SMT Power Inductor High Current Molded Power Inductor - PA4341.XXXANLT Series Height: 3.0mm Max Footprint: 7.4mm x 6.8mm Max Current Rating: up to 30.0A Inductance Range: 0.15uH to 22.0uH Shielded construction and compact design High current, low DCR, and high efficiency Minimized acoustic noise and minimized leakage flux uH20% 0.15* A 30.0 PA4341.221ANLT 0.22 23.0 PA4341.331ANLT PA4341.361ANLT PA4341.471ANLT PA4341.561ANLT PA4341.681ANLT PA4341.821ANLT PA4341.102ANLT PA4341.122ANLT PA4341.152ANLT PA4341.222ANLT PA4341.272ANLT PA4341.332ANLT PA4341.472ANLT PA4341.562ANLT PA4341.682ANLT PA4341.822ANLT PA4341.103ANLT PA4341.153ANLT PA4341.223ANLT 0.33 0.36 0.47 0.56 0.68 0.82 1.00 1.20 1.50 2.20 2.70 3.30 4.70 5.60 6.80 8.20 10.0 15.0 22.0 PR 1 MAX. TYP. m 2.1 m 1.7 A 40.0 2.5 2.0 34.0 3.4 3.9 4.0 4.5 5.3 6.0 7.4 9.5 12.1 15.0 20.0 22.0 33.0 42.0 50.0 60.0 68.0 140 190 2.8 3.3 3.4 3.9 4.7 5.4 6.7 7.7 10.2 13.5 17.3 19.0 28.0 39.0 43.0 54.0 62.0 110 150 25.0 24.0 20.0 18.0 17.0 16.0 15.0 14.0 14.0 10.0 9.8 9.5 6.5 6.0 6.0 6.0 5.5 4.5 3.0 IM 21.0 20.0 18.0 16.5 16.0 14.0 12.0 10.0 10.0 8.0 7.2 6.5 5.5 5.5 4.5 4.5 4.0 3.0 2.5 EL Part Number PA4341.151ANLT Saturation Current Max. AR Rated Current DC Resistance IN Inductance 100KHz, 1V Y Electrical Specifications @ 25C - Operating Temperature -55C to +155C power.pulseelectronics.com P820.B (11/17) http://www.power.pulseelectronics.com/contact SMT Power Inductor High Current Molded Power Inductor - PA4341.XXXANLT Series Notes: 1. Actual temperature of the component during system operation (ambient plus tempera- 4. The rated current is the DC current required to raise the component temperature by ture rise) must be within the standard operating range. approximately 40C. Take note that the components' performanc varies depending on the 2. The saturation current is the current at which the initial inductance drops approxisystem condition. It is suggested that the component be tested at the system level, to mately 30% at the stated ambient temperature. This current is determined by placing verify the temperature rise of the component during system operation. the component in the specified ambient environment and applying a short duration 5. The part temperature (ambient+temp rise) should not exceed 155C under worst case pulse current (to eliminate self-heating effect) to the component. operating conditions. Circuit design, PCB trace size and thickness, airflow and other cool3. Please note that the inductance tolerance is 20% for all parts except PA4341.151NLT(30%) ing provisions all affect the part temperature. Part temperature should be verified in the end application. Mechanical L AR XXXANL D/C B D E IN T Final Layout A A B PA4341.XXXANLT 7.10.3 6.40.3 6.60.2 All Dimensions in mm. E T L G H 2.80.2 1.60.3 3.00.2 0~0.15 8.0 3.7 3.4 Chip cavity Blank portions K0 A W PR Blank portions SUGGESTED PAD LAYOUT D EL TAPE & REEL INFO G C IM Series H C A A Y PA4341.XXXANLT P1 200mm or more 400mm or more G Direction of tape SURFACE MOUNTING TYPE, REEL/TAPE LIST REEL SIZE (mm) A PA4341.XXXANLT 2 O330 power.pulseelectronics.com G TAPE SIZE (mm) P1 16.4+2/-0 12.00.1 P820.B (11/17) QTY W K0 PCS/REEL 160.3 3.30.1 1000 http://www.power.pulseelectronics.com/contact SMT Power Inductor High Current Molded Power Inductor - PA4341.XXXANLT Series Typical Performance Curves EL PR IN IM AR 3 power.pulseelectronics.com Y P820.B (11/17) http://www.power.pulseelectronics.com/contact SMT Power Inductor High Current Molded Power Inductor - PA4341.XXXANLT Series IN IM EL 4 power.pulseelectronics.com PR AR Y P820.B (11/17) http://www.power.pulseelectronics.com/contact SMT Power Inductor High Current Molded Power Inductor - PA4341.XXXANLT Series EL 5 power.pulseelectronics.com PR IN IM AR Y P820.B (11/17) http://www.power.pulseelectronics.com/contact SMT Power Inductor High Current Molded Power Inductor - PA4341.XXXANLT Series Y IN LIM AR PR E For More Information Pulse Worldwide Pulse Europe Headquarters Pulse Electronics GmbH 15255 Innovation Drive Ste 100 Am Rottland 12 San Diego, CA 92128 58540 Meinerzhagen U.S.A. Germany Tel: 858 674 8100 Fax: 858 674 8262 Tel: 49 2354 777 100 Fax: 49 2354 777 168 Pulse China Headquarters Pulse Electronics (ShenZhen) CO., LTD D708, Shenzhen Academy of Aerospace Technology, The 10th Keji South Road, Nanshan District, Shenzhen, P.R. China 518057 Pulse North China Room 2704/2705 Super Ocean Finance Ctr. 2067 Yan An Road West Shanghai 200336 China Pulse South Asia 135 Joo Seng Road #03-02 PM Industrial Bldg. Singapore 368363 Pulse North Asia 1F., No.111 Xiyuan Rd Zhongli City Taoyuan City 32057 Taiwan (R.O.C) Tel: 86 755 33966678 Fax: 86 755 33966700 Tel: 86 21 62787060 Fax: 86 2162786973 Tel: 65 6287 8998 Fax: 65 6280 0080 Tel: 886 3 4356768 Fax: 886 3 4356820 Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. (c) Copyright, 2017. Pulse Electronics, Inc. All rights reserved. 6 5 power.pulseelectronics.com P820.B (11/17) http://www.power.pulseelectronics.com/contact