OPT-1250xxxx Series RoHS Compliant 1X9 SC Duplex Receptacle Transceiver Module for Gigabit Ethernet Features Industry Standard 1 x 9 Footprint and duplex SC Connector interface Compliant with Specifications for IEEE 802.3z/ Gigabit Ethernet OPT-1250Bxxx compliant with the 1.0625GBd Fiber Channel 100-SM-LC-L FC-PI Rev.13 OPT-1250Axxx compliant with the 1.0625GBd Fiber Channel FC-PI 100-M5-SN-I Rev.13 Single +3.3V or 5V Power Supply PECL or TTL Receiver Signal Detect Indicator Wave Solderable and Aqueous Washable Laser Class 1 Product which comply with the requirements of IEC 60825-1 and IEC 60825-2 RoHS Compliant per Directive 2002/95/EC. Description Applications The OPT-1250xxxx series from DELTA is a 1X9 transceiver module designed expressly for high-speed communication applications that require rates of up to 1.25Gbit/sec. It is compliant with the Gigabit Ethernet standards as well as 1x Fiber channel standards. Gigabit Ethernet/Fast Ethernet Switched backplane applications Performance OPT-1250AxFxx: The OPT-1250xxxx transceivers are provided with the SC receptacle that is compatible with the industry standard SC connector. 850nm VCSEL, up to 500m in 50/125m MMF 850nm VCSEL, up to 220m in 62.5/125m MMF The post-amplifier of the OPT-1250xxxx also includes a Signal Detect circuit that provides a PECL or TTL logic-Low output when an unusable optical signal level is detected. (see order information) OPT-1250BxQxx: 1310nm FP laser, Data Link up to 10km in 9/125um SMF 1310nm FP laser, up to 550m in 50/125m MMF The OPT-1250xxxx transceiver is a Class 1 eye safety product. The optical power levels, under normal operation, are at eye safe level. 1310nm FP laser, up to 550m in 62.5/125m MMF 1 DELTA ELECTRONICS, INC. Jan., 2008 Rev. 0H www.deltaww.com OPT-1250xxxx Series Absolute Maximum Ratings Parameter Storage Temperature Lead Soldering Temperature Lead Soldering Time Supply Voltage Symbol Ts TSOLD tSOLD VCC Min. -40 Typ. Max. 85 260 10 6 Unit C C sec. V Note Typ. Max. 70 Unit C Note 1 5.25 3.465 V 0 Recommended Operating Conditions Parameter Ambient Operating Temperature Supply Voltage OPT-1250x1xx OPT-1250x2xx, OPT-1250x4xx Symbol TA Min. 0 VCC 4.75 3.135 Note: 1.See ordering information for detail Electrical Characteristics (At recommended ambient operating temperature, TA and supply voltage, VCC) Parameter Total Supply Current Transmitter Transmitter Data Input Voltage-Low Transmitter Data Input Voltage-High Transmitter Differential Input Voltage Receiver Data Output Voltage-Low Data Output Voltage-High Receiver Differential Output Voltage Output Data Rise/Fall Time PECL SD Output LOW level output voltage HIGH level output voltage TTL SD Output LOW level output voltage HIGH level output voltage Symbol ICCT Min. VIL-VCC VIH-VCC VDT Typ. Max. 310 Unit mA Note -1.810 -1.165 0.3 -1.475 -0.880 1.6 V V V 1 1 2 VOL-VCC VOH-VCC VDR tr/tf -1.95 -1.045 0.5 -1.62 -0.74 1.2 0.4 V V V ns 1 1 2 3 VSDL-VCC VSDH-VCC -1.84 -1.1 -1.60 -0.9 V 4 VSDL VSDH 0 2 0.8 VCC V 5 0.7 Notes: 1. For OPT-1250A1F1x, OPT-1250A4F1x, OPT-1250B2Q1x and OPT-1250B1Q1x. 2. For OPT-1250A2F2x and OPT-1250B4Q2x. 3. These are 20%~80% values 4. For OPT-1250A1F1x, OPT-1250A2F2x, OPT-1250B1Q1x and OPT-1250B2Q1x 5. For OPT-1250A4F1x and OPT-1250B4Q2x 2 DELTA