MKT470 Vishay BCcomponents Metallized Polyester Film Capacitors MKT Radial Potted Type FEATURES 168x12(halfpage) l Pitch 5 mm available loose in box, ammopack and taped on reel. w Compliant to RoHS Directive 2002/95/EC CAPACITANCE RANGE (E12 SERIES) h 0.001 F to 1.2 F RATED (DC) VOLTAGE lt 63 V; 100 V; 250 V; 400 V Odt P0.3 Dimensions in RATED (AC) VOLTAGE 40 V; 63 V; 160 V; 200 V APPLICATIONS CLIMATIC CATEGORY Blocking, coupling and decoupling. Bypass and energy reservoir 55/125/56 MARKING RATED TEMPERATURE C-value; tolerance; rated voltage; year and week of manufacturer; manufacturer's type designation, manufacturer's logo, location MAXIMUM APPLICATION TEMPERATURE 125 C DIELECTRIC REFERENCE SPECIFICATIONS Polyester film IEC 60384-2 ELECTRODES Vacuum deposited aluminum PERFORMANCE GRADE Grade 1 (long life) ENCAPSULATION Flame retardant plastic case and epoxy resin (UL-class 94 V-0) CONSTRUCTION 85 C DETAIL SPECIFICATION For more detailed data and test requirements contact: dc-film@vishay.com Wound mono construction LEADS Tinned wire CAPACITANCE TOLERANCE 10 %; 5 % Document Number: 28112 Revision: 26-Apr-11 For technical questions, contact: dc-film@vishay.com www.vishay.com 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT470 Metallized Polyester Film Capacitors MKT Radial Potted Type Vishay BCcomponents COMPOSITION OF CATALOG NUMBER MULTIPLIER (nF) TYPE AND PITCHES 470 5.0 mm CAPACITANCE (numerically) 0.1 2 1 3 10 4 100 5 Example: 104 = 10 x 10 = 100 nF 2222 470 BFC2* 470 TYPE 470 PACKAGING ammopack XX XX X XX XX X LEAD CONFIGURATION H 18.5 mm; P0 12.7 mm * Use this part number for those with access to the Vishay's SAP system and Partners website within the Americas PREFERRED TYPES C-TOL. 63 V 100 V 250 V 400 V 10 % 75 85 35 65 5 % 76 86 36 66 ON REQUEST lead length 4.0 1.0/0.5 mm loose in box lead length 26.0 2.0 mm 470 taped on reel H 18.5 mm; P0 12.7 mm; reel diameter 356 mm 10 % 11 21 41 51 5 % 12 22 42 52 10 % 15 25 45 55 5 % 16 26 46 56 10 % 18 28 48 58 5 % 19 29 49 59 Note * For detailed tape specification refer to packaging information www.vishay.com/doc?27139 SPECIFIC REFERENCE DATA DESCRIPTION Tangent of loss angle: C 0.1 F 0.1 F C 0.47 F 0.47 F C 1.2 F Rated voltage pulse slope (dU/dt)R at VALUE at 1 kHz 60 x 10-4 60 x 10-4 60 x 10-4 63 VDC 100 V/s at 10 kHz 120 x 10-4 120 x 10-4 120 x 10-4 100 VDC 160 V/s R between leads, for C 0.33 F: at 10 V; 1 min 15 000 M at 100 V; 1 min 15 000 M RC between leads, for C > 0.33 F at 10 V; 1 min 5000 s at 100 V; 1 min 5000 s R between interconnected leads and > 30 000 M > 30 000 M casing (foil method) Withstanding (DC) voltage (cut off current 100 V; 1 min 160 V; 1 min 10 mA) (2); rise time 1000 V/s Withstanding (DC) voltage between leads 200 V; 1 min 200 V; 1 min and case Notes (1) Only for 250 V and 400 V for C 0.01 F (2) See "Voltage Proof Test for Metalized Film Capacitors": www.vishay.com/doc?28169 www.vishay.com 2 For technical questions, contact: dc-film@vishay.com at 100 kHz 200 x 10-4 200 x 10-4 250 VDC 400 V/s at 1 MHz 250 x 10-4 (1) 400 VDC 800 V/s 15 000 M 15 000 M > 30 000 M > 30 000 M 400 V; 1 min 640 V; 1 min 500 V; 1 min 800 V; 1 min Document Number: 28112 Revision: 26-Apr-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT470 