Aluminum electrolytic capacitors
Snap-in capacitors
Series/Type: B43601
Date: November 2008
© EPCOS AG 2008. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
Long-life grade capacitors
Applications
Frequency converters
Uninterruptable power supplies
Switch-mode power supplies in industrial and entertainment
electronics
Features
Voltage derating (0.93 VR) enables 105 °C operation,
more details available upon request
Extremly high C/V product, ultra compact
Long useful life
High reliability
High ripple current capability
Different case sizes available for each capacitance value
RoHS-compatible
Construction
Charge/discharge-proof, polar
Aluminum case, fully insulated with PVC
Version with PET insulation available
Version with additional PET insulation cap on terminal side
available for insulating the capacitor from the PCB
Snap-in solder pins to hold component in place on PC-board
Minus pole marking on case surface
Minus pole not insulated from case
Overload protection by safety vent on the base
Terminals
Standard version with 2 terminals,
2 lengths available: 6.3 and 4.5 mm
3 terminals to ensure correct insertion: length 4.5 mm
Snap-in capacitors B43601
Long useful life and ultra compact 85 °C
Page 2 of 20Please read Cautions and warnings and
Important notes at the end of this document.
Specifications and characteristics in brief
Rated voltage VR200 ... 450 V DC
Surge voltage VS1.15 VR(for VR≤250 V DC)
1.10 VR(for VR≥400 V DC)
Rated capacitance CR82 ... 2700 µF
Capacitance tolerance ±20% M
Leakage current Ileak
(5 min, 20 °C)
Self-inductance ESL Approx. 20 nH
Useful life Requirements:
85 °C; VR; IAC,R > 10000 h ∆C/C ≤ ±30% of initial value
40 °C; VR; 1.15 IAC,R > 250000 h ESR ≤3 times initial specified limit
Ileak ≤initial specified limit
Voltage endurance test Post test requirements:
85 °C; VR5000 h ∆C/C ≤ ±10% of initial value
ESR ≤1.3 times initial specified limit
Ileak ≤initial specified limit
Vibration resistance
test
To IEC 60068-2-6, test Fc:
Displacement amplitude 0.35 mm, frequency range 10 Hz ... 55 Hz,
acceleration max. 5 g, duration 3 ×2 h.
Capacitor mounted by its body which is rigidly clamped to the work
surface.
Characteristics at low
temperature Max. impedance
ratio VR≤250 V ≥400 V
at 100 Hz Z-25 °C/Z20 °C4 7
Z-40 °C/Z20 °C7 12
IEC climatic category To IEC 60068-1:
VR≤250 V DC: 40/085/56 (40 °C/+85 °C/56 days damp heat test)
VR≥400 V DC: 25/085/56 (25 °C/+85 °C/56 days damp heat test)
The capacitors can be operated in the temperature range of
40 °C to +85 °C but the impedance at 40 °C should be taken into
consideration.
Detail specification
Sectional specification
Similar to CECC 30301-811
IEC 60384-4
B43601
Long useful life and ultra compact 85 °C
Page 3 of 20Please read Cautions and warnings and
Important notes at the end of this document.
Dimensional drawings
Snap-in capacitors with standard insulation (PVC or PET)
Snap-in terminals, length 6.3 ±1 mm. Also
available in a shorter version with a length of
4.5 1 mm. PET insulation is marked with
label "PET" on the sleeve.
Snap-in capacitors are also available with
3 terminals (length 4.5 1 mm). PET
insulation is marked with label "PET" on the
sleeve.
Dimensions (mm) Approx.
weight (g)
Packing
units (pcs.)
d +1 l ±2
22 25 9 160
22 30 12 160
22 35 15 160
22 40 18 160
22 45 20 160
22 50 24 160
25 25 13 130
25 30 17 130
25 35 19 130
25 40 22 130
25 45 25 130
25 50 29 130
25 55 32 130
Dimensions (mm) Approx.
weight (g)
Packing
units (pcs.)
d +1 l ±2
30 25 17 80
30 30 23 80
30 35 29 80
30 40 36 80
30 45 41 80
30 50 46 80
30 55 53 80
35 25 22 60
35 30 29 60
35 35 36 60
35 40 41 60
35 45 56 60
35 50 70 60
35 55 81 60
B43601
Long useful life and ultra compact 85 °C
Page 4 of 20Please read Cautions and warnings and
Important notes at the end of this document.
