LED INDICATORS -Q D IN 07 18 8- Q8 series O8 mm panel mount LED indicators DISTINCTIVE FEATURES 5mm colored diffused epoxy lens or 5 mm water clear super bright LEDs Prominent, recessed and flush bezel styles (2.8 x 0.8) solder lug/faston terminals, pins or (200 mm long) wire terminations (2.0 x 0.5) solder lug/faston terminals on tri-color versions ENVIRONMENTAL SPECIFICATIONS * IP67 sealing option (EN60529) * Operating & Storage Temperature Range: Rear plastic body: -30 C to +65 C ( -22 F to +149 F) Rear epoxy body: -40 C to +85 C ( -40 F to +185 F) GENERAL SPECIFICATIONS * Max Reverse Voltage: 5 V * Viewing Angle: 30-100 (dependant on model) * Life Expectancy: 100,000 hours * Torque: 20 to 25 cNm * Maximum panel thickness 7 mm MATERIALS * Plated brass bezel finished in bright chrome, black or satin grey and moulded polycarbonate rear body MOUNTING The company reserves the right to change specifications without notice. All LED characteristics are dependent upon environmental conditions. Therefore published data should be considered nominal and subject to variations. 1 LED INDICATORS Q8 series O8 mm panel mount LED indicators ELECTRICAL SPECIFICATIONS Voltage STANDARD LED INTENSITY LED COMPONENT SPECIFICATIONS Operating Current (Min to Max) (Typical All Types) Prominent and Recessed Flush Forward Voltage 02 (No Resistor)* 1.8 to 3.3 VDC 20 mA max HE Red 80 mcd 8 mcd 2.0 V 6 VDC 5.4 to 6.6 VDC 20 mA Green 60 mcd 6 mcd 2.2 V 12 VDC 10.8 to 13.2 VDC 20 mA 24 VDC 21.6 to 26.4 VDC 20 mA Yellow 50 mcd 6 mcd 2.1 V Blue 1,600 mcd 50 mcd 3.3 V White 1,600 mcd 500 mcd 3.3 V Orange 60 mcd 110 mcd 2.2 V Bi-color (Typical) (Red/Green) 14/30 mcd 15/10 mcd 2.0V/2.2 V Tri-color (Typical) (Red/Green/Yellow) 60/15/13 mcd 15/10/6 mcd 2.0 V/2.2 V/2.1 V Bi-color - The color is changed by reversing the polarity of the supply voltage. Tri-color - The indicator has red and green LEDs, when both connected yellow is produced. SUPER BRIGHT LED INTENSITY LED COMPONENT SPECIFICATIONS Prominent and Recessed Flush Forward Voltage HE Red 5,000 mcd 1,300 mcd 2.2 V Green 10,000 mcd 1,200 mcd 3.3 V Yellow 4,000 mcd 350 mcd 2.0 V Blue 2,200 mcd 280 mcd 3.3 V White 2,500 mcd 950 mcd 3.3 V Orange 4,000 mcd 500 mcd 2.2 V HYPER BRIGHT LED INTENSITY LED COMPONENT SPECIFICATIONS HE Red Prominent and Recessed Flush Forward Voltage 6,000 mcd 980 mcd 2.2 V Green 1,900 mcd 300 mcd 3.3 V Yellow 1,600 mcd 250 mcd 2.0 V Orange 2,400 mcd 110 mcd 2.2 V * The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy * Luminous intensity is measured at 20 mA on a discrete led unless otherwise stated. * Luminous intensities and color shades of white LEDs may vary within a batch. * Luminous intensity will be reduced with lower operating current. 