Sharma Film Capacitors FILM CAPACITORS Quick Reference Guide Series (Former Series) Dielectric/ Construction Lead Spacing millimeters / (inches) Capacitance Range Voltage Range MKT 050 (MKT1.85) Metallized Polyester Molded can 5.0 (0.200") 0.001 F to 1.0 F 50 VDC to 400 VDC MKT 075 (MKT1.67) Metallized Polyester Molded can 7.5 (0.300") 0.033 F to 0.33 F 100 VDC to 630 VDC MKT 100 (MKT1.60) Metallized Polyester Molded can 10.0 (0.400"), 15.0 (0.600"), 22.5 (0.886"), 27.5 (1.083") 0.001 F to 6.8 F 100 VDC to 1000 VDC MKT 00S (SMX) Metallized Polyester Epoxy molded Surface Mount 0.01 F to 0.22 F 50 VDC to 630 VDC MKT D01 (MPD-1) Metallized Polyester Epoxy dipped 10.0 (0.400"), 15.0 (0.600"), 22.5 (0.886"), 27.5 (1.083") 0.001 F to 6.8 F 100 VDC to 630VDC MKT D02 (MPD-2) Metallized Polyester Epoxy dipped 10.0 (0.400"), 15.0 (0.600"), 17.5 (0.689"), 25.0 (0.984") 27.5 (1.083") 0.01 F to 3.9 F 100 VDC to 630VDC MKT D03 (MPD-3) Metallized Polyester Epoxy dipped 10.0 (0.400"), 15.0 (0.600"), 17.5 (0.689"), 25.0 (0.984") 27.5 (1.083") 0.01 F to 3.9 F 100 VDC to 630VDC MKTR (MPR) Metallized Polyester Tape wrapped Rounded Axial 0.01 F to 6.8 F 63 VDC to 630 VDC MKTO (MPO) Metallized Polyester Tape wrapped Oval Axial 0.01 F to 6.8 F 63 VDC to 630 VDC PLASTIC FILMS USED IN CAPACITORS Style The capacitance value of a capacitor depends on the area of the dielectric separating the two conductors, its thickness and the dielectric constant. Other properties of the film such as the temperature coefficient, the dissipation factor, the voltage handling capabilities, its suitability to be metallized etc. also influence the choice of the dielectric. POLYESTER FILM This film has a relatively high dielectric constant which makes it suitable for designs of a capacitor with high volumetric efficiency. It also has high temperature stability, high voltage and pulse handling capabilities and can be produced in very low thickness. It can also be metallized. Polyester is a popular dielectric for plain film capacitors as well as metallized film capacitors. POLYPROPYLENE FILM The dielectric constant of polypropylene is slightly higher than that of polyester which makes the capacitors relatively bigger in size. This film has a low dissipation factor and excellent voltage and pulse handling capabilities together with a low and negative temperature coefficient which is an ideal characteristic for many designs. Polypropylene has the capability to be metallized. POLYSTYRENE FILM The dielectric constant of Polystyrene is relatively lower resulting in larger physical size of capacitors. Though the temperature handling capability of this film is lower than that of the other films, it is extremely stable within the range. Its low dissipation factor and the negative, near linear temperature coefficient characteristics make it the ideal dielectric for precision capacitors. Polystyrene cannot be metallized. Cross Reference Guide SHARMA (former series) Arcotronics MKT 050 MKT1.85 MKT 075 MKT1.67 MKT 100 MKT1.60 MKT 00S SMX MKT D01 MPD-1 MKT D02 MPD-2 MKT D03 MPD-3 MKTR MPR MKTO MPO R.85 R.66 R.60 LDA - - - - - Evox MMK 5 MMK MMK - - - - - - MEPCO* 712A 1 719A 1 719A 1 - 712A 1 712A 1 712A 1 - - Philips 370 371 372 & 373 - 367 to 369 366 to 369 367 to 369 - - MKT1817 MKT1818 MKT1822 MKT1824 - - - MKT1813 - Siemens B32529 B32520/30 B32521/31 - 5140 to 44 5140 to 44 5140 to 44 - - Thompson IRD/MC IRD/MC IRD/MC - MD MD MD - - Wima MKS 2 MKS 3 MKS 4 SMD 7.3 - - - Roederstein * MEPCO SERIES ARE BEING REPLACED WITH PHILIPS SERIES AS LISTED IN THE TABLE. BOTH SERIES ARE LISTED FOR YOUR CONVENIENCE. - Sharma Film Capacitors Ordering/Part Numbering Example below indicates: MKT100 Series, 0.1F, 5% Tol., 100 Volts, Bulk. (EXAMPLE) M K T 1 0 0 1 0 4 J 1 0 1 RH Series RoHS Compliant Enter Series Code: (Up to 6 Digits) MKT050, MKT075, MKT100, MKT00S, MKTD01, MKTD02, MKTD03, MKTR, MKTO. Capacitance Enter EIA Capacitance Code: (3 Digits) First Two Digits Represent Significant Figures of Capacitance in Picofarads. Third Digit Indicates Number of Zeros Example: 1000pF = 102 0.01uF = 103 Tolerance Enter Capacitance Tolerance Code: (1 Digit) Tolerance SPCL 1% 2% 3% Code A F G L 5% J 6% H 10% 20% K M Rated Voltage Enter Voltage Code: (3 Digits) First Two Digits Represent Significant Figures of DC Voltage unless individual data sheet specifies Only AC Rating. Third Digit Indicates Number of Zeros Example: 50V DC = 500 250V DC = 251 Product Packaging Code Standard for Film Capacitors is Bulk packing. No Packaging Code Required for Bulk Style. For other packaging styles, Enter packaging code listed below. (1 Digit) Packaging Code T A ( no code) Packaging Style Tape / Reel Ammo Bulk Part Marking BOX TYPE The Capacitance value is marked in F together with the Tolerance code and the DC Voltage Figures on the top surface of the capacitors. The MKT 100 capacitance is also marked in Nano Farads with "n" representing the decimal point in the capacitance value. The SAHA logo and series codes, MKT100, MKP 100, KP300 etc., or their former series designations, are marked on the side. MKT100 series is supplied in certain cases, without series code marking. SAHA logo may be replaced with marking, "SH" or "S" depending upon the limitations of space. 2.2J250 DIPPED TYPE The Capacitance value is marked in F along with the Tolerance code and the DC Voltage 2.2K250 Figures on the side of the capacitors. The capacitance is also marked in Capacitance code with the first two digits representing the significant digits followed by one digit representing the number of zeros. The SAHA logo may be replaced with marking, "SH", "S" or no brand marking depending on the limitation of space. OTHER TYPES All other types of capacitors such as tape wrapped axial, tape wrapped radial, vertical box type etc.,. are also marked on the body of the capacitor with the similar information in one of the combinations, as explained above. In addition, in certain cases, the outer foil side is also indicated with a dot or ring. Sharma Film Capacitors PERFORMANCE CHARACTERISTICS Figure 2.1A ELECTRICAL - BASIC PARAMETERS 1.1 RATED CAPACITANCE The nominal or rated value of capacitance is measured at 25 C in an measuring bridge with 1K Hz source, free of harmonics. Please refer to relevant series for the range of capacitance value covered. Capacitance is frequency and temperature dependent. The variation pattern of capacitance with temperature and frequency is explained in sections 2.1 and 2.2. 1.2 CAPACITANCE TOLERANCE The permitted variation of actual value from the nominal value is termed the tolerance. The tolerance is expressed in percentage. The standard tolerances for plastic film capacitors are 5% (J), 10% (K) and 20% (M). 1.3 RATED VOLTAGE The voltage at which the capacitor can operate continuously up to a temperature of 85 C (unless otherwise specified) is the rated voltage. As this is a critical parameter for choosing a capacitor, the case sizes are listed in a matrix of capacitance value and rated voltage. Polystyrene Capacitance Change Vs. Temperature Figure 2.1B 1.4 CATEGORY VOLTAGE The maximum voltage that may be applied continuously over the temperature range is termed the category voltage. This is same as the rated voltage up to 85 C unless otherwise specified in the climactic category of the product. Above 85 C a derating has to be applied depending upon the dielectric. 1.5 OPERATING TEMPERATURE This is the temperature range with in which the capacitor can function as specified in the climactic category. Please refer to relevant sections for derating above the temperature at which the full rated voltage can be applied. 