Snap-in capacitors with PVC insulation and PET insulation cap on terminal side
Snap-in terminals, length 6.3 +1/1.4 mm.
Also available in a shorter version with a
length of 4.5 1.4 mm. PET insulation cap is
positioned under the insulation sleeve.
Snap-in capacitors are also available with
3 terminals (length 4.5 1.4 mm). PET
insulation cap is positioned under the
insulation sleeve.
Dimensions (mm) Approx.
weight (g)
Packing
units (pcs.)
d +1.4 l +2.2/2
22 25 9 160
22 30 12 160
22 35 15 160
22 40 18 160
22 45 20 160
22 50 24 160
25 25 13 130
25 30 17 130
25 35 19 130
25 40 22 130
25 45 25 130
25 50 29 130
25 55 32 130
Dimensions (mm) Approx.
weight (g)
Packing
units (pcs.)
d +1.4 l +2.2/2
30 25 17 80
30 30 23 80
30 35 29 80
30 40 36 80
30 45 41 80
30 50 46 80
30 55 53 80
35 25 22 60
35 30 29 60
35 35 36 60
35 40 41 60
35 45 56 60
35 50 70 60
35 55 81 60
B43601
Long useful life and ultra compact 85 °C
Page 5 of 20Please read Cautions and warnings and
Important notes at the end of this document.
Packing of snap-in capacitors
For ecological reasons the packing is pure cardboard. Components can be withdrawn (in full or in
part) in the correct position for insertion.
Ordering codes for terminal styles and insulation features
Identification in 3rd block of ordering code
Snap-in capacitors
Terminal version Insulation version
PVC PET PVC plus PET cap
Standard terminals 6.3 mm M000 M060 M080
Short terminals 4.5 mm M007 M067 M087
3 terminals 4.5 mm M002 M062 M082
Ordering examples:
B43601A5107M007 } snap-in capacitor with short terminals and standard PVC insulation
B43601A5107M062 } snap-in capacitor with 3 terminals and PET insulation
B43601A5107M080 } snap-in capacitor with standard terminals and PVC insulation with
additional PET insulation cap on terminal side
B43601
Long useful life and ultra compact 85 °C
Page 6 of 20Please read Cautions and warnings and
Important notes at the end of this document.
Overview of available types
VR(V DC) 200 250 400 450
Case dimensions d ×l (mm)
CR(µF)
82 22 ×25
100 22 ×25 22 ×30
120 22 ×30 22 ×30
25 ×25
150 22 ×30
25 ×25
22 ×35
25 ×30
180 22 ×35
25 ×30
22 ×40
25 ×35
30 ×25
220 22 ×40
25 ×35
30 ×25
22 ×50
25 ×40
30 ×30
35 ×25
270 22 ×25 22 ×45
25 ×40
30 ×30
25 ×45
30 ×35
35 ×30
330 22 ×25 22 ×30
25 ×25
25 ×45
30 ×35
35 ×25
25 ×50
30 ×40
35 ×30
390 22 ×30 22 ×35
25 ×30
25 ×50
30 ×35
35 ×30
30 ×45
35 ×35
470 22 ×35
25 ×25
22 ×40
25 ×30
25 ×55
30 ×40
35 ×35
30 ×50
35 ×40
560 22 ×35
25 ×30
22 ×45
25 ×35
30 ×25
30 ×45
35 ×35
30 ×55
35 ×45
680 22 ×40
25 ×35
30 ×25
22 ×50
25 ×40
30 ×30
35 ×25
30 ×55
35 ×40
35 ×50
820 22 ×50
25 ×40
30 ×30
25 ×45
30 ×35
35 ×30
35 ×50
B43601
Long useful life and ultra compact 85 °C
Page 7 of 20Please read Cautions and warnings and
Important notes at the end of this document.
VR(V DC) 200 250 400 450
Case dimensions d ×l (mm)
CR(µF)
1000 25 ×45
30 ×35
35 ×25
25 ×55
30 ×40
35 ×30
35 ×55
1200 25 ×50
30 ×40
35 ×30
30 ×45
35 ×35
1500 30 ×45
35 ×35
30 ×55
35 ×40
1800 30 ×50
35 ×40
35 ×45
2200 35 ×45 35 ×55
2700 35 ×55
The capacitance and voltage ratings listed above are available in different cases upon request.
