NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RV0019C DOC
Solid State Devices, Inc.
14701 Firestone Blvd * La Mira da, Ca 90638
Phone: (562) 404-7855 * Fax: (562) 404-1773
ssdi@ssdi-power.com * www.ssdi-power.com
Designer’s Data Sheet
Part Number / Ordering Information 1
/
SAM __ __
_
_
│
│
│
│
│
│
│
└
│
│
│
│
└
└ Screening 2
/
= None
TX = TX Level
TXV = TXV Level
S = S Level
Package
___ = Axial Leaded
SMS = Surface Mount Square Tab
V
oltage
15 = 1500
20 = 2000
25 = 2500
30 = 3000
35 = 3500
40 = 4000
SAM15 – SAM40
and
SAM15SMS – SAM40SMS
2 Amp
1500 ─ 4000 VOLTS
5 µsec
HIGH VOLTAGE
RECTIFIER
FEATURES:
Standard Recovery: 5 µsec Maximum
PIV to 4000 Volts
Hermetically Sealed
Void-Free Construction
Metallurgically Bonded
175°C Maximum Operating Temperature
TX, TXV, and Space Level Screening Available 2/
ELECTRICAL CHARACTERISTICS (at 25°C unless otherwise specified)
Part
Number
Peak
Inverse
Voltage
Average
Rectifier
Current
Maximum
Reverse Current
Maximum
Forward
Voltage
Maximum
Surge
Current
(1 Cycle)
Maximum
Reverse
Recovery
Time
Maximum
Junction
Capacitance
Typical
Thermal
Resistance
Symbol PIV IO I
R VF I
FSM t
RR C
J R
θJL / RθJE
Units V A A μA V A μs pF °C/W
Conditions 25°C 100°C
@ PIV
25°C
@ PIV
100°C @ IO
IF= .5 A
IR= 1 A
IR
R
= .25 A
VR= 100 V
fT= 1 MHZ
RθJL: L=3/8”
RθJE: L=0”
SAM15 1500 2 1.5 1.0 25 5.5 60 5 15 12
SAM20 2000 2 1.5 1.0 25 5.5 60 5 15 12
SAM25 2500 2 1.5 1.0 25 5.5 60 5 15 12
SAM30 3000 2 1.5 1.0 25 5.5 60 5 15 12
SAM35 3500 2 1.5 1.0 25 5.5 60 5 15 12
SAM40 4000 2 1.5 1.0 25 5.5 60 5 15 12
SAM15SMS 1500 2 1.7 1.0 25 5.5 60 5 15 6
SAM20SMS 2000 2 1.7 1.0 25 5.5 60 5 15 6
SAM25SMS 2500 2 1.7 1.0 25 5.5 60 5 15 6
SAM30SMS 3000 2 1.7 1.0 25 5.5 60 5 15 6
SAM35SMS 3500 2 1.7 1.0 25 5.5 60 5 15 6
SAM40SMS 4000 2 1.7 1.0 25 5.5 60 5 15 6
1/ For Ordering Information, Price, Operating Curves and Availability – Contact
Factory.
2/ Screening based on MIL-PRF-19500. Screening flows available on request.
3/ Operating and testing over 10,000 V/inch may require encapsulation or immersion
in a suitable dielectric material.
4/ Max. forward voltage measured with instantaneous forward pulse of 300µsec
minimum.
5/ Max. end tab temp. for soldering is 250°C for 5 sec maximum.
6/ Operating and storage temperature: -65°C to +175°C.
Axial
SMS
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RV0019C DOC
PACKAGE OUTLINE: Axial
DIMENSIONS
DIM MIN MAX
A --- .300”
B --- .320”
C .055” .063”
D .400” ---
PACKAGE OUTLINE: Surface Mount Square Tab
Dimensions prior to solder dipping
DIMENSIONS
DIM MIN MAX
A .195” .205”
B .330” .410”
C .020” .035”
D .002” ---
Solid State Devices, Inc.
14701 Firestone Blvd * La Mira da, Ca 90638
Phone: (562) 404-7855 * Fax: (562) 404-1773
ssdi@ssdi-power.com * www.ssdi-power.com
SAM15 – SAM40
and
SAM15SMS – SAM40SMS
