REV. | CB DO NOT SCALE FROM PRINT NOTES: 1. PUSHOUT FORCE SHALL BE A oe MIN. 2. GOLD AREA TO APPEAR ON Pi ONE PLACE DECIMALS +.1[2.54] THREE PLACE DECIMALS + .005[.13] TWO PLACE DECIMALS + .01[.25]FOUR PLACE DECIMALS + ,0020[.05] ANGLES +5 m= 050 x .050 DWG NO: SURFACE MOUNT | FHEXX-XX-XX-D+XXX-XXX-XX BOARD SPACERS SHEET 1 of 3 3. TAILS TO BE SHEARED TO DIMENSION SHOWN. (FOR HAND TOOLING ONLY) 4. TO BE VALID ALL PART NUMBERS MUST MEET THE FOLLOWING PARAMETERS: THE BOARD SPACE RANGE, POST HEIGHT MIN, AND BOARD + POST COMBINATION FOR EACH STYLE. 5. MAX BURR: .003 [.08] ON CUT TAIL. 6. MAX CUT FLASH TO BE .010 [.25] ON CRITICAL AREAS AS SHOWN. 7. DELETED. 8. 9. PATENT NUMBERS No OF POS PER ROW 57138755 / 5961339 02 THRU -50 XX"= No OF POS x .050 [1.27] 03: USE T1S15XXX 05: USE T1815XXX . DELETED (SEE TABLE 1) . AVAILABLE ONLY W/BOARD SPACE .215 [5.46] TO .610 [15.49]. 10. PARTS TO BE ASSEMBLED WTH ALIGNMENT HOLES (IN BODY) FACING THE TAILS. 11. LOWER BODY MAY BE BLACK OR WHITE. 12. NOTE DELETED PLATING G: GOLD (OVER ENTIRE PIN) (USE T1S15xx-G) FLASH SELECTIVE GOLD (use T-1815XX-F) HT SELECTIVE GOLD (USE T1S15XX-L) HEAVY GOLD POST, GOLD FLASH TAIL (USE T1S15XXxXH) F: -L: H: (NO OF POSITIONS X .050[1.27])+.010 [.25] LM: LIGHT GO! MATTE TIN TAIL (USE_T-1815-XX-L) FM: FLASH GO MATTE TIN TAIL (USE T-1S15XXx-F) FW-XXXXXXDXXXX) XXX P: PICK && PLACE PAD (USE PPP-25) (use PPP-25-NT WITH TR ONLY) SEE FIG. 3, SHT 2)(5 POS. MIN) TR: TAPE & REEL 6875 (17. 46] MAX OVERALL HEIGHT AVAILABLE FOR TR. MAX OVERALL HEIGHT= POST + BOARDSPACE + PAD + ALIGNMENT PIN = .6875[17.46] ES: END SHROUDS (SEE FIG. 5, SHT 2) 9 POS PER ROW MIN) MAX POST: .075 [1.91]) (SEE NOTE 9) EP: GUIDE POST (FIG. 6, SHT 3) 9 POS PER ROW MIN) MAX POST: .075 [1.91]) USE ONLY WHEN MATING WITH CLP) SEE NOTE GNMENT EN (wo MOLDED OR STAKED, SAMTECS DISCRETION ON WHICH) (SEE FIG. 7 & 8, SHT 3) (STAKED: 6 POS. MIN)(MOLDED: 3 POS. MIN) (SEE NOTE 9) Az POST HEIGHT (SEE NOTE 4) .085 [1.65] MIN POST + BOARD SPACE = 03: .150-.400 [5.81-10.16] 135 [3.43] REF 05: .401-.675 [10.19-17.15] DOUBLE ROW __ L_ SEE NOTE 4) (SEE TABLE 1 FOR BODY STYLE) BD SPACE Of ) -03 LEAD STYLE (.085 [2.16] MIN .335 [8.51] MAX) -05 LEAD STVLE (. LE (248 [6.30] | MN 610 [15.49] MAX) MAX = "A" .016 [.41] SQ REF 050 [1.27] REF .050 [1.27] REF 2 MAX SWAY EITHER DIRECTION a .034 [.864] REF \ 7 | NOTE 6 POST HEIGHT .070 [1.78] REF (CONTACT AREA) & a"t.005 [.13] 03 -03 03 -03 -05 0S | | | PT12401-71 TUBE POSITIONS 5-50, LAYER PACKAGE ALL OTHERS FTSXXDV (BOARD SPACE) sot4 05 T1S15XXX 03, -05 & = L [-s02-30 Pos. = .004 [10 7 PACKAGING NOTE: 31-50 POS. = .006 [15 005 -0502 900 FIG. 1 [1.27493] .229+.010 [5.82+.25] (SEE NOTE 3) SEE NOTE 6 TABLE 1 . *C RANGE *D RANGE FTS5O-DV & LEAD | ay" RANGE (SEE SHEET 2, (SEE SHEET 2, BOoY STYLE TERMINAL PIN FIG. STYLE Fi 5 & 6) Fic 5 & 6) UPPER BODY | LOWER BODY b 03 (ris = oa] N/A N/A FTs-xx-pv | FIs-xxX-ov | T-1515-04-x 1 ENTE 61301 _ .203 423 REF 413 543 REF MINAL: 03 | 243 = 3h [7.48 - 10.75] [10.50 13.79] _| FISH-XX-D [*FTSH-xX-D | T-1S15~035-Xx 2 (SEE SHEET 2) MA FLASH] ALLOWED: = 326 .608 REF 446 818 REF 05 |eP - iS] [a2s 17.73) [risa zo7e] | FISH-xx-D |FTsH-xx-p | T-1815-03-x |4 (SEE SHEET 2) EOF 55) * FOR BKT MACHINE, USE FWXXD =o 520 PARK EAST BLVD. NEW ABANY, NOUN INDIANA 47150 PHONE (812) 944-6733 P.O. BOX 1147 CODE 55522 | GABE BY: BRATCHER 11-3-94 PH-XXXXXXD-XXK-XK-XX SHEET 1 OF 3 a