Other voltage and capacitance ratings are also available upon request.
B43601
Long useful life and ultra compact 85 °C
Page 8 of 20Please read Cautions and warnings and
Important notes at the end of this document.
Technical data and ordering codes
CR
100 Hz
20 °C
µF
Case
dimensions
d×l
mm
ESRtyp
100 Hz
20 °C
mΩ
ESRmax
100 Hz
20 °C
mΩ
Zmax
10 kHz
20 °C
mΩ
IAC,max
100 Hz
60 °C
A
IAC,R
100 Hz
85 °C
A
Ordering code
(composition see
below)
Composition of ordering code
* = Insulation feature # = Terminal style
0 = PVC insulation
6 = PET insulation
8 = PVC insulation with additional PET insulation
cap on terminal side
0 = snap-in standard terminals (6.3 mm)
2 = snap-in 3 terminals (4.5 mm)
7 = snap-in short terminals (4.5 mm)
VR= 200 V DC
330 22 ×25 290 510 400 2.79 1.42 B43601A2337M0*#
390 22 ×30 250 440 340 3.17 1.61 B43601A2397M0*#
470 22 ×35 200 360 280 3.60 1.84 B43601A2477M0*#
470 25 ×25 200 360 280 3.43 1.75 B43601B2477M0*#
560 22 ×35 170 300 240 3.93 2.00 B43601A2567M0*#
560 25 ×30 170 300 240 3.91 1.99 B43601B2567M0*#
680 22 ×40 140 250 190 4.47 2.28 B43601A2687M0*#
680 25 ×35 140 250 190 4.46 2.27 B43601B2687M0*#
680 30 ×25 140 250 190 4.12 2.10 B43601C2687M0*#
820 22 ×50 120 210 160 5.17 2.63 B43601A2827M0*#
820 25 ×40 120 210 160 5.06 2.58 B43601B2827M0*#
820 30 ×30 120 210 160 4.72 2.40 B43601C2827M0*#
1000 25 ×45 100 170 130 5.74 2.93 B43601A2108M0*#
1000 30 ×35 100 170 130 5.40 2.75 B43601B2108M0*#
1000 35 ×25 100 170 130 4.56 2.33 B43601C2108M0*#
1200 25 ×50 80 140 110 6.44 3.28 B43601A2128M0*#
1200 30 ×40 80 140 110 6.50 3.31 B43601B2128M0*#
1200 35 ×30 80 140 110 5.55 2.83 B43601C2128M0*#
1500 30 ×45 65 120 90 7.47 3.81 B43601A2158M0*#
1500 35 ×35 65 120 90 6.42 3.28 B43601B2158M0*#
1800 30 ×50 55 100 75 8.39 4.28 B43601A2188M0*#
1800 35 ×40 55 100 75 7.26 3.70 B43601B2188M0*#
2200 35 ×45 45 80 60 8.26 4.21 B43601A2228M0*#
2700 35 ×55 35 65 50 9.60 4.89 B43601A2278M0*#
VR= 250 V DC
270 22 ×25 330 590 460 2.68 1.37 B43601E2277M0*#
330 22 ×30 270 480 370 3.09 1.57 B43601E2337M0*#
330 25 ×25 270 480 370 3.04 1.55 B43601F2337M0*#
390 22 ×35 230 410 320 3.48 1.77 B43601E2397M0*#
390 25 ×30 230 410 320 3.44 1.75 B43601F2397M0*#
470 22 ×40 190 340 260 3.94 2.01 B43601E2477M0*#
470 25 ×30 190 340 260 3.78 1.93 B43601F2477M0*#
B43601
Long useful life and ultra compact 85 °C
Page 9 of 20Please read Cautions and warnings and
Important notes at the end of this document.