Metallized Polyester Film Capacitors MKT Radial Potted Type Vishay BCcomponents URdc = 63 V; URac = 40 V CATALOG NUMBER 2222 470 ... AND PACKAGING C (F) DIMENSIONS WxHxL (mm) AMMOPACK (2) MASS (g) REEL (2) H 18.5 mm (1) C-tol. = 10 % C-tol. = 5 % last 5 digits of catalog number last 5 digits of catalog number SPQ SPQ Pitch = 5.0 0.3 mm; dt = 0.50 0.05 mm 75683 76683 0.068 0.082 75823 76823 2000 2000 2.5 x 6.5 x 7.2 0.25 75104 76104 0.1 0.12 75124 76124 75154 76154 0.15 0.18 75184 76184 0.22 75224 76224 3.5 x 8.0 x 7.2 0.35 1500 1500 0.27 75274 76274 75334 76334 0.33 0.39 75394 76394 0.47 75474 76474 4.5 x 9.0 x 7.2 0.45 0.56 75564 76564 1000 1000 75684 76684 0.68 0.82 75824 76824 75105 76105 1 6.0 x 11.0 x 7.2 0.60 750 1000 1.2 75125 76125 Notes (1) Net weight for short lead product only (2) H = In-tape height; P = Sprocket hole distance; for detailed specifications refer to Packaging Information 0 * SPQ = Standard packing quantity LOOSE IN BOX short leads long leads SPQ SPQ 2000 1000 2000 1000 2000 1000 2000 1000 URdc = 100 V; URac = 63 V CATALOG NUMBER 2222 470 ... AND PACKAGING C (F) DIMENSIONS WxHxL (mm) AMMOPACK (2) MASS (1) (g) REEL (2) H 18.5 mm C-tol. = 10 % C-tol. = 5 % last 5 digits of catalog number last 5 digits of catalog number SPQ SPQ Pitch = 5.0 0.3 mm; dt = 0.50 0.05 mm 85223 86223 0.022 0.027 85273 86273 0.033 85333 86333 2000 2000 2.5 6.5 7.2 0.25 0.039 85393 86393 85473 86473 0.047 0.056 85563 86563 85683 86683 0.068 0.082 85823 86823 1500 1500 3.5 8.0 7.2 0.35 85104 86104 0.1 0.12 85124 86124 85154 86154 0.15 0.18 85184 86184 1000 1000 4.5 9.0 7.2 0.45 85224 86224 0.22 0.27 85274 86274 85334 86334 0.33 6.0 11.0 7.2 0.65 750 1000 0.39 85394 86394 85474 86474 0.47 Notes (1) Net weight for short lead product only (2) H = In-tape height; P = Sprocket hole distance; for detailed specifications refer to Packaging Information 0 * SPQ = Standard packing quantity Document Number: 28112 Revision: 26-Apr-11 For technical questions, contact: dc-film@vishay.com LOOSE IN BOX short leads long leads SPQ SPQ 2000 1000 2000 1000 2000 1000 2000 1000 www.vishay.com 3 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT470 Vishay BCcomponents Metallized Polyester Film Capacitors MKT Radial Potted Type URdc = 250 V; URac = 160 V C (F) DIMENSIONS WxHxL (mm) MASS (1) (g) CATALOG NUMBER 2222 470 ... AND PACKAGING REEL (2) LOOSE IN BOX AMMOPACK (2) H = 18.5 mm short leads long leads C-tol. = 10 % C-tol. = 5 % last 5 digits of last 5 digits of SPQ SPQ SPQ SPQ catalog number catalog number Pitch = 5.0 0.3 mm; dt = 0.50 0.05 mm 0.01 35103 36103 0.012 35123 36123 2.5 x 6.5 x 7.2 0.25 2000 2000 0.015 35153 36153 0.018 35183 36183 0.022 35223 36223 0.027 35273 36273 3.5 x 8.0 x 7.2 0.35 1500 1500 0.033 35333 36333 0.039 35393 36393 0.047 35473 36473 4.5 x 9.0 x 7.2 0.45 0.056 35563 36563 1000 1000 0.068 35683 36683 0.082 35823 36823 0.1 6.0 x 11.0 x 7.2 0.60 750 1000 35104 36104 0.12 35124 36124 Notes (1) Net weight for short lead product only (2) H = In-tape height; P = Sprocket hole distance; for detailed specifications refer to Packaging Information 0 * SPQ = Standard packing quantity 2000 1000 2000 1000 2000 1000 2000 1000 URdc 400 V; URac 200 V C (F) DIMENSIONS