1N4001 thru 1N4007
Document Number 88503
25-Aug-05
Vishay General Semiconductor
www.vishay.com
1
DO-204AL (DO-41)
General Purpose Plastic Rectifier
Major Ratings and Characteristics
IF(AV) 1.0 A
VRRM 50 V to 1000 V
IFSM 30 A
VF1.1 V
IR 5.0 μA
Tj max. 150 °C
Features
• Low forward voltage drop
• Low leakage current
• High forward surge capability
• Solder Dip 260 °C, 40 seconds
Typical Applications
For use in general purpose rectification of power sup-
plies, inverters, converters and freewheeling diodes
application.
(Note: These devices are not Q101 qualified. There-
fore, the devices specified in this datasheet have not
been designed for use in automotive or Hi-Rel appli-
cations.)
Mechanical Data
Case: DO-204AL, molded epoxy body
Epoxy meets UL-94V-0 Flammability rating
Terminals: Matte tin plated (E3 Suffix) leads,
solderable per J-STD-002B and JESD22-B102D
Polarity: Color band denotes cathode end
Maximum Ratings
(TA = 25 °C unless otherwise noted)
Parameter Symbol 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 Unit
Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V
Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V
Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V
Maximum average forward rectified current
0.375" (9.5 mm) lead length at TA = 75 °C
IF(AV) 1.0 A
Peak forward surge current 8.3 ms single half
sine-wave superimposed on rated load
IFSM 30 A
Maximum full load reverse current, full cycle
average 0.375" (9.5 mm) lead length TL = 75 °C
IR(AV) 30 µA
Operating junction and storage temperature
range
TJ, TSTG - 50 to + 150 °C
www.vishay.com
2
Document Number 88503
25-Aug-05
1N4001 thru 1N4007
Vishay General Semiconductor
Electrical Characteristics
(TA = 25 °C unless otherwise noted)
Thermal Characteristics
(TA = 25 °C unless otherwise noted)
Notes:
(1) Thermal resistance from junction to ambient at 0.375" (9.5 mm) lead length, P.C.B. mounted
Ratings and Characteristics Curves
(TA = 25 °C unless otherwise noted)
Parameter Test condition Symbol 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 Unit
Maximum instantaneous
forward voltage
at 1.0 A VF 1.1 V
Maximum DC reverse current at
rated DC blocking voltage
TA = 25 °C
TA = 125 °C
IR 5.0
50
µA
Typical junction capacitance at 4.0 V, 1 MHz CJ 15 pF
Parameter Symbol 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 Unit
Typical thermal resistance(1) RθJA
RθJL
50
25
°C/W
Figure 1. Forward Current Derating Curve
0025 50 75 100 125 150 175
0.2
0.4
0.6
0.8
1.0
60 Hz Resistive or
Inductive Load
0.2 x 0.2” (5.0 x 5.0 mm)
Copper Pads
0.375” (9.5 mm)
Lead Length
Junction Temperature (°C)
Average Forward Rectified Current (A)
Figure 2. Maximum Non-repetitive Peak Forward Surge Current
5.0
10
15
20
25
30
TA = 75 °C
8.3 ms Single Half Sine-Wave
Peak Forward Surge Current (A)
Number of Cycles at 60 Hz
1 10 100
1N4001 thru 1N4007
Document Number 88503
25-Aug-05
Vishay General Semiconductor
www.vishay.com
3
Package outline dimensions in inches (millimeters)
Figure 3. Typical Instantaneous Forward Characteristics
Figure 4. Typical Reverse Characteristics
0.6 0.81.0 1.2 1.4 1.6 1.8
0.01
0.1
1
10
20
TJ = 25 °C
Pulse Width = 300µs
1 % Duty Cycle
Instantaneous Forward Voltage (V)
Instantaneous Forward Current (A)
0
0.01
0.1
1
10
100
∝
60 80 10020 40
1000
T
J
= 150 °C
T
J
= 100 °C
T
J
= 25 °C
Percentage of Peak Reverse Voltage (%)
Instantaneous Reverse Current ( A)
Figure 5. Typical Junction Capacitance
Figure 6. Typical Transient Thermal Impedance
1
10
100
TJ = 25 °C
f = 1.0 MHz
Vsig = 50mVp-p
Reverse Voltage (V)
Junction Capacitance (pF)
0.1 1 10 100
0.1
10
100
1
t-Pulse Duration (sec.)
Transient Thermal Impedance (°C/W)
0.01 0.1 1 10 100
0.107 (2.7)
0.080 (2.0)
0.034 (0.86)
0.028(0.71)
DIA.
1.0 (25.4)
MIN.
1.0 (25.4)
MIN.
0.205 (5.2)
0.160 (4.1)
DIA.
DO-204AL (DO-41)
NOTE: Lead diameter is for suffix “E” part numbers
0.026 (0.66)
0.023 (0.58)
Legal Disclaimer Notice
Vishay
Document Number: 91000 www.vishay.com
Revision: 08-Apr-05 1
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