Technical data and ordering codes
CR
100 Hz
20 °C
µF
Case
dimensions
d×l
mm
ESRtyp
100 Hz
20 °C
mΩ
ESRmax
100 Hz
20 °C
mΩ
Zmax
10 kHz
20 °C
mΩ
IAC,max
100 Hz
60 °C
A
IAC,R
100 Hz
85 °C
A
Ordering code
(composition see
below)
Composition of ordering code
* = Insulation feature # = Terminal style
0 = PVC insulation
6 = PET insulation
8 = PVC insulation with additional PET insulation
cap on terminal side
0 = snap-in standard terminals (6.3 mm)
2 = snap-in 3 terminals (4.5 mm)
7 = snap-in short terminals (4.5 mm)
VR= 250 V DC
560 22 ×45 160 290 220 4.42 2.25 B43601E2567M0*#
560 25 ×35 160 290 220 4.28 2.18 B43601F2567M0*#
560 30 ×25 160 290 220 3.91 1.99 B43601G2567M0*#
680 22 ×50 130 240 180 4.99 2.54 B43601E2687M0*#
680 25 ×40 130 240 180 4.86 2.48 B43601F2687M0*#
680 30 ×30 130 240 180 4.49 2.29 B43601G2687M0*#
680 35 ×25 130 240 180 3.88 1.98 B43601H2687M0*#
820 25 ×45 110 200 150 5.49 2.80 B43601E2827M0*#
820 30 ×35 110 200 150 5.11 2.61 B43601F2827M0*#
820 35 ×30 110 200 150 4.73 2.41 B43601G2827M0*#
1000 25 ×55 90 160 130 6.35 3.24 B43601E2108M0*#
1000 30 ×40 90 160 130 6.21 3.16 B43601F2108M0*#
1000 35 ×30 90 160 130 5.23 2.66 B43601G2108M0*#
1200 30 ×45 75 140 110 6.99 3.56 B43601E2128M0*#
1200 35 ×35 75 140 110 5.93 3.02 B43601F2128M0*#
1500 30 ×55 60 110 85 8.20 4.18 B43601E2158M0*#
1500 35 ×40 60 110 85 6.84 3.49 B43601F2158M0*#
1800 35 ×45 50 90 70 7.71 3.93 B43601E2188M0*#
2200 35 ×55 40 75 60 8.94 4.56 B43601E2228M0*#
VR= 400 V DC
100 22 ×25 1090 1900 1470 1.68 0.86 B43601A9107M0*#
120 22 ×30 900 1590 1220 1.92 0.98 B43601A9127M0*#
150 22 ×30 720 1270 980 2.15 1.09 B43601A9157M0*#
150 25 ×25 720 1270 980 2.15 1.10 B43601B9157M0*#
180 22 ×35 600 1060 820 2.44 1.24 B43601A9187M0*#
180 25 ×30 600 1060 820 2.46 1.25 B43601B9187M0*#
220 22 ×40 490 870 670 2.78 1.42 B43601A9227M0*#
220 25 ×35 490 870 670 2.82 1.44 B43601B9227M0*#
220 30 ×25 490 870 670 2.69 1.37 B43601C9227M0*#
270 22 ×45 400 710 550 3.17 1.61 B43601A9277M0*#
270 25 ×40 400 710 550 3.22 1.64 B43601B9277M0*#
270 30 ×30 400 710 550 3.11 1.58 B43601C9277M0*#
B43601
Long useful life and ultra compact 85 °C
Page 10 of 20Please read Cautions and warnings and
Important notes at the end of this document.