1.6 DISSIPATION FACTOR This is the measurement of tangent of loss angle (tan d) and is expressed as a percentage. Measurement of dissipation factor is carried out at 1 K Hz. or 10 K Hz. as specified in the data sheet of the relevant series at 25 C. Dissipation factor is temperature and frequency dependent. The nature of variation of dissipation factor with temperature and frequency for different dielectric are explained in Figures 2.3A to 2.3C and 2.4A to 2.4C. Polyester Capacitance Change Vs. Temperature Figure 2.1C 1.7 INSULATION RESISTANCE Insulation Resistance is the electrical resistance offered by the capacitor. The Insulation Resistance is measured directly in Mega Ohms where as for higher capacitance values it is expressed in seconds as the product of M Ohm and F. 1.8 PULSE RISE TIME The pulse rise time or dv/dt rating is the capability of the capacitor to handle rapid changes in voltage or pulse. This is expressed in terms of Volts per seconds. The dv/ dt rating of a capacitor depends upon the dielectric as well as the design and construction of the capacitors. The dv/dt values of different types of capacitors are listed in the corresponding data sheets of the capacitors. Polypropylene Capacitance Change Vs. Temperature Figure 2.2A ELECTRICAL - EFFECTS AND RELATIONS 2.1 TEMPERATURE DEPENDENCE OF CAPACITANCE Capacitance of plastic film capacitors vary with temperature. However the pattern of variation is different for different plastic film dielectrics such as Polystyrene, Polyester and Polypropylene. The The variation patterns for these dielectrics are shown in figure 2.1A, 2.1B and 2.1C. The rate of change of capacitance with temperature is termed the Temperature Coefficient. The nominal values of temperature coefficient for different dielectrics are shown below. DIELECTRICS POLYSTYRENE POLYESTER POLYPROPYLENE TEMPERATURE COEFFICIENT -150 ppm +400 ppm -200 ppm 2.2 FREQUENCY DEPENDENCE OF CAPACITANCE Capacitance reduces with increase in frequency. The variation pattern for different dielectrics are shown in figure 2.2A, 2.2B and 2.2C. 2.3 TEMPERATURE DEPENDENCE OF DISSIPATION FACTOR The dissipation factor varies with temperature. Each dielectric follows a unique variation pattern. The variation pattern for different dielectrics are shown in figure 2.3A, 2.3B and 2.3C. Polystyrene Capacitance Change Vs. Frequency Figure 2.2C Polypropylene Capacitance Change Vs. Frequency Figure 2.2B Polyester Capacitance Change Vs. Frequency Sharma Film Capacitors Figure 2.3A Figure 2.4A 2.4 FREQUENCY DEPENDENCE OF DISSIPATION FACTOR Dissipation factor increased with frequency. The variation pattern is different for different dielectrics. The typical variation pattern for different dielectrics are shown in fig. 2.4A, 2.4B and 2.4C. Polystyrene Dissipation Factor Vs. Temperature Figure 2.3B Polystyrene Dissipation Factor Vs. Frequency 2.5 TEMPERATURE DEPENDENCE OF INSULATION RESISTANCE The insulation resistance of the dielectric varies with temperature. The variation pattern is different fro different dielectric films. The typical variation pattern for different dielectrics are shown in figure 2.5A, 2.5B and 2.5C. Figure 2.4B ELECTRICAL - AC APPLICATIONS When a capacitor is connected to alternating voltage its electrodes are alternately charged positive and negative. The charge alternates with a rhythm of double the frequency of the alternating voltage. Thus there is alternating current flowing in the leads of the capacitor. Polyester Dissipation Factor Vs. Temperature Figure 2.3C Polyester Dissipation Factor Vs. Frequency Figure 2.4C 3.1 ACROSS THE LINE APPLICATIONS In this application the capacitor is connected between the lines, ie, between the main phase and neutral line terminals. In this type of application, failure of capacitor due to short circuit will not result in an electric shock. The capacitors rated for normal across the line applications are termed class-X2 capacitors. 3.2 BETWEEN LINE AND GROUND APPLICATIONS In this type of application the capacitors are connected between the line and the ground, ie, between the phase terminal and the body. In this application, failure of the capacitor due to short circuit could possibly expose somebody touching the appliance to an electric shock. The capacitors rated for this application are termed classY capacitors. Polypropylene Dissipation Factor Vs. Temperature Polypropylene Dissipation Factor Vs. Frequency MECHANICAL CHARACTERISTICS Figure 2.5A Polystyrene Insulation Resistance Vs. Temperature Figure 2.5B Polyester Insulation Resistance Vs. Temperature 4.1 RESISTANCE TO SOLVENTS The encapsulation technics adopted in the manufacture of plastic film capacitors ensure resistance to a wide range of solvents and cleaning liquids. The epoxy end sealed boxed capacitors can stand Trichloro trifluorethane, Methanol, Ethanol, Isopropanol and Aqueous cleaning solvents. 4.2 SOLDERABILITY A minimum of 3/4 of the circumferential surface of the terminations will be covered with new solder when dipped in molten solder bath at 230 C for 2 1 sec. after immersing in methanol - rosin solution at room temperature for 5 to 10 seconds. Figure 2.5C 4.3 TERMINAL STRENGTH The leads are made of tinned copper wire. The terminals are capable of withstanding an axial load of 2.25 Kgs(5 lbs). ENVIRONMENTAL RESISTANCE TO HUMIDITY Polypropylene Insulation Resistance Vs. Temperature The capacitor samples will be exposed to 93 2 C for 56 days at 40 2 C. After the test the capacitance change shall be within 3% of the original value, The insulation resistance shall be within 50% of the initial limits and the dissipation factor shall remain within the initial specifications. Sharma Film Capacitors MKT 050 SERIES Formerly MKT 1.85 series INTRODUCTION The MKT 050 Series Metallized Polyester Film Capacitors are miniature capacitors with 5 mm lead spacing. This series covers a wide range of values and voltages and exhibit excellent high frequency characteristics. In addition to specific applications such as Blocking, Bypassing and Coupling, this series is widely used in all General Purpose applications. FEATURES value and Voltage range * Wide miniature size * Ultra retardant case and potting * Flame dimensions and surface finish due to molded case construction * Consistent in tape & reel form for automatic insertion * Available * Self healing capability DIMENSIONS AND TOLERANCES: "d"= 0.5 to 0.6mm (0.020 to 0.024") for dimension "T" 3.5mm (0.138") "d"= 0.6 mm (0.024") for dimension "T" >3.5mm (0.138") "LL'' = 4.0 +1.5mm (0.16 +0.06") for Bulk Supply PULSE RISE TIME (dv/dt) Volts per sec. GENERAL SPECIFICATIONS: Dissipation factor: For capacitance 0.1 F = 0.010 max at 1 KHz, 0.015 max at 10 KHz, 0.030 max at 100 KHz. For capacitance > 0.1 F = 0.0010 max at 1 KHz, 0.0015 max at 10 KHz. Insulation resistance: For nominal voltage < 100 V DC; 10,000 M Ohms for C 0.10 F, 1,000 seconds for C > 0.10 F. For nominal voltage 100 V DC; 30,000 M Ohms for C 0.10 F, 1,000 seconds for C> 0.10 F at a temperature of 25 5 C. Capacitance tolerance: 5%(J), 10%(K) and 20%(M) Voltage Test: 1.6 times the rated voltage applied between terminals for 2 seconds at a temperature of 25 5 C Temperature range: -55 to 100 C with derating above 85 C Climatic category: F M D RATED Capacitance dv/dt VOLTAGE RangeF value 50 63 0.001-1.0 0.001-1.0 4 8 100 >0.0068 10 100 0.0033-0.0068 15 100 >0.0033 30 250 400 0.001-1.0 0.001-1.0 20 40 LIFE TEST DETAILS: Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 C for 1000 hours. After the test: 1. Capacitance change shall remain within 5%. 2. Dissipation Factor shall be within 1.5 times the original limits. 3. Insulation Resistance shall be above 50% of the initial limits. 