
LCD Moni tor
Refer to the FZ3-900-series Catalog (Cat. No. Q171-E1) fo r information on the ratings and performance of Intelligent Cameras, H igh-speed Cameras,
Compact Digital Cameras, Camera Cables, and Peripheral Devices.
The 2-camera type has only two
camera connectors on its left side.
182.3
80
19712
FZ3-L35@
FZ3-L35@-10
1
20±0.1
(57)
11
(94.8)
44
Mounting Bracket
(See Note.)
1/4-20UNC
Depth: 6
Four-M4
Depth: 6
46
45
67
Optical
axis
Note. The Mounting Bracket can be mounted to either side.
Mounting Hole Dimensions
8
9
(4.8)32
20
Polarizing
Filter
Attachment
20
Tightening torque: 1.2 N.m
Two,
4.5-dia. holes
1
Polarizing
Filter
Attachment
(49)
3
(94.8)
44
Mounting Bracket
(See Note.)
1/4-20UNC
Depth: 6
Four-M4
Depth: 6
46
45
67
Optical
axis
8
9
(4.8)32
20
20
Two,
4.5-dia. holes
20±0.1
Mounting Hole Dimensions
Tightening torque: 1.2 N.m
Note. The Mounting Bracket can be mounted to either side.
Narrow View and Standard
FZ-SQ010F
FZ-SQ050F
Wide View
FZ-SQ100F (Long-distance)
FZ-S Q100 N (Short-dist ance)
Four, M4
(31.5)
40
Mountable plate thickness:
1.6 to 5.0 mm
26
75
75
(90)
220
(130)
(172)
230
(85.5)
(103.5)
(6)
171
(129.4)
(12.5)
(38)161 (173.4)(185)
FZ-M08
12 Optical Chart
Intelligent Compact Camera
Intelligent Cameras, Autofocus Cameras
Narrow View
Wide View
* Field of Vision
The images displayed on the monitor will be rectangular images of 640×480 pixels. The valid processing area for measurements is the
480×480-pixel area in the middle.
The above figures show the dimensions of the middle 480×480 pixels.
3860
7.5
13
8.2
0
4.7
Field of vision
to
056
215
13
53
8.2
33
to
Field of vision
0220
970
53
240
33
153
to
Field of vision
032
380
29
300
18
191
to
Field of vision
Narrow View
FZ-SQ010F
Standard
FZ-SQ050F
Wide View (Long-distance)
FZ-SQ100F
Wide View (Short-distance)
FZ-SQ100N
35 55
2.9 to 3.1
13.8 to 14.9
13.8 to 14.9
0
2.9
to 3.1
Field of vision
to
FZ-SLC15 FZ-SZC15
47.5 67.5
2.9 to 3.1
13.8 to 14.9
13.8 to 14.9
0
2.9
to 3.1
Field of vision
to
FZ-SLC100 FZ-SZC100
070
190
12.6 to 52
29 to 100
12.6 to 52
29 to 100
to
Field of vision
077.5
197.5
12.6 to 52
29 to 100
12.6 to 52
29 to 100
to
Field of vision
13
2 Million-pixel Digital Camera
FZ-S@2M
300,000-pixel Small Digital Cameras
FZ-SF@, FZ-SP@
FZ-LEH5
FZ-LEH8
FZ-LEH12
FZ-LEH16
FZ-LEH25
FZ-LEH35
FZ-LEH50
FZ-LEH75
FZ-LEH100
30
100
1000
10000
107 100 1000
Field of vision (mm)
t1.5 t1
t0
t5
t2 t1
t0
t5
t2
t1
t0
t10
t2
t1
t0
t10 t5
t2
t1
t0
t10 t5 t2 t1
t15 t10
t0
t35 t30 t25
t45 t40
t5
t1
t0
t15
Camera distance (mm)
t30
t50
t25
t40
t30
t35
t5
t20
t15
t20
t5
t10
t0
t0
t0.5
t10 t5
t15
t10
t25 t20
t2
t1
t20 t15
t2
t0.5
The 5-mm Extension Tubes (3Z4S-LE ML-EXR) cannot be used with FZ-LEH25 Lenses.
1
t20 t15
t40
t45
t50
t60
t5 t0
t0
t0
10 100 1000
10
100
1000
10000
FZ-LES30
FZ-LES16
FZ-LES6
FZ-LES3
t10
t15
t20
t25
t30
t35
t55 t5
t10
t0
Field of vision (mm)
WD (See Note.1) (mm)
Note: 1.
The vertical axis represents WD, not installation distance.
14 Optical Chart
300,000-pixel High-speed Camera, and Digital Camera
FZ-SH@, FZ-S@
■ Meaning of Optical Chart
The X axis of the optical chart shows the field of vision (mm ) (Note1),
and the Y axis of the optical chart shows the camera installation distance (mm) (Note2).
30
100
1000
10000
3 10 100 1000
ML-0614
3Z4S-LE
ML-0813
ML-1214
ML-1614
ML-2514
ML-3519
ML-5018
ML-7527
ML-10035
t0
t0
t20
t50
t5 t2
t1
t25t20 t15 t10
t2
Camera distance (mm)
Field of vision (mm)
t40
t45
t50
t60
t35 t30
t40
t45 t30
t15 t5
t1.5 t1
t1.5 t1
t35
t40 t20
t30
t35 t25
t20
t25 t10
t15
t10
t20
t25
t15 t15
t5 t5
t10
t10
t10
t5 t2
t1.5 t0.5
t1 t0.5
t1
t1.5
t1
t1.5
t2 t0.5
t0.5
t2 t0.5
t0.5
t1
t0.5
t2
t1.5
t2
t0
t0 t0 t0 t0
t0
t0
t5
Camera
distance
(mm)
Field of vision (mm)
Extension Tube
thickness: t (mm)
Lens
Camera
Field of
vision
Y
X
WD
(mm)
Note: 1. The lengths of the fields of vision given in the optical ch arts are th e lengt hs of the Y axis.
