TDA Series Ultra-miniature Surface Mount Half-pitch DIP Switches Features/Benefits * Bifurcated contact for increased ! NEW Typical Applications * Hand-held electronic devices * Portable computer and electrical reliability * Process sealed for surface H electronic devices * Instrumentation and controls DIP mount soldering and washable processing * RoHS compliant Specifications PACKAGING: Switches supplied in rigid dispensing tubes in full tube quantities only, this may affect order quantity. Numbers of switches per tube varies with model. Tape and reel packaging quantity varies with model. SWITCH FUNCTION: SPST - 1, 2, 4, 6, 8 & 10 positions. CONTACT RATING: 24 V DC, 25 mA (switching). Materials 50 V DC, 100 mA (steady state). CASE & COVER: PPS (UL94V-0) MECHANICAL AND ELECTRICAL LIFE: 1,000 cycles. ACTUATOR: LCP (UL94V-0). CONTACT RESISTANCE: 100 m max. CONTACTS: Copper alloy, with gold plate over nickel plate. INSULATION RESISTANCE: 100 M @ 100 V DC min. TERMINALS: Copper alloy, with gold flash over nickel plate. DIELECTRIC STRENGTH: 300 V AC min. All terminals are insert molded. STORAGE TEMPERATURE: -40C to 85C. TAPE SEAL: Polyimide. OPERATING TEMPERATURE: -40C to 85C. Note: Specifications and materials listed above are for switches with standard options. OPERATING FORCE: 4,9N max. For information on specific and custom switches, consult Customer Service Center. SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging). Note: All switches supplied in "OFF" position. How To Order Complete part numbers for TDA Series are shown below. T D A Number of Positions NEW TDA01* TDA02 TDA04 TDA06 TDA08 TDA10 B H 0 1 Flush Actuator H0 Terminations S J* Contact material B Gold Sealed 1 Packaging NONE Tubes R T/R * TDA01H0JB1R is not available, TDA01 only offered in tape & reel Dimensions are shown: mm Specifications and dimensions subject to change H-6 www.ck-components.com TDA Series Ultra-miniature Surface Mount Half-pitch DIP Switches DIM 'A' 1,27 1,2 0,76 1,27 0,8 CHAMFER ON C&K TDA08 6,35 8,89 7,62 H 0,45 TDA08H0SB1 0,4 TYP. 1,27 6,2 2,2 TAPE SEAL DIP 1 2 3 4 5 6 7 8 2,3 0,57 0,15 6,0 1,06 DIM 'A' SEE CHART 8,12 DATE CODE 0,76 TYP 1,27 TYP PART NUMBER 1,2 5,37 3,77 6,97 2X 0,8 CHAMFER 0,1 DIM 'B' SEE CHART TAPE SEAL 0 ~5 6,2 0,15 TYP 2,2 2,35 TDA10H0JB1 1,27 TYP 0,45 TYP 1 TYP SEE DETAIL 6,35 TYP Tube Package ROHS PART NUMBER MARKING LABEL ON END OF TUBE REF 2,10 REF 4,40 500,0 TDA01H0SB1R* TDA02H0_B1 TDA04H0_B1 TDA06H0_B1 TDA08H0_B1 TDA10H0_B1 REF 11,20 REF 3,40 DIM. `A' QUANTITY PER TUBE 1 2,4 N/A 2 3,67 125 4 6,21 70 6 8,75 50 8 11,29 40 10 13,83 30 Schematic REF 2,0 MARKING LABEL SPST ON C&K TDA06 EMBOSSED CARRIER 1 2 3 4 5 6 REEL DIAMETER 330mm NO. POS. Tape & Reel Package DIM 'W' SEE CHART ROHS PART NUMBER TDA01H0SB1R* TDA02H0_B1R TDA04H0_B1R TDA06H0_B1R TDA08H0_B1R TDA10H0_B1R 12,0 DIRECTION OF FEED DIRECTION OF FEED 3,0 NO. POS. DIM. `W' QUANTITY PER REEL 1 16,0 2500 2 16,0 2000 4 16,0 2000 6 16,0 2000 8 24,0 2000 10 24,0 2000 * see next page for TDA01 drawing Dimensions are shown: mm Specifications and dimensions subject to change H-7 www.ck-components.com TDA Series Ultra-miniature Surface Mount Half-pitch DIP Switches ! NEW DIP H 1.75 0.10 4.00 0.10 8.00 0.10 1.5 +0.10 -0.00 TDA01H0SB1R 0.40 0.05 7.50 0.10 16.0 0.30 6.55 8.60 +0.2 0.4 O SEE DTEAIL A 1 0.1 R0.3 MAX 2.0 0.2 TYP 2.65 2.90 14.0 6.55 0.1 8.60 0.1 SEE DETAIL "B' 2 0.5 2.9 0.1 21 0.8 13 0.5 330 DETAIL "B" Dimensions are shown: Inch (mm) Specifications and dimensions subject to change H-8 www.ck-components.com