4. There shall be no remarkable change in the appearance and the marking shall remain legible. Taping Dimensions for MKT 050 Series (5mm Pitch) DESCRIPTION d Lead wire dia. P Tapingpitch P0 Sprocketholepitch P1 Centering of lead wire P2 Centering of the body p Lead spacing dS Component alignment H Height from Sproket Center to component body W Tape width W 0 Width of adhesive tape W 1 Sprocket hole alignment D0 Positionholediameter t Tape thickness DIMENSION TOLERANCES mm Inches mm Inches 0.5 to 0.6 0.020 to 0.024 0.05 0.002 12.7 0.500 1 0.039 12.7 0.500 0.2 0.008 3.85 0.152 0.7 0.028 6.35 0.250 1.3 0.051 5 0.197 +0.6/ -1.1 +0.024/ -0.043 0 0.000 2 0.079 16.0, 16.5 0.630, 0.650 0.5 0.020 or 18.5 or 0.728 18 0.709 +1.0/ -0.5 +0.039/ -0.020 6 min. 0.236 min. 9 0.354 0.5 0.020 4 0.157 0.2 0.008 0.7 0.028 0.2 0.008 Packaging Specifications Bulk, Tape/Reel & Ammo Pack BOX SIZE T x H x L 2.5 x 6.5 x 7.2 3.0 x 6.5 x 7.2 3.5 x 7.5 x 7.2 4.5 x 9.5 x 7.2 5.0 x 10.0 x 7.2 6.0 x 11.0 x 7.2 7.2 x 13.0 x 7.2 BULK CARTON 3000 3000 2000 1500 1000 2000 1500 TAPED REEL PACK AMMO PACK 2500 3500 2100 2900 1800 2500 1400 1900 1200 NA 1000 NA 800 NA Sharma Film Capacitors MKT 050 SERIES CASE DIMENSIONS Case Dimensions in Millimeters 50V * 63V * 100V * 250V * 400V Voltage 50 V DC / 30 V AC 63 V DC / 40 V AC 100 V DC / 63 V AC 250 V DC / 160 V AC Cap Value Dimensions in MM Dimensions in MM Dimensions in MM DIMENSIONS IN MM in F 0.001 L H T S L H T S L H T S 400 V DC / 200 V AC DIMENSIONS IN MM L 7.2 H 6.5 T 2.5 S 5.0 L 7.2 H 6.5 T 2.5 S 5.0 0.0015 7.2 6.5 2.5 0.0022 0.0033 7.2 7.2 6.5 6.5 2.5 2.5 5.0 7.2 6.5 2.5 5.0 5.0 5.0 7.2 7.2 6.5 6.5 2.5 2.5 5.0 5.0 0.0047 7.2 6.5 2.5 5.0 7.2 6.5 2.5 5.0 0.0068 7.2 6.5 2.5 5.0 7.2 6.5 2.5 5.0 7.2 6.5 3.0 5.0 0.01 0.015 7.2 7.2 6.5 6.5 2.5 2.5 5.0 5.0 7.2 7.2 6.5 6.5 2.5 2.5 5.0 5.0 7.2 7.2 7.5 9.5 3.5 4.5 5.0 5.0 0.022 0.033 7.2 7.2 6.5 6.5 2.5 2.5 5.0 5.0 7.2 7.2 6.5 7.5 3.0 3.5 5.0 5.0 7.2 7.2 9.5 10.0 4.5 5.0 5.0 5.0 7.2 11.0 6.0 5.0 0.047 7.2 6.5 2.5 5.0 7.2 6.5 3.0 5.0 7.2 9.5 4.5 5.0 0.068 7.2 6.5 2.5 5.0 7.2 7.5 3.5 5.0 7.2 9.5 4.5 5.0 0.1 0.15 7.2 7.2 6.5 6.5 2.5 3.0 5.0 5.0 7.2 7.2 6.5 7.5 2.5 3.5 5.0 5.0 7.2 7.2 9.5 10.0 4.5 5.0 5.0 5.0 7.2 7.2 11.0 13.0 6.0 7.2 5.0 5.0 0.22 0.33 0.47 7.2 7.2 7.2 7.5 7.5 9.5 3.5 3.5 4.5 5.0 5.0 5.0 7.2 7.2 7.2 7.5 9.5 10.0 3.5 4.5 5.0 5.0 5.0 5.0 7.2 11.0 6.0 5.0 7.2 13.0 7.2 5.0 0.68 1.0 7.2 7.2 10.0 11.0 5.0 6.0 5.0 5.0 7.2 11.0 6.0 5.0 Case Dimensions in Inches 50V * 63V * 100V * 250V * 400V Voltage 50 V DC / 30 V AC 63 V DC / 40 V AC 100 V DC / 63 V AC 250 V DC / 160 V AC 400 V DC / 200 V AC Cap Value in F DimensionsinInches L H T S DimensionsinInches L H T S DimensionsinInches L H T S DimensionsinInches L H T S DimensionsinInches L H T S 0.001 0.0015 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.0022 0.0033 0.0047 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.0068 0.01 0.015 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.283 0.256 0.118 0.197 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.283 0.295 0.138 0.197 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.283 0.374 0.177 0.197 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 0.283 0.283 0.283 0.283 0.283 0.283 0.283 0.283 0.283 0.283 0.283 0.283 0.283 0.283 0.256 0.256 0.295 0.295 0.374 0.394 0.433 0.098 0.118 0.138 0.138 0.177 0.197 0.236 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.283 0.283 0.283 0.283 0.283 0.283 0.283 0.283 0.256 0.256 0.256 0.295 0.295 0.374 0.394 0.433 0.098 0.098 0.098 0.138 0.138 0.177 0.197 0.236 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.256 0.256 0.256 0.295 0.374 0.394 0.433 0.098 0.098 0.118 0.138 0.177 0.197 0.236 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.283 0.283 0.283 0.283 0.283 0.283 0.283 0.256 0.295 0.374 0.374 0.433 0.512 0.512 0.118 0.138 0.177 0.177 0.236 0.283 0.283 0.197 0.283 0.374 0.177 0.197 0.197 0.283 0.394 0.197 0.197 0.197 0.283 0.433 0.236 0.197 0.197 0.197 0.197 0.197 Sharma Film Capacitors MKT 100 SERIES Formerly MKT 1.60 series INTRODUCTION: The MKT 100 Series Metallized Polyester Film Capacitors cover a wide range of values and voltages. These capacitors also have good high frequency characteristics. In addition to some specific applications such as Blocking, By-passing and Coupling, this series is widely used in all General Purpose applications. FEATURES: Wide value and Voltage range Flame retardant case and potting Consistent dimensions and surface finish due to molded case construction Self healing capability * * * * DIMENSIONS AND TOLERANCES: "d" - 0.8 mm (0.032")) "LL'' - 6.0 1.0mm (0.24 0.04") Tolerance on "s" 0.4mm (0.016") PULSE RISE TIME (dv/dt) Volts per sec. GENERAL SPECIFICATIONS: Dissipation factor: 0.0150 at 10K Hz for capacitance 1.0 F 0.0100 at 1 K Hz for capacitance> 1.0 F Insulation resistance: For nominal voltage > 100 V DC, 30,000 M Ohms for C 0.33 F, 10,000 seconds for C> 0.33 F, For nominal voltage 100 V DC, 10,000 M Ohms for C 0.10 F, 1,000 seconds for C> 0.10 F at a temperature of 25 5 C. Capacitance tolerance: 5%(J), 10%(K) and 20%(M). Voltage Test: 1.6 times the rated voltage applied between terminals for 2 seconds at a temperature of 25 5 C. Temperature range: -55 to 100 C with derating above 85 C. Climatic category: F M D RATED LEAD SPACING mm (inches) VOLTAGE 10.0 (0.40) 15.0 (0.60) 22.5 (0.89) 27.5 (1.08) 100 160 6 8 3 5 2 3 1 2 250 11 7 4 3 400 20 10 5.5 5 630 30 15 8 7 1000 60 25 15 10 LIFE TEST DETAILS: Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 C for 1000 hours. After the test: 1. 2. 3. 4. Capacitance change shall remain within 5%. Dissipation Factor shall be within 1.5 times the original limits. Insulation Resistance shall be above 50% of the initial limits. There shall be no remarkable change in the appearance and the marking shall remain legible. Case Dimensions in Millimeters 100V * 160V* 250V* 400V* 630V* 1000V Voltage Cap Value in F 0.001 0.0015 0.0022 0.0033 0.0047 0.0068 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 100 V DC / 63 V AC 160 V DC / 90 V AC 250 V DC / 160 V AC 400 V DC / 200 V AC 630 V DC / 220 V AC 1000 V DC / 250 V AC DimensionsinMillimeters L H T S DimensionsinMillimeters L H T S DimensionsinMillimeters L H T S DimensionsinMillimeters L H T S DimensionsinMillimeters L H T S DimensionsinMillimeters L H T S 13.0 9.0 4.0 10.0 13.0 9.0 4.0 10.0 13.0 9.0 4.0 10.0 13.0 9.0 4.0 10.0 13.0 11.0 5.0 10.0 13.0 12.0 6.0 10.0 18.0 11.0 5.0 15.0 18.0 11.0 5.0 15.0 18.0 13.5 7.5 15.0 26.5 15.0 6.0 22.5 26.5 15.0 6.0 22.5 26.5 16.0 7.0 22.5 26.5 18.5 10.0 22.5 32.0 20.0 11.0 27.5 32.0 22.0 13.0 27.5 13.0 13.0 18.0 18.0 18.0 18.0 26.5 26.5 26.5 32.0 32.0 9.0 11.0 11.0 11.0 12.0 13.5 16.0 17.0 18.5 20.0 22.0 4.0 5.0 5.0 5.0 6.0 7.5 7.0 8.5 10.0 11.0 13.0 10.0 10.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 27.5 27.5 13.0 13.0 13.0 18.0 18.0 18.0 18.0 26.5 26.5 32.0 32.0 9.0 11.0 11.0 11.0 12.0 13.5 14.5 17.0 18.5 20.0 22.0 4.0 5.0 5.0 5.0 6.0 7.5 8.5 8.5 10.0 11.0 13.0 10.0 10.0 10.0 15.0 15.0 15.0 15.0 22.5 22.5 27.5 27.5 13.0 13.0 13.0 18.0 18.0 18.0 18.0 26.5 26.5 26.5 32.0 32.0 32.0 9.0 9.0 9.0 11.0 11.0 11.0 12.0 15.0 16.0 17.0 17.0 20.0 22.0 4.0 4.0 4.0 5.0 5.0 5.0 6.0 6.0 7.0 8.5 9.0 11.0 13.0 10.0 10.0 10.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 27.5 27.5 27.5 13.0 13.0 13.0 18.0 18.0 18.0 18.0 26.5 26.5 26.5 32.0 32.0 9.0 9.0 11.0 11.0 11.0 12.0 13.5 15.0 16.0 17.0 17.0 20.0 4.0 4.0 5.0 5.0 5.0 6.0 7.5 6.0 7.0 8.5 9.0 11.0 10.0 10.0 10.