2. The vertical axis repres ent s WD for small ca mer as.
READ AND UNDERSTAND THIS DOCUMENT
Please read and understand this document before using the products. Please consult your OMRON representative if you have any questions or comments.
WARRANTY
OMRON’s exclusive warranty is that the produ cts are free from defects in ma teria ls and workm anship for a per iod of one year (or other per iod if
specified) from date of sale by OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR
FITNESS FOR PARTICULAR PURPOSE OF THE PR ODUCTS. AN Y BUYER OR USER A C KNO W LEDGES THAT THE BUYER OR USER ALONE HAS
DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER
W AR RANTIES, EXPRESS OR IMPLIED .
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN
ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY.
In no event shall respon sibil ity of OMRON for any act exceed the individual price of the produ ct on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDIN G THE PRODUCT S UNLESS
OMRON’S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND
NOT SU BJE CT TO CONTAMINATI ON, ABUSE , MISUSE, OR INAPPROPRIATE MO DIF ICATION OR REPAIR.
SUITABILITY FOR USE
THE PRODUCTS CO NTAINED IN THIS DOCUMENT ARE NOT SAFETY RATED. TH EY ARE NOT DESIGNED OR RATED FOR ENSURING
SAFETY OF PERSONS, AND SHOULD NOT BE RELIED UPON AS A SAFETY COMPONENT OR PROTECTIVE DEVICE FOR SUCH
PURPOSES. Please refer to separate catalogs for OMRON's saf ety rated products.
OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the
customer’s application or use of the product.
At the cust omer’s request, OMRON will provid e applic able third party cert ification document s identif ying ratings and lim itations of use t hat apply
to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end
product, machine, system, or other application or use.
The following are some examples of applications for which particular attention mu st be given. This is not intended t o be an exhaustive list of all
possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the prod ucts :
• Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not descr ibed in this document.
• Nuclear energy control sys tems, c ombustion systems, railroad sys te ms, aviation sy stem s, medical equipm ent , amusem ent m ac hines, vehicles,
safety equipment, and installations subject to separate industr y or government regulat ions.
• Systems, machines, and equipment that coul d prese nt a r is k to life or proper t y.
Please know and observe all prohibitions of use applicable to the products.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT
THE SYSTEM AS A W HOLE HAS BEEN D ESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED
AND INSTALLE D F OR THE INTE NDED USE WITHI N THE OVERALL EQUIPMENT OR SYSTEM.
PERFORMANCE DATA
Performanc e data given in t his d ocument is p rovided as a gu ide for the us er in d eter mining suit ability an d d oes n ot cons titute a warranty. It may
represent the result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual perf ormance is s ubjec t
to the OMRON Warranty and Limitat ions of Liabi lity.
CHANGE IN SPECIFICATIONS
Product specifications and accessories ma y be changed at any time based on improvements and other reasons.
It is our p ractice to change m odel numbers wh en published ratings or features are ch anged, or when significant co nstruction c hanges are made.
However, some specification s of the product may be changed without any notice. When in doubt, spec ial model numbers m ay be assigned to fix
or establish key specifications for your application on your request. Please consult with your OMRON representative at any ti me to confirm actual
specifications of purchas ed products.
DIMENSIONS AND WEIGHTS
Dimensions and weight s are nominal and are not to be used for manufactur ing purposes, even when tolerances are shown.
ERRORS AND OMISSIONS
The information in th is document has been ca refully checked a nd is believed to be ac curate; however, no responsibility is assumed for clerical,
typographical, or proofreading errors, or omissions.
PROGRAMMABLE PRODUCTS
OMRON shall not be responsible for the user’ s programming of a programmable product, or any consequence thereof.
COPYRIGHT AND COPY PERMISSION
This document shall not be copied for sales or promotions without per m ission.
This document is protected by copyright and is intended solely for use in conjunction with the product. Please notify us before copying or reproducing this
document in any manner, for any other purpose. If copying or transmitting this document to another, please copy or transmit it in its entirety.
Authorized Distributor:
In the interest of product improvement,
specifications are subject to change without notice.
Cat. No. Q182-E1-01 Printed in Japan
1210 (1210) (W)
© OMRON Corporation 2009 All Rights Reserved.
OMRON Corporation Industrial Automation Company
OMRON ELECTRONICS LLC
One Commerce Drive Schaumburg,
IL 60173-5302 U.S.A.
Tel: (1) 847-843-7900/Fax: (1) 847-843-7787
Regional Headquarters
OMRON EUROPE B.V.
Wegalaan 67-69-2132 JD Hoofddorp
The Netherlands
Tel: (31)2356-81-300/Fax: (31)2356-81-388
Contact: www.ia.omron.com
Tokyo, JAPAN
OMRON ASIA PACIFIC PTE. LTD.
No. 438A Alexandra Road # 05-05/08 (Lobby 2),
Alexandr a Technopark,
Singapore 119967
Tel: (65) 6835-3011/Fax: (65) 6835-2711
OMRON (CHINA) CO., LTD.
Room 2211, Bank of China Tower,
200 Yin Cheng Zhong Road,
PuDong New Area, Shanghai, 200120, China CSM_1_2_0311
Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200
