SXN15 Series Single output DC/DC CONVERTERS 10.8-15W High Efficiency DC/DC Converters 1 * High efficiency topology, 87% typical at 5V * Wide operating temperature, up to and exceeding 70C (natural convection) * 90% to 110% output trim * No minimum load * Overvoltage protection * Remote on/off control The SXN15 is a new high efficiency open frame isolated 15 Watt converter series in an industry standard footprint. The first four models in the series feature an input voltage range of 33 to 75VDC and are available in output voltages of 5V, 3.3V, 2.5V and 1.8V. The output voltage on each model is adjustable from 90% to 110% of the nominal value. Typical efficiencies for the models are 87% for the 5V, 86% for the 3.3V, 85% for the 2.5V and 83% for the 1.8V version. The SXN15 series also has a remote on/off capability with active high or active low logic. Overcurrent and overvoltage protection features are included as standard. With full international safety approval including EN60950 and cUL1950, the SXN15 reduces compliance costs and time to market. TUV 2 YEAR WARRANTY SPECIFICATIONS All specifications are typical at nominal input, full load at 25C unless otherwise stated OUTPUT SPECIFICATIONS EMC CHARACTERISTICS Voltage adjustability 90% to 110% Total error band (See Note 11) 3.5% max. Line regulation Low line to high line 1V8 and 2V5 models 3V3 and S05 models 0.5% max. 0.1% max. Load regulation Full load to min. load 1V8 model 2V5 model 3V3 and S05 models 2.0% max. 1.5% max. 0.5% max. Minimum load Overshoot At turn-on and turn-off 0% 1V8 and 2V5 models 3V3 and S05 models Undershoot Ripple and noise (See Note 1) 5Hz to 20MHz Transient response (See Note 2) typ. deviation 3.5% max. None None 1V8 and 2V5 models 3V3 and S05 models 40mV pk-pk 14mV rms 70mV pk-p 20mV rms 1V8 and 2V5 models 3V3 and S05 models 150mV 100mV 400s recovery to within total error band INPUT SPECIFICATIONS Input voltage range 48Vin nominal Input current No load Remote OFF 35mA max. 25mA max. Input current (max.) (See Note 4) 0.55A max. @ Io max. and Vin = 33 to 75V Input reflected ripple (See Note 6) 5mA (pk-pk) typ. Active high remote ON/OFF Logic compatibility ON OFF 33 to 75VDC (See Note 8) Open collector ref to -input Open circuit or >2VDC <1.2VDC Undervoltage lockout Power up Power down Start-up time (See Note 7) Power up Remote ON/OFF Conducted emissions Radiated emissions Immunity: ESD air ESD contact Radiated field enclosure Conducted (DC power) Conducted (signal) Input transients EN55022 (See Note 3) Level A EN55022 (See Note 3) Level B EN55022 (See Longform Data Sheet) Level B EN61000-4-2 8kV, 15kV EN61000-4-2 6kV, 8kV EN61000-4-3 10V/m EN61000-4-6 10V EN61000-4-6 10V ETS 300 132-2, ETR 283 (See Note 10) GENERAL SPECIFICATIONS Efficiency See table Operational insulation Input/output Switching frequency Fixed Approvals and standards (See Note 5) 1500VDC 265kHz typ. UL/cUL1950, EN60950 TUV Rheinland Material flammability UL94V-0 Weight MTBF Representative model: 12g (0.42oz) MIL-HDBK-217F >600,000 hours 48S05 @ 48Vin, 40C, 100% load ground benign BELLCORE 332 >1,500,000 hours ENVIRONMENTAL SPECIFICATIONS Thermal performance (See Note 9) Operating ambient temp. (3.3V and 5V) Operating ambient temp. (1.8V and 2.5V) Non-operating (All models) -40C to +65C -40C to +70C -40C to +120C 33V (typ.) 30V (typ.) 1.5ms (typ.) 2.5ms (typ.) File Name: SXN15S.PDF Rev: 16 Oct 2002 SXN15 Series Single output DC/DC CONVERTERS 10.8-15W High Efficiency DC/DC Converters 2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm OUTPUT POWER (MAX.) INPUT VOLTAGE OVP OUTPUT VOLTAGE OUTPUT CURRENT (MIN.) OUTPUT CURRENT (MAX.) EFFICIENCY (TYP.) LINE LOAD MODEL NUMBER (8) 10.8W 33-75VDC 2.3VDC 1.8V 0A 6A 83% 0.3% 2.0% SXN15-48S1V8 15W 33-75VDC 3.2VDC 2.5V 0A 6A 85% 0.3% 1.5% SXN15-48S2V5 15W 33-75VDC 4VDC 3.3V 0A 4.5A 86% 0.1% 0.5% SXN15-48S3V3 15W 33-75VDC 6VDC 5.0V 0A 3A 87% 0.1% 0.5% SXN15-48S05 Notes REGULATION PROTECTION 1 Measured as per recommended set-up. See Application Note 116 for further details. 2 di/dt = 0.1A/s, Vin = 48VDC, Tc = 25C, load change = 0.5 lo max. to 0.75 lo max. and 0.75 lo max. to 0.5 lo max. 3 The SXN15 meets level A and level B conducted emissions only with external components connected before the input pins to the converter. See Application Note 116 for further details. 4 Recommended input fusing is a 2A HRC 200V rated fuse. 5 This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 6 Measured with external filter. See Application Note 116 for further details. 7 Start-up into resistive load. 8 Active low remote on/off is available. Standard product is active high. Designate with the Suffix '-R' e.g. SXN15-48S05-R. 9 Operating ambient temperatures are specified at natural convection. Higher operating temperatures are possible with increased airflow. See Application Note 116 for further details. 10 Signal Line assumed < 3m in length. 11 This parameter is calculated at worst case line, load, temperature and initial settings. Continuous Overvoltage protection Non-latching clamp TELECOM SPECIFICATION Central office interface A ETS300-132-2, input voltage and current requirements CAUTION: Hazardous internal voltages and high temperatures. Ensure that unit is not user accessible. PIN CONNECTIONS PIN NUMBER Short circuit protection 1.905 (48.39) All Dimensions in Inches [mm] FEATURE 1 Vout + 2 Vout - 3 N/C 4 Trim 5 N/C 1.010 (25.65) TOP VIEW 0.335 (8.51) SIDE VIEW 1 0.072 (1.83) 0.820 (20.83) 0.110 (2.79) 0.020 (0.51) 0.120 (3.05) 1 6 2 3 4 5 Tolerance: .015 ( .38) Recommended Land & Hole Pattern 0.070 (1.78) 6 N/C 1.031 (26.19) BOTTOM VIEW 7 N/C 8 On/Off 9 N/C 0.840 (21.37) 0.197 (5.00) 0.197 (5.00) 11 10 9 8 7 0.347 (8.81) 10 Vin - 11 Vin + 0.105 (2.67) 0.302 (7.67) 1.136 (28.85) 1.483 (37.67) 1.680 (42.67) 11 10 9 8 7 1.020 (25.91) 0.800 (20.32) 0.130 (3.30) 0.110 (2.79) 1 2 3 4 5 6 1.705 (43.31) International Safety Standard Approvals UL/cUL 1950 3rd edition. File No. E135734 TUV TUV Rheinland. Certificate No. R2074133 Data Sheet (c) Artesyn Technologies(R) 2002 The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. Please consult our website for the following items: Application Note Longform Data Sheet www.artesyn.com File Name: SXN15S.PDF Rev: 16 Oct 2002