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 27.5 27.5 13.0 13.0 13.0 13.0 13.0 18.0 18.0 18.0 26.5 26.5 26.5 32.0 32.0 9.0 9.0 9.0 11.0 12.0 11.0 12.0 13.5 15.0 16.0 17.0 20.0 22.0 4.0 4.0 4.0 5.0 6.0 5.0 6.0 7.5 6.0 7.0 8.5 11.0 13.0 10.0 10.0 10.0 10.0 10.0 15.0 15.0 15.0 22.5 22.5 22.5 27.5 27.5 Sharma Film Capacitors MKT 100 SERIES CASE DIMENSIONS CONTINUED Case Dimensions in Inches 100V * 160V* 250V* 400V* 630V* 1000V Voltage Cap Value in F 0.001 100 V DC / 63 V AC 160 V DC / 90 V AC 250 V DC / 160 V AC 400 V DC / 200 V AC 630 V DC / 220 V AC DimensionsinInches DimensionsinInches DimensionsinInches DimensionsinInches DimensionsinInches L H T S L H T S L H T S L H T S L H T S 1000 V DC / 250 V AC DimensionsinInches L H T S 0.512 0.354 0.157 0.394 0.0015 0.0022 0.512 0.354 0.157 0.394 0.512 0.354 0.157 0.394 0.0033 0.0047 0.512 0.354 0.157 0.394 0.512 0.354 0.157 0.394 0.512 0.433 0.197 0.394 0.0068 0.001 0.512 0.354 0.157 0.394 0.512 0.472 0.236 0.394 0.512 0.354 0.157 0.394 0.709 0.433 0.197 0.591 0.015 0.022 0.512 0.354 0.157 0.394 0.512 0.433 0.197 0.394 0.709 0.433 0.197 0.591 0.512 0.354 0.157 0.394 0.512 0.472 0.236 0.394 0.709 0.531 0.295 0.591 0.033 0.047 0.512 0.354 0.157 0.394 0.512 0.433 0.197 0.394 0.709 0.433 0.197 0.591 1.043 0.591 0.236 0.886 0.512 0.354 0.157 0.394 0.709 0.433 0.197 0.591 0.709 0.472 0.236 0.591 1.043 0.591 0.236 0.886 0.068 0.512 0.354 0.157 0.394 0.709 0.433 0.197 0.591 0.709 0.531 0.295 0.591 1.043 0.630 0.276 0.886 0.1 0.15 0.512 0.354 0.157 0.394 0.709 0.433 0.197 0.591 0.709 0.472 0.236 0.591 1.043 0.591 0.236 0.886 1.043 0.728 0.394 0.886 0.512 0.354 0.157 0.394 0.512 0.433 0.197 0.394 0.709 0.433 0.197 0.591 0.709 0.531 0.295 0.591 1.043 0.630 0.276 0.886 1.260 0.787 0.433 1.083 0.22 0.33 0.512 0.433 0.197 0.394 0.512 0.433 0.197 0.394 0.709 0.433 0.197 0.591 1.043 0.591 0.236 0.886 1.043 0.669 0.335 0.886 1.260 0.866 0.512 1.083 0.709 0.433 0.197 0.591 0.709 0.433 0.197 0.591 0.709 0.472 0.236 0.591 1.043 0.630 0.276 0.886 1.260 0.787 0.433 1.083 0.47 0.68 0.709 0.433 0.197 0.591 0.709 0.472 0.236 0.591 1.043 0.591 0.236 0.886 1.043 0.669 0.335 0.886 1.260 0.866 0.512 1.083 0.709 0.472 0.236 0.591 0.709 0.531 0.295 0.591 1.043 0.630 0.276 0.886 1.260 0.669 0.354 1.083 1.0 1.5 2.2 3.3 4.7 6.8 0.709 1.043 1.043 1.043 1.260 1.260 0.531 0.630 0.669 0.728 0.787 0.866 0.295 0.276 0.335 0.394 0.433 0.512 0.591 0.886 0.886 0.886 1.083 1.083 0.709 1.043 1.043 1.260 1.260 0.571 0.669 0.728 0.787 0.866 0.335 0.335 0.394 0.433 0.512 0.591 0.886 0.886 1.083 1.083 1.043 1.260 1.260 1.260 0.669 0.669 0.787 0.866 0.335 0.354 0.433 0.512 0.886 1.260 0.787 0.433 1.083 1.083 1.083 1.083 MKT 075 SERIES Formerly MKT 1.67 series INTRODUCTION: The MKT 075 Series Metallized Polyester Film Capacitors are specially designed for use in thickly populated Printed Circuit Boards where miniaturization is important. These capacitors are widely used in all General Purpose applications. FEATURES: Wide value and Voltage range Flame retardant case and potting Consistent dimensions and surface finish due to molded case construction Self healing capability * * * * GENERAL SPECIFICATIONS: Dissipation factor: 0.015 at 10 K Hz for capacitance< 1.0 F Insulation resistance: For nominal voltage 100 V DC, 10,000 M Ohm for C 0.1F, 1,000 seconds for C> 0.1F, For nominal voltage > 100 V DC, 30,000 M Ohm for C 0.33F, 10,000 seconds for C> 0.33F. Capacitance tolerance: 5%(J), 10%(K)and 10%(M) Voltage Test : 1.6 times the rated voltage applied between terminals for 2 seconds. at temperature of 25 5 C Temperature range: -55 to 100 C with derating above 85 C Climatic category: F M D LIFE TEST DETAILS: Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 C for 1000 hours. After the test: 1. 2. 3. 4. Capacitance change shall remain within 5%. Dissipation Factor shall be within 1.5 times the original limits. Insulation Resistance shall be above 50% of the initial limits. There shall be no remarkable change in the appearance and the marking shall remain legible. DIMENSIONS AND TOLERANCES: "d" - 0.6 mm (0.024") for dimension "T" = 4mm (0.160") "d" - 0.8 mm (0.032") for dimension "T" > 4mm (0.160") "LL'' - 6.0 1.0mm (0.24 0.04") Tolerance on "s" 0.4mm (0.016") PULSE RISE TIME (dv/dt) RATED VOLTAGE Volts per sec. dv/dt per VoltsSeconds 100 6 250 15 400 30 630 40 Sharma Film Capacitors MKT 075 SERIES CASE DIMENSIONS Case Dimensions in Millimeters100V * 250V VOLTAGE 100 V DC / 63 V AC Capacitance in F Dimensions in Millimeters L 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 10.5 10.5 10.5 10.5 10.5 10.5 10.5 F 4.0 4.0 4.0 4.0 4.0 5.0 6.0 S 7.5 7.5 7.5 7.5 7.5 7.5 7.5 Dimensions in Millimeters L H T S 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 9.0 9.0 9.0 9.0 9.0 11.0 11.0 12.0 4.0 4.0 4.0 4.0 4.0 5.0 5.0 6.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 DC/AC 630 V DC / 250 V AC Dimensions in Millimeters L 0.001 0.0015 0.0022 0.0033 0.0047 0.0068 0.01 0.015 0.022 0.033 9.0 9.0 9.0 9.0 9.0 11.0 12.0 T VOLTAGE 400 V DC / 200 V AC Capacitance in H 10.5 10.5 10.5 10.5 10.5 10.5 H 9.0 9.0 9.0 9.0 11.0 12.0 T 4.0 4.0 4.0 4.0 5.0 6.0 S 7.5 7.5 7.5 7.5 7.5 7.5 Case Dimensions in Inches 100V * 250V DC/AC 250 V DC / 160 V AC Dimensions in Millimeters L H T S 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 9.0 9.0 9.0 9.0 9.0 9.0 11.0 12.0 4.0 4.0 4.0 4.0 4.0 4.0 5.0 6.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 VOLTAGE 100 V DC / 63 V AC Capacitance in F Dimensions in Inches L 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 H 0.413 0.413 0.413 0.413 0.413 0.413 0.413 F S 0.157 0.157 0.157 0.157 0.157 0.197 0.236 0.295 0.295 0.295 0.295 0.295 0.295 0.295 L H T S 0.413 0.413 0.413 0.413 0.413 0.413 0.413 0.413 0.354 0.354 0.354 0.354 0.354 0.433 0.433 0.472 0.157 0.157 0.157 0.157 0.157 0.197 0.197 0.236 0.295 0.295 0.295 0.295 0.295 0.295 0.295 0.295 DC/AC 630 V DC / 250 V AC Dimensions in Inches L 0.001 0.0015 0.0022 0.0033 0.0047 0.0068 0.01 0.015 0.022 0.033 0.354 0.354 0.354 0.354 0.354 0.433 0.472 Dimensions in Inches T VOLTAGE 400 V DC / 200 V AC Capacitance in DC/AC 250 V DC / 160 V AC H 0.413 0.413 0.413 0.413 0.413 0.413 0.354 0.354 0.354 0.354 0.433 0.472 Dimensions in Inches T S 0.157 0.157 0.157 0.157 0.197 0.236 0.295 0.295 0.295 0.295 0.295 0.295 L H T S 0.413 0.413 0.413 0.413 0.413 0.413 0.413 0.413 0.354 0.354 0.354 0.354 0.354 0.354 0.433 0.472 0.157 0.157 0.157 0.157 0.157 0.157 0.197 0.236 0.295 0.295 0.295 0.295 0.295 0.295 0.295 0.295 MKTD01 SERIES Formerly MPD 1 series INTRODUCTION: The MKTD01 Series Metallized Polyester Film Capacitors cover a wide range of values and voltages. They are suitable for applications such as Blocking, By-passing and Coupling and are widely used in General communication equipment. FEATURES: value and Voltage range * Wide healing capability * Self retardant powder epoxy encapsulation * Flame * Minimum overall dimensions due to dip coated construction GENERAL SPECIFICATIONS: Dissipation factor: < 0.0100 at 1 K Hz for capacitance 1.0 F, < 0.0150 at 1 K Hz for capacitance> 1.0 F. Insulation resistance: For 100 VDC rated parts; 9,000 M Ohms for C 0.33 F, 3,000 seconds for C> 0.33 F, at a temperature of 25 5 C, For 250 to 630 VDC; rated parts 15,000 M Ohms for C 0.33 F, 5,000 seconds for C> 0.33 F, at a temperature of 25 5 C. Capacitance tolerance: 5%(J),10%(K) and 20%(M) (Special parts with close tolerance of 1% and 2% available on request) Voltage Test : 1.6 times the rated voltage applied between terminals for 2 seconds. at a temperature of 25 5 C Temperature range: -55 to 85 .C Climatic category: F M F LIFE TEST DETAILS: Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 C for 1000 hours. After the test: 1. Capacitance change shall remain within 5%. 2. Dissipation Factor shall be within 1.5 times the original limits. 3. Insulation Resistance shall be above 50% of the initial limits. 4. There shall be no remarkable change in the appearance and the marking shall remain legible. DIMENSIONS AND TOLERANCES: d - 0.6 mm (0.024") for Lead Spacing "s" = 10.0 mm (0.40") d - 0.8 mm (0.032") for Lead Spacing "s" > 10.0 mm (0.40") z - 1.5mm ( 0.06" ) max. LL'' - 20.0 mm min.(0.78") Tolerance on "s" 1.0mm (0.04") PULSE RISE TIME (dv/dt) Volts per sec. LEAD SPACING mm (inches) Rated 10.0 15.0 22.5 27.0 Voltage (0.40) (0.60) (0.89) (1.06) 100 6 3 2 1 250 11 7 4 3 400 20 10 5.5 5 630 30 15 8 7 Sharma Film Capacitors MKTD01 SERIES CASE DIMENSIONS Case Dimensions in Millimeters 100V * 250V * 400V * 630V VOLTAGE 100 V DC / 63 V AC Capacitance in F Dimensions in Millimeters L 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 12.5 12.5 12.5 18.0 18.0 18.0 18.0 26.0 26.0 26.0 31.0 31.0 F 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 9.5 10.0 10.0 10.5 11.5 12.0 14.0 14.0 16.0 19.0 23.0 25.0 T 5.0 5.0 5.5 5.5 6.0 6.5 7.5 7.5 9.0 11.0 12.0 14.0 S 10.0 10.0 10.