• Plated brass bezel finished in bright chrome, black or satin grey
and moulded polycarbonate rear body
MATERIALS
• Max Reverse Voltage: 5 V
• Viewing Angle: 30–100° (dependant on model)
• Life Expectancy: 100,000 hours
• Torque: 20 to 25 cNm
• Maximum panel thickness 7 mm
GENERAL SPECIFICATIONS
The company reserves the right to change specifications without notice.
5mm colored diffused epoxy lens or 5 mm water clear
super bright LEDs
Prominent, recessed and flush bezel styles
(2.8 x 0.8) solder lug/faston terminals, pins or (200 mm long)
wire terminations (2.0 x 0.5) solder lug/faston terminals on
tri-color versions
DISTINCTIVE FEATURES
• IP67 sealing option (EN60529)
• Operating & Storage Temperature Range:
Rear plastic body: -30 °C to +65 °C ( –22 °F to +149 °F)
Rear epoxy body: -40 °C to +85 °C ( –40 °F to +185 °F)
ENVIRONMENTAL SPECIFICATIONS
Q8 series
Ø8 mm panel mount LED indicators
MOUNTING
All LED characteristics are dependent upon environmental conditions. Therefore published data
should be considered nominal and subject to variations. 1
LED INDICATORS
IND-Q8-1807
Ø8 mm panel mount LED indicators
Q8 series
ELECTRICAL SPECIFICATIONS
Voltage Operating Voltage Operating Current
(Min to Max) (Typical All
Types)
02 (No Resistor)* 1.8 to 3.3 VDC 20 mA max
6 VDC 5.4 to 6.6 VDC 20 mA
12 VDC 10.8 to 13.2 VDC 20 mA
24 VDC 21.6 to 26.4 VDC 20 mA
28 VDC 25.2 to 30.8 VDC 20 mA
110 VAC 99 to 121 VAC 6 mA
220 VAC 207 to 235 VAC 3 mA
* Customer to supply resistor for desired operating
current.
LED COMPONENT SPECIFICATIONS
Prominent and
Recessed Flush Forward Voltage
HE Red 80 mcd 8 mcd 2.0 V
Green 60 mcd 6 mcd 2.2 V
Yellow 50 mcd 6 mcd 2.1 V
Blue 1,600 mcd 50 mcd 3.3 V
White 1,600 mcd 500 mcd 3.3 V
Orange 60 mcd 110 mcd 2.2 V
Bi-color (Typical)
(Red/Green) 14/30 mcd 15/10 mcd 2.0V/2.2 V
Tri-color (Typical)
(Red/Green/Yellow) 60/15/13 mcd 15/10/6 mcd 2.0 V/2.2 V/2.1 V
Bi-color - The color is changed by reversing the polarity of the supply voltage.
Tri-color - The indicator has red and green LEDs, when both connected yellow is
produced.
STANDARD LED INTENSITY
LED COMPONENT SPECIFICATIONS
Prominent and
Recessed Flush Forward Voltage
HE Red 5,000 mcd 1,300 mcd 2.2 V
Green 10,000 mcd 1,200 mcd 3.3 V
Yellow 4,000 mcd 350 mcd 2.0 V
Blue 2,200 mcd 280 mcd 3.3 V
White 2,500 mcd 950 mcd 3.3 V
Orange 4,000 mcd 500 mcd 2.2 V
SUPER BRIGHT LED INTENSITY
LED COMPONENT SPECIFICATIONS
Prominent and
Recessed Flush Forward Voltage
HE Red 6,000 mcd 980 mcd 2.2 V
Green 1,900 mcd 300 mcd 3.3 V
Yellow 1,600 mcd 250 mcd 2.0 V
Orange 2,400 mcd 110 mcd 2.2 V
HYPER BRIGHT LED INTENSITY
• The operating voltage must not be exceeded by more that
10% as this will result in reduced life expectancy
• Luminous intensity is measured at 20 mA on a discrete led
unless otherwise stated.
• Luminous intensities and color shades of white LEDs may
vary within a batch.
• Luminous intensity will be reduced with lower operating
current.