Technical data and ordering codes
CR
100 Hz
20 °C
µF
Case
dimensions
d×l
mm
ESRtyp
100 Hz
20 °C
mΩ
ESRmax
100 Hz
20 °C
mΩ
Zmax
10 kHz
20 °C
mΩ
IAC,max
100 Hz
60 °C
A
IAC,R
100 Hz
85 °C
A
Ordering code
(composition see
below)
Composition of ordering code
* = Insulation feature # = Terminal style
0 = PVC insulation
6 = PET insulation
8 = PVC insulation with additional PET insulation
cap on terminal side
0 = snap-in standard terminals (6.3 mm)
2 = snap-in 3 terminals (4.5 mm)
7 = snap-in short terminals (4.5 mm)
VR= 400 V DC
330 25 ×45 330 580 450 3.66 1.87 B43601A9337M0*#
330 30 ×35 330 580 450 3.56 1.81 B43601B9337M0*#
330 35 ×25 330 580 450 3.19 1.63 B43601C9337M0*#
390 25 ×50 280 490 380 4.08 2.08 B43601A9397M0*#
390 30 ×35 280 490 380 3.87 1.97 B43601B9397M0*#
390 35 ×30 280 490 380 3.85 1.96 B43601C9397M0*#
470 25 ×55 230 410 320 4.58 2.33 B43601A9477M0*#
470 30 ×40 230 410 320 4.67 2.38 B43601B9477M0*#
470 35 ×35 230 410 320 4.38 2.23 B43601C9477M0*#
560 30 ×45 190 340 270 5.25 2.67 B43601A9567M0*#
560 35 ×35 190 340 270 4.78 2.44 B43601B9567M0*#
680 30 ×55 160 280 220 6.06 3.09 B43601A9687M0*#
680 35 ×40 160 280 220 5.44 2.77 B43601B9687M0*#
820 35 ×50 130 240 180 6.30 3.21 B43601A9827M0*#
1000 35 ×55 110 190 150 7.11 3.63 B43601A9108M0*#
VR= 450 V DC
82 22 ×25 1320 2320 1860 1.58 0.80 B43601A5826M0*#
100 22 ×30 1090 1900 1520 1.82 0.92 B43601A5107M0*#
120 22 ×30 900 1590 1270 1.99 1.01 B43601A5127M0*#
120 25 ×25 900 1590 1270 1.99 1.01 B43601B5127M0*#
150 22 ×35 720 1270 1020 2.31 1.17 B43601A5157M0*#
150 25 ×30 720 1270 1020 2.32 1.18 B43601B5157M0*#
180 22 ×40 600 1060 850 2.61 1.33 B43601A5187M0*#
180 25 ×35 600 1060 850 2.63 1.34 B43601B5187M0*#
180 30 ×25 600 1060 850 2.61 1.33 B43601C5187M0*#
220 22 ×50 490 870 700 3.03 1.54 B43601A5227M0*#
220 25 ×40 490 870 700 3.00 1.53 B43601B5227M0*#
220 30 ×30 490 870 700 3.01 1.53 B43601C5227M0*#
220 35 ×25 490 870 700 2.83 1.44 B43601D5227M0*#
270 25 ×45 400 710 570 3.42 1.74 B43601A5277M0*#
270 30 ×35 400 710 570 3.46 1.76 B43601B5277M0*#
270 35 ×30 400 710 570 3.48 1.77 B43601C5277M0*#
B43601
Long useful life and ultra compact 85 °C
Page 11 of 20Please read Cautions and warnings and
Important notes at the end of this document.
Technical data and ordering codes
CR
100 Hz
20 °C
µF
Case
dimensions
d×l
mm
ESRtyp
100 Hz
20 °C
mΩ
ESRmax
100 Hz
20 °C
mΩ
Zmax
10 kHz
20 °C
mΩ
IAC,max
100 Hz
60 °C
A
IAC,R
100 Hz
85 °C
A
Ordering code
(composition see
below)
Composition of ordering code
* = Insulation feature # = Terminal style
0 = PVC insulation
6 = PET insulation
8 = PVC insulation with additional PET insulation
cap on terminal side
0 = snap-in standard terminals (6.3 mm)
2 = snap-in 3 terminals (4.5 mm)
7 = snap-in short terminals (4.5 mm)
VR= 450 V DC
330 25 ×50 330 580 470 3.88 1.98 B43601A5337M0*#
330 30 ×40 330 580 470 4.20 2.14 B43601B5337M0*#
330 35 ×30 330 580 470 3.85 1.96 B43601C5337M0*#
390 30 ×45 280 490 390 4.70 2.39 B43601A5397M0*#
390 35 ×35 280 490 390 4.33 2.21 B43601B5397M0*#
470 30 ×50 230 410 330 5.29 2.70 B43601A5477M0*#
470 35 ×40 230 410 330 4.91 2.50 B43601B5477M0*#
560 30 ×55 190 340 280 5.91 3.01 B43601A5567M0*#
560 35 ×45 190 340 280 5.51 2.81 B43601B5567M0*#
680 35 ×50 160 280 230 6.22 3.17 B43601A5687M0*#
B43601
Long useful life and ultra compact 85 °C
Page 12 of 20Please read Cautions and warnings and
Important notes at the end of this document.