WxHxL (mm) MASS (1) (g) CATALOG NUMBER 2222 470 ... AND PACKAGING REEL (2) LOOSE IN BOX AMMOPACK (2) H = 18.5 mm short leads long leads C-tol. = 10 % C-tol. = 5 % last 5 digits of last 5 digits of SPQ SPQ SPQ SPQ catalog number catalog number Pitch = 5.0 0.3 mm; dt = 0.50 0.05 mm 0.001 65102 66102 0.0012 65122 66122 0.0015 65152 66152 0.0018 65182 66182 0.0022 65222 66222 0.0027 65272 66272 2.5 x 6.5 x 7.2 0.25 2000 2000 0.0033 65332 66332 0.0039 65392 66392 0.0047 65472 66472 0.0056 65562 66562 0.0068 65682 66682 0.0082 65822 66822 0.01 65103 66103 3.5 x 8.0 x 7.2 0.35 0.012 65123 66123 1500 1500 0.015 65153 66153 0.018 65183 66183 0.022 4.5 x 9.0 x 7.2 0.45 1000 1000 65223 66223 0.027 65273 66273 0.033 65333 66333 6.0 x 11.0 x 7.2 0.60 0.039 65393 66393 750 1000 0.047 65473 66473 Notes (1) Net weight for short lead product only (2) H = In-tape height; P = Sprocket hole distance; for detailed specifications refer to Packaging Information 0 * SPQ = Standard packing quantity www.vishay.com 4 For technical questions, contact: dc-film@vishay.com 2000 1000 2000 1000 2000 1000 2000 1000 Document Number: 28112 Revision: 26-Apr-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT470 Metallized Polyester Film Capacitors MKT Radial Potted Type Vishay BCcomponents MOUNTING Normal Use The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting in printed-circuit boards by means of automatic insertion machines. For detailed tape specifications refer to: "Packaging Information": www.vishay.com/doc?28139 Specific Method of Mounting to Withstand Vibration and Shock In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the printed-circuit board: * For pitches 15 mm capacitors shall be mechanically fixed by the leads * For larger pitches the capacitors shall be mounted in the same way and the body clamped Space Requirements on Printed-Circuit Board The maximum space for length (Imax.), width (wmax.) and height (hmax.) of film capacitors to take in account on the printed circuit board is shown in the drawings. For products with pitch 15 mm, w = l = 0.3 mm and h = 0.1 mm Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. wmax. = W + Eccentricity Imax. = I + CBA116 hmax. = h + Seating plane SOLDERING For general soldering conditions and wave soldering profile, we refer to the application note: "Soldering Guidelines for Film Capacitors": www.vishay.com/doc?28171 Storage Temperature Storage temperature: Tstg = - 25 C to + 40 C with RH maximum 80 % without condensation Ratings and Characteristics Reference Conditions Unless otherwise specified, all electrical values apply to an ambient temperature of 23 C 1 C, an atmospheric pressure of 86 kPa to 106 kPa and a relative humidity of 50 % 2 %. For reference testing, a conditioning period shall be applied over 96 h 4 h by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20 %. Document Number: 28112 Revision: 26-Apr-11 For technical questions, contact: dc-film@vishay.com www.vishay.com 5 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT470 Metallized Polyester Film Capacitors MKT Radial Potted Type Vishay BCcomponents CHARACTERISTICS Capacitance as a function of frequency (typical curve) Capacitance as a function of ambient temperature (typical curve) 10 C/C (%) C/C (%) 2 1 kHz 1 5 0 -1 max. 0 -2 typical min. -3 2 10 10 3 10 4 f (Hz) 10 -5 -60 5 Impedance as a function of frequency (typical curve) 10 20 60 100 Tamb (C) Maximum DC and AC voltage as a function of temperature 2 63 63 V; 1 25 0V ;1 V; 1 00 F factor 1.2 Impedance () 10 -20 0n nF 1.0 F 0.8 0 0.6 10-1 0.4 10 -2 0.2 -3 10 4 10 10 5 10 7 f (Hz) 8 10 10 6 0.0 - 60 Maximum RMS voltage as a function of frequency 2 1 60 100 Tamb (C) 2 AC voltage (V) nF 0 nF 10 0 nF 22 70 nF 4 00 10 10 20 Maximum RMS current as a function of frequency 10 AC voltage (V) 10 - 20 10 1 nF 0 nF 10 0 nF 22 70 0 nF 4 0 10 85 C < Tamb 125 C, 63 VDC Tamb 85 C, 63 VDC 10 0 10 2 www.vishay.com 6 10 3 10 4 10 5 f (Hz) 10 6 10 0 10 2 10 3 For technical questions, contact: dc-film@vishay.com 10 4 10 5 f (Hz) 10 6 Document Number: 28112 Revision: 26-Apr-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT470 Metallized Polyester Film Capacitors MKT Radial Potted Type Maximum RMS voltage as a function of frequency 2 1 AC voltage (V) 2 10 nF 22 nF F 47 n nF 0 10 20 nF 2 70 4 nF 22 nF F 47 0 n nF 10 20 nF 2 70 4 10 Maximum RMS current as a function of frequency 10 AC voltage (V) 10 1 Tamb 85 C, 100 VDC 10 0 2 10 10 3 85 C < Tamb 125 C, 100 VDC 10 4 10 5 f (Hz) 10 6 10 0 10 2 10 Maximum RMS voltage as a function of frequency 3 10 10 10 10 22 nF n 1047 n F 0n F F 1 10 10 10 2 10 3 10 4 10 5 f (Hz) 10 6 3 10 1 0 10 2 10 10 2 10 3 Document Number: 28112 Revision: 26-Apr-11 3 10 4 10 5 f (Hz) 10 6 3 AC voltage (V) 1.0 2. nF 4.7 2 nF 10 nF 22 nF 47 nF nF 1 10 10 Maximum RMS current as a function of frequency 10 2 0 f (Hz) 10 6 10 2 nF 4 2n 10 7 nFF 0n F 2 1.0 2. nF 4.7 2 nF 10 nF 22 nF 47 nF nF 1 85 C < Tamb 125 C, 400 VDC Tamb 85 C, 400 VDC 10 5 85 C < Tamb 125 C, 250 VDC AC voltage (V) 10 10 2 Maximum RMS voltage as a function of frequency 10 4 AC voltage (V) 2 0 10 3 Tamb 85 C, 250 VDC 10 3 Maximum RMS current as a function of frequency 10 AC voltage (V) 10 Vishay BCcomponents 10 4 10 5 f (Hz) 10 6 10 0 10 2 10 3 For technical questions, contact: dc-film@vishay.com 10 4 10 5 f (Hz) 10 6 www.vishay.com 7 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT470 Vishay BCcomponents Metallized Polyester Film Capacitors MKT Radial Potted Type MAXIMUM RMS CURRENT (SINEWAVE) AS A FUNCTION OF FREQUENCY The maximum RMS current is defined by Iac = x C x Uac. Uac is the maximum AC voltage depending on the ambient temperature in the curves " Maximum RMS voltage and AC current as a function of frequency". Tangent of loss angle as a function of frequency (typical curve) 105 RC (s) Dissipation factor (x 10-4) 103 Insulation resistance as a function of ambient temperature (typical curve) 5 4 3 2 1 104 102 Curve 1: C = 0.33 F Curve 2: 0.33 F, C = 1.2 F Curve 3: 1.2 F, C = 3.9 F Curve 4: 3.9 F, C = 6.8 F Curve 5: C = 6.8 F 101 10 2 10 3 10 4 f (Hz) 10 5 Maximum allowed component temperature rise (T) as a function of the ambient temperature (Tamb) 103 102 - 60 - 20 20 60 100 Tamb (C) Maximum DC and AC voltage as a function of temperature T (C) 16 12 8 4 0 - 60 www.vishay.com 8 - 20 20 60 100 Tamb (C) For technical questions, contact: dc-film@vishay.com Document Number: 28112 Revision: 