19-0344; Rev 6; 12/05 3-Pin Microprocessor Reset Circuits The MAX803/MAX809/MAX810 are microprocessor (P) supervisory circuits used to monitor the power supplies in P and digital systems. They provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with +5V, +3.3V, +3.0V, or +2.5V powered circuits. These circuits perform a single function: they assert a reset signal whenever the VCC supply voltage declines below a preset threshold, keeping it asserted for at least 140ms after VCC has risen above the reset threshold. Reset thresholds suitable for operation with a variety of supply voltages are available. The MAX803 has an open-drain output stage, while the MAX809/MAX810 have push-pull outputs. The MAX803's open-drain RESET output requires a pull-up resistor that can be connected to a voltage higher than VCC. The MAX803/MAX809 have an active-low RESET output, while the MAX810 has an active-high RESET output. The reset comparator is designed to ignore fast transients on VCC, and the outputs are guaranteed to be in the correct logic state for VCC down to 1V. Low supply current makes the MAX803/MAX809/ MAX810 ideal for use in portable equipment. The MAX803 is available in a 3-pin SC70 package, and the MAX809/MAX810 are available in 3-pin SC70 or SOT23 packages. Applications Computers Controllers Intelligent Instruments Critical P and C Power Monitoring Portable/Battery-Powered Equipment Automotive ____________________________Features Precision Monitoring of +2.5V, +3V, +3.3V, and +5V Power-Supply Voltages Fully Specified Over Temperature Available in Three Output Configurations Open-Drain RESET Output (MAX803) Push-Pull RESET Output (MAX809) Push-Pull RESET Output (MAX810) 140ms min Power-On Reset Pulse Width 12A Supply Current Guaranteed Reset Valid to VCC = +1V Power Supply Transient Immunity No External Components 3-Pin SC70 and SOT23 Packages Ordering Information PART TEMP. RANGE PIN-PACKAGE MAX803_EXR-T MAX803_EXR-T10 MAX809_EXR-T MAX809_EXR-T10 MAX809_EUR-T MAX809_EUR-T10 MAX810_EXR-T MAX810_EXR-T10 MAX810_EUR-T MAX810_EUR-T10 -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +105C -40C to +105C -40C to +125C -40C to +125C -40C to +105C -40C to +105C 3 SC70-3 3 SC70-3 3 SC70-3 3 SC70-3 3 SOT23-3 3 SOT23-3 3 SC70-3 3 SC70-3 3 SOT23-3 3 SOT23-3 Note: These parts are offered in 2.5k or 10k reels, and must be ordered in 2.5k or 10k increments. Order MAX803_EXR-T for 2.5k reels and MAX803_EXR-T10 for 10k reels. Insert the desired suffix letter from the Selector Guide into the blank to complete the part number. All versions of these products may not be available at the time of announcement. Contact factory for availability. Devices are available in both leaded and lead-free packaging. Specify lead-free by replacing "-T" with "+T" when ordering. Typical Operating Circuit Pin Configuration TOP VIEW VCC VCC VCC GND 1 RPULL-UP* P MAX803 MAX809 RESET GND MAX803 MAX809 MAX810 RESET INPUT GND 3 VCC RESET (RESET) 2 SC70-3/SOT23-3 *MAX803 ONLY ( ) ARE FOR MAX810. MAX803 AVAILABLE IN SC70-3 ONLY. ________________________________________________________________ Maxim Integrated Products For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com. 1 MAX803L/M/R/S/T/Z, MAX809J/L/M/R/S/T/Z, MAX810L/M/R/S/T/Z General Description MAX803L/M/R/S/T/Z, MAX809J/L/M/R/S/T/Z, MAX810L/M/R/S/T/Z 3-Pin Microprocessor Reset Circuits ABSOLUTE MAXIMUM RATINGS Terminal Voltage (with respect to GND) VCC ....................................................................-0.3V to +6.0V RESET, RESET (push-pull) .....................-0.3V to (VCC + 0.3V) RESET (open drain)...........................................-0.3V to +6.0V Input Current, VCC ..............................................................20mA Output Current, RESET, RESET ..........................................20mA Rate of Rise, VCC ............................................................100V/s Continuous Power Dissipation (TA = +70C) 3-Pin SC70 (derate 2.17mW/C above +70C) ............174mW 3-Pin SOT23 (derate 4mW/C above +70C)...............320mW Operating Temperature Range 3-Pin SC70 .....................................................-40C to +125C 3-Pin SOT23...................................................-40C to +105C Storage Temperature Range .............................-65C to +150C Lead Temperature (soldering, 10s) .................................