MAX306/MAX307 Precision, 16-Channel/Dual 8-Channel, High-Performance, CMOS Analog Multiplexers General Description The MAX306/MAX307 precision, monolithic, CMOS analog multiplexers (muxes) offer low on-resistance (less than 100), which is matched to within 5 between channels and remains flat over the specified analog signal range (7, max). They also offer low leakage over temperature (INO(OFF) less than 2.5nA at +85C) and fast switching speeds (tTRANS less than 250ns). The MAX306 is a single-ended 1-of-16 device, and the MAX307 is a differential 2-of-8 device. The MAX306/MAX307 are fabricated with Maxim's improved 44V silicon-gate process. Design improvements yield extremely low charge injection (less than 10pC) and guarantee electrostatic discharge (ESD) protection greater than 2000V. These muxes operate with a single +5V to +30V supply, or bipolar 4.5V to 20V supplies, while retaining TTL/ CMOS-logic input compatibility and fast switching. CMOS inputs provide reduced input loading. These improved parts are plug-in upgrades for the industrystandard DG406, DG407, DG506A, and DG507A. Applications Sample-and-Hold Circuits Test Equipment Heads-Up Displays Guidance and Control Systems Military Radios Communications Systems Battery-Operated Systems PBX, PABX Audio Signal Routing Benefits and Features Guaranteed On-Resistance Match Between Channels, < 5 Max Low On-Resistance, < 100 Max Guaranteed Flat On-Resistance Over Specified Signal Range, 7 Max Guaranteed Charge Injection, < 10pC INO(OFF) Leakage < 2.5nA at +85C ICOM(OFF) Leakage < 20nA at +85C ESD Protection > 2000V Plug-In Upgrade for Industry-Standard DG406/DG407/DG506A/DG507A Single-Supply Operation (+5V to +30V) Bipolar-Supply Operation (4.5V to 20V) Low Power Consumption, < 1.25mW Rail-to-Rail Signal Handling TTL/CMOS-Logic Compatible Ordering Information PART TEMP RANGE 0C to +70C 28 PDIP MAX306CWI 0C to +70C 28 Wide SO MAX306C/D 0C to +70C Dice* MAX306EPI -40C to +85C 28 PDIP MAX306EWI -40C to +85C 28 Wide SO MAX306EQI -40C to +85C 28 PLCC MAX306EUI -40C to +85C 28 TSSOP MAX306MJI -55C to +125C 28 CERDIP Ordering Information continued at end of data sheet. *Contact factory for dice specifications. Pin Configurations/Functional Diagrams/Truth Tables TOP VIEW 28 COM A3 A2 A1 A0 EN N.C. 2 27 V- N.C. 3 26 NO8 NO16 4 25 NO7 X 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 X 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 X 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 X 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 V+ 1 NO15 5 NO14 6 24 NO6 MAX306 23 NO5 NO13 7 22 NO4 NO12 8 21 NO3 NO11 9 20 NO2 NO10 10 19 NO1 NO9 11 18 EN GND 12 17 A0 N.C. 13 16 A1 A3 14 15 A2 PDIP/SO/TSSOP 19-0270; Rev 5; 3/16 PIN-PACKAGE MAX306CPI None 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 MAX306 LOGIC "0" VAL 0.8V, LOGIC "1" = VAH 2.4V Pin Configurations/Functional Diagrams/Truth Tables continued at end of data sheet. MAX306/MAX307 Precision, 16-Channel/Dual 8-Channel, High-Performance, CMOS Analog Multiplexers Absolute Maximum Ratings (Voltage Referenced to