1) Refer to chapter "General technical information, 5.3 Calculation of useful life" for an explanation on how to interpret the useful life
graphs.
Useful life
depending on ambient temperature TAunder ripple current operating conditions1)
Voltage derating (0.93 VR) enables 105 °C operation
Frequency factor of permissible ripple
current IAC versus frequency f
Frequency characteristics of ESR
Typical behavior
B43601
Long useful life and ultra compact 85 °C
Page 13 of 20Please read Cautions and warnings and
Important notes at the end of this document.
Impedance Z versus frequency f
Typical behavior at 20 °C
B43601
Long useful life and ultra compact 85 °C
Page 14 of 20Please read Cautions and warnings and
Important notes at the end of this document.
Cautions and warnings
Personal safety
The electrolytes used by EPCOS have not only been optimized with a view to the intended
application, but also with regard to health and environmental compatibility. They do not contain
any solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide
(DMAC).
Furthermore, part of the high-voltage electrolytes used by EPCOS are self-extinguishing. They
contain flame-retarding substances which will quickly extinguish any flame that may have been
ignited.
As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce
operating electrolytes. However, in exceptional cases, such materials must be used in order to
achieve specific physical and electrical properties because no safe substitute materials are
currently known. However, the amount of dangerous materials used in our products has been
limited to an absolute minimum. Nevertheless, the following rules should be observed when
handling Al electrolytic capacitors:
Any escaping electrolyte should not come into contact with eyes or skin.
If electrolyte does come into contact with the skin, wash the affected parts immediately with
running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If
symptoms persist, seek medical treatment.
Avoid breathing in electrolyte vapor or mists. Workplaces and other affected areas should be
well ventilated. Clothing that has been contaminated by electrolyte must be changed and
rinsed in water.
B43601
Long useful life and ultra compact 85 °C
Page 15 of 20Please read Cautions and warnings and
Important notes at the end of this document.
Product safety
The table below summarize the safety instructions that must be observed without fail. A detailed
description can be found in the relevant sections of chapter "General technical information".
Topic Safety information Reference
Chapter "General
technical information"
Polarity Make sure that polar capacitors are connected
with the right polarity.
1
"Basic construction of
aluminum electrolytic
capacitors"
Reverse voltage Voltages polarity classes should be prevented by
connecting a diode.
3.1.6
"Reverse voltage"
Upper category
temperature
Do not exceed the upper category temperatur. 7.2
"Maximum permissible
operating temperature"
Maintenance Make periodic inspections of the capacitors.
Before the inspection, make sure that the power
supply is turned off and carefully discharge the
electricity of the capacitors.
Do not apply any mechanical stress to the
capacitor terminals.
10
"Maintenance"
Mounting
position of screw
terminal capacitors
Do not mount the capacitor with the terminals
(safety vent) upside down.
11.1
"Mounting positions of
capacitors with screw
terminals"
Mounting of
single-ended
capacitors
The internal structure of single-ended capacitors
might be damaged if excessive force is applied to
the lead wires.
Avoid any compressive, tensile or flexural stress.
Do not move the capacitor after soldering to PC
board.
Do not pick up the PC board by the soldered
capacitor.
Do not insert the capacitor on the PC board with a
hole space different to the lead space specified.
11.4
"Mounting
considerations for
single-ended capacitors"
Robustness of
terminals
The following maximum tightening torques must
not be exceeded when connecting screw
terminals:
M5: 2 Nm
M6: 2.5 Nm
11.3
"Mounting torques"
Soldering Do not exceed the specified time or temperature
limits during soldering.
11.5
"Soldering"
B43601
Long useful life and ultra compact 85 °C
Page 16 of 20Please read Cautions and warnings and
Important notes at the end of this document.
Topic Safety information Reference
Chapter "General
technical information"
Soldering,
cleaning agents
Do not allow halogenated hydrocarbons to come
into contact with aluminum electrolytic capacitors.