+300C Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS (VCC = full range, TA = -40C to +105C (SOT23) or TA = -40C to +125C (SC70), unless otherwise noted. Typical values are at TA = +25C, VCC = 5V for L/M/J versions, VCC = 3.3V for T/S versions, VCC = 3V for R version, and VCC = 2.5V for Z version.) (Note 1) PARAMETER SYMBOL VCC Range CONDITIONS ICC ICC TA = -40C to +105C (MAX8_ _ _EUR) 1.2 5.5 TA = -40C to +125C (MAX8_ _ _EXR) 1.2 5.5 TA = +85C to +105C TA = +85C to +125C MAX8_ _L MAX8_ _M MAX809J (SOT only) Reset Threshold (SOT only) VTH MAX8_ _T MAX8_ _S MAX8_ _R 2 MAX 5.5 TA = -40C to +85C Supply Current (SC70) TYP 1.0 TA = -40C to +85C Supply Current (SOT23) MIN TA = 0C to +70C VCC < 5.5V, MAX8_ _L/M 24 VCC < 3.6V, MAX8_ _R/S/T/Z 17 50 100 VCC < 3.6V, MAX8_ _R/S/T/Z 100 VCC < 5.5V, MAX8_ _L/M 24 35 VCC < 3.6V, MAX8_ _R/S/T/Z 17 30 VCC < 5.5V, MAX8_ _L/M 60 VCC < 3.6V, MAX8_ _R/S/T/Z 60 4.56 TA = -40C to +85C 4.50 TA = -40C to +125C 4.40 TA = +25C 4.31 TA = -40C to +85C 4.25 TA = -40C to +125C 4.16 TA = +25C 3.93 TA = -40C to +85C 3.89 TA = -40C to +125C 3.80 TA = +25C 3.04 TA = -40C to +85C 3.00 TA = -40C to +125C 2.92 TA = +25C 2.89 4.63 V 60 VCC < 5.5V, MAX8_ _L/M TA = +25C UNITS A 4.70 4.75 4.86 4.38 4.45 4.50 4.56 4.00 4.06 4.10 4.20 3.08 3.11 3.15 3.23 2.93 2.96 TA = -40C to +85C 2.85 TA = -40C to +125C 2.78 3.00 TA = +25C 2.59 TA = -40C to +85C 2.55 2.70 TA = -40C to +125C 2.50 2.76 3.08 2.63 _______________________________________________________________________________________ 2.66 V 3-Pin Microprocessor Reset Circuits (VCC = full range, TA = -40C to +105C (SOT23) or TA = -40C to +125C (SC70), unless otherwise noted. Typical values are at TA = +25C, VCC = 5V for L/M/J versions, VCC = 3.3V for T/S versions, VCC = 3V for R version, and VCC = 2.5V for Z version.) (Note 1) PARAMETER SYMBOL CONDITIONS MAX8_ _L MAX8_ _M MAX8_ _T Reset Threshold (SC70 only) VTH MAX8_ _S MAX8_ _R MAX8_ _Z (SC70 only) MIN TYP MAX TA = +25C 4.56 4.63 4.70 TA = -40C to +85C 4.50 4.75 TA = -40C to +125C 4.44 4.82 TA = +25C 4.31 TA = -40C to +85C 4.25 4.50 TA = -40C to +125C 4.20 4.56 TA = +25C 3.04 TA = -40C to +85C 3.00 3.15 TA = -40C to +125C 2.95 3.21 TA = +25C 2.89 3.00 2.81 3.05 TA = +25C 2.59 TA = -40C to +85C 2.55 2.70 TA = -40C to +125C 2.52 2.74 TA = +25C 2.28 TA = -40C to +85C 2.25 2.38 TA = -40C to +125C 2.22 2.42 Reset Active Timeout Period (SOT23) TA = -40C to +85C 140 TA = +85C to +105C 100 Reset Active Timeout Period (SC70) TA = -40C to +85C 140 TA = +85C to +125C 100 RESET Output Voltage Low (pushpull active high, MAX810) VOH VOL 2.96 2.85 VCC = VTH to (VTH - 100 mV) RESET Output Voltage High (push-pull active low MAX809) 2.93 3.11 TA = -40C to +85C VCC to Reset Delay (Note 2) VOL 3.08 4.45 TA = -40C to +125C Reset Threshold Tempco RESET Output Voltage Low (pushpull active low and open-drain active low, MAX803 and MAX809) 4.38 2.63 2.32 2.35 30 ppm/C 20 s 240 560 840 240 460 840 0.3 VCC = VTH min, ISINK = 3.2mA, MAX803L/M, MAX809J/L/M 0.4 VCC > 1.0V, ISINK = 50A 0.3 0.8VCC VCC > VTH max, ISOURCE = 800A, MAX803L/M, MAX809J/L/M VCC - 1.5 V 2.66 VCC = VTH min, ISINK = 1.2mA, MAX803R/S/T/Z, MAX809R/S/T/Z VCC > VTH max, ISOURCE = 500A, MAX803R/S/T/Z, MAX809R/S/T/Z UNITS ms ms V V VCC = VTH max, ISINK = 1.2mA, MAX810R/S/T/Z 0.3 VCC = VTH max, ISINK = 3.2mA, MAX810L/M 0.4 V _______________________________________________________________________________________ 3 MAX803L/M/R/S/T/Z, MAX809J/L/M/R/S/T/Z, MAX810L/M/R/S/T/Z ELECTRICAL CHARACTERISTICS (continued) ELECTRICAL CHARACTERISTICS (continued) (VCC = full range, TA = -40C to +105C (SOT23) or TA = -40C to +125C (SC70), unless otherwise noted. Typical values are at TA = +25C, VCC = 5V for L/M/J versions, VCC = 3.3V for T/S versions, VCC = 3V for R version, and VCC = 2.5V for Z version.) (Note 1) PARAMETER SYMBOL RESET Output Voltage High (push-pull active high, MAX810) VOH CONDITIONS MIN 1.8V < VCC < VTH min, ISOURCE = 150A RESET Open-Drain Output Leakage Current (MAX803) (Note 3) TYP MAX UNITS 0.8VCC V VCC > VTH, RESET deasserted 1 A Note 1: Production testing done at TA = +25C; limits over temperature guaranteed by design only. Note 2: RESET output for MAX803/MAX809; RESET output for MAX810. Note 3: Guaranteed by design, not production tested. Typical Operating Characteristics (VCC = full range, TA = -40C to +105C, unless otherwise noted. Typical values are at TA = +25C, VCC = +5V for L/M/J versions, VCC = +3.3V for T/S versions, VCC = +3V for R version, and VCC = +2.5V for Z version.) POWER-DOWN RESET DELAY vs. TEMPERATURE (MAX8_ _R/S/T/Z) MAX8_ _R/S/T, VCC = 3.3V 10 MAX8_ _Z, VCC = 2.5V 5 VOD = VTH - VCC 80 VOD = 10mV 60 VOD = 20mV 40 VOD = 100mV 20 140 60 40 VOD = 200mV 0 20 40 60 20 0 40 TEMPERATURE (C) -20 -40 85 TEMPERATURE (C) 40 VOD = 200mV 0 85 -40 -20 20 0 40 TEMPERATURE (C) NORMALIZED RESET THRESHOLD vs. TEMPERATURE 1.003 MAX803-TOC5 245 1.002 NORMALIZED THRESHOLD POWER-UP RESET TIMEOUT (ms) 60 POWER-UP RESET TIMEOUT vs. TEMPERATURE 250 MAX8_ _J/L/M 240 MAX8_ _R/S/T/Z 235 230 1.001 1.000 0.999 0.998 0.997 225 -40 -20 0 20 40 TEMPERATURE (C) 4 VOD = 100mV MAX803-TOC6 0 VOD = 20mV 80 20 0 -20 VOD = 10mV 100 MAX8_ _L/M/R/S/T/Z, VCC = 1V -40 VOD = VTH - VCC 120 60 85 -40 -20 MAX803-TOC4 MAX803-TOC3 MAX803 toc01 MAX8_ _L/M, VCC = 5V 100 POWER-DOWN RESET DELAY (s) 15 POWER-DOWN RESET DELAY vs. TEMPERATURE (MAX8_ _J/L/M) POWER-DOWN RESET DELAY (s) SUPPLY CURRENT vs. TEMPERATURE (SC70 PACKAGE, NO LOAD) SUPPLY CURRENT (A) MAX803L/M/R/S/T/Z, MAX809J/L/M/R/S/T/Z, MAX810L/M/R/S/T/Z 3-Pin Microprocessor Reset Circuits 0 20 40 60 TEMPERATURE (C) _______________________________________________________________________________________ 85 60 85 3-Pin Microprocessor Reset Circuits PART/SUFFIX RESET THRESHOLD (V) OUTPUT TYPE 4.63 4.38 3.08 2.93 2.63 2.32 4.63 4.38 4.00 3.08 2.93 2.63 2.32 4.63 4.38 3.08 2.93 2.63 2.32 OPEN-DRAIN RESET OPEN-DRAIN RESET OPEN-DRAIN RESET OPEN-DRAIN RESET OPEN-DRAIN RESET OPEN-DRAIN RESET PUSH-PULL RESET PUSH-PULL RESET PUSH-PULL RESET PUSH-PULL RESET PUSH-PULL RESET PUSH-PULL RESET PUSH-PULL RESET PUSH-PULL RESET PUSH-PULL RESET PUSH-PULL RESET PUSH-PULL RESET PUSH-PULL RESET PUSH-PULL RESET MAX803L MAX803M MAX803T MAX803S MAX803R MAX803Z MAX809L MAX809M MAX809J MAX809T MAX809S MAX809R MAX809Z MAX810L MAX810M MAX810T MAX810S MAX810R MAX810Z Detailed Description A microprocessor's (P's) reset input starts the P in a known state. The MAX803/MAX809/MAX810 assert reset to prevent code-execution errors during powerup, power-down, or brownout conditions. They assert a reset signal whenever the VCC supply voltage declines below a preset threshold, keeping it asserted for at least 140ms after VCC has risen above the reset threshold. The MAX803 uses an open-drain output, and the MAX809/MAX810 have a push-pull output stage. Connect a pull-up resistor on the MAX803's RESET output to any supply between 0 and 6V. Pin Description PIN NAME 1 GND Ground RESET (MAX803/ MAX809) RESET Output remains low while VCC is below the reset threshold, and for at least 140ms after VCC rises above the reset threshold. RESET (MAX810) RESET Output remains high while VCC is below the reset threshold, and for at least 140ms after VCC rises above the reset threshold. VCC Supply Voltage (+5V, +3.3V, +3.0V, or +2.5V) 2 3 FUNCTION TOP MARK SOT SC70 AAAA ABAA CWAA ACAA ADAA AFAA AGAA AHAA AJAA AKAA ALAA AAZ ABA ABB ABC ABD ABE AAN AAO AAP AAQ AAR AAS AAT AAU AAV AAX AAW AAY Applications Information Negative-Going VCC Transients In addition to issuing a reset to the P during power-up, power-down, and brownout conditions, the MAX803/ MAX809/MAX810 are relatively immune to short-duration negative-going VCC transients (glitches). Figure 1 shows typical transient duration vs. reset comparator overdrive, for which the MAX803/MAX809/ MAX810 do not generate a reset pulse. The graph was generated using a negative-going pulse applied to VCC, starting 0.5V above the actual reset threshold and ending below it by the magnitude indicated (reset comparator overdrive). The graph indicates the maximum pulse width a negative-going VCC transient can have without causing a reset pulse. As the magnitude of the transient increases (goes farther below the reset threshold), the maximum allowable pulse width decreases. Typically, for the MAX8__L and MAX8__M, a VCC transient that goes 100mV below the reset threshold and lasts 20s or less will not cause a reset pulse. A 0.1F bypass capacitor mounted as close as possible to the VCC pin provides additional transient immunity. Ensuring a Valid Reset Output Down to VCC = 0 When VCC falls below 1V, the MAX809 RESET output no longer sinks current--it becomes an open circuit. _______________________________________________________________________________________ 5 MAX803L/M/R/S/T/Z, MAX809J/L/M/R/S/T/Z, MAX810L/M/R/S/T/Z Selector Guide Therefore, high-impedance CMOS logic inputs connected to RESET can drift to undetermined voltages. This presents no problem in most applications since most P and other circuitry is inoperative with VCC below 1V. However, in applications where RESET must be valid down to 0V, adding a pull-down resistor to RESET causes any stray leakage currents to flow to ground, holding RESET low (Figure 2). R1's value is not critical; 100k is large enough not to load RESET