26-Apr-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT470 Metallized Polyester Film Capacitors MKT Radial Potted Type Vishay BCcomponents HEAT CONDUCTIVITY (G) AS A FUNCTION OF PITCH AND CAPACITOR BODY THICKNESS IN mW/C Wmax. (mm) HEAT CONDUCTIVITY (mW/C) 2.5 2.5 3.5 3.0 4.5 4.0 6.0 5.5 PITCH 5 mm POWER DISSIPATION AND MAXIMUM COMPONENT TEMPERATURE RISE The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of the free ambient temperature. The power dissipation can be calculated according type detail specification "HQN-384-01/101: Technical Information Film Capacitors". The component temperature rise (T) can be measured (see section "Measuring the Component Temperature" for more details) or calculated by T = P/G: T = Component temperature rise (C) P = Power dissipation of the component (mW) G = Heat conductivity of the component (mW/C) MEASURING THE COMPONENT TEMPERATURE A thermocouple must be attached to the capacitor body as in: Thermocouple The temperature is measured in unloaded (Tamb) and maximum loaded condition (TC). The temperature rise is given by T = TC - Tamb. To avoid radiation or convection, the capacitor should be tested in a wind-free box. Document Number: 28112 Revision: 26-Apr-11 For technical questions, contact: dc-film@vishay.com www.vishay.com 9 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT470 Metallized Polyester Film Capacitors MKT Radial Potted Type Vishay BCcomponents APPLICATION NOTE AND LIMITING CONDITIONS These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection, as described hereunder. These mains applications are strictly regulated in safety standards and therefore electromagnetic interference suppression capacitors conforming the standards must be used. For capacitors connected in parallel, normally the proof voltage and possibly the rated voltage must be reduced. For information depending of the capacitance value and the number of parallel connections contact: dc-film@vishay.com To select the capacitor for a certain application, the following conditions must be checked: 1. The peak voltage (UP) shall not be greater than the rated DC voltage (URDC). 2. The peak-to-peak voltage (UP-P) shall not be greater than 22 x URAC to avoid the ionization inception level. 3. The voltage pulse slope (dU/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and without ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by URDC and divided by the applied voltage. For all other pulses following equation must be fulfilled: T 2 dU dU 2 -------- dt U Rdc -------- dt rated dt 0 T is the pulse duration. The rated voltage pulse slope is valid for ambient temperatures up to 85 C. For higher temperatures a derating factor of 3 % per K shall be applied. 4. The maximum component surface temperature rise must be lower than the limits (see graph "Max. allowed component temperature rise"). 