V-) V+.......................................................................... -0.3V, +44V GND....................................................................... -0.3V, +25V Digital Inputs, NO, COM (Note 1)......... (V- - 2V) to (V+ + 2V) or 30mA (whichever occurs first) Continuous Current (any terminal)......................................30mA Peak Current, NO or COM (pulsed at 1ms, 10% duty cycle max)...........................100mA Continuous Power Dissipation (TA = +70C) Plastic DIP (derate 9.09mW/C above +70C).............727mW Wide SO (derate 12.50mW/C above +70C)............1000mW PLCC (derate 10.53mW/C above +70C)...................842mW CERDIP (derate 16.67mW/C above +70C).............1333mW TSSOP (derate 12.8mW/C above +70C)................1025mW Operating Temperature Ranges MAX30_C_ _.......................................................0C to +70C MAX30_E_ _................................................... -40C to +85C MAX30_MJI................................................... -55C to +125C Storage Temperature Range............................. -65C to +150C Lead Temperature (soldering, 10s).................................. +300C Soldering Temperature (reflow) PDIP, Wide SO, TSSOP lead(Pb)-free......................... +260C PDIP, Wide SO, TSSOP containing lead(Pb)............... +240C PLCC lead(Pb)-free......................................................+245C PLCC containing lead(Pb)............................................+225C CERDIP........................................................................+240C Note 1: Signals on NO, COM, A0, A1, A2, A3, or EN exceeding V+ or V- are clamped by internal diodes. Limit forward current to maximum current ratings. Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Electrical Characteristics--Dual Supplies (V+ = +15V, V- = -15V, GND = 0V, VAH = +2.4V, VAL = +0.8V, TA = TMIN to TMAX, unless otherwise noted.) PARAMETER SYMBOL CONDITIONS MIN TYP (Note 2) MAX UNITS +15 V SWITCH Analog Signal Range On-Resistance VNO, VCOM RON (Note 3) -15 INO = -1.0mA, VCOM = 10V TA = +25C TA = TMIN to TMAX On-Resistance Matching Between Channels RON INO = -1.0mA, VCOM = 10V (Note 4) TA = +25C On-Resistance Flatness RFLAT INO = -1.0mA, VCOM = 5V or 0V TA = +25C VCOM = +10V, VNO = 10V, VEN = 0V TA = +25C VNO = 10V, VCOM = +10V, VEN = 0V TA = +25C NO Off-Leakage Current (Note 5) COM Off-Leakage Current (Note 5) www.maximintegrated.com INO(OFF) ICOM(OFF) VNO = +10V, VCOM = 10V, VEN = 0V 60 125 1.5 TA = TMIN to TMAX 1.8 MAX306 TA = TMIN to TMAX M TA = TMIN to TMAX +0.01 -2.5 nA +5.0 +0.02 +0.75 C, E -20 +20 M -40 +40 -0.75 +0.5 +2.5 -5.0 -0.75 TA = +25C MAX307 7 10 -0.5 C, E 5 8 TA = TMIN to TMAX TA = TMIN to TMAX 100 +0.02 +0.75 C, E -10 +10 M -20 +20 nA Maxim Integrated 2 MAX306/MAX307 Precision, 16-Channel/Dual 8-Channel, High-Performance, CMOS Analog Multiplexers Electrical Characteristics--Dual Supplies (continued) (V+ = +15V, V- = -15V, GND = 0V, VAH = +2.4V, VAL = +0.8V, TA = TMIN to TMAX, unless otherwise noted.) PARAMETER SYMBOL CONDITIONS TA = +25C COM On-Leakage Current (Note 