and small enough to pull RESET to ground. A 100k pull-up resistor to VCC is also recommended for the MAX810 if RESET is required to remain valid for VCC < 1V. Interfacing to Ps with Bidirectional Reset Pins Since the RESET output on the MAX803 is open drain, this device interfaces easily with Ps that have bidirectional reset pins, such as the Motorola 68HC11. Connecting the P supervisor's RESET output directly to the microcontroller's (C's) RESET pin with a single pull-up resistor allows either device to assert reset (Figure 3). MAX803 Open-Drain RESET Output Allows Use with Multiple Supplies Generally, the pull-up connected to the MAX803 will connect to the supply voltage that is being monitored at the IC's VCC pin. However, some systems may use the open-drain output to level-shift from the monitored supply to reset circuitry powered by some other supply (Figure 4). Note that as the MAX803's VCC decreases 400 MAXIMUM TRANSIENT DURATION (s) MAX803L/M/R/S/T/Z, MAX809J/L/M/R/S/T/Z, MAX810L/M/R/S/T/Z 3-Pin Microprocessor Reset Circuits TA = +25C 320 VCC 240 MAX809 RESET 160 MAX8_ _J/L/M 80 R1 100k GND MAX8_ _R/S/T/Z 0 10 1 100 1000 RESET COMPARATOR OVERDRIVE, VTH - VCC (mV) Figure 2. RESET Valid to VCC = Ground Circuit Figure 1. Maximum Transient Duration Without Causing a Reset Pulse vs. Reset Comparator Overdrive +5.0V +3.3V VCC VCC VCC VCC VCC P MAX803 RESET RESET INPUT RPULLUP 5V SYSTEM MAX803 RESET MOTOROLA 68HCXX RESET INPUT GND GND Figure 3. Interfacing to Ps with Bidirectional Reset I/O 6 GND GND Figure 4. MAX803 Open-Drain RESET Output Allows Use with Multiple Supplies _______________________________________________________________________________________ 3-Pin Microprocessor Reset Circuits Benefits of Highly Accurate Reset Threshold Most P supervisor ICs have reset threshold voltages between 5% and 10% below the value of nominal supply voltages. This ensures a reset will not occur within 5% of the nominal supply, but will occur when the supply is 10% below nominal. When using ICs rated at only the nominal supply 5%, this leaves a zone of uncertainty where the supply is between 5% and 10% low, and where the reset may or may not be asserted. The MAX8_ _L/T/Z use highly accurate circuitry to ensure that reset is asserted close to the 5% limit, and long before the supply has declined to 10% below nominal. ___________________Chip Information TRANSISTOR COUNT: 275 (SOT23) 380 (SC70) Package Information SC70, 3L.EPS (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to www.maxim-ic.com/packages.) PACKAGE OUTLINE, 3L SC70 21-0075 C 1 1 _______________________________________________________________________________________ 7 MAX803L/M/R/S/T/Z, MAX809J/L/M/R/S/T/Z, MAX810L/M/R/S/T/Z below 1V, so does the IC's ability to sink current at RESET. Also, with any pull-up, RESET will be pulled high as VCC decays toward 0. The voltage where this occurs depends on the pull-up resistor value and the voltage to which it is connected. Package Information (continued) (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to www.maxim-ic.com/packages.) SOTPO3L.EPS MAX803L/M/R/S/T/Z, MAX809J/L/M/R/S/T/Z, MAX810L/M/R/S/T/Z 3-Pin Microprocessor Reset Circuits Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. 8 _____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 (c) 2005 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products, Inc. MAX809M - Part Number Table - Maxim/Dallas Page 1 of 2 ENGLISH * * * WHAT'S NEW PRODUCTS SOLUTIONS DESIGN APPNOTES SUPPORT BUY COMPANY MEMBERS MAX809M Part Number Table Notes: 1. 2. 3. 4. 5. See the MAX809M QuickView Data Sheet for further information on this product family or download the MAX809M full data sheet (PDF, 208kB). Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day. Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt. More: See full data sheet or Part Naming Conventions. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Part Number Free Sample Buy Temp Package: TYPE PINS SIZE Direct DRAWING CODE/VAR * RoHS/Lead-Free? Materials Analysis MAX809MEXR+T10 Buy -40C to +125C RoHS/Lead-Free: Yes MAX809MEUR+T10 Buy -40C to +85C MAX809MEXR Buy SC-70;3 pin; Dwg: 21-0075C (PDF) Use pkgcode/variation: X3-2* -40C to +125C RoHS/Lead-Free: No Materials Analysis Buy SC-70;3 pin; Dwg: 21-0075C (PDF) Use pkgcode/variation: X3+2* -40C to +125C RoHS/Lead-Free: Yes MAX809MEXR+ Sample RoHS/Lead-Free: Yes Materials Analysis MAX809MEXR-T Buy SC-70;3 pin; Dwg: 21-0075C (PDF) Use pkgcode/variation: X3-2* -40C to +125C RoHS/Lead-Free: No Materials Analysis MAX809MEXR-T10 Buy SC-70;3 pin; Dwg: 21-0075C (PDF) -40C to +125C RoHS/Lead-Free: No Materials Analysis mhtml:file://C:\TEMP\MAXM\MAX809MEUR-TG002.mht 31-Jul-2007 MAX809M - Part Number Table - Maxim/Dallas Page 2 of 2 Use pkgcode/variation: X3-2* MAX809MEXR+T MAX809MEUR-TG002 Buy SC-70;3 pin; Dwg: 21-0075C (PDF) Use pkgcode/variation: X3+2* -40C to +125C RoHS/Lead-Free: Yes Buy SOT-23;3 pin; Dwg: 21-0051G (PDF) Use pkgcode/variation: U3-1* -40C to +85C RoHS/Lead-Free: No Materials Analysis Materials Analysis MAX809MEUR Sample Buy SOT-23;3 pin; Dwg: 21-0051G (PDF) Use pkgcode/variation: U3-1* -40C to +85C RoHS/Lead-Free: No Materials Analysis MAX809MEUR+ Sample Buy SOT-23;3 pin; Dwg: 21-0051G (PDF) Use pkgcode/variation: U3+1* -40C to +85C RoHS/Lead-Free: Yes SOT-23;3 pin; Dwg: 21-0051G (PDF) Use pkgcode/variation: U3+1* -40C to +85C MAX809MEUR+T Buy Materials Analysis RoHS/Lead-Free: Yes Materials Analysis MAX809MEUR-T10 Buy SOT-23;3 pin; Dwg: 21-0051G (PDF) Use pkgcode/variation: U3-1* -40C to +85C RoHS/Lead-Free: No Materials Analysis MAX809MEUR-T Buy SOT-23;3 pin; Dwg: 21-0051G (PDF) Use pkgcode/variation: U3-1* -40C to +85C RoHS/Lead-Free: No Materials Analysis Didn't Find What You Need? CONTACT US: FEEDBACK, QUESTIONS RATE THIS PAGE MAIL THIS PAGE Copyright (c) 2007 by Maxim Integrated Products, Dallas Semiconductor * Legal Notices * Privacy Policy mhtml:file://C:\TEMP\MAXM\MAX809MEUR-TG002.mht 31-Jul-2007 MAX803L, MAX803M, MAX803R, MAX803S, MAX803T, MAX803Z, MAX80...X810S, MAX810T, MAX810Z 3-Pin Microprocessor Reset Circuits ENGLISH * **** * *** * *** WHAT'S NEW PRODUCTS SOLUTIONS DESIGN APPNOTES SUPPORT BUY COMPANY MEMBERS Maxim > Products > Supervisors, Voltage Monitors, Sequencers Automotive MAX803L, MAX803M, MAX803R, MAX803S, MAX803T, MAX803Z, MAX809J, MAX809L, MAX809M, MAX809R, MAX809S, MAX809T, MAX809Z, MAX810L, MAX810M, MAX810R, MAX810S, MAX810T, MAX810Z 3-Pin Microprocessor Reset Circuits Industry's-First 3-Pin SC70 Reset ICs QuickView Technical Documents Ordering Info More Information User Comments (0) All Ordering Information Notes: 1. Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales. 2. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day. 3. Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt. More: SeeFull Data Sheet or Part Naming Conventions. 4. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character. Filter: MAX803LEXR+T10 Go Devices: 1-100 of 178 1 2 ---> MAX803L Free Sample MAX803LEXR+T10 Buy Temp Package: TYPE PINS FOOTPRINT DRAWING CODE/VAR * -40C to +125C See data sheet Buy MAX803LEXR+ Sample Buy MAX803LEXR Sample Buy MAX803LEXR+T Buy MAX803LEXR-T10 Buy RoHS/Lead-Free? Materials Analysis SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3+2* -40C to +125C RoHS/Lead-Free: Lead Free Materials Analysis SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3-2* -40C to +125C RoHS/Lead-Free: No Materials Analysis SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3+2* -40C to +125C RoHS/Lead-Free: Lead Free Materials Analysis SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3-2* -40C to +125C RoHS/Lead-Free: No Materials Analysis http://www.maxim-ic.com/quick_view2.cfm/qv_pk/1194/t/or (1 of 8) [27-Nov-2008 1:40:21 PM] MAX803L, MAX803M, MAX803R, MAX803S, MAX803T, MAX803Z, MAX80...X810S, MAX810T, MAX810Z 3-Pin Microprocessor Reset Circuits MAX803LEXR-T MAX803M Buy Free Sample MAX803MEXR+T10 Buy Sample Buy MAX803MEXR Sample Buy MAX803MEXR-T10 Buy MAX803MEXR-T Buy MAX803MEXR+T Buy MAX803REXR+T10 Buy SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3+2* -40C to +125C RoHS/Lead-Free: Lead Free Materials Analysis SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3-2* -40C to +125C RoHS/Lead-Free: No Materials Analysis SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3-2* -40C to +125C RoHS/Lead-Free: No Materials Analysis SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3-2* -40C to +125C RoHS/Lead-Free: No Materials Analysis SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3+2* -40C to +85C Buy MAX803REXR Sample Buy MAX803REXR-T10 Buy MAX803REXR-T Buy MAX803REXR+T Buy Free Sample Temp Package: TYPE PINS FOOTPRINT Buy Buy MAX803SEXR-TG05 Buy MAX803SEXR Sample Buy MAX803SEXR+ Sample Buy RoHS/Lead-Free? Materials Analysis SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3+2* -40C to +125C RoHS/Lead-Free: Lead Free Materials Analysis SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3-2* -40C to +125C RoHS/Lead-Free: No Materials Analysis SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3-2* -40C to +125C