DATA SHEET SMP1330 Series: Plastic Packaged Limiter Diodes Applications WLAN, WiMAX Cellular infrastructure RFID readers Test instruments Features Low-distortion design Description Limiter performance to 4 GHz and higher Low insertion loss Low-cost plastic package Packages rated MSL1 @ 260 C per JEDEC J-STD-020 Skyworks GreenTM products are compliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks Definition of GreenTM, document number SQ04-0074. The SMP1330 series of limiter diodes is designed for use as passive receiver protectors in wireless and other RF systems covering frequencies up to 4 GHz and higher. These diodes use Skyworks limiter diode technology to produce gold-doped, thin base limiters for low-loss, low-distortion performance and good limiter action. The SMP1330 series of diodes has been characterized in limiter circuits and tightly specified to ensure consistent performance. The absolute maximum ratings of the SMP1330 series are provided in Table 1. Table 1. SMP1330 Series Absolute Maximum Ratings Maximum Units Reverse voltage Parameter VR Symbol Minimum 20 V Forward current IF 100 mA CW incident power @ 25 C lead temperature Peak incident power @ 1% duty factor, 1 s pulse 1 W 100 W Power dissipation @ 25 C lead temperature PD 250 mW Storage temperature TSTG -65 +150 C Operating temperature TA -65 +150 C Note: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 200050I * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * November 5, 2013 1 DATA SHEET * SMP1330 SERIES DIODES Configurations The SMP1330 series of diodes are available in SOT-23 and SOD882 packages. As illustrated in Figure 1, the industry standard SOT-23 package has two wiring configurations: Figures 3 (SOT-23) and 5 (SOD-882). Tape and reel dimensions are provided in Figures 4 (SOT-23) and 6 (SOD-882). Package and Handling Information Instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. Otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. The SMP1330 series is rated to Moisture Sensitivity Level 1 (MSL1) at 260 C. These diodes can be used for lead or lead-free soldering. For additional information, refer to the Skyworks Application Note, Solder Reflow Information, document number 200164. Figure 1. SMP1330 Series SOT-23 Configurations Electrical and Mechanical Specifications The part numbers and configurations for the SMP1330 series are provided in Table 2. Electrical specifications are provided in Table 3. Typical 1 GHz limiter performance measurements are provided in Table 4. Care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. Production quantities of this product are shipped in a standard tape and reel format. Input power versus output power performance for the SMP1330 series is illustrated in Figure 2. Package dimensions are shown in Table 2. Part Number and Configuration Series Pair Low Inductance Single SOT-23 SOT-23 SOD-882 SMP1330-005LF GreenTM Marking: RQ2 SMP1330-007LF GreenTM Marking: RQB SMP1330-040LF GreenTM Marking: F LS = 1.5 nH LS = 0.4 nH LS = 0.45 nH SMP1330-005 Marking: PQ2 The Pb-free symbol or "LF" in the part number denotes a lead-free, RoHS-compliant package unless otherwise noted as GreenTM. Tin/lead (Sn/Pb) packaging is not recommended for new designs. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 2 November 5, 2013 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * 200050I DATA SHEET * SMP1330 SERIES DIODES Table 3. SMP1330 Series Electrical Specifications (TA = +25 C Unless Otherwise Noted) Parameter Symbol Test Condition Min Series resistance RS F = 100 MHz, IF = 10 mA Capacitance CT 0V Typical Max Units 1.2 1.5 0.7 0.7 1.0 pF pF 1.22 - F = 1 MHz F = 1 GHz Capacitance ratio CTR CT @ 0 V/CT @ 6 V Conductance G 0 V, F = 1 GHz 50 s Carrier lifetime TI IF = 10 mA 4 ns VB IR = 10 A I region width m 2 Breakdown voltage 20 35 50 V Note 1: Performance is guaranteed only under the conditions listed in this Table. Table 4. Typical 1 GHz Limiter Performance Parameter SMP1330-005 Condition Connection Parallel Insertion loss 0.3 dB Input power = -20 dBm IP3 +30 dBm Input power = < 0 dBm 1 dB compression +10 dBm Attenuation @ +20 dBm 8.8 dB Attenuation @ +30 dBm 14 dB Output Power (dBm) +25 +20 +15 007 +10 005 +5 0 0 +10 +14 +18 +22 +26 +30 Input Power (dBm) Figure 2. Typical 1 GHz Limiter Performance Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 200050I * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * November 5, 2013 3 DATA SHEET * SMP1330 SERIES DIODES 0.110 (2.80 mm) Min. 0.120 (3.04 mm) Max. 0.012 (0.30 mm) Min. 0.020 (0.50 mm) Max. 3 0.083 (2.10 mm) Min. 0.104 (2.64 mm) Max. 0.047 (1.20 mm) Min. 0.055 (1.40 mm) Max. 2 1 0.037 (0.95 mm) Ref. 0.020 (0.51 mm) Ref. 0.076 (1.92 mm) Ref. 0.035 (0.89 mm) Min. 0.044 (1.12 mm) Max. 0.003 (0.080 mm) Min. 0.008 (0.20 mm) Max. 8 Max. 0.0005 (0.01 mm) Min. 0.004 (0.10 mm) Max. 0.022 (0.55 mm) Ref. S1389 Figure 3. SOT-23 Package Dimension Drawing 4.00 O1.00 Min. O1.5 + 0.1/-0 4.00 (See Note 5) 1.75 0.10 3.50 0.05 A 2.70 (Bo) R 0.3 Max 2.2 1.20 (Ko) 0.8 0.05 1.0 R 0.5 Typ. Pin 1 Indicator 8.00 + 0.3/-0.1 2.00 0.05 0.25 0.05 A 3.10 (Ao) A Notes: 1. Carrier tape: black conductive polycarbonate. 2. Cover tape material: transparent conductive PSA. 3. Cover tape size: 5.40 mm width. 4. Tolerance 0.10 mm. 5. Ten sprocket hole pitch cumulative tolerance: 0.2 mm. 6. All measurements are in millimeters. Figure 4. SOT-23 Tape and Reel Dimensions Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 4 November 5, 2013 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * 200050I S1684b DATA SHEET * SMP1330 SERIES DIODES 0.650 1.000 0.325 0.600 2X 0.50 0.05 2X 0.25 0.05 Cathode Indicator Bottom View Top View 0.05/0.00 0.46 +0.04/-0.06 Cathode Terminal Side View All dimensions in millimeters S1892 Figure 5. SOD-882 Package Dimension Drawing 4.00 0.10 Cathode Indicator 2.00 0.05 1.55 0.05 (D0) 0.20 8.00 0.1 1.75 0.10 3.50 0.05 1.15 0.05 (Bo) A 0.40 0.05 (D1) 0.47 0.05 (Ko) 2.00 0.05 B B A A 0.70 0.05 (A0) Notes: 1. Carrier tape: black conductive polycarbonate. 2. Cover tape: transparent conductive material. 3. Cover tape size: 5.4 mm width. 4. ESD surface resistivity is 1 x 104 ~ 1 x 108 Ohms/square. 5. All dimensions are in millimeters. B S1922 Figure 6. SOD-882 Tape and Reel Dimensions Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 200050I * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * November 5, 2013 5 DATA SHEET * SMP1330 SERIES DIODES Copyright (c) 2009-2010, 2012-2013 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. ("Skyworks") products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and "Breakthrough Simplicity" are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 6 November 5, 2013 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * 200050I