5. Since in circuits used at voltages over 280 V peak-to-peak the risk for an intrinsically active flammability after a capacitor breakdown (short circuit) increases, it is recommended that the power to the component is limited to 100 times the values mentioned in the table: "Heat Conductivity" 6. When using these capacitors as across-the-line capacitor in the input filter for mains applications or as series connected with an impedance to the mains the applicant must guarantee that the following conditions are fulfilled in any case (spikes and surge voltages from the mains or line card supply included). Voltage Conditions for 6 Above ALLOWED VOLTAGES Tamb 85 C 85 C < Tamb 100 C 100 C < Tamb 125 C URAC 0.8 x URAC 0.5 x URAC Maximum temperature RMS-overvoltage (< 24 h) 1.25 x URAC URAC 0.625 x URAC Maximum peak voltage (VO-P) (< 2 s) 1.6 x URDC 1.3 x URDC 0.8 x URDC Maximum continuous RMS voltage www.vishay.com 10 For technical questions, contact: dc-film@vishay.com Document Number: 28112 Revision: 26-Apr-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT470 Metallized Polyester Film Capacitors MKT Radial Potted Type Vishay BCcomponents INSPECTION REQUIREMENTS General Notes: Sub-clause numbers of tests and performance requirements refer to the "Sectional Specification, Publication IEC 60384-2 and Specific Reference Data". Group C Inspection Requirements SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C1A PART OF SAMPLE OF SUB-GROUP C1 4.1 Dimensions (detail) 4.3.1 Initial measurements As specified in chapters "General Data" of this specification Capacitance Tangent of loss angle for: C 10 nF at 1 MHz 10 nF < C 470 nF at 100 kHz C > 470 nF at 10 kHz No visible damage 4.3 Robustness of terminations Tensile: Load 10 N; 10 s Bending: Load 5 N; 4 x 90 4.4 Resistance to soldering heat Method: 1A Solder bath: 280 C 5 C Duration: 10 s 4.14 Component solvent resistance Isopropylalcohol at room temperature Method: 2 Immersion time: 5 min 0.5 min Recovery time: Min. 1 h, max. 2 h 4.4.2 Final measurements Visual examination No visible damage Legible marking Capacitance C/C| 2 % of the value measured initially Tangent of loss angle Increase of tan 0.005 for: C 10 nF or 0.003 for: 10 nF < C 470 nF or 0.002 for: C > 470 nF Compared to values measured in 4.3.1 SUB-GROUP C1B PART OF SAMPLE OF SUB-GROUP C1 4.6.1 Initial measurements 4.6 Rapid change of temperature 4.7 Vibration 4.7.2 Final inspection Document Number: 28112 Revision: 26-Apr-11 Capacitance Tangent of loss angle for: C 10 nF at 1 MHz 10 nF < C 470 nF at 100 kHz C > 470 nF at 10 kHz A = - 55 C B = + 125 C 5 cycles Duration t = 30 min Visual examination Mounting: See section "Mounting" of this specification Procedure B4 Frequency range: 10 Hz to 55 Hz Amplitude: 0.75 mm or Acceleration 98 m/s (whichever is less severe) Total duration 6 h Visual examination No visible damage No visible damage For technical questions, contact: dc-film@vishay.com www.vishay.com 11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT470 Metallized Polyester Film Capacitors MKT Radial Potted Type Vishay BCcomponents SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C1B PART OF SAMPLE OF SUB-GROUP C1 4.9 Shock 4.9.3 Final measurements Mounting: See section "Mounting" of this specification Pulse shape: Half sine Acceleration: 490 m/s Duration of pulse: 11 ms Visual examination Capacitance Tangent of loss angle Insulation resistance SUB-GROUP C1 COMBINED SAMPLE OF SPECIMENS OF SUB-GROUPS C1A AND C1B 4.10 Climatic sequence 4.10.2 Dry heat 4.10.3 4.10.4 Damp heat cyclic Test Db, first cycle Cold Damp heat cyclic Test Db, remaining