RoHS/Lead-Free: No Materials Analysis SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3-2* -40C to +125C RoHS/Lead-Free: No Materials Analysis SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3+2* -40C to +125C RoHS/Lead-Free: Lead Free Materials Analysis Temp Package: TYPE PINS FOOTPRINT DRAWING CODE/VAR * MAX803SEXR+T10 RoHS/Lead-Free: Lead Free Materials Analysis -40C to +125C See data sheet Buy Sample RoHS/Lead-Free? Materials Analysis -40C to +125C See data sheet DRAWING CODE/VAR * MAX803REXR+ MAX803S Temp Package: TYPE PINS FOOTPRINT Buy Free Sample -40C to +125C RoHS/Lead-Free: No Materials Analysis DRAWING CODE/VAR * MAX803MEXR+ MAX803R SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3-2* RoHS/Lead-Free? Materials Analysis -40C to +125C See data sheet SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3-2* -40C to +125C RoHS/Lead-Free: No Materials Analysis SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3-2* -40C to +125C RoHS/Lead-Free: No Materials Analysis SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3+2* -40C to +125C RoHS/Lead-Free: Lead Free Materials Analysis http://www.maxim-ic.com/quick_view2.cfm/qv_pk/1194/t/or (2 of 8) [27-Nov-2008 1:40:21 PM] MAX803L, MAX803M, MAX803R, MAX803S, MAX803T, MAX803Z, MAX80...X810S, MAX810T, MAX810Z 3-Pin Microprocessor Reset Circuits MAX803SEXR-T Buy MAX803SEXR-T10 Buy MAX803SEXR+T Buy MAX803T Free Sample MAX803TEXR+T10 Buy Buy MAX803TEXR+ Sample Buy MAX803TEXR+T Buy MAX803TEXR-T Buy MAX803TEXR-T10 Buy Free Sample MAX803ZEXR+T10 Buy -40C to +125C RoHS/Lead-Free: No Materials Analysis SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3+2* -40C to +125C RoHS/Lead-Free: Lead Free Materials Analysis Sample Buy MAX803ZEXR Sample Buy MAX803ZEXR-T Buy MAX803ZEXR-T10 Buy MAX803ZEXR+T Buy MAX809JEUR+T10 Buy SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3-2* -40C to +125C RoHS/Lead-Free: No Materials Analysis SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3+2* -40C to +125C RoHS/Lead-Free: Lead Free Materials Analysis SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3+2* -40C to +125C RoHS/Lead-Free: Lead Free Materials Analysis SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3-2* -40C to +125C RoHS/Lead-Free: No Materials Analysis SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3-2* -40C to +125C RoHS/Lead-Free: No Materials Analysis Temp Package: TYPE PINS FOOTPRINT SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3+2* -40C to +125C RoHS/Lead-Free: Lead Free Materials Analysis SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3-2* -40C to +125C RoHS/Lead-Free: No Materials Analysis SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3-2* -40C to +125C RoHS/Lead-Free: No Materials Analysis SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3-2* -40C to +125C RoHS/Lead-Free: No Materials Analysis SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3+2* -40C to +125C RoHS/Lead-Free: Lead Free Materials Analysis Temp Package: TYPE PINS FOOTPRINT DRAWING CODE/VAR * Buy RoHS/Lead-Free? Materials Analysis -40C to +125C See data sheet RoHS/Lead-Free? Materials Analysis -40C to +105C See data sheet Buy Sample RoHS/Lead-Free? Materials Analysis -40C to +125C See data sheet Buy Free Sample Temp Package: TYPE PINS FOOTPRINT DRAWING CODE/VAR * MAX803ZEXR+ MAX809JEUR+ SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3-2* Buy Sample MAX809J -40C to +125C RoHS/Lead-Free: No Materials Analysis DRAWING CODE/VAR * MAX803TEXR MAX803Z SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3-2* SOT-23;3 pin; Dwg: 21-0051 (PDF) Use pkgcode/variation: U3+1* -40C to +105C RoHS/Lead-Free: Lead Free Materials Analysis http://www.maxim-ic.com/quick_view2.cfm/qv_pk/1194/t/or (3 of 8) [27-Nov-2008 1:40:21 PM] MAX803L, MAX803M, MAX803R, MAX803S, MAX803T, MAX803Z, MAX80...X810S, MAX810T, MAX810Z 3-Pin Microprocessor Reset Circuits MAX809JEUR Sample Buy MAX809JEUR-T Buy MAX809JEUR+T Buy MAX809JEUR-T10 Buy MAX809L Free Sample Buy SOT-23;3 pin; Dwg: 21-0051 (PDF) Use pkgcode/variation: U3-1* -40C to +105C RoHS/Lead-Free: No Materials Analysis SOT-23;3 pin; Dwg: 21-0051 (PDF) Use pkgcode/variation: U3-1* -40C to +105C RoHS/Lead-Free: No Materials Analysis SOT-23;3 pin; Dwg: 21-0051 (PDF) Use pkgcode/variation: U3+1* -40C to +105C RoHS/Lead-Free: Lead Free Materials Analysis SOT-23;3 pin; Dwg: 21-0051 (PDF) Use pkgcode/variation: U3-1* -40C to +105C RoHS/Lead-Free: No Materials Analysis Temp Package: TYPE PINS FOOTPRINT DRAWING CODE/VAR * RoHS/Lead-Free? Materials Analysis MAX809LEXR+T10 