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 27.0 27.0 VOLTAGE 400 V DC / 200 V AC Capacitance in H Case Dimensions in Inches 100V * 250V * 400V * 630V DC/AC 250 V DC / 160 V AC Dimensions in Millimeters L H T S 12.5 12.5 12.5 12.5 12.5 12.5 12.5 18.0 18.0 18.0 26.0 26.0 26.0 31.0 31.0 31.0 31.0 8.5 9.0 9.0 9.0 9.5 9.5 10.0 10.5 11.5 12.5 12.5 14.5 16.0 17.0 19.0 23.0 27.0 4.5 4.5 4.5 4.5 5.0 5.0 5.5 5.5 6.5 7.0 7.0 8.0 9.0 9.5 11.5 14.0 16.5 10.0 10.0 10.0 10.0 10.0 10.0 10.0 15.0 15.0 15.0 22.5 22.5 22.5 27.0 27.0 27.0 27.0 DC/AC 630 V DC / 220 V AC Dimensions in Millimeters Dimensions in Millimeters L H T S L H T S 12.5 12.5 12.5 12.5 12.5 18.0 18.0 26.0 26.0 26.0 26.0 31.0 31.0 31.0 31.0 9.0 9.5 9.5 10.5 10.5 10.5 11.5 12.5 13.5 15.5 18.0 17.5 20.0 23.5 26.0 4.5 4.5 5.0 5.5 6.0 6.0 6.5 6.0 7.0 8.5 9.5 10.0 12.0 13.5 16.5 10.0 10.0 10.0 10.0 10.0 15.0 15.0 22.5 22.5 22.5 22.5 27.0 27.0 27.0 27.0 12.5 12.5 12.5 18.0 18.0 18.0 26.0 26.0 26.0 31.0 31.0 31.0 31.0 9.0 9.5 10.5 11.0 11.5 12.5 13.0 14.0 16.5 17.5 19.5 22.5 27.5 4.5 5.0 6.0 6.0 6.5 7.0 7.0 8.5 10.0 10.5 12.0 15.0 19.0 10.0 10.0 10.0 15.0 15.0 15.0 22.5 22.5 22.5 27.0 27.0 27.0 27.0 VOLTAGE 100 V DC / 63 V AC Capacitance in F Dimensions in Inches L 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 0.374 0.394 0.394 0.413 0.453 0.472 0.551 0.551 0.630 0.748 0.906 0.984 T Dimensions in Inches S 0.197 0.197 0.217 0.217 0.236 0.256 0.295 0.295 0.354 0.433 0.472 0.551 0.394 0.394 0.394 0.591 0.591 0.591 0.591 0.886 0.886 0.886 1.063 1.063 VOLTAGE 400 V DC / 200 V AC F 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 H 0.492 0.492 0.492 0.709 0.709 0.709 0.709 1.024 1.024 1.024 1.220 1.220 Capacitance in DC/AC 250 V DC / 160 V AC L H T S 0.492 0.492 0.492 0.492 0.492 0.492 0.492 0.709 0.709 0.709 1.024 1.024 1.024 1.220 1.220 1.220 1.220 0.335 0.354 0.354 0.354 0.374 0.374 0.394 0.413 0.453 0.492 0.492 0.571 0.630 0.669 0.748 0.906 1.063 0.177 0.177 0.177 0.177 0.197 0.197 0.217 0.217 0.256 0.276 0.276 0.315 0.354 0.374 0.453 0.551 0.650 0.394 0.394 0.394 0.394 0.394 0.394 0.394 0.591 0.591 0.591 0.886 0.886 0.886 1.063 1.063 1.063 1.063 DC/AC 630 V DC / 220 V AC Dimensions in Inches Dimensions in Inches L H T S L H T S 0.492 0.492 0.492 0.492 0.492 0.709 0.709 1.024 1.024 1.024 1.024 1.220 1.220 1.220 1.220 0.354 0.374 0.374 0.413 0.413 0.413 0.453 0.492 0.531 0.610 0.709 0.689 0.787 0.925 1.024 0.177 0.177 0.197 0.217 0.236 0.236 0.256 0.236 0.276 0.335 0.374 0.394 0.472 0.531 0.650 0.394 0.394 0.394 0.394 0.394 0.591 0.591 0.886 0.886 0.886 0.886 1.063 1.063 1.063 1.063 0.492 0.492 0.492 0.709 0.709 0.709 1.024 1.024 1.024 1.220 1.220 1.220 1.220 0.354 0.374 0.413 0.433 0.453 0.492 0.512 0.551 0.650 0.689 0.768 0.886 1.083 0.177 0.197 0.236 0.236 0.256 0.276 0.276 0.335 0.394 0.413 0.472 0.591 0.748 0.394 0.394 0.394 0.591 0.591 0.591 0.886 0.886 0.886 1.063 1.063 1.063 1.063 MKT D02 SERIES Formerly MPD 2 series INTRODUCTION: The MKTD02 Series Metallized Polyester Film Capacitors cover a wide range of values and voltages. This series has lead spacing starting from 7.5mm. and covers more values than the conventional series. They are suitable for applications such as Blocking, Bypassing and Coupling and are widely used in General communication equipment. FEATURES: Wide value and Voltage range Self healing capability Flame retardant powder epoxy encapsulation Minimum overall dimensions due to dip coated construction * * * * GENERAL SPECIFICATIONS: DIMENSIONS AND TOLERANCES: d - 0.6 mm (0.024") for Lead Spacing "s" = 10.0 mm (0.40") d - 0.8 mm (0.032") for Lead Spacing "s" > 10.0 mm (0.40") z - 1.5mm ( 0.06" ) max. LL'' - 20.0 mm min.(0.78") Tolerance on "s" 1.0mm (0.04") Dissipation factor: < 0.0100 at 1 K Hz for capacitanc e 1.0 F, < 0.0150 at 1 K Hz PULSE RISE TIME (dv/dt) Volts per sec. for capacitance> 1.0 F.Insulation resistance: For 100 VDC rated parts; LEAD SPACING mm (inches) 9,000 M Ohms for C 0.33 F, 3,000 seconds for C> 0.33 F at a temperature of Rated 7.5 10.0 15.0 22.5 25 5 C. For 250 to 630 VDC rated parts ; 15,000 M Ohms for C 0.33 F, Voltage (0.30) (0.40) (0.60) (0.89) 5,000 seconds for C> 0.33 F at a temperature of 25 5 C. 100 6 6 3 2 Capacitance tolerance: 5%(J), 10%(K) and 20%(M) Voltage Test : 1.6 times the 250 15 11 7 4 rated voltage applied between terminals for 2 seconds. at a temperature of 25 5 C. 400 30 20 10 5.5 Temperature range: -55 to 85 C Climatic category: F M F 630 40 30 15 LIFE TEST DETAILS: Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 C for 1000 hours. After the test: 1. 2. 3. 4. Capacitance change shall remain within 5%. Dissipation Factor shall be within 1.5 times the original limits. Insulation Resistance shall be above 50% of the initial limits. There shall be no remarkable change in the appearance and the marking shall remain legible. 8 27.5 (1.08) 1 3 5 7 Sharma Film Capacitors MKT D02 SERIES CASE DIMENSIONS Case Dimensions in Millimeters 100V * 250V * 400V * 630V VOLTAGE 100 V DC / 63 V AC Capacitance in F 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 8.5 9.0 9.0 9.5 9.5 10.0 10.5 11.0 10.5 11.0 11.5 12.0 13.0 14.0 14.0 15.0 16.0 17.5 18.5 T 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 5.0 5.5 4.5 5.0 5.5 6.0 6.5 7.0 5.5 6.0 6.5 7.0 7.5 8.5 8.5 9.0 10.0 10.5 11.0 S 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 10.0 10.0 10.0 10.0 10.0 10.0 15.0 15.0 15.0 15.0 15.0 15.0 17.5 17.5 17.5 17.5 17.5 VOLTAGE 400 V DC / 200 V AC F 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 H 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 13.0 13.0 13.0 13.0 13.0 13.0 18.0 18.0 18.0 18.0 18.0 18.0 21.0 21.0 21.0 21.0 21.0 CAPACITANCE in DC/AC 250 V DC / 160 V AC Dimensions in Millimeters L Case Dimensions in Inches 100V * 250V * 400V * 630V Dimensions in Millimeters L H T S 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 13.0 13.0 18.0 18.0 18.0 18.0 18.0 18.0 21.0 21.0 21.0 21.0 21.0 29.0 29.0 29.0 29.0 29.0 29.0 29.0 29.0 7.5 8.0 8.0 8.0 8.0 8.5 9.0 9.0 9.5 10.0 9.5 10.5 11.0 11.5 12.0 12.5 11.5 12.0 12.5 13.5 14.5 14.0 15.0 15.5 18.5 19.5 20.5 21.5 22.5 5.0 4.5 4.5 4.5 4.5 5.0 5.5 5.5 5.5 6.0 5.5 5.5 6.0 6.5 7.0 7.5 6.5 7.0 8.0 8.0 8.0 7.5 8.0 9.0 9.0 9.5 10.5 12.0 13.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 10.0 10.0 15.0 15.0 15.0 15.0 15.0 15.0 17.5 17.5 17.5 17.5 17.5 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 DC/AC 630 V DC / 220 V AC Dimensions in Millimeters Dimensions in Millimeters L H T S L H T S 10.5 10.5 10.5 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 29.0 29.0 29.0 29.0 29.0 29.0 29.0 7.5 8.0 8.0 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 11.0 11.5 12.0 13.0 14.5 15.0 16.0 15.0 16.0 16.5 19.5 20.5 21.5 23.0 5.0 4.5 4.5 4.5 4.5 5.0 5.5 6.0 6.5 7.0 7.5 6.0 6.5 7.0 8.0 8.0 8.5 9.5 8.5 9.5 10.0 10.0 11.0 12.0 13.0 7.5 7.5 7.5 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 17.5 17.5 17.5 17.5 17.5 17.5 17.5 25.0 25.0 25.0 25.0 25.0 25.0 25.