cycles 4.10.6.2 Final measurements No visible damage C/C| 5 % for w = 2.5 mm or C/C| 3 % for w > 2.5 mm of the value measured in 4.6.1 Increase of tan : 0.005 for: C 10 nF or 0.003 for: 10 nF < C 470 nF or 0.002 for: C > 470 nF Compared to values measured in 4.6.1 As specified in section "Insulation Resistance" of this specification Temperature: + 125 C Duration: 16 h Temperature: - 55 C Duration: 2 h 4.10.6 Voltage proof = URDC for 1 min within 15 min after removal from test chamber Visual examination Capacitance Tangent of loss angle Insulation resistance No breakdown or flash-over No visible damage Legible marking C/C| 5 % of the value measured in 4.4.2 or 4.9.3 Increase of tan : 0.008 for: C 10 nF or 0.005 for: 10 nF < C 470 nF or 0.003 for: C > 470 nF Compared to values measured in 4.3.1 or 4.6.1 50 % of values specified in section "Insulation Resistance" of this specification SUB-GROUP C2 4.11 Damp heat steady state 56 days, 40 C, 90 % to 95 % RH 4.11.1 Initial measurements Capacitance Tangent of loss angle at 1 kHz 4.11.3 Final measurements Voltage proof = URDC for 1 min within 15 min after removal from test chamber No breakdown or flash-over Visual examination No visible damage Legible marking Capacitance |C/C| 5 % of the value measured in 4.11.1. Tangent of loss angle Increase of tan : 0.005 for: C 470 nF or 0.003 for: C > 470 nF Compared to values measured in 4.11.1 Insulation resistance 50 % of values specified in section "Insulation Resistance" of this specification www.vishay.com 12 For technical questions, contact: dc-film@vishay.com Document Number: 28112 Revision: 26-Apr-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT470 Metallized Polyester Film Capacitors MKT Radial Potted Type SUB-CLAUSE NUMBER AND TEST CONDITIONS Vishay BCcomponents PERFORMANCE REQUIREMENTS SUB-GROUP C3 4.12 Endurance Duration: 2000 h 1.25 x URDC at 85 C 0.625 x URDC at 125 C 4.12.1 Initial measurements Capacitance Tangent of loss angle for: C 10 nF at 1 MHz 10 nF < C 470 nF at 100 kHz C > 470 nF at 10 kHz 4.12.5 Final measurements Visual examination No visible damage Legible marking Capacitance |C/C| 5 % compared to values measured in 4.12.1 Tangent of loss angle Increase of tan : 0.005 for: C 10 nF or 0.003 for: 10 nF < C 470 nF or 0.002 for: C > 470 nF Compared to values measured in 4.12.1 Insulation resistance 50 % of values specified in section "Insulation Resistance" of this specification SUB-GROUP C4 4.13 Charge and discharge 10 000 cycles Charged to URDC Discharge resistance: UR R = --------------------------------------------C 5 dU dt R 4.13.1 Initial measurements Capacitance Tangent of loss angle for: C 10 nF at 1 MHz 10 nF < C 470 nF at 100 kHz C > 470 nF at 10 kHz 4.13.3 Final measurements Capacitance |C/C| 3 % compared to values measured in 4.13.1 Tangent of loss angle Increase of tan : 0.005 for: C 10 nF or 0.003 for: 10 nF < C 470 nF or 0.002 for: C > 470 nF Compared to values measured in 4.13.1 Insulation resistance 50 % of values specified in section "Insulation Resistance" of this specification Document Number: 28112 Revision: 26-Apr-11 For technical questions, contact: dc-film@vishay.com www.vishay.com 13 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000