2 Operating Voltage 28 VDC 25.2 to 30.8 VDC 20 mA 110 VAC 99 to 121 VAC 6 mA 220 VAC 207 to 235 VAC 3 mA * Customer to supply resistor for desired operating current. O8 mm panel mount LED indicators BUILD YOUR PART NUMBER Q SERIES BEZEL STYLE MOUNTING HOLE 8 O8 mm P Prominent R Recessed F Flush TERMINALS 1 Solder Lug/ Fastons (2.8 x 0.8) 2 Pins 3 Wires 4 Rear epoxy Pins BEZEL FINISH 5 Rear epoxy Wires C Bright Chrome 6 Short body Pins B Black 7 Short body Wires G Satin Grey 8 Short body Lug/ Fastons (2.8 x 0.8) 9 Extended short body solder Lug/ Fastons (2.8 x 0.5) VOLTAGE LED COLOR TYPE OF ILLUMINATION XX Fixed Light R Red KK Flashing Light (12V - 28VDC) G Green YY Bi-color Y Yellow ZZ Tri-color B W O HR Blue White Orange Hyper Bright Red 02 no resistor* 06 6 VDC 12 12 VDC HG Hyper Bright Green SW Super Bright White HY Hyper Bright Yellow SO Super Bright Orange HO Hyper Bright Orange RG Red/Green RY 12A Red/Yellow GY 24 Green/Yellow SR Super Bright Red SG Super Bright Green SY Super Bright Yellow SB Super Bright Blue RYG Red/Yellow/ Green ABOUT THIS SERIES 24A 28 SEALING (Blank) E Unsealed IP67 12 VAC/DC 24 VDC 24 VAC/DC 28 VDC 28A 28 VAC/DC 110 110 VAC 220 220 VAC * please refer to the forward voltage in electrical specifications Notice: please note that not all combinations of above numbers are available. * Gold faston terminal denotes anode (+), silver terminal denotes cathode (-) * Terminal code 8 is only available without integral resistor, see forward voltage values. * Standard wire length is 200 mm, 24 AWG UL1061, red wire denotes anode (+), black wire denotes cathode (-) for other wire lengths consult APEM * We recommend using hyperbright or superbright leds for use at 110 VAC and 220 VAC * 110 VAC and 220 VAC, only available with terminal options 1 & 3 * Mains voltage product is not recommended for use on 3 phase appliances * Bi-color leds, by connecting the gold faston (+) one color is produced, by reversing the supply voltage another color is produced - bi-colors are available up to 28 VDC [AC products not available] * The tri-color led has red and green leds when both are connected yellow is produced * Take care when soldering to the faston terminals (recommended solder temperature 300 C - 3 sec) * Tri-color wires are one red (+) and one green (+) anode and one black (-) cathode * Terminal options 2,6,7 & 9 are only available up to 28 V (DC only). Tri-color not available with terminal 9 * Standard tri-color faston terminals are two anodes (+) and one cathode (-) * Tri-color pins are center (-) cathode, shortest (+) anode pin green, longest (+) anode pin red 3 LED INDICATORS Q8 series LED INDICATORS Q8 series O8 mm panel mount LED indicators PROMINENT BEZEL SOLDER LUG/FASTON WIRES PINS REAR EPOXY WIRES REAR EPOXY PINS SHORT BODY WIRES SHORT BODY PINS 4 O8 mm panel mount LED indicators PROMINENT BEZEL (CONTINUED) EXTENDED SHORT BODY SOLDER LUG/FASTONS FLUSH BEZEL SOLDER LUG/FASTON WIRES PINS REAR EPOXY WIRES REAR EPOXY PINS SHORT BODY SOLDER LUG/FASTONS 5 LED INDICATORS Q8 series LED INDICATORS Q8 series O8 mm panel mount LED indicators FLUSH BEZEL (CONTINUED) SHORT BODY PINS SHORT BODY SOLDER LUG/FASTONS EXTENDED SHORT BODY SOLDER LUG/FASTONS RECESSED BEZEL SOLDER LUG/FASTON WIRES PINS SHORT BODY WIRES 6 O8 mm panel mount LED indicators RECESSED BEZEL (CONTINUED) REAR EPOXY PINS SHORT BODY WIRES SHORT BODY PINS SHORT BODY SOLDER LUG/FASTONS EXTENDED SHORT BODY SOLDER LUG/FASTONS REAR EPOXY WIRES 7 LED INDICATORS Q8 series