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 29.0 29.0 29.0 29.0 31.0 31.0 31.0 8.5 8.5 9.0 9.5 10.5 10.5 11.0 10.5 11.0 11.5 12.0 12.5 14.5 15.5 14.0 15.5 16.0 18.5 19.0 20.0 21.0 5.0 4.5 5.0 5.5 5.5 6.5 7.0 6.0 6.0 6.5 7.0 8.0 8.5 9.0 8.5 9.0 9.0 9.0 9.5 10.5 11.5 15.0 15.0 15.0 15.0 15.0 15.0 15.0 17.5 17.5 17.5 17.5 17.5 17.5 17.5 25.0 25.0 25.0 25.0 27.5 27.5 27.5 VOLTAGE 100 V DC / 63 V AC CAPACITANCE in F L 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 0.295 0.295 0.295 0.295 0.295 0.295 0.295 0.295 0.295 0.335 0.354 0.354 0.374 0.374 0.394 0.413 0.433 0.413 0.433 0.453 0.472 0.512 0.551 0.551 0.591 0.630 0.689 0.728 T 0.177 0.177 0.177 0.177 0.177 0.177 0.177 0.177 0.177 0.197 0.217 0.177 0.197 0.217 0.236 0.256 0.276 0.217 0.236 0.256 0.276 0.295 0.335 0.335 0.354 0.394 0.413 0.433 Dimensions in Inches S 0.295 0.295 0.295 0.295 0.295 0.295 0.295 0.295 0.295 0.295 0.295 0.394 0.394 0.394 0.394 0.394 0.394 0.591 0.591 0.591 0.591 0.591 0.591 0.689 0.689 0.689 0.689 0.689 VOLTAGE 400 V DC / 200 V AC F 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 H 0.413 0.413 0.413 0.413 0.413 0.413 0.413 0.413 0.413 0.413 0.413 0.512 0.512 0.512 0.512 0.512 0.512 0.709 0.709 0.709 0.709 0.709 0.709 0.827 0.827 0.827 0.827 0.827 CAPACITANCE in DC/AC 250 V DC / 160 V AC Dimensions in Inches L H T S 0.413 0.413 0.413 0.413 0.413 0.413 0.413 0.413 0.512 0.512 0.709 0.709 0.709 0.709 0.709 0.709 0.827 0.827 0.827 0.827 0.827 1.142 1.142 1.142 1.142 1.142 1.142 1.142 1.142 0.295 0.315 0.315 0.315 0.315 0.335 0.354 0.354 0.374 0.394 0.374 0.413 0.433 0.453 0.472 0.492 0.453 0.472 0.492 0.531 0.571 0.551 0.591 0.610 0.728 0.768 0.807 0.846 0.886 0.197 0.177 0.177 0.177 0.177 0.197 0.217 0.217 0.217 0.236 0.217 0.217 0.236 0.256 0.276 0.295 0.256 0.276 0.315 0.315 0.315 0.295 0.315 0.354 0.354 0.374 0.413 0.472 0.512 0.295 0.295 0.295 0.295 0.295 0.295 0.295 0.295 0.394 0.394 0.591 0.591 0.591 0.591 0.591 0.591 0.689 0.689 0.689 0.689 0.689 0.984 0.984 0.984 0.984 0.984 0.984 0.984 0.984 DC/AC 630 V DC / 220 V AC Dimensions in Inches Dimensions in Inches L H T S L H T S 0.413 0.413 0.413 0.709 0.709 0.709 0.709 0.709 0.709 0.709 0.709 0.827 0.827 0.827 0.827 0.827 0.827 0.827 1.142 1.142 1.142 1.142 1.142 1.142 1.142 0.295 0.315 0.315 0.315 0.335 0.354 0.374 0.394 0.413 0.433 0.453 0.433 0.453 0.472 0.512 0.571 0.591 0.630 0.591 0.630 0.650 0.768 0.807 0.846 0.906 0.197 0.177 0.177 0.177 0.177 0.197 0.217 0.236 0.256 0.276 0.295 0.236 0.256 0.276 0.315 0.315 0.335 0.374 0.335 0.374 0.394 0.394 0.433 0.472 0.512 0.295 0.295 0.295 0.591 0.591 0.591 0.591 0.591 0.591 0.591 0.591 0.689 0.689 0.689 0.689 0.689 0.689 0.689 0.984 0.984 0.984 0.984 0.984 0.984 0.984 0.709 0.709 0.709 0.709 0.709 0.709 0.709 0.827 0.827 0.827 0.827 0.827 0.827 0.827 1.142 1.142 1.142 1.142 1.220 1.220 1.220 0.335 0.335 0.354 0.374 0.413 0.413 0.433 0.413 0.433 0.453 0.472 0.492 0.571 0.610 0.551 0.610 0.630 0.728 0.748 0.787 0.827 0.197 0.177 0.197 0.217 0.217 0.256 0.276 0.236 0.236 0.256 0.276 0.315 0.335 0.354 0.335 0.354 0.354 0.354 0.374 0.413 0.453 0.591 0.591 0.591 0.591 0.591 0.591 0.591 0.689 0.689 0.689 0.689 0.689 0.689 0.689 0.984 0.984 0.984 0.984 1.083 1.083 1.083 Sharma Film Capacitors MKT D03 SERIES Formerly MPD 3 series INTRODUCTION: The MKTD03 Series Metallized Polyester Film Capacitors cover a wide range of values and voltages. This series provides alternative dimensions for the same values covered by the other MKTD series. These capacitors are suitable for applications such as Blocking, By-passing and Coupling and are widely used in General communication equipment. FEATURES: Wide value and Voltage range Self healing capability Flame retardant powder epoxy encapsulation Minimum overall dimensions due to dip coated construction * * * * GENERAL SPECIFICATIONS: Dissipation factor: < 0.0100 at 1 K Hz for capacitance 1.0 F, < 0.0150 at 1 K Hz for capacitance> 1.0 F. Insulation resistance: For 100 VDC rated parts; 9,000 M Ohms for C 0.33 F, 3,000 seconds for C> 0.33 F at a temperature of 25 5 C. For 250 to 630 VDC rated parts; 15,000 M Ohms for C 0.33 F, 5,000 seconds for C> 0.33 F at a temperature of 25 5 C Capacitance tolerance: 5%(J), 10%(K) and 20%(M). Voltage Test : 1.6 times the rated voltage applied between terminals for 2 seconds. at a temperature of 25 5 C. Temperature range: -55 to 85 C. Climatic category: F M F DIMENSIONS AND TOLERANCES: d - 0.6 mm (0.024") for Lead Spacing "s" = 10.0 mm (0.40") d - 0.8 mm (0.032") for Lead Spacing "s" > 10.0 mm (0.40") z - 1.5mm ( 0.06" ) max. LL'' - 20.0 mm min.(0.78") Tolerance on "s" 1.0mm (0.04") for s 15mm(0.6"). Tolerance on "s" 1.5mm (0.06") for s 20mm(0.78"). Tolerance on "s" 2.0mm (0.08") for s 27.5mm(1.08"). PULSE RISE TIME (dv/dt) Volts per sec. LEAD SPACING mm (inches) Rated 10.0 15.0 22.5 27.0 Voltage (0.40) (0.60) (0.89) (1.06) 100 6 3 2 1 250 11 7 4 3 400 20 10 5.5 5 630 30 15 8 7 LIFE TEST DETAILS: Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 C for 1000 hours. After the test: 1. 2. 3. 4. Capacitance change shall remain within 5%. Dissipation Factor shall be within 1.5 times the original limits. Insulation Resistance shall be above 50% of the initial limits. There shall be no remarkable change in the appearance and the marking shall remain legible. Case Dimensions in Inches 100V * 250V * 400V * 630V Case Dimensions in Millimeters 100V * 250V * 400V * 630V VOLTAGE 100 V DC / 63 V AC Capacitance in F 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 Dimensions in Millimeters L H T S L H T S 10.0 10.0 10.0 10.0 10.0 11.0 12.5 12.5 12.5 14.0 15.0 13.5 16.5 19.0 21.0 22.0 23.5 24.0 26.0 5.5 6.0 6.0 6.0 6.0 6.5 7.0 8.0 8.0 9.0 10.0 8.0 9.5 11.5 12.5 13.0 14.0 15.5 21.5 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 15.0 15.0 15.0 20.0 20.0 27.5 27.5 27.5 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 18.0 18.0 18.0 24.0 24.0 24.0 30.0 30.0 33.0 33.0 10.0 10.0 10.0 10.0 10.0 11.0 12.5 12.5 13.0 14.0 16.0 14.0 18.0 23.0 23.0 24.0 24.0 26.0 5.5 6.0 6.0 6.0 6.0 6.5 7.0 8.0 7.0 8.0 9.5 9.5 10.5 13.5 13.5 16.5 18.0 20.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 15.0 15.0 15.0 20.0 20.0 20.0 27.5 27.5 30.0 30.0 VOLTAGE 400 V DC / 200 V AC F 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 Dimensions in Millimeters 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.5 13.5 18.0 18.0 18.0 24.0 24.0 30.0 30.0 30.0 Capacitance in DC/AC 250 V DC / 160 V AC DC/AC 630 V DC / 220 V AC Dimensions in Millimeters Dimensions in Millimeters L H T S L H T S 13.0 13.0 13.0 13.0 13.0 13.0 18.0 18.0 18.0 18.0 24.0 30.0 30.0 30.0 33.0 33.0 10.0 10.0 10.0 11.0 11.5 12.5 11.0 14.0 16.5 16.5 17.5 18.0 21.5 24.0 26.0 28.0 5.5 6.0 6.0 6.5 7.0 7.0 6.0 8.0 9.5 10.0 10.5 10.5 12.0 14.0 18.0 21.0 10.0 10.0 10.0 10.0 10.0 10.0 15.0 15.0 15.0 15.0 20.0 27.5 27.5 27.5 30.0 30.0 13.0 13.0 13.0 18.0 18.0 18.0 18.0 18.0 24.0 24.0 30.0 30.0 30.0 33.0 10.5 11.0 11.0 10.0 11.0 12.0 15.0 15.5 16.5 18.0 22.0 23.5 25.5 28.0 6.0 6.5 6.5 6.5 7.0 8.0 8.5 11.0 10.5 12.0 12.5 14.0 15.0 20.0 10.0 10.0 10.0 15.0 15.0 15.0 15.0 15.0 20.0 20.0 27.5 27.5 27.5 30.0 VOLTAGE 100 V DC / 63 V AC Capacitance in F 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 Dimensions in Inches H T S L H T S 0.512 0.512 0.512 0.512 0.512 0.512 0.512 0.512 0.512 0.531 0.531 0.709 0.709 0.709 0.945 0.945 1.181 1.181 1.181 0.394 0.394 0.394 0.394 0.394 0.433 0.492 0.492 0.492 0.551 0.591 0.531 0.650 0.748 0.827 0.866 0.925 0.945 1.024 0.217 0.236 0.236 0.236 0.236 0.256 0.276 0.315 0.315 0.354 0.394 0.315 0.374 0.453 0.492 0.512 0.551 0.610 0.846 0.394 0.394 0.394 0.394 0.394 0.394 0.394 0.394 0.394 0.394 0.394 0.591 0.591 0.591 0.787 0.787 1.083 1.083 1.083 0.512 0.512 0.512 0.512 0.512 0.512 0.512 0.512 0.709 0.709 0.709 0.945 0.945 0.945 1.181 1.181 1.299 1.299 0.394 0.394 0.394 0.394 0.394 0.433 0.492 0.492 0.512 0.551 0.630 0.551 0.709 0.906 0.906 0.945 0.945 1.024 0.217 0.236 0.236 0.236 0.236 0.256 0.276 0.315 0.276 0.315 0.374 0.374 0.413 0.531 0.531 0.650 0.709 0.787 0.394 0.394 0.394 0.394 0.394 0.394 0.394 0.394 0.591 0.591 0.591 0.787 0.787 0.787 1.083 1.083 1.181 1.181 VOLTAGE 400 V DC / 200 V AC F 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 Dimensions in Inches L Capacitance in DC/AC 250 V DC / 160 V AC DC/AC 630 V DC / 220 V AC Dimensions in Inches Dimensions in Inches L H T S L H T S 0.512 0.512 0.512 0.512 0.512 0.512 0.709 0.709 0.709 0.709 0.945 1.181 1.181 1.181 1.299 1.299 0.394 0.394 0.394 0.433 0.453 0.492 0.433 0.551 0.650 0.650 0.689 0.709 0.846 0.945 1.024 1.102 0.217 0.236 0.236 0.256 0.276 0.276 0.236 0.315 0.374 0.394 0.413 0.413 0.472 0.551 0.709 0.827 0.394 0.394 0.394 0.394 0.394 0.394 0.591 0.591 0.591 0.591 0.787 1.083 1.083 1.083 1.181 1.181 0.512 0.512 0.512 0.709 