APFA2507LQBDSEEZGKC 2.5 x 0.7 mm Right Angle SMD Chip LED Lamp DESCRIPTIONS PACKAGE DIMENSIONS tia l The Blue source color devices are made with InGaN Light Emitting Diode The Hyper Red source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode The Green source color devices are made with InGaN on Sapphire Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded APPLICATIONS on fid 2.5 x 1.0 x 0.7 mm right angle SMD LED, 0.7 mm thickness Low power consumption Wide viewing angle Ideal for backlight and indicator Package: 3000 pcs / reel Moisture sensitivity level: 3 Tinned pads for improved solderability RoHS compliant en FEATURES RECOMMENDED SOLDERING PATTERN (units : mm; tolerance : 0.1) ATTENTION C Backlight Status indicator Home and smart appliances Wearable and portable devices Healthcare applications Observe precautions for handling electrostatic discharge sensitive devices Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.15(0.006") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE Part Number Emitting Color (Material) Iv (mcd) @ 2mA [2] Blue (InGaN) APFA2507LQBDSEEZGKC Hyper Red (AlGaInP) Viewing Angle [1] Lens Type Water Clear Green (InGaN) Min. Typ. 4 10 6 10 20 60 21/2 130 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. (c) 2019 Kingbright. All Rights Reserved. Spec No: DSAO5250 / 1203015217 Rev No: V.3B Date: 03/06/2019 Page 1 / 4 APFA2507LQBDSEEZGKC ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25C Parameter Symbol Emitting Color peak Value Unit Max. Blue Hyper Red Green 460 630 515 - nm dom [1] Blue Hyper Red Green 465 621 525 - nm Spectral Bandwidth at 50% REL MAX IF = 2mA Blue Hyper Red Green 25 20 35 - nm Capacitance C Blue Hyper Red Green 100 25 45 - pF Forward Voltage IF = 2mA VF [2] Blue Hyper Red Green 2.65 1.8 2.65 3.1 2.1 3.1 V Reverse Current (VR = 5V) IR Blue Hyper Red Green - 50 10 50 A Blue Hyper Red Green 0.04 0.13 0.05 - nm/C Wavelength at Peak Emission IF = 2mA Dominant Wavelength IF = 2mA tia l Typ. TCpeak Temperature Coefficient of dom IF = 2mA, -10C T 85C TCdom Blue Hyper Red Green 0.03 0.06 0.03 - nm/C Temperature Coefficient of VF IF = 2mA, -10C T 85C TCV Blue Hyper Red Green -3.0 -1.9 -3.0 - mV/C on fid en Temperature Coefficient of peak IF = 2mA, -10C T 85C Notes: 1. The dominant wavelength (d) above is the setup value of the sorting machine. (Tolerance d: 1nm. ) 2. Forward voltage: 0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at TA=25C C Parameter Symbol Value Blue Hyper Red Green Unit Power Dissipation PD 120 75 102.5 mW Reverse Voltage VR 5 5 5 V Junction Temperature Tj 115 115 115 C Operating Temperature Top -40 to +85 C Storage Temperature Tstg -40 to +85 C DC Forward Current IF Peak Forward Current IFM [1] 30 30 25 mA 150 195 150 mA 250 3000 450 V Electrostatic Discharge Threshold (HBM) - Thermal Resistance (Junction / Ambient) Rth JA [2] 440 505 590 C/W [2] 320 400 480 C/W Thermal Resistance (Junction / Solder point) Rth JS Notes: 1. 1/10 Duty Cycle , 0.1ms Pulse Width . 2. Rt h JA, Rt h JS Results from mounting on PC board FR4 (pad size16 mm 2 per pad). 3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity - Ref JEDEC/JESD625-A and JEDEC/J-STD-033. (c) 2019 Kingbright. All Rights Reserved. Spec No: DSAO5250 / 1203015217 Rev No: V.3B Date: 03/06/2019 Page 2 / 4 APFA2507LQBDSEEZGKC TECHNICAL DATA SPATIAL DISTRIBUTION RELATIVE INTENSITY vs. WAVELENGTH Blue Green Red Relative Intensity (a. u.) 100% Ta = 25 C Ta = 25 C 80% 0 -15 15 45 -45 60% 60 -60 40% 20% 75 -75 0% 350 400 450 500 550 600 Wavelength (nm) 650 700 750 800 -90 1.0 R G B 30 -30 0.5 0.0 90 1.0 0.5 6 4 2 2.2 2.4 2.6 2.8 3.0 Forward voltage (V) Ta = 25 C 4.0 3.0 2.0 1.0 0.0 3.2 0 2 4 6 8 Forward current (mA) 10 Luminous Intensity vs. Ambient Temperature 50 2.5 40 30 20 10 0 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 100 Ambient temperature (C) on fid 0 2.0 5.0 en Ta = 25 C Permissible forward current (mA) Luminous intensity normalised at 2 mA Forward current (mA) 10 8 Forward Current Derating Curve Luminous Intensity vs. Forward Current Luminous intensity normalised at T a = 25 C Forward Current vs. Forward Voltage tia l BLUE -40 -20 0 20 40 60 80 100 Ambient temperature (C) HYPER RED 6 4 2 0 1.6 1.7 1.8 1.9 2.0 Forward voltage (V) Ta = 25 C 8.0 6.0 4.0 2.0 0.0 2.1 0 2 4 6 8 Forward current (mA) 10 Forward Current Derating Curve 50 Luminous Intensity vs. Ambient Temperature Luminous intensity normalised at Ta = 25 C 8 10.0 C Forward current (mA) Ta = 25 C Permissible forward current (mA) 10 Luminous Intensity vs. Forward Current Luminous intensity normalised at 2 mA Forward Current vs. Forward Voltage 40 30 20 10 0 2.5 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 100 Ambient temperature (C) -40 -20 0 20 40 60 80 100 Ambient temperature (C) GREEN Forward current (mA) Ta = 25 C 8 6 4 2 2.5 2.7 2.9 3.1 Forward voltage (V) 3.3 10.0 Permissible forward current (mA) Luminous intensity normalised at 2 mA 10 0 2.3 Forward Current Derating Curve Luminous Intensity vs. Forward Current Ta = 25 C 8.0 6.0 4.0 2.0 0.0 0 2 4 6 8 Forward current (mA) 10 (c) 2019 Kingbright. All Rights Reserved. Spec No: DSAO5250 / 1203015217 Rev No: V.3B Date: 03/06/2019 50 Luminous Intensity vs. Ambient Temperature Luminous intensity normalised at Ta = 25 C Forward Current vs. Forward Voltage 40 30 20 10 0 -40 -20 0 20 40 60 80 100 Ambient temperature (C) 2.5 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 100 Ambient temperature (C) Page 3 / 4 APFA2507LQBDSEEZGKC REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS TAPE SPECIFICATIONS (units : mm) C on fid PACKING & LABEL SPECIFICATIONS en Notes: 1. Don't cause stress to the LEDs while it is exposed to high temperature. 2. The maximum number of reflow soldering passes is 2 times. 3. Reflow soldering is recommended. Other soldering methods are not recommended as they might cause damage to the product. tia l REEL DIMENSION (units : mm) PRECAUTIONARY NOTES 1. The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at https://www.KingbrightUSA.com/ApplicationNotes (c) 2019 Kingbright. All Rights Reserved. Spec No: DSAO5250 / 1203015217 Rev No: V.3B Date: 03/06/2019 Page 4 / 4