DIP
H
H–6
Dimensions are shown: mm
Specifications and dimensions subject to change
www.ck-components.com
TDA Series
Ultra-miniature Surface Mount Half-pitch DIP Switches
How To Order
Complete part numbers for TDA Series are shown below.
Specifications
SWITCH FUNCTION: SPST – 1, 2, 4, 6, 8 & 10 positions.
CONTACT RATING:
24 V DC, 25 mA (switching).
50 V DC, 100 mA (steady state).
MECHANICAL AND ELECTRICAL LIFE: 1,000 cycles.
CONTACT RESISTANCE: 100 mΩmax.
INSULATION RESISTANCE: 100 MΩ@ 100 V DC min.
DIELECTRIC STRENGTH: 300 V AC min.
STORAGE TEMPERATURE: -40°C to 85°C.
OPERATING TEMPERATURE: -40°C to 85°C.
OPERATING FORCE: 4,9N max.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
Features/Benefits
•
Bifurcated contact for increased
electrical reliability
•
Process sealed for surface
mount soldering and washable
processing
•
RoHS compliant
PACKAGING: Switches supplied in rigid dispensing tubes in full
tube quantities only, this may affect order quantity. Numbers of
switches per tube varies with model. Tape and reel packaging
quantity varies with model.
Materials
CASE & COVER: PPS (UL94V-0)
ACTUATOR: LCP (UL94V-0).
CONTACTS: Copper alloy, with gold plate over nickel plate.
TERMINALS: Copper alloy, with gold flash over nickel plate.
All terminals are insert molded.
TAPE SEAL: Polyimide.
Note: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Note: All switches supplied in “OFF” position.
Typical Applications
•
Hand-held electronic devices
•
Portable computer and
electronic devices
•
Instrumentation and controls
Number of
Positions
TDA01*
TDA02
TDA04
TDA06
TDA08
TDA10
Flush Actuator
H0
Terminations
S
J*
Packaging
NONE Tubes
R T/R
TDAB
Contact material
B Gold
H01
Sealed
1
* TDA01H0JB1R is not available, TDA01 only offered in tape & reel
NEW
NEW!
ROHS NO. QUANTITY
PART NUMBER POS. DIM.
‘
A’PER TUBE
TDA01H0SB1R*
12,4 N/A
TDA02H0_B1
2 3,67 125
TDA04H0_B1
46,21 70
TDA06H0_B1
6 8,75 50
TDA08H0_B1
811,29 40
TDA10H0_B1
10 13,83 30
Schematic
SPST
DIP
H
H–7
Dimensions are shown: mm
Specifications and dimensions subject to change
www.ck-components.com
TDA Series
Ultra-miniature Surface Mount Half-pitch DIP Switches
TAPE SEAL
0,4 2,2
2,3 0,57
1,06 8,12
0,15
6,2
6,0
78654321
ON TDA08C&K
0,8
CHAMFER
1,2 1,27
DIM 'A'
0,45
0,76
1,27
7,62 6,35 8,89
TYP.
1,27
Tape & Reel Package
TDA08H0SB1
ROHS NO. QUANTITY
PART NUMBER POS. DIM.
‘
W’ PER REEL
TDA01H0SB1R*
1 16,0 2500
TDA02H0_B1R
216,0 2000
TDA04H0_B1R
416,0 2000
TDA06H0_B1R
6 16,0 2000
TDA08H0_B1R
8 24,0 2000
TDA10H0_B1R
10 24,0 2000
3,0
MARKING LABEL
EMBOSSED
CARRIER
DIRECTION OF FEED
REF
2,0
DIM 'W'
SEE CHART
12,0
REEL
DIAMETER
330mm
1 2 3 4 5 6
ON C&K TDA06
DIRECTION OF FEED
Tube Package
500,0
REF
4,40
REF
2,10
MARKING LABEL
ON END OF TUBE
REF
11,20
REF
3,40
0~5
0,1
DIM ’A’
SEE CHART
1,27 TYP
6,35
TYP
6,973,77
1,27 TYP 0,76 TYP
6,2
2,35
DIM 'B'
SEE CHART
1,2
0,45 TYP
2,2
5,37
1 TYP
0,15 TYP
2X 0,8
CHAMFER
DATE CODE
PART NUMBER
TAPE SEAL
SEE DETAIL
TDA10H0JB1
* see next page for TDA01 drawing
4.00 0.10 8.00 0.10
1.5
8.60
6.55
0.40 0.05
16.0 0.30
7.50 0.10
1.75 0.10
0.4
2.0 0.2
TYP
14.0
330
8.60 0.1
6.55 0.1
1 0.1
2.9 0.1
R0.3
MAX
2.90
2.65
2 0.5
13 0.5 21 0.8
+0.10
-0.00
+0.2
O
SEE DTEAIL A
SEE DETAIL "B'
DETAIL "B"
DIP
H
H–8
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
TDA Series
Ultra-miniature Surface Mount Half-pitch DIP Switches
TDA01H0SB1R
NEW!