0.709 0.709 0.709 0.709 0.945 0.945 1.181 1.181 1.181 1.299 0.413 0.433 0.433 0.394 0.433 0.472 0.591 0.610 0.650 0.709 0.866 0.925 1.004 1.102 0.236 0.256 0.256 0.256 0.276 0.315 0.335 0.433 0.413 0.472 0.492 0.551 0.591 0.787 0.394 0.394 0.394 0.591 0.591 0.591 0.591 0.591 0.787 0.787 1.083 1.083 1.083 1.181 Sharma Film Capacitors MKTD04 SERIES Features - Very small size, Epoxy coating, Flame retardant to UL94V-0 7.5mm Lead spacing. - Self-healing metallized polyester dielectric, Non-inductive construction. - High performance and efficiencies. Custom values, voltages, and case sizes available upon request. Application - Multi-purpose - Blocking & coupling - By-passing & Filtering, Timing Specifications Capacitance Range Operating temperature Rated Voltage Capacitance Tolerance Tangent of Loss Angle Insulation Resistance Voltage Test Endurance Damp Heat Construction Lead Material Color of Body Markings 0.001F to 1.0F -40 to +85C (up to 100C - derate voltage 1.25% per C ) 50/63, 100, 250, 400, 630, 1000V dc 2(G), 5(J), 10(K) % 0.008 or LESS (at 1KHz +25C) Voltage Charge : 1 min at +25C, 5C 50 Vdc for Vr<100Vdc, 100Vdc for Vr100Vdc 9,000 or more, c0.33f 5000S or more c>0.33f 1.6 x Vr applied for 2sec +25C, 5C (Between Terminal) +85C, 2C, 1.25 x Vr, 1000Hr Cap Change: < 5%, DF Change : <50x10 at 1khz Insulation Resistance: <50% of limit value +40C2C, 93% 2%, 21days Cap Change: < 5%, DF Change : <50x10 at 1khz Insulation Resistance: <50% of limit value Non-inductive wound metallized polyester film Epoxy dipped encasement, Flame retardant to UL94V-0 Solder coated or Tinned solid wire Orange/Brown Capacitance, Tolerance, Voltage When space permits, Capacitor Type will be marked - Special size or items on request. - Tolerance Dimension 0.5 mm. Tel: (949) 642-7324 SECI Engineers & Buyers' Guide Fax: (949) 642- 7327 Sharma Film Capacitors Capacitance 50/63DC F code Tmax Hmax Wmax P 0.0010 102 3.0 5.0 9.3 7.5 0.0012 122 3.0 5.0 9.3 7.5 0.0015 152 3.0 5.0 9.3 7.5 0.0018 182 3.0 5.0 9.3 7.5 0.0022 222 3.0 5.0 9.3 7.5 0.0027 272 3.0 5.0 9.3 7.5 0.0033 332 3.0 5.0 9.3 7.5 0.0039 392 3.0 5.0 9.3 7.5 0.0047 472 3.0 5.0 9.3 7.5 0.0056 562 3.0 5.0 9.3 7.5 0.0068 682 3.0 5.0 9.3 7.5 0.0082 822 3.0 5.0 9.3 7.5 0.010 103 3.0 5.0 9.3 7.5 0.012 123 3.0 5.0 9.3 7.5 0.015 153 3.0 5.0 9.3 7.5 0.018 183 3.0 5.0 9.3 7.5 0.022 223 3.0 5.0 9.3 7.5 0.027 273 3.0 5.0 9.3 7.5 0.033 333 3.0 5.2 9.3 7.5 0.039 393 3.0 5.2 9.3 7.5 0.047 473 3.0 5.2 9.3 7.5 0.056 563 3.0 5.2 9.3 7.5 0.068 683 3.0 5.2 9.3 7.5 0.082 823 3.0 5.2 9.3 7.5 0.10 104 3.0 5.2 9.3 7.5 0.12 124 3.0 5.5 9.3 7.5 0.15 154 3.0 6.0 9.3 7.5 0.18 184 3.3 6.5 9.3 7.5 0.22 224 3.5 6.5 9.3 7.5 0.27 274 4.0 7.0 9.3 7.5 0.33 334 4.0 7.5 9.3 7.5 0.39 394 4.5 7.8 9.3 7.5 0.47 474 4.8 8.0 9.3 7.5 0.56 564 5.0 9.0 9.3 7.5 0.68 684 5.2 9.2 9.3 7.5 0.82 824 5.8 10.8 9.3 7.5 1.0 105 5.8 10.8 9.3 7.5 Tel: (949) 642-7324 d 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 Tmax 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.3 3.5 4.0 4.0 4.5 4.8 5.0 5.2 5.8 5.8 100VDC Hmax Wmax P 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.2 9.3 7.5 5.2 9.3 7.5 5.2 9.3 7.5 5.2 9.3 7.5 5.2 9.3 7.5 5.2 9.3 7.5 5.2 9.3 7.5 5.5 9.3 7.5 6.0 9.3 7.5 6.5 9.3 7.5 6.5 9.3 7.5 7.0 9.3 7.5 7.5 9.3 7.5 7.8 9.3 7.5 8.0 9.3 7.5 9.0 9.3 7.5 9.2 9.3 7.5 10.8 9.3 7.5 10.8 9.3 7.5 SECI Engineers & Buyers' Guide d Tmax 0.6 3.0 0.6 3.0 0.6 3.0 0.6 3.0 0.6 3.0 0.6 3.0 0.6 3.0 0.6 3.0 0.6 3.0 0.6 3.0 0.6 3.0 0.6 3.0 0.6 3.0 0.6 3.0 0.6 3.0 0.6 3.0 0.6 3.0 0.6 3.0 0.6 3.0 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 - 250VDC Hmax Wmax P 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.2 9.3 7.5 - d 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 - Fax: (949) 642- 7327 Sharma Film Capacitors Capacitance 400V DC F code Tmax Hmax Wmax P 0.0010 102 3.0 5.0 9.3 7.5 0.0012 122 3.0 5.0 9.3 7.5 0.0015 152 3.0 5.0 9.3 7.5 0.0018 182 3.0 5.0 9.3 7.5 0.0022 222 3.0 5.0 9.3 7.5 0.0027 272 3.0 5.0 9.3 7.5 0.0033 332 3.0 5.0 9.3 7.5 0.0039 392 3.0 5.0 9.3 7.5 0.0047 472 3.0 5.0 9.3 7.5 0.0056 562 3.0 5.0 9.3 7.5 0.0068 682 3.0 5.0 9.3 7.5 0.0082 822 7.5 0.010 103 0.012 123 0.015 153 0.018 183 0.022 223 0.027 273 0.033 333 0.039 393 0.047 473 0.056 563 0.068 683 0.082 823 0.10 104 0.12 124 0.15 154 0.18 184 0.22 224 0.27 274 0.33 334 0.39 394 0.47 474 0.56 564 0.68 684 0.82 824 1.0 105 - Tel: (949) 642-7324 d 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 - Tmax 3.0 3.0 3.0 3.0 3.0 - 630V DC Hmax Wmax P 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 - SECI Engineers & Buyers' Guide d 0.6 0.6 0.6 0.6 0.6 - 1000V DC Tmax Hmax Wmax P d 3.0 5.0 9.3 7.5 0.6 3.0 5.0 9.3 7.5 0.6 3.0 5.0 9.3 7.5 0.6 - Fax: (949) 642- 7327 Sharma Film Capacitors Taping Specifications For Automatic Insertion Description Symbol Lead wire diameter Taping pitch Sprocket hole pitch Centering of the lead wire Centering of the body Lead spacing Component alignment Height from sprocket hole Height Center to the comp body Tape width Width of adhesive tape Sprocket hole alignment Position of adhesive tape Sprocket hole diameter Tape thickness d P P0 P P2 F h H1 H L W W0 W1 W2 D0 T Dimensions (mm) Lead Spacing 7.5mm 0.6 12.7 12.7 3.75 0 7.5 0 20.0 16.0 11.0 18.0 13.0 9.0 3max 4.0 0.7 Toll 0.05 0.1 0.2 0.5 0.8 2.0 0.5 0.5 0.5 +1.0-0.5 0.5 0.5 0.2 0.2 Standard Packing Quantity For Box Tel: (949) 642-7324 SECI Engineers & Buyers' Guide Fax: (949) 642- 7327 Sharma Film Capacitors 50-100V 102-124 1800PCS values 154-224 1500PCS values 274-474 1200PCS values 564-824 1000PCS values - - - - 250V 102-273 2000PCS values 333-524 1500PCS values 154-184 1200PCS values 224-274 1000PCS values 334-474 800PCS values 564-684 700PCS values Tel: (949) 642-7324 400V 102-822 2000PCS values 103-223 1500PCS values 273-393 1200PCS values 473-563 1000PCS values 683-823 800PCS values 104 700PCS value 630V 1000V 102-392 102-182 2000PCS 2000PCS values values 472-822 222-332 1500PCS 1500PCS values values 103-123 392-822 1200PCS 1200PCS values values 153-223 103 1000PCS 1000PCS values value 273-333 800PCS values 393 700PCS value SECI Engineers & Buyers' Guide Fax: (949) 642- 7327 Sharma Film Capacitors MKTD05 SERIES Features - Very small size, Epoxy coating, Flame retardant to UL94V-0 5mm Lead spacing. - Self-healing metallized polyester dielectric, Non-inductive construction. - High performance and efficiencies. Custom values, voltages, and case sizes available upon request. Application - Multi-purpose - Blocking & coupling - By-passing & Filtering, Timing Specifications Capacitance Range Operating Temperature Rated Voltage Capacitance Tolerance Tangent of Loss Angle Insulation Resistance Voltage Test Endurance Damp Heat Construction Lead Material Color of Body Markings 0.001F to 1.0F -40 to +85C (up to 100C - derate voltage 1.25% per C ) 50/63, 100, 250, 400, 630V DC 2(G), 5(J), 10(K) % 0.008 or LESS (at 1KHz +25C) Voltage Charge : 1 min at +25C, 5C 50 Vdc for Vr<100Vdc, 100Vdc for Vr100Vdc 9,000 or more, c0.33f 5000S or more c>0.33f 1.6 x Vr applied for 2sec +25C, 5C (Between Terminal) +85C, 2C, 1.25 x Vr, 1000Hr Cap Change: < 5%, DF Change : <50x10 at 1khz Insulation Resistance: <50% of limit value +40C2C, 93% 2%, 21days Cap Change: < 5%, DF Change : <50x10 at 1khz Insulation Resistance: <50% of limit value Non-inductive wound metallized polyester film Epoxy dipped encasement, Flame retardant to UL94V-0 Solder coated or Tinned solid wire Orange/Brown Capacitance, Tolerance, Voltage When space permits, Capacitor Type will be marked - Special size or items on request. - Tolerance Dimension 0.5 mm. Tel: (949) 642-7324 SECI Engineers & Buyers' Guide Fax: (949) 642- 7327 Sharma Film Capacitors Capacitance F code 0.001 102 0.0012 122 0.0015 152 0.0018 182 0.0022 222 0.0027 272 0.0033 332 0.0039 392 0.0047 472 0.0056 562 0.0068 682 0.0082 822 0.010 103 0.012 123 0.015 153 0.018 183 0.022 223 0.027 273 0.033 333 0.039 393 0.047 473 0.056 