5) ICOM(ON) VCOM = 10V, VNO = 10V, Sequence each switch on MAX306 TA = TMIN to TMAX TA = TMIN to TMAX TYP (Note 2) MAX -0.75 +0.02 +0.75 C, E -25 +25 M -50 +50 TA = +25C MAX307 MIN -0.75 C, E M +0.02 +0.75 -12.5 +12.5 -25 +25 UNITS nA INPUT Input Current with Input Voltage High Input Current with Input Voltage Low IAH VA = 2.4V or 15V -1.0 +1.0 A IAL VEN = 0V or 2.4V, VA = 0V -1.0 +1.0 A 4.5 20 V SUPPLY Power-Supply Range Positive Supply Current Negative Supply Current I+ I- VEN = VA = 0V or 5.0V TA = +25C 16 TA = TMIN to TMAX VEN = 2.4V, VA(ALL) = 0V TA = +25C VEN = 2.4V, VA(ALL) = 0V TA = +25C TA = TMIN to TMAX TA = TMIN to TMAX 30 75 0.075 0.5 1 -1 +1 -10 +10 A mA A DYNAMIC Transition Time (Note 3) tTRANS Figure 2 Break-Before-Make Interval tOPEN Figure 4 Enable Turn-On Time (Note 3) tON(EN) Figure 3 Enable Turn-Off Time (Note 3) tOFF(EN) Figure 3 TA = +25C 110 TA = TMIN to TMAX TA = +25C TA = +25C 400 10 40 130 TA = TMIN to TMAX TA = +25C 300 ns 200 400 55 TA = TMIN to TMAX ns 150 300 ns ns CL = 1.0nF, VNO = 0V, RS = 0, Figure 5 TA = +25C 2 VISO VEN = 0V, RL = 1k, fSW = 100kHz, Figure 6 TA = +25C -69 dB Crosstalk Between Channels VCT VEN = 2.4V, fSW = 100kHz, VGEN = 1VP-P, RL = 1k, Figure 7 TA = +25C -92 dB Logic Input Capacitance CIN fSW = 1MHz TA = +25C 8 pF Charge Injection (Note 3) Off-Isolation (Note 6) www.maximintegrated.com Q 10 pC Maxim Integrated 3 MAX306/MAX307 Precision, 16-Channel/Dual 8-Channel, High-Performance, CMOS Analog Multiplexers Electrical Characteristics--Single Supply (V+ = +12V, V- = 0V, GND = 0V, VAH = +2.4V, VAL = +0.8V, TA = TMIN to TMAX, unless otherwise noted.) PARAMETER NO Off-Capacitance COM Off-Capacitance COM On-Capacitance SYMBOL CNO(OFF) CONDITIONS fSW = 1MHz, VEN = VNO = 0V, Figure 8 TA = +25C fSW = 1MHz, MAX306 V = 0.8V, CCOM(OFF) EN VCOM = 0V, MAX307 Figure 8 TA = +25C fSW = 1MHz, MAX306 VEN = 2.4V, VCOM = 0V, MAX307 Figure 8 TA = +25C CCOM(ON) MIN TYP (Note 2) MAX 8 UNITS pF 130 pF 65 140 pF 70 SWITCH Analog Signal Range On-Resistance VNO, VCOM (Note 3) 0 12 V INO = -1.0mA VCOM = 3V or 10V TA = +25C 120 175 tTRANS VNO1 = 8V, VNO8 = 0V, VIN = 2.4V, Figure 2 TA = +25C 130 450 ns tON(EN) VINH = 2.4V, VINL = 0V, VNO1 = 5V, Figure 3 TA = +25C 105 600 ns tOFF(EN) VINH = 2.4V, VINL = 0V, VNO1 = 5V, Figure 3 TA = +25C 80 300 ns Q CL = 1.0nF, VNO = 0V, RS = 0 TA = +25C 2 10 pC RON DYNAMIC Transition Time (Note 3) Enable Turn-On Time (Note 3) Enable Turn-Off Time (Note 3) Charge Injection (Note 3) Note 2: The algebraic convention where the most negative value is a minimum and the most positive value a maximum is used in this data sheet. Note 3: Guaranteed by design. Note 4: RON = RON(MAX) - RON(MIN). On-resistance match between channels and flatness are guaranteed only with specified voltages. Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured at the extremes of the specified analog signal range. Note 5: Leakage parameters are 100% tested at the maximum-rated hot temperature and guaranteed by correlation at +25C. Note 6: Off-isolation = 20log VCOM/VNO, where VCOM = output and VNO = input to off switch. www.maximintegrated.com Maxim Integrated 4 MAX306/MAX307 Precision, 16-Channel/Dual 8-Channel, High-Performance, CMOS Analog Multiplexers Typical Operating Characteristics (TA = +25C, unless otherwise noted.) 