ELECTRONICS, INC. Jan., 2008 Rev. 0H www.deltaww.com OPT-1250xxxx Series Single Mode Transceiver (OPT-1250B1Q1x, OPT-1250B2Q1x, OPT-1250B4Q2x) (At recommended ambient operating temperature, TA and supply voltage, VCC; Data Rate=1.25Gb/sec, PRBS=27-1 NRZ, 9/125um SMF) Parameter Symbol Min. PO -12 -9.5 9 1270 Typ. Max. Unit -3 -3 dBm Note Transmitter Output Optical Power (Avg.) OPT-1250BxIx OPT-1250BxQx Optical Extinction Ratio Center Wavelength Spectral Width (RMS) Optical Rise/Fall time Relative Intensity Noise Output Eye ER dB C 1310 1355 nm 4.5 nm 0.4 ns 1 tr/tf RIN -120 dB/Hz Complies with the IEEE 802.3z/D2 specification, and is class 1 laser eye safety Receiver Sensitivity (Avg.) Input Optical Wavelength Optical Rise/Fall Time Signal Detect-Asserted (Avg.) Signal Detect-De-asserted (Avg.) Signal Detect-Hysteresis Receiver Saturation Power PIN tr/tf PA PD PA-PD PSAT -19 1310 0.5 -19 -35 0.5 -3 dBm nm ns dBm dBm dB dBm 2 1 Notes: 1. These are unfiltered 20%~80% values 2. The sensitivity is provided at a BER of 1x10-10 or better with an input signal consisting of 7 1250Mb/s, 2 -1 PRBS and ER=9dB. Mask of the eye diagram for the optical transmit signal 3 DELTA ELECTRONICS, INC. Jan., 2008 Rev. 0H www.deltaww.com OPT-1250xxxx Series Multi-Mode Series Transceiver (OPT-1250A1F1x, OPT-1250A2F2x, OPT-1250A4F1x) (At recommended ambient operating temperature, TA and supply voltage, VCC; Data Rate=1.25Gb/sec, PRBS=27-1 NRZ, 62.5/125um MMF) Parameter Symbol Min. Typ. Max. Unit Note Transmitter Output Optical Power (Avg.) Optical Extinction Ratio Center Wavelength Spectral Width (RMS) Optical Rise/Fall time Relative Intensity Noise Output Eye PO -9.5 -4 dBm ER 9 dB C 830 850 860 nm 0.85 nm 0.26 ns 1 tr/tf RIN -117 dB/Hz Complies with the IEEE 802.3z/D2 specification, and is class 1 laser eye safety Receiver Sensitivity (Avg.) Input Optical Wavelength Optical Rise/Fall time Signal Detect-Asserted (Avg.) Signal Detect-De-asserted (Avg.) Signal Detect-Hysteresis Receiver saturation power PIN tr/tf PA PD PA-PD PSAT -17 850 0.36 -17 -30 0.5 -4 dBm nm ns dBm dBm dB dBm 2 1 Notes: 1. These are 20%~80% values 2. The sensitivity is provided at a BER of 1x10-10 or better with an input signal consisting of 7 1250Mb/s, 2 -1 PRBS and ER=9dB. Mask of the eye diagram for the optical transmit signal 4 DELTA ELECTRONICS, INC. Jan., 2008 Rev. 0H www.deltaww.com OPT-1250xxxx Series Pin Definition PIN 1 2 3 4 5 6 7 8 9 Symbol GND RD (+) RD (-) SD VccR VccT TD (-) TD (+) GND Functional description Receiver Signal Ground Receiver Data Out Non-inverted (LVPECL) Receiver Data Out Inverted (LVPECL) Receiver Signal Detect (LVPECL or TTL) Receiver Power Supply, Transmitter Power Supply Transmitter Data In Inverted (LVPECL) Transmitter Data In Non-inverted (LVPECL) Transmitter Signal Ground Pin Descriptions Pin 1 Receiver Signal Ground, GND Directly connect these pins to the ground plane. Pin 2 Receiver Data Out Non-inverted (LVPECL), RD (+) Receiver Data output Non-inverted (LVPECL), RD (+). Pin 3 Receiver Data Out Inverted (LVPECL), RD (-) Receiver Data output Inverted (LVPECL), RD (-). Pin 4 Receiver Signal Detect (LVPECL/TTL), SD PECL/TTL logic family. Normal Operation: Logic "1" Output Fault Condition: Logic "0" Output. Pin 5 Receiver Power Supply, VccR Provide +3.3/5V dc power supply. Pin 6 Transmitter Power Supply, VccT Provide +3.3/5V dc power supply. Pin 7 Transmitter Data In Inverted (LVPECL), TD (-) Transmitter Data Input Inverted (LVPECL), TD (-) Pin 8 Transmitter Data In Non-inverted (LVPECL), TD (+) Transmitter Data Input Non-inverted (LVPECL), TD (+) Pin 9 Transmitter Signal Ground, GND Directly connect these pins to the ground plane. 