563 0.068 683 0.082 823 0.10 104 0.12 124 0.15 154 0.18 184 0.22 224 0.27 274 0.33 334 0.39 394 0.47 474 0.56 564 0.68 684 0.82 824 1.0 105 Tmax 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.5 4.0 4.0 4.3 4.8 5.0 5.5 5.8 6.3 6.3 6.3 Hmax 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.3 5.3 5.5 5.5 6.5 7.0 7.0 8.0 8.0 9.0 9.5 9.5 10.5 10.5 10.5 Tel: (949) 642-7324 50/63VDC Wmax 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 P 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 d 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 Tmax 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.5 4.0 4.0 4.3 4.8 5.0 5.5 5.8 6.3 6.3 6.3 100VDC Hmax Wmax 5.0 6.8 5.0 6.8 5.0 6.8 5.0 6.8 5.0 6.8 5.0 6.8 5.0 6.8 5.0 6.8 5.0 6.8 5.0 6.8 5.0 6.8 5.0 6.8 5.0 6.8 5.0 6.8 5.0 6.8 5.0 6.8 5.0 6.8 5.0 6.8 5.0 6.8 5.0 6.8 5.0 6.8 5.0 6.8 5.3 6.8 5.3 6.8 5.5 6.8 5.5 6.8 6.5 6.8 7.0 6.8 7.0 6.8 8.0 6.8 8.0 6.8 9.0 6.8 9.5 6.8 9.5 6.8 10.5 6.8 10.5 6.8 10.5 6.8 SECI Engineers & Buyers' Guide P 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 d 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 Fax: (949) 642- 7327 Sharma Film Capacitors Capacitance 250VDC F code Tmax Hmax Wmax P 0.0010 102 3.2 5.0 6.8 5.0 0.0012 122 3.2 5.0 6.8 5.0 0.0015 152 3.2 5.0 6.8 5.0 0.0018 182 3.2 5.0 6.8 5.0 0.0022 222 3.2 5.0 6.8 5.0 0.0027 272 3.2 5.0 6.8 5.0 0.0033 332 3.2 5.0 6.8 5.0 0.0039 392 3.2 5.0 6.8 5.0 0.0047 472 3.2 5.0 6.8 5.0 0.0056 562 3.2 5.0 6.8 5.0 0.0068 682 3.2 5.0 6.8 5.0 0.0082 822 3.2 5.0 6.8 5.0 0.010 103 3.2 5.0 6.8 5.0 0.012 123 3.2 5.0 6.8 5.0 0.015 153 3.2 5.0 6.8 5.0 0.018 183 3.2 5.0 6.8 5.0 0.022 223 3.2 5.0 6.8 5.0 0.027 273 3.2 5.0 6.8 5.0 0.033 333 3.2 5.0 6.8 5.0 0.039 393 0.047 473 0.056 563 0.068 683 0.082 823 0.10 104 0.12 124 0.15 154 0.18 184 0.22 224 0.27 274 0.33 334 0.39 394 0.47 474 0.56 564 0.68 684 0.82 824 1.0 105 - Tel: (949) 642-7324 d 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 - Tmax 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 - 400VDC Hmax Wmax P 5.0 6.8 5.0 5.0 6.8 5.0 5.0 6.8 5.0 5.0 6.8 5.0 5.0 6.8 5.0 5.0 6.8 5.0 5.0 6.8 5.0 5.0 6.8 5.0 5.0 6.8 5.0 5.0 6.8 5.0 5.0 6.8 5.0 5.0 6.8 5.0 5.0 6.8 5.0 - SECI Engineers & Buyers' Guide d Tmax 0.5 3.2 0.5 3.2 0.5 3.2 0.5 3.2 0.5 3.2 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 - 630VDC Hmax Wmax P 5.0 6.8 5.0 5.0 6.8 5.0 5.0 6.8 5.0 5.0 6.8 5.0 5.0 6.8 5.0 - Fax: (949) 642- 7327 d 0.5 0.5 0.5 0.5 0.5 - Sharma Film Capacitors Taping Specifications For Automatic Insertion Description Symbol Lead wire diameter Taping pitch Sprocket hole pitch Centering of the lead wire Centering of the body Lead spacing Component alignment Height from sprocket hole Height Center to the comp body Tape width Width of adhesive tape Sprocket hole alignment Position of adhesive tape Sprocket hole diameter Tape thickness d P P0 P1 P2 F h H1 H0 L W W0 W1 W2 D0 T Dimensions (mm) Lead Spacing 5mm 0.3 12.7 12.7 3.85 6.35 5.0 0 20.0 16.0 11.0 18.0 13.0 9.0 3max 4.0 0.7 Toll 0.05 0.1 0.2 0.5 1.3 0.8 2.0 0.5 0.5 0.5 +1.0-0.5 0.5 0.5 0.2 0.2 Standard Packing Quantity For Box 50-100V 102-104 values 2000PCS 124-182 values 1500PCS 224-474 values 1200PCS 564-824 values 1000PCS 105-125 values 800PCS Tel: (949) 642-7324 250V 102-183 values 223-333 values 393-473 values 563-823 values 104-224 values 2000PCS 1500PCS 1200PCS 1000PCS 800PCS SECI Engineers & Buyers' Guide 400V 102-822 values 103-153 values 183-273 values 333-393 values 474-563 values 2000PCS 1500PCS 1200PCS 1000PCS 800PCS Fax: (949) 642- 7327 Sharma Film Capacitors MKTD06 SERIES Features - Metallized polyester film, epoxy resin coating - Large C-values in small dimensions - Excellent self-healing properly and high reliability Specifications Operating Temperature Rated Voltage Capacitance Range Capacitance Tolerance Dissipation Factor -40+85C DC 250V, 400V, 630V 0.01 to 6.8 Mfd 5%, 10% <0.01 (At 1KHz) Cr0.33F:7,500Mohm, Ur >100V Cr>0.33F: >25,000Mohm*F, Ur >100V 1.4 Ur (Is) Insulation Resistance Voltage Test - Special size or items on request. - Tolerance Dimension 1.0 mm. VDC Mfd 0.01 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 Tel: (949) 642-7324 W 12 12 12 12 12 12 12 12 12 12 12 12 250VDC T H 6 8.5 6 8.5 6 8.5 6 9.5 6 9.5 6 9.5 6 9.5 6 9.5 6 9.5 6 9.5 6 9.5 6 9.5 P 10 10 10 10 10 10 10 10 10 10 10 10 W 11.5 11.5 11.5 12 12 12 12 12 12.5 12.5 12.5 12.5 400VDC T H 5 8 5 8 5 8 5 9 5 9 5 9 5 9 5 9 5 9 5 9 5 9 6 10.5 SECI Engineers & Buyers' Guide P 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 W 12 12 12 13 13 13 13 17.5 17.5 17.5 17.5 17.5 630VDC T H 5 8.5 5 8.5 5 8.5 6 9.5 6 9.5 6 10 6 10 6 10 6 10 6 10 6 10.5 6 11 Fax: (949) 642- 7327 P 10 10 10 10.5 10.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 Sharma Film Capacitors 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.50 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.5 2.7 6.8 13 13 13 13 17 17 17 17 18 18 18 23 23 23 24 28 28 28 32 6.5 7 7 7 7 7 7 7 7 7 7.5 7.5 7.5 8 8 8.5 8.5 9 10 10.5 10.5 10.5 10.5 10.5 10.5 11.5 11.5 11.5 13.5 13.5 13.5 13.5 14.5 14.5 16 18 18 18 10.5 10.5 10.5 10.5 15 15 15 15 15 15 15 20 20 20 20 25 25 25 30 17.5 6.5 9.5 17.5 5.5 9.5 17.5 5.5 9.5 17.5 5.5 9.5 19 7.5 12.5 19 7.5 9.5 19 7.5 15.5 22.5 5.5 11.5 23.5 6 11.5 23.5 8 12 23.5 8 12 23.5 8.5 18.5 28 8.5 18 28 9.5 18 28 9.5 18 30 10 19 30 10.5 19.5 30 10.5 19.5 30 10.5 19.5 15.5 15.5 15.5 15.5 16.0 20.5 16.0 20.5 20.5 25.5 25.5 20 20 25.5 25.5 28 28 28 28 17.5 17.5 23 23 23 23 23 23 23 28.5 28.5 28.5 28.5 28.5 28.5 30.5 30.5 30.5 30.5 8 8 8.5 8.5 8.5 8.5 9 9 9 9.5 9.5 10.5 10.5 13.5 13.5 13.5 13.5 13.5 13.5 13 13 14.5 14.5 14.5 14.5 15 15 15 18 18 19 19 22 22 22 22 22 22 15.5 15.5 20.5 20.5 20.5 20.5 20.5 25.5 25.5 25.5 25.5 25.5 25.5 25.5 25.5 28.5 28.5 28.5 28.5 *All sizes for reference only * Tel: (949) 642-7324 SECI Engineers & Buyers' Guide Fax: (949) 642- 7327 Sharma Film Capacitors MKT 00S SERIES Formerly SMX series DIMENSIONS AND TOLERANCES: INTRODUCTION The MKT00S Series Metallized Polyester Film Capacitors are miniature capacitors specially developed for Surface Mount Technology. This series covers a wide range of values and voltages in three convenient case sizes and have excellent electrical characteristics. The MKT00S series has fire retardant epoxy molded encapsulation which also provide high insulation resistance. "d" - 0.5 - 0.6 mm (0.020" - 0.024") for dimension "T" < 3.5mm (0.138") "d" - 0.6 mm (0.024") for dimension "T" > 3.5mm (0.138") "LL'' - 4.0 +1.5mm (0.16 + 0.06") for bulk supply FEATURES miniature size * Ultra Wide and voltage range in just three case sizes * Flamevalue retardant epoxy encapsulation * Consistent dimensions and surface finish due to molded construction * Compatible with all popular high speed assembly machines * Available in Carrier Tape, Stick and Bulk packing * Self healing capability * * Compatible with all standard standard SMT soldering methods CASE SIZE TABLE VOLTAGE V DC (Voltage Code) GENERAL SPECIFICATIONS: Dissipation factor: 0.0070 max at 1 K Hz Insulation resistance: >15,000 M Ohms at a temperature of 25 5 C, when measured at: 10 1 V DC for 63V DC rated capacitors, 100 15 V DC for 100 to 400V DC rating and, 500 50 V DC for 630V DC rating. Capacitance tolerance: 10%(K). 5%(J) available on request Voltage Test : 1.5 times the rated voltage applied between terminals for 2 seconds.at a temperature of 25 5 C Temperature range: -40 to 105 C with derating above 85 C. Climatic category: F M E in Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 C for 1000 hours. After the test: G H J Dimensions W 250 400 630 (2E) (2G) (2J) G G H H G G G G G H H J J Millimeters H H J J H J J H H J PULSE RISE TIME (dv/dt) - CASE DIMENSIONS TABLE SIZE 100 (2A) Volts per Second. Capacitance change shall remain within 5%. Dissipation Factor shall be within 1.5 times the original limits. Insulation Resistance shall be above 50% of the initial limits