2
LED INDICATORS
BUILD YOUR PART NUMBER
Ø8 mm panel mount LED indicators
Q8 series
LED COLOR
XX Fixed Light
KK Flashing Light
(12V – 28VDC)
YY Bi-color
ZZ Tri-color
TYPE OF ILLUMINATION
02 no resistor*
06 6 VDC
12 12 VDC
12A 12 VAC/DC
24 24 VDC
24A 24 VAC/DC
28 28 VDC
28A 28 VAC/DC
110 110 VAC
220 220 VAC
VOLTAGE
(Blank) Unsealed
EIP67
SEALING
1Solder Lug/ Fastons
(2.8 x 0.8)
2Pins
3Wires
4Rear epoxy Pins
5Rear epoxy Wires
6Short body Pins
7Short body Wires
8Short body Lug/ Fastons
(2.8 x 0.8)
9
Extended short body
solder Lug/ Fastons
(2.8 x 0.5)
CBright Chrome
BBlack
GSatin Grey
SERIES
Q
MOUNTING HOLE
8Ø8 mm PProminent
RRecessed
FFlush
BEZEL STYLE TERMINALS BEZEL FINISH
RRed
GGreen
YYellow
BBlue
WWhite
OOrange
HR Hyper Bright
Red
HG Hyper Bright
Green
HY Hyper Bright
Yellow
HO Hyper Bright
Orange
SR Super Bright
Red
SG Super Bright
Green
SY Super Bright
Yellow
SB Super Bright
Blue
SW Super Bright
White
SO Super Bright
Orange
RG Red/Green
RY Red/Yellow
GY Green/Yellow
RYG Red/Yellow/
Green
ABOUT THIS SERIES
Notice: please note that not all combinations of above numbers are available.
* please refer to the
forward voltage in
electrical specifications
• Gold faston terminal denotes anode (+), silver terminal denotes
cathode (-)
• Standard wire length is 200 mm, 24 AWG UL1061, red wire
denotes anode (+), black wire denotes cathode (-) for other wire
lengths consult APEM
• 110 VAC and 220 VAC, only available with terminal options 1 & 3
• Bi-color leds, by connecting the gold faston (+) one color is
produced, by reversing the supply voltage another color is
produced – bi-colors are available up to 28 VDC [AC products not
available]
• Take care when soldering to the faston terminals (recommended
solder temperature 300 °C - 3 sec)
• Terminal options 2,6,7 & 9 are only available up to 28 V (DC only).
Tri-color not available with terminal 9
• Terminal code 8 is only available without integral resistor, see
forward voltage values.
• We recommend using hyperbright or superbright leds for use at
110 VAC and 220 VAC
• Mains voltage product is not recommended for use on 3 phase
appliances
• The tri-color led has red and green leds when both are
connected yellow is produced
• Standard tri-color faston terminals are two anodes (+) and one
cathode (-)
• Tri-color wires are one red (+) and one green (+) anode and one
black (-) cathode
• Tri-color pins are center (–) cathode, shortest (+) anode pin
green, longest (+) anode pin red
3
LED INDICATORS
WIRES
REAR EPOXY WIRES
SHORT BODY WIRES
PINS
REAR EPOXY PINS
SHORT BODY PINS
PROMINENT BEZEL SOLDER LUG/FASTON
Ø8 mm panel mount LED indicators
Q8 series
LED INDICATORS
4
REAR EPOXY PINS
REAR EPOXY WIRES
WIRES PINS
SOLDER LUG/FASTON
FLUSH BEZEL
Ø8 mm panel mount LED indicators
Q8 series
SHORT BODY SOLDER LUG/FASTONS
EXTENDED SHORT BODY SOLDER LUG/FASTONS
PROMINENT BEZEL (CONTINUED)
5
LED INDICATORS
WIRES PINS
SOLDER LUG/FASTON
RECESSED BEZEL
Ø8 mm panel mount LED indicators
Q8 series
SHORT BODY WIRES
SHORT BODY PINS
SHORT BODY SOLDER LUG/FASTONS EXTENDED SHORT BODY SOLDER LUG/FASTONS
FLUSH BEZEL (CONTINUED)
LED INDICATORS
6
REAR EPOXY PINS
SHORT BODY WIRES SHORT BODY PINS
REAR EPOXY WIRES
SHORT BODY SOLDER LUG/FASTONS EXTENDED SHORT BODY SOLDER LUG/FASTONS
RECESSED BEZEL (CONTINUED)
Ø8 mm panel mount LED indicators
Q8 series
7
LED INDICATORS