10V 100 80 15V 60 60 +25C 40 -55C 160 -5 0 5 10 15 20 -15 -10 -5 +25C 80 -55C 60 1 ICOM (ON) 0.1 0.01 INO (OFF) 0.001 20 5 10 15 0.0001 -55 -35 -15 25 45 65 85 105 125 0 0 VCOM (V) www.maximintegrated.com 5 10 20 ON-LEAKAGE vs. TEMPERATURE 1000 V+ = +15V V- = -15V 100 10 1 0.1 0.01 0.0001 ICOM (ON) -55 -35 -15 5 25 45 100 I+ 10 65 85 105 125 1 0.1 I- 0.01 -20 -5 15 SUPPLY CURRENT vs. TEMPERATURE V+ = 12V V- = 0V -10 -10 10 TEMPERATURE (C) I+, I- (mA) 10 Qj (pC) 5 MAX306/7 TOC-07 V+ = +15V V- = -15V -15 5 0.001 CHARGE INJECTION vs. VCOM 20 -30 0 TEMPERATURE (C) VCOM (V) 30 20V VCOM (V) 10 40 0 15 V+ = +15V V- = -15V 100 OFF-LEAKAGE (nA) +85C 100 10 MAX306/7 TOC-05 +125C 120 5 OFF-LEAKAGE vs. TEMPERATURE 1000 MAX306/7 TOC-04 V+ = +15V V- = 0V 0 40 VCOM (V) ON-RESISTANCE vs. VCOM AND TEMPERATURE (SINGLE SUPPLY) 140 15V 80 VCOM (V) 160 10V MAX306/7 TOC-06 -10 200 15 MAX306/7 TOC-08 -15 0 5V 240 120 ON-LEAKAGE (nA) 0 -20 RON () 320 20 20 0 360 280 +85C 20V 40 400 +125C 80 RON () RON () 120 100 ON-RESISTANCE vs. VCOM (SINGLE SUPPLY) MAX306/7 TOC-03 5V V+ = +15V V- = -15V RON () 140 120 MAX306/7 TOC-01 160 ON-RESISTANCE vs. VCOM AND TEMPERATURE (DUAL SUPPLIES) MAX306/7 TOC-02 ON-RESISTANCE vs. VCOM (DUAL SUPPLIES) 0.001 -55 -35 -15 V+ = +15V V- = -15V VEN = VA = 0V, 4.5V 5 25 45 65 85 105 125 TEMPERATURE (C) Maxim Integrated 5 MAX306/MAX307 Precision, 16-Channel/Dual 8-Channel, High-Performance, CMOS Analog Multiplexers Pin Description MAX306 PIN NAME FUNCTION MAX307 PIN NAME FUNCTION 1 V+ Positive Supply Voltage Input 1 V+ Positive Supply Voltage Input 2, 3, 13 N.C. No Connection. Not internally connected. 2 COMB 4-11 NO16-NO9 3, 13, 14 N.C. 12 GND 4-11 NO8B-NO1B 14-17 A3-A0 Address Inputs 12 GND 18 EN Enable Inputs 15, 16, 17 A2, A1, A0 19-26 NO1-NO8 18 EN 19-26 NO1A-NO8A 27 V- 28 COMA 27 V- 28 COM Analog Inputs-bidirectional Ground Analog Inputs-bidirectional Negative Supply Voltage Input Output-bidirectional Applications Information Operation with Supply Voltages Other than 15V Using supply voltages other than 15V will reduce the analog signal range. The MAX306/MAX307 switches operate with 4.5V to 20V bipolar supplies or with a +5V to +30V single supply; connect V- to GND when operating with a single supply. Also, both device types can operate with unbalanced supplies such as +24V and -5V. The Typical Operating Characteristics graphs show typical onresistance with 20V, 15V, 10V, and 5V supplies. (Switching times increase for 5V operation, up to a maximum of 10s.) www.maximintegrated.com No Connection. Not internally connected. Analog Inputs-bidirectional Ground Address Inputs Enable Input Analog Inputs-bidirectional Negative Supply Voltage Input Output A-bidirectional V+ and 1V below V-, but low switch resistance and low leakage characteristics are unaffected. Device operation is unchanged, and the difference