5 DELTA ELECTRONICS, INC. Jan., 2008 Rev. 0H www.deltaww.com OPT-1250xxxx Series Recommend Circuit Schematic for Internal DC Coupled Transceivers R1=R3=82 ohm (3.3V),68 ohm(5V) R2=R4=130 ohm (3.3V),191 ohm (5V) R5=R6=150 ohm (3.3V),270 ohm (5V) R7=130 ohm (3.3V PECL),82 ohm(5V),NC (TTL) R8=82 ohm (3.3V PECL),130 ohm(5V),NC (TTL) C1=C2=C3=C4=C5=C6=C7=100 nF C8=C9=10uF L1=L2=1uH 6 DELTA ELECTRONICS, INC. Jan., 2008 Rev. 0H www.deltaww.com OPT-1250xxxx Series Recommend Circuit Schematic for Internal AC Coupled Transceivers R1=130 ohm (3.3V PECL),82 ohm(5V),NC (TTL) R2=82 ohm (3.3V PECL),130 ohm(5V),NC (TTL) C1=C2=C3= 100 nF C4=C5=10uF L1=L2=1uH 7 DELTA ELECTRONICS, INC. Jan., 2008 Rev. 0H www.deltaww.com OPT-1250xxxx Series Package Outline Drawing (without shielding) Package Outline Drawing (A type shielding) Class 1 Laser Product 8 DELTA ELECTRONICS, INC. Jan., 2008 Rev. 0H www.deltaww.com OPT-1250xxxx Series Package Outline Drawing (B type shielding) Package Outline Drawing (C type shielding) 9 DELTA ELECTRONICS, INC. Jan., 2008 Rev. 0H www.deltaww.com OPT-1250xxxx Series Regulatory Compliance Feature Electromagnetic Interference (EMI) Reference Performance FCC Class B EN 55022 Class B (CISPR 22A) Radio Frequency Electromagnetic Field EN 61000-4-3 (1) Satisfied with electrical characteristics of product spec. IEC 1000-4-3 Electrostatic Discharge to the Duplex LC Receptacle EN 61000-4-2 (2) No physical damage IEC 1000-4-2 IEC 801.2 Electrostatic Discharge to the Electrical Pins MIL-STD-883E Method 3015.7 Eye Safety US FDA CDRH AEL Class 1 CDRH File # 0321539-00 EN 60950: 2000 EN 60825-1: 1994+A11+A2 EN 60825-2: 2000 TUV Certificate No. R50032471 Component Recognition Underwriters Laboratories and UL File # E239394 Canadian Standards Association Joint Component Recognition for Information Technology Equipment Including Electrical Business Equipment 10 DELTA ELECTRONICS, INC. Jan., 2008 Rev. 0H www.deltaww.com OPT-1250xxxx Series Ordering Information OPT- 1250X1X2X3X4X5X6X7 X1: Fiber X5: A: Multi-mode 850nm B: Single-mode 1310nm RoHS Compliant Blank: Non-RoHS Compliant R: RoHS Compliant X2: Power Supply Voltage and SD Level X6: 1: 5.0V, PECL SD Level 2: 3.3V, PECL SD Level 4: 3.3V, TTL SD Level Shielding Type & Revision Code A: New design B: B type shielding C: C type shielding D: A type shielding X7: Temperature X3: Distance F: 500m, 50/125m MMF Q: 10km, 9/125m SMF Blank: 0 to +70 degree C H: -10 to + 85 degree C T: -40 to + 85 degree C X4: Data Coupling 1: 1x9 SC DC/DC 2: 1x9 SC AC/AC Appendix ADocument Revision Version No. 0G 0H Date 2006-09 2008-01 Description Release Correct "Total Supply Current" "TTL SD Output" "PECL SD Output" Recommend Circuit SchematicOptical Rise/Fall time Spectral Width (RMS) Pin Definition Package Outline Order Information 11 DELTA ELECTRONICS, INC. Jan., 2008 Rev. 0H www.deltaww.com