1N4001 thru 1N4007 Vishay General Semiconductor General Purpose Plastic Rectifier Major Ratings and Characteristics IF(AV) 1.0 A VRRM 50 V to 1000 V IFSM 30 A VF 1.1 V IR 5.0 A Tj max. 150 C DO-204AL (DO-41) Features Mechanical Data * * * * Case: DO-204AL, molded epoxy body Epoxy meets UL-94V-0 Flammability rating Terminals: Matte tin plated (E3 Suffix) leads, solderable per J-STD-002B and JESD22-B102D Polarity: Color band denotes cathode end Low forward voltage drop Low leakage current High forward surge capability Solder Dip 260 C, 40 seconds Typical Applications For use in general purpose rectification of power supplies, inverters, converters and freewheeling diodes application. (Note: These devices are not Q101 qualified. Therefore, the devices specified in this datasheet have not been designed for use in automotive or Hi-Rel applications.) Maximum Ratings (TA = 25 C unless otherwise noted) Symbol 1N4001 1N4002 Maximum repetitive peak reverse voltage Parameter VRRM 50 100 Maximum RMS voltage 1N4003 1N4004 1N4005 1N4006 1N4007 Unit 200 400 600 800 1000 V VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward rectified current 0.375" (9.5 mm) lead length at TA = 75 C IF(AV) 1.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 30 A Maximum full load reverse current, full cycle average 0.375" (9.5 mm) lead length TL = 75 C IR(AV) 30 A TJ, TSTG - 50 to + 150 C Operating junction and storage temperature range Document Number 88503 25-Aug-05 www.vishay.com 1 1N4001 thru 1N4007 Vishay General Semiconductor Electrical Characteristics (TA = 25 C unless otherwise noted) Parameter Test condition Symbol 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 Unit VF 1.1 V Maximum DC reverse current at TA = 25 C rated DC blocking voltage TA = 125 C IR 5.0 50 A Typical junction capacitance CJ 15 pF Maximum instantaneous forward voltage at 1.0 A at 4.0 V, 1 MHz Thermal Characteristics (TA = 25 C unless otherwise noted) Parameter Typical thermal resistance(1) Symbol 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 Unit RJA RJL 50 25 C/W Notes: (1) Thermal resistance from junction to ambient at 0.375" (9.5 mm) lead length, P.C.B. mounted Ratings and Characteristics Curves 30 1.0 60 Hz Resistive or Inductive Load 0.8 0.2 x 0.2" (5.0 x 5.0 mm) Copper Pads 0.6 0.4 0.2 0 0.375" (9.5 mm) Lead Length 0 25 50 75 100 125 150 Junction Temperature (C) Figure 1. Forward Current Derating Curve www.vishay.com 2 Peak Forward Surge Current (A) Average Forward Rectified Current (A) (TA = 25 C unless otherwise noted) 175 TA = 75 C 8.3 ms Single Half Sine-Wave 25 20 15 10 5.0 1 10 100 Number of Cycles at 60 Hz Figure 2. Maximum Non-repetitive Peak Forward Surge Current Document Number 88503 25-Aug-05 1N4001 thru 1N4007 Vishay General Semiconductor 100 TJ = 25 C f = 1.0 MHz Vsig = 50mVp-p 10 Junction Capacitance (pF) Instantaneous Forward Current (A) 20 TJ = 25 C Pulse Width = 300s 1 % Duty Cycle 1 0.1 0.01 0.6 10 1 0.8 1.0 1.2 1.4 1.6 1.8 0.1 1 Figure 3. Typical Instantaneous Forward Characteristics 100 Figure 5. Typical Junction Capacitance 100 Transient Thermal Impedance (C/W) 1000 Instantaneous Reverse Current (A) 10 Reverse Voltage (V) Instantaneous Forward Voltage (V) TJ = 150 C 100 10 TJ = 100 C 1 TJ = 25 C 0.1 0.01 0 20 40 60 80 10 1 0.1 0.01 100 Percentage of Peak Reverse Voltage (%) 0.1 1 10 100 t-Pulse Duration (sec.) Figure 4. Typical Reverse Characteristics Figure 6. Typical Transient Thermal Impedance Package outline dimensions in inches (millimeters) DO-204AL (DO-41) 1.0 (25.4) MIN. 0.107 (2.7) 0.080 (2.0) DIA. 0.205 (5.2) 0.160 (4.1) 1.0 (25.4) MIN. 0.034 (0.86) 0.028 (0.71) DIA. NOTE: Lead diameter is 0.026 (0.66) for suffix "E" part numbers 0.023 (0.58) Document Number 88503 25-Aug-05 www.vishay.com 3 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1