RL101
THRU
RL107
1 Amp Rectifier
50 - 1000 Volts
A-405
Features
• Low Current Leakage
• Metalurgically Bonded Construction
• Low Cost
DIMENSIONS
INCHES MM
DIM MIN MAX MIN MAX NOTE
A .166 .205 4.10 5.20
B .080 .107 2.00 2.70
C --- .024 --- .60
D 1.000 --- 25.40 ---
Maximum Ratings
• Operating Temperature: -55°C to +150°C
• Storage Temperature: -55°C to +150°C
• Maximum Thermal Resistance; 50 °C/W Junction To Lead
MCC
Catalog
Number
Device
Marking
Maximum
Recurrent
Peak
Reverse
Voltage
Maximum
RMS
Voltage
Maximum
DC
Blocking
Voltage
RL101RL101 50V35V50V
RL102 RL102 100V70V100V
RL103 RL103 200V140V200V
RL104 RL104 400V280V400V
RL105 RL105 600V420V600V
RL106 RL106 800V560V800V
RL107 RL107 1000V700V1000V
Electrical Characteristics @ 25°C Unless Otherwise Specified
Average Forward
Current
IF(AV) 1.0A TA = 75°C
Peak Forward Surge
Current
IFSM 30A 8.3ms, half sine
Maximum
Instantaneous
Forward Voltage
VF1.1V IFM = 1.0A;
TJ = 25°C*
Maximum DC
Reverse Current At
Rated DC Blocking
Voltage
IR5.0µA
50µA
TJ = 25°C
TJ = 125°C
Typical Junction
Capacitance
CJ15pF Measured at
1.0MHz, VR=4.0V
*Pulse test: Pulse width 300 µsec, Duty cycle 2%
A
B
C
D
D
Cathode
Mark
omponents
20736 Marilla Street Chatsworth

 !"#
$%  !"#
MCC
Revision: C 2013/07/02
TM
Micro Commercial Components
www.mccsemi.com
1 of 5
• Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates
Compliant. See ordering information)
Note: 1. High Temperature Solder Exemptions Applied, see EU Directive Annex 7.
• Epoxy meets UL 94 V-0 flammability rating
• Moisture Sensitivity Level 1
• Halogen free available upon request by adding suffix "-HF"
RL101 thru RL107
Average Forward Rectified Current - Amperes versus
Ambient Temperature - °C
Figure 2
Forward Derating Curve
017550 75 100 125
0
.2
.4
.6
Single Phase, Half Wave
60Hz Resistive or Inductive Load
Amps
°C
150
.8
1.0
1.2
Junction Capacitance - pF versus
Reverse Voltage - Volts
Instantaneous Forward Current - Amperes versus
Instantaneous Forward Voltage - Volts
Figure 1
Typical Forward Characteristics
4
6
20
10
Amps
.4 .6 .8 1.0 1.2 1.4
.01
.02
.04
.06
.1
.2
.4
.6
1
2
25°C
Volts
Figure 3
Junction Capacitance
.1 .2 1.4 2 10 20 404 100 200
1
2
6
10
20
100
pF
Volts
60
40
4
400 1000
TJ=25°C
MCC
Revision: C 2013/07/02
TM
Micro Commercial Components
www.mccsemi.com
2 of 5
RL101 thru RL107
1 100
4
0
10
20
30
8
Figure 5
Peak Forward Surge Current
Peak Forward Surge Current - Amperes versus
Number Of Cycles At 60Hz - Cycles
Amps
Cycles
2
6
10 20 60 80
40
40
50
60
Figure 4
Typical Reverse Characteristics
Instantaneous Reverse Leakage Current - MicroAmperes versus
Percent Of Rated Peak Reverse Voltage - Volts
Volts
4
6
20
10
µAmps
20 120
40 60 80 100
.01
.02
.04
.06
.1
.2
.4
.6
1
2
TA=25°C
40
60
100
140
TA=100°C
MCC
Revision: C 2013/07/02
TM
Micro Commercial Components
www.mccsemi.com
3 of 5
Revision: C 2013/07/02
RADIAL TAPING SPECIFICATIONS
FOR RECTIFIERS
A-405 Outline Only
PACKING METHODS
P/N EXAMPLE: A=N:PANASERT
A B C
B = 0: NON INSULATION COATING---
LEAD FIRST OUT.
1: INSULATION COATING---
LEAD FIRST OUT.
2: NON INSULATION COATING---
BODY FIRST OUT.
3: INSULATION COATING---
BODY FIRST OUT.
C = 1: FOR CATHODE DOWN,
IN BULK.
2: FOR CATHODE UP,
IN BULK.
3: FOR CATHODE DOWN,
IN REEL.
4: FOR CATHODE UP,
IN REEL
DIMENSIONS
INCHES MM
DIM MIN MAX MIN MAX NOTE
A .709 .748 18.0 20.0
B .460 .540 11.7 13.7
C --- .106 --- 2.7
D --- .205 --- 5.2
E .610 .650 15.5 16.5
F --- .354 --- 9.0
G --- .177 --- 4.5
H .177 .217 4.5 5.5
J .124 .179 3.15 4.55
K .146 .169 3.7 4.3
M .677 .748 17.2 19.0
N .343 .384 8.70 9.75
P .021 .025 .54 .64
S ---
±.079 --- ±2.0
T .016 .031 . 4 .8
CB
DF
G
H
AE
N
M
K
J
P
S
T
www.mccsemi.com
4 of 5
MCC TM
Micro Commercial Components
MCC
Revision: C 2013/07/02
TM
Micro Commercial Components
www.mccsemi.com
5 of 5
Device Packing
Part Number-TP Tape&Reel: 5Kpcs/Reel
Ordering Information :
***IMPORTANT NOTICE***
Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to
make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components
Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it
convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all
risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are
represented on our website, harmless against all damages.
***LIFE SUPPORT***
MCC's products are not authorized for use as critical components in life support devices or systems without the express written
approval of Micro Commercial Components Corporation.
***CUSTOMER AWARENESS***
Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking
strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages
customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on
our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine
parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty
coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global
problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized
distributors.
Note : Adding "-HF" suffix for halogen free, eg. Part Number-TP-HF
RL104-A-B-C-AP(See page 4 for A/B/C suffix details) Ammo Packing: 2Kpcs/Ammo Box