IRLL014N
2 www.irf.com
Parameter Min. Typ. Max. Units Conditions
V(BR)DSS Drain-to-Source Breakdown Voltage 55 –– – –– – V VGS = 0V, ID = 250µA
∆V(BR)DSS/∆TJBreakdown Voltage Temp. Coefficient ––– 0.015 ––– V/°C Reference to 25°C, ID = 1mA
––– ––– 0.14 VGS = 10V, ID = 2.0A
––– ––– 0.20 ΩVGS = 5.0V, ID = 1.2A
––– ––– 0.28 VGS = 4.0V, ID = 1.0A
VGS(th) Gate Threshold Voltage 1.0 ––– 2 .0 V VDS = VGS, ID = 250µA
gfs Forward Transconductance 2.3 ––– ––– S VDS = 25V, I D = 1.0A
––– ––– 25 µA VDS = 55V, VGS = 0V
––– ––– 250 VDS = 44V, VGS = 0V, TJ = 150°C
Gate-to-Source Forward Leakage ––– –– – 100 nA VGS = 16V
Gate-to-Source Reverse Leakage ––– ––– -100 VGS = -16V
QgTotal Gate Charge –– – 9.5 14 ID = 2.0A
Qgs Gate-to-Source Charge ––– 1.1 1. 7 nC VDS = 44V
Qgd Gate-to-Drain ("Miller") Charge ––– 3.0 4. 4 VGS = 10V, See Fig. 6 and 9
td(on) Turn-On Delay Time ––– 5.1 ––– VDD = 28V
trRise Time ––– 4.9 ––– ns ID = 2.0A
td(off) Turn-Off Delay Time ––– 14 ––– RG = 6.0 Ω
tfFall Time ––– 2.9 ––– RD = 14Ω, See Fig. 10
Ciss Input Capacitance ––– 230 ––– VGS = 0V
Coss Output Capacitance ––– 66 ––– pF VDS = 25V
Crss Reverse Transfer Capacitance ––– 30 ––– ƒ = 1.0MHz, See Fig. 5
Electrical Characteristics @ TJ = 25°C (unless otherwise specified)
IGSS
RDS(on) Static Drain-to-Source On-Resistance
IDSS Drain-to-Source Leakage Current
Repetitive rating; pulse width limited by
max. junction temperature. ( See fig. 11 ) ISD ≤ 2.0A, di/dt ≤ 170A/µs, VDD ≤ V(BR)DSS,
TJ ≤ 150°C
Notes:
VDD = 25V, starting TJ = 25°C, L = 4.0mH
RG = 25Ω, IAS = 4.0A. (See Figure 12) Pulse width ≤ 300µs; duty cycle ≤ 2%.
Parameter Min. Typ. Max. Units Conditions
ISContinuous Source Current MOSFET symbol
(Body Diode) showing the
ISM Pulsed Source Current integral reverse
(Body Diode) p-n junction diode.
VSD Diode Forward Voltage ––– ––– 1 .0 V TJ = 25°C, IS = 2.0A, VGS = 0V
trr Reverse Recovery Time ––– 41 61 ns TJ = 25°C, I F = 2.0A
Qrr Reverse RecoveryCharge ––– 73 110 nC di/dt = 100A/µs
ton Forward Turn-On Time Intrinsic turn-on time is negligible (turn-on is dominated by LS+LD)
Source-Drain Ratings and Characteristics
––– –––
––– ––– 16
1.3 A