Buy -40C to +85C MAX809LEUR+T10 Buy -40C to +105C See data sheet MAX809LEXR Sample Buy MAX809LEXR+ Sample Buy MAX809LEXR-T Buy MAX809LEXR-T10 Buy MAX809LEXR+T Buy MAX809LEUR-TG05 Buy MAX809LEUR+ Sample Buy MAX809LEUR Sample Buy MAX809LEUR-T10 Buy MAX809LEUR-T Buy MAX809LEUR+T Buy MAX809M Free Sample Buy See data sheet SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3-2* -40C to +85C RoHS/Lead-Free: No Materials Analysis SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3+2* -40C to +85C RoHS/Lead-Free: Lead Free Materials Analysis SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3-2* -40C to +85C RoHS/Lead-Free: No Materials Analysis SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3-2* -40C to +85C RoHS/Lead-Free: No Materials Analysis SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3+2* -40C to +85C RoHS/Lead-Free: Lead Free Materials Analysis SOT-23;3 pin; Dwg: 21-0051 (PDF) Use pkgcode/variation: U3-1* -40C to +105C RoHS/Lead-Free: No Materials Analysis SOT-23;3 pin; Dwg: 21-0051 (PDF) Use pkgcode/variation: U3+1* -40C to +105C RoHS/Lead-Free: Lead Free Materials Analysis SOT-23;3 pin; Dwg: 21-0051 (PDF) Use pkgcode/variation: U3-1* -40C to +105C RoHS/Lead-Free: No Materials Analysis SOT-23;3 pin; Dwg: 21-0051 (PDF) Use pkgcode/variation: U3-1* -40C to +105C RoHS/Lead-Free: No Materials Analysis SOT-23;3 pin; Dwg: 21-0051 (PDF) Use pkgcode/variation: U3-1* -40C to +105C RoHS/Lead-Free: No Materials Analysis SOT-23;3 pin; Dwg: 21-0051 (PDF) Use pkgcode/variation: U3+1* -40C to +105C RoHS/Lead-Free: Lead Free Materials Analysis Package: TYPE PINS FOOTPRINT DRAWING CODE/VAR * http://www.maxim-ic.com/quick_view2.cfm/qv_pk/1194/t/or (4 of 8) [27-Nov-2008 1:40:21 PM] Temp RoHS/Lead-Free? Materials Analysis MAX803L, MAX803M, MAX803R, MAX803S, MAX803T, MAX803Z, MAX80...X810S, MAX810T, MAX810Z 3-Pin Microprocessor Reset Circuits MAX809MEXR+T10 Buy -40C to +85C MAX809MEUR+T10 Buy -40C to +105C See data sheet MAX809MEXR Buy MAX809MEXR+ Sample Buy MAX809MEXR+T Buy MAX809MEXR-T Buy MAX809MEXR-T10 Buy MAX809MEUR-TG05 Buy MAX809MEUR-TG002 Buy MAX809MEUR Sample Buy MAX809MEUR+ Sample Buy MAX809MEUR-T Buy MAX809MEUR-T10 Buy MAX809MEUR+T Buy MAX809R Free Sample Buy SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3-2* -40C to +85C RoHS/Lead-Free: No Materials Analysis SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3+2* -40C to +85C RoHS/Lead-Free: Lead Free Materials Analysis SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3+2* -40C to +85C RoHS/Lead-Free: Lead Free Materials Analysis SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3-2* -40C to +85C RoHS/Lead-Free: No Materials Analysis SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3-2* -40C to +85C RoHS/Lead-Free: No Materials Analysis SOT-23;3 pin; Dwg: 21-0051 (PDF) Use pkgcode/variation: U3-1* -40C to +105C RoHS/Lead-Free: No Materials Analysis SOT-23;3 pin; Dwg: 21-0051 (PDF) Use pkgcode/variation: U3-1* -40C to +105C RoHS/Lead-Free: No Materials Analysis SOT-23;3 pin; Dwg: 21-0051 (PDF) Use pkgcode/variation: U3-1* -40C to +105C RoHS/Lead-Free: No Materials Analysis SOT-23;3 pin; Dwg: 21-0051 (PDF) Use pkgcode/variation: U3+1* -40C to +105C RoHS/Lead-Free: Lead Free Materials Analysis SOT-23;3 pin; Dwg: 21-0051 (PDF) Use pkgcode/variation: U3-1* -40C to +105C RoHS/Lead-Free: No Materials Analysis SOT-23;3 pin; Dwg: 21-0051 (PDF) Use pkgcode/variation: U3-1* -40C to +105C RoHS/Lead-Free: No Materials Analysis SOT-23;3 pin; Dwg: 21-0051 (PDF) Use pkgcode/variation: U3+1* -40C to +105C RoHS/Lead-Free: Lead Free Materials Analysis Temp Package: TYPE PINS FOOTPRINT DRAWING CODE/VAR * MAX809REUR+T10 Buy MAX809REXR+T10 Buy MAX809REXR+ Sample Buy MAX809REXR Sample Buy See data sheet RoHS/Lead-Free? Materials Analysis -40C to +105C See data sheet SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3+2* -40C to +85C RoHS/Lead-Free: Lead Free Materials Analysis SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3+2* -40C to +85C RoHS/Lead-Free: Lead Free Materials Analysis SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3-2* -40C to +85C RoHS/Lead-Free: No Materials Analysis http://www.maxim-ic.com/quick_view2.cfm/qv_pk/1194/t/or (5 of 8) [27-Nov-2008 1:40:21 PM] MAX803L, MAX803M, MAX803R, MAX803S, MAX803T, MAX803Z, MAX80...X810S, MAX810T, MAX810Z 3-Pin Microprocessor Reset Circuits MAX809REXR-T Buy MAX809REXR-T10 Buy MAX809REXR+T Buy MAX809REUR+ Sample Buy MAX809REUR Sample Buy MAX809REUR+T Buy MAX809REUR-T Buy MAX809REUR-T10 Buy MAX809S Free Sample MAX809SEXR+T10 Buy -40C to +85C