11.6
"Cleaning agents"
Passive
flammability
Avoid external energy, such as fire or electricity. 8.1
"Passive flammability"
Active
flammability
Avoid overload of the capacitors. 8.2
"Active flammability"
Reference
Chapter "Capacitors
with screw terminals"
Breakdown strength
of insulating
sleeves
Do not damage the insulating sleeve, especially
when ring clips are used for mounting.
"Screw terminals -
accessories"
B43601
Long useful life and ultra compact 85 °C
Page 17 of 20Please read Cautions and warnings and
Important notes at the end of this document.
Symbols and terms
Symbol English German
C Capacitance Kapazität
CRRated capacitance Nennkapazität
CSSeries capacitance Serienkapazität
CS,T Series capacitance at temperature T Serienkapazität bei Temperatur T
CfCapacitance at frequency f Kapazität bei Frequenz f
d Case diameter, nominal dimension Gehäusedurchmesser, Nennmaß
dmax Maximum case diameter Maximaler Gehäusedurchmesser
ESL Self-inductance Eigeninduktivität
ESR Equivalent series resistance Ersatzserienwiderstand
ESRfEquivalent series resistance at
frequency f
Ersatzserienwiderstand bei Frequenz f
ESRTEquivalent series resistance at
temperature T
Ersatzserienwiderstand bei Temperatur T
f Frequency Frequenz
I Current Strom
IAC Alternating current (ripple current) Wechselstrom
IAC,rms Root-mean-square value of alternating
current
Wechselstrom, Effektivwert
IAC,f Ripple current at frequency f Wechselstrom bei Frequenz f
IAC,max Maximum permissible ripple current Maximal zulässiger Wechselstrom
IAC,R Rated ripple current Nennwechselstrom
IAC,R (B) Rated ripple current for base cooling Nennwechselstromstrom für Bodenkühlung
Ileak Leakage current Ableitstrom
Ileak,op Operating leakage current Ableitstrom bei Betrieb
l Case length, nominal dimension Gehäuselänge, Nennmaß
lmax Maximum case length (without
terminals and mounting stud)
Maximale Gehäuselänge (ohne Anschlüsse
und Gewindebolzen)
R Resistance Widerstand
Rins Insulation resistance Isolationswiderstand
Rsymm Balancing resistance Symmetrierwiderstand
T Temperature Temperatur
∆T Temperature difference Temperaturdifferenz
TAAmbient temperature Umgebungstemperatur
TCCase temperature Gehäusetemperatur
TBCapacitor base temperature Temperatur des Becherbodens
t Time Zeit
∆t Period Zeitraum
tbService life (operating hours) Brauchbarkeitsdauer (Betriebszeit)
B43601
Long useful life and ultra compact 85 °C
Page 18 of 20Please read Cautions and warnings and
Important notes at the end of this document.
Symbol English German
V Voltage Spannung
VFForming voltage Formierspannung
Vop Operating voltage Betriebsspannung
VRRated voltage, DC voltage Nennspannung, Gleichspannung
VSSurge voltage Spitzenspannung
XCCapacitive reactance Kapazitiver Blindwiderstand
XLInductive reactance Induktiver Blindwiderstand
Z Impedance Scheinwiderstand
ZTImpedance at temperature T Scheinwiderstand bei Temperatur T
tan δDissipation factor Verlustfaktor
λFailure rate Ausfallrate
ε0Absolute permittivity Elektrische Feldkonstante
εrRelative permittivity Dielektrizitätszahl
ωAngular velocity; 2 πf Kreisfrequenz; 2 πf
Notes
All dimensions are given in mm.
B43601
Long useful life and ultra compact 85 °C
Page 19 of 20Please read Cautions and warnings and
Important notes at the end of this document.
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical re-
quirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incum-
bent on the customer to check and decide whether an EPCOS product with the properties de-
scribed in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Ma-
terial Data Sheets on the Internet (www.epcos.com/material). Should you have any more de-
tailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available. The
aforementioned does not apply in the case of individual agreements deviating from the fore-
going for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-
sion of the "General Terms of Delivery for Products and Services in the Electrical In-
dustry" published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSSP, CTVS, DSSP, MiniBlue, MKK,
MLSC, MotorCap, PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap,
SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks
registered or pending in Europe and in other countries. Further information will be found on
the Internet at www.epcos.com/trademarks.
Important notes
Page 20 of 20