between V+ and Vshould not exceed +44V. V+ MAX306 NO Overvoltage Protection Proper power-supply sequencing is recommended for all CMOS devices. Do not exceed the absolute maximum ratings because stresses beyond the listed ratings may cause permanent damage to the devices. Always sequence V+ on first, then V-, followed by either the logic inputs, NO or COM. If power-supply sequencing is not possible, add two small-signal diodes in series with supply pins for overvoltage protection (Figure 1). Adding diodes reduces the analog signal range to 1V above Output B-bidirectional COM Vg V- Figure 1. Overvoltage Protection Using External Blocking Diodes Maxim Integrated 6 MAX306/MAX307 Precision, 16-Channel/Dual 8-Channel, High-Performance, CMOS Analog Multiplexers Test Circuits/Timing Diagrams +15V V+ A0 A1 +2.4V NO1 10V NO2-NO15 A2 MAX306 A3 NO16 EN +10V COM GND VOUT V- A1 +2.4V EN VNO1 NO1B 10V +10V COMB V- GND 90% 90% VNO16 NO8B MAX307 50% SWITCH OUTPUT VOUT 0V NO1A-NO8A A2 tr < 20ns tf < 20ns 0V -15V V+ A0 +3V 35pF 300 +15V LOGIC INPUT 300 tTRANS tTRANS ON VOUT 35pF -15V Figure 2. Transition Time +15V V+ EN A0 A1 A2 A3 NO1 MAX306 COM GND 50 -5V NO2-NO16 VOUT V- 35pF 1k +15V A2 50 +3V tr < 20ns tf < 20ns 50% 0V tON(EN) tOFF(EN) 0V NO1B 10% SWITCH OUTPUT -5V NO1A-NO8A NO2B-NO8B, COMA A0 A1 -15V V+ EN LOGIC INPUT VOUT 90% MAX307 GND COMB V- VOUT 1k 35pF -15V Figure 3. Enable Switching Time www.maximintegrated.com Maxim Integrated 7 MAX306/MAX307 Precision, 16-Channel/Dual 8-Channel, High-Performance, CMOS Analog Multiplexers Test Circuits/Timing Diagrams (continued) +15V +2.4V V+ EN A0 NO1-NO16 LOGIC +3V INPUT 0V +5V tr < 20ns tf < 20ns 50% A1 A2 MAX306 A3 VOUT COM GND VOUT V300 50 80% SWITCH OUTPUT 35pF tOPEN 0V -15V Figure 4. Break-Before-Make Interval +15V RS NO1-NO16 V+ LOGIC INPUT EN VS CHANNEL SELECT A0 MAX306 COM A1 A2 A3 V- -15V OFF ON OFF 0V VOUT CL = 1000nF GND +3V VOUT VOUT VOUT IS THE MEASURED VOLTAGE DUE TO CHARGE TRANSFER ERROR Q WHEN THE CHANNEL TURNS OFF. Q = CL = VOUT Figure 5. Charge Injection www.maximintegrated.com Maxim Integrated 8 MAX306/MAX307 Precision, 16-Channel/Dual 8-Channel, High-Performance, CMOS Analog Multiplexers Test Circuits/Timing Diagrams (continued) VOUT VIN NO1 RS = 50 V+ NO16 RL = 1k MAX306 A0 COM A1 VOUT RL = 1k A2 A3 GND EN 10nF RS = 50 V+ NO1 NO2 NO16 MAX306 A0 COM A1 A2 A3 GND V- -15V OFF-ISOLATION = 20log 10nF +15V 10nF +15V V- EN 10nF -15V VOUT VIN CROSSTALK = 20log Figure 6. Off-Isolation VOUT VIN Figure 7. Crosstalk +15V V+ A3 CHANNEL SELECT A2 A1 NO1 MAX306 NO16 A0 GND COM V- EN Meter Impedance Analyzer f = 1MHz -15V Figure 8. NO/COM Capacitance www.maximintegrated.com Maxim Integrated 9 MAX306/MAX307 Precision, 16-Channel/Dual 8-Channel, High-Performance, CMOS Analog Multiplexers Pin Configurations/Functional Diagrams/Truth Tables (continued) TOP VIEW V+ 1 28 COMA COMB 2 27 V- N.C. 3 26 NO8A NO8B 4 25 NO7A NO7B 5 24 NO6A MAX307 NO6B 6 23 NO5A NO5B 7 22 NO4A NO4B 8 21 NO3A NO3B 9 20 NO2A NO2B 10 19 NO1A NO1B 11 18 EN GND 12 17 A0 N.C. 13 16 A1 N.C. 14 15 A2 A2 A1 A0 EN X 0 0 0 0 1 1 1 1 X 0 0 