RoHS/Lead-Free: No Materials Analysis SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3-2* -40C to +85C RoHS/Lead-Free: No Materials Analysis SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3+2* -40C to +85C RoHS/Lead-Free: Lead Free Materials Analysis SOT-23;3 pin; Dwg: 21-0051 (PDF) Use pkgcode/variation: U3+1* -40C to +105C RoHS/Lead-Free: Lead Free Materials Analysis SOT-23;3 pin; Dwg: 21-0051 (PDF) Use pkgcode/variation: U3-1* -40C to +105C RoHS/Lead-Free: No Materials Analysis SOT-23;3 pin; Dwg: 21-0051 (PDF) Use pkgcode/variation: U3+1* -40C to +105C RoHS/Lead-Free: Lead Free Materials Analysis SOT-23;3 pin; Dwg: 21-0051 (PDF) Use pkgcode/variation: U3-1* -40C to +105C RoHS/Lead-Free: No Materials Analysis SOT-23;3 pin; Dwg: 21-0051 (PDF) Use pkgcode/variation: U3-1* -40C to +105C RoHS/Lead-Free: No Materials Analysis Temp Package: TYPE PINS FOOTPRINT DRAWING CODE/VAR * Sample Buy MAX809SEXR Sample Buy MAX809SEXR-T Buy MAX809SEXR-T10 Buy MAX809SEXR+T Buy MAX809SEUR+T10 Buy MAX809SEUR+ Sample Buy MAX809SEUR Sample Buy Buy RoHS/Lead-Free? Materials Analysis -40C to +85C See data sheet SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3+2* -40C to +85C RoHS/Lead-Free: Lead Free Materials Analysis SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3-2* -40C to +85C RoHS/Lead-Free: No Materials Analysis SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3-2* -40C to +85C RoHS/Lead-Free: No Materials Analysis SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3-2* -40C to +85C RoHS/Lead-Free: No Materials Analysis SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3+2* -40C to +85C RoHS/Lead-Free: Lead Free Materials Analysis Buy MAX809SEXR+ MAX809SEUR+T SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3-2* -40C to +105C See data sheet SOT-23;3 pin; Dwg: 21-0051 (PDF) Use pkgcode/variation: U3+1* -40C to +105C RoHS/Lead-Free: Lead Free Materials Analysis SOT-23;3 pin; Dwg: 21-0051 (PDF) Use pkgcode/variation: U3-1* -40C to +105C RoHS/Lead-Free: No Materials Analysis SOT-23;3 pin; Dwg: 21-0051 (PDF) Use pkgcode/variation: U3+1* -40C to +105C RoHS/Lead-Free: Lead Free Materials Analysis http://www.maxim-ic.com/quick_view2.cfm/qv_pk/1194/t/or (6 of 8) [27-Nov-2008 1:40:21 PM] MAX803L, MAX803M, MAX803R, MAX803S, MAX803T, MAX803Z, MAX80...X810S, MAX810T, MAX810Z 3-Pin Microprocessor Reset Circuits MAX809SEUR-T10 Buy MAX809SEUR-T Buy MAX809T Free Sample MAX809TEXR+T10 Buy SOT-23;3 pin; Dwg: 21-0051 (PDF) Use pkgcode/variation: U3-1* -40C to +105C RoHS/Lead-Free: No Materials Analysis SOT-23;3 pin; Dwg: 21-0051 (PDF) Use pkgcode/variation: U3-1* -40C to +105C RoHS/Lead-Free: No Materials Analysis Temp Package: TYPE PINS FOOTPRINT RoHS/Lead-Free? Materials Analysis DRAWING CODE/VAR * -40C to +85C See data sheet SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3-2* -40C to +85C RoHS/Lead-Free: No Materials Analysis SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3+2* -40C to +85C RoHS/Lead-Free: Lead Free Materials Analysis SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3-2* -40C to +85C RoHS/Lead-Free: No Materials Analysis SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3+2* -40C to +85C RoHS/Lead-Free: Lead Free Materials Analysis SC-70;3 pin; Dwg: 21-0075 (PDF) Use pkgcode/variation: X3-2* -40C to +85C RoHS/Lead-Free: No Materials Analysis Buy MAX809TEXR Sample Buy MAX809TEXR+ Sample Buy MAX809TEXR-T10 Buy MAX809TEXR+T Buy MAX809TEXR-T Buy Filter: MAX803LEXR+T10 Go Devices: 1-100 of 178 1 2 ---> Didn't Find What You Need? Next Day Product Selection Assistance from Applications Engineers Parametric Search Applications Help QuickView Technical Documents Ordering Info More Information Description Key Features Applications/Uses Key Specifications Diagram Data Sheet Application Notes Design Guides Engineering Journals Reliability Reports Software/Models Evaluation Kits Price and Availability Samples Buy Online Package Information Lead-Free Information Related Products Notes and Comments Evaluation Kits Document Ref.: 19-0344; Rev 6; 2006-03-27 This page last modified: 2007-10-09 CONTACT US: FEEDBACK, QUESTIONS RATE THIS PAGE http://www.maxim-ic.com/quick_view2.cfm/qv_pk/1194/t/or (7 of 8) [27-Nov-2008 1:40:21 PM] MAIL THIS PAGE MAX803L, MAX803M, MAX803R, MAX803S, MAX803T, MAX803Z, MAX80...X810S, MAX810T, MAX810Z 3-Pin Microprocessor Reset Circuits Privacy Policy * Legal Notices Copyright (c) 2008 by Maxim Integrated Products, Dallas Semiconductor http://www.maxim-ic.com/quick_view2.cfm/qv_pk/1194/t/or (8 of 8) [27-Nov-2008 1:40:21 PM]