1N5913B
THRU
1N5942B
1.5 Watt
Zener Diode
3.3 to 51 Volts
DO-41G
Features
• Wide Voltage Range Available
• Glass Package
• High Temp Soldering: 260°C for 10 Seconds At Terminals
Maximum Ratings
• Operating Temperature: -55°C to +150°C
• Storage Temperature: -55°C to +150°C
• 1.5 Watt DC Power Dissipation
• Power Derating: 12 mW/°C above 75°C
• Forward Voltage @ 200mA: 1.2 Volts
DIMENSIONS
INCHES MM
DIM MIN MAX MIN MAX NOTE
A .166 .205 4.10 5.20
B .080 .107 2.00 2.70
C .028 .034 .70 .90
D 1.000 --- 25.40 ---
Figure 2 - Derating Curve
Power Dissipation (mW) - Versus - Temperature °C
Temperature °C
0 50 100 150
W
1.0
2.0
Typical Capacitance (pf) – versus – Zener voltage (VZ)
Figure 1 - Typical Capacitance
0100 200
1
10
1
00
pf
VZ
At zero volts
At –2 Volts VR
A
B
C
D
D
Cathode
Mark
Revision: 9 2008/01/01
omponents
20736 Marilla Street Chatsworth
!"#
$% !"#
MCC TM
Micro Commercial Components
• Marking : Cathode band and type number
www.mccsemi.com
1 of 3
ELECTRICAL CHARACTERISTICS @25°C
MCC
PART
NUMBER
ZENER
VOLTAGE
VZ
TEST
CURRENT
IZT
MAXIMUM
DYNAMIC
IMPEDANCE ZZT
@ IZT
KNEE
CURRENT
IZK
KNEE
IMPEDANCE ZZK
MAXIMUM
REVERSE
CURRENT
IR
REVERSE
VOLTAGE
VR
MAXIMUM
DC CURRENT
IZM
VOLTS mA OHMS mA OHMS µA VOLTS mA
1N5918B 5.1 73.5 4.0 1.0 350 5.0 2.0 294
1N5919B 5.6 66.9 2.0 1.0 250 5.0 3.0 267
1N5920B 6.2 60.5 2.0 1.0 200 5.0 4.0 241
1N5921B 6.8 55.1 2.5 1.0 200 5.0 5.2 220
1N5922B 7.5 50 3.0 0.5 400 5.0 6.0 200
1N5923B 8.2 45.7 3.5 0.5 400 5.0 6.5 182
1N5924B 9.1 41.2 4.0 0.5 500 5.0 7.0 164
1N5925B 10 37.5 4.5 0.25 500 5.0 8.0 150
1N5926B 11 34.1 5.5 0.25 550 1.0 8.4 125
1N5927B 12 31.2 6.5 0.25 550 1.0 9.1 125
1N5928B 13 28.8 7.0 0.25 550 1.0 9.9 115
1N5929B 15 25 9.0 0.25 600 1.0 11.4 100
1N5930B 16 23.4 10 0.25 600 1.0 12.2 93
1N5931B 18 20.8 12 0.25 650 1.0 13.7 83
1N5932B 20 18.7 14 0.25 650 1.0 15.2 75
1N5933B 22 17 17.5 0.25 650 1.0 16.7 68
1N5934B 24 15.6 19 0.25 700 1.0 18.2 62
1N5935B 27 13.9 23 0.25 700 1.0 20.6 55
1N5936B 30 12.5 28 0.25 750 1.0 22.8 50
1N5937B 33 11.4 33 0.25 800 1.0 25.1 45
1N5938B 36 10.4 38 0.25 850 1.0 27.4 41
1N5939B 39 9.6 45 0.25 900 1.0 29.7 38
1N5940B 43 8.7 53 0.25 950 1.0 32.7 34
1N5941B 47 8.0 67 0.25 1000 1.0 35.8 31
1N5913B thru 1N5942B MCC
www.mccsemi.com
2 of 3
Revision: 9 2008/01/01
TM
Micro Commercial Components
1N5913B 3.3 113.6 10 1.0 500 100 1.0 454
1N5942B 51 7.3 70 0.25 1100 1.0 38.8 29
1N5914B 3.6 104.2 9.0 1.0 500 75 1.0 416
1N5915B 3.9 96.1 7.5 1.0 500 25 1.0 384
1N5916B 4.3 87.2 6.0 1.0 500 5.0 1.0 348
1N5917B 4.7 79.8 5.0 1.0 500 5.0 1.5 319
Note 1: No suffix indicates a 20% tolerance on nominal VZ, Suffix A denotes a 10% tolerance, B denotes a 5%
tolerance, C denotes a 2%, and D suffix denotes a 1% tolerance.
2: Zener voltage(VZ) measured at TL = 30oC. Voltage measurement to be performed 20 seconds after
application of DC current.
3: The Zener impedance is derived from the 60 Hz ac voltage, which results when an ac current having an
rms value equal to 10% of the DC Zener current(IZT or IZK) is superimposed on IZT or IZK.
MCC
Revision: 9 2008/01/01
TM
Micro Commercial Components
www.mccsemi.com
3 of 3
products are represented on our website, harmless against all damages.
***APPLICATIONS DISCLAIMER***
***IMPORTANT NOTICE***
Aerospace or Military Applications.
Products offer by Micro Commercial Components Corp .are not intended for use in Medical,
Micro Commercial Components Corp .reserves the right to make changes without further notice to any
product herein to make corrections, modifications , enhancements , improvements , or other changes .
Micro Commercial Components Corp .does not assume any liability arising out of the application or
use of any product described herein; neither does it convey any license under its patent rights ,nor
the rights of others . The user of products in such applications shall assume all risks of such use
and will agree to hold Micro Commercial Components Corp .and all the companies whose
Ordering Information
Device Packing
(Part Number)-TP Tape&Reel; 5Kpcs/Reel
(Part Number)-AP Ammo Packing;2.5Kpcs/AmmoBox
(Part Number)-BP Bulk;1Kpcs/Box