1 1 0 0 1 1 X 0 1 0 1 0 1 0 1 0 1 1 1 1 1 1 1 1 None 1 2 3 4 5 6 7 8 MAX307 LOGIC "0" VAL 0.8V, LOGIC "1" = VAH 2.4V 2 1 V+ NO8 V+ 3 V- N.C. 4 COM N.C. TOP VIEW NO16 PDIP/SO 28 27 26 NO15 5 25 NO7 NO14 6 24 NO6 NO13 7 23 NO5 NO12 8 22 NO4 NO11 9 21 N03 NO10 10 20 N02 NO9 11 19 N01 MAX306 PLCC N.C. = NO INTERNAL CONNECTION www.maximintegrated.com A0 EN A1 A2 A3 N.C. GND 12 13 14 15 16 17 18 V- GND NO1 NO2 NO3 NO4 NO5 NO6 NO7 NO8 NO9 NO10 NO11 NO12 NO13 NO14 NO15 NO16 COM CMOS DECODERS/DRIVERS A0 A1 A2 A3 EN MAX306 16-CHANNEL SINGLE-ENDED MULTIPLEXER Maxim Integrated 10 MAX306/MAX307 Precision, 16-Channel/Dual 8-Channel, High-Performance, CMOS Analog Multiplexers 2 1 V+ NO8A V+ 3 V- COMB 4 COMA N.C. TOP VIEW NO8B Pin Configurations/Functional Diagrams/Truth Tables (continued) 28 27 26 NO7B 5 25 NO7A NO6B 6 24 NO6A NO5B 7 23 NO5A NO4B 8 22 NO4A NO3B 9 21 N03A NO2B 10 20 N02A NO1B 11 19 N01A MAX307 A0 COMA COMB CMOS DECODERS/DRIVERS A0 TEMP RANGE PIN-PACKAGE MAX307CPI 0C to +70C 28 PDIP MAX307CWI 0C to +70C 28 Wide SO MAX307C/D 0C to +70C Dice* MAX307EPI -40C to +85C 28 PDIP MAX307EWI -40C to +85C 28 Wide SO MAX307EQI -40C to +85C 28 PLCC MAX307EUI -40C to +85C 28 TSSOP MAX307MJI -55C to +125C MAX307MWI/PR -55C to +125C MAX307MWI/PR-T -55C to +125C *Contact factory for dice specifications. A1 A2 EN MAX307 8-CHANNEL DIFFERENTIAL MULTIPLEXER Ordering Information (continued) www.maximintegrated.com NO1A NO2A NO3A NO4A NO5A NO6A NO7A NO8A NO1B NO2B NO3B NO4B NO5B NO6B NO7B NO8B PLCC N.C. = NO INTERNAL CONNECTION PART GND EN A1 A2 N.C. N.C. GND 12 13 14 15 16 17 18 V- Package Information For the latest package outline information and land patterns (footprints), go to www.maximintegrated.com/packages. Note that a "+", "#", or "-" in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status. PACKAGE TYPE PACKAGE CODE OUTLINE NO. LAND PATTERN NO. 28 PDIP P28+3 21-0044 -- 28 CERDIP 28 Wide SO W28+6 21-0042 90-0109 28 Wide SO 28 PLCC Q28+4 21-0049 90-0235 28 Wide SO 28 CDIP J28-2 21-0046 -- 28 TSSOP U28+2 21-0066 90-0171 Maxim Integrated 11 MAX306/MAX307 Precision, 16-Channel/Dual 8-Channel, High-Performance, CMOS Analog Multiplexers Revision History REVISION NUMBER 3 REVISION DATE 3/10 PAGES CHANGED DESCRIPTION Changed the single-supply operating voltage minimum from +4.5V to +5V in the General Description, Features, and Applications Information sections. 1, 6 Added the soldering temperatures for all packages to the Absolute Maximum Ratings section. 2 11 4 5/14 Added MAX307MWI/PR and MAX307MWI/PR-T to the Ordering Information table. 5 3/16 Updated Electrical Characteristics table and Figure 2 3, 4, 6, 7 For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim Integrated's website at www.maximintegrated.com. Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time. The parametric values (min and max limits) shown in the Electrical Characteristics table are guaranteed. Other parametric values quoted in this data sheet are provided for guidance. Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc. (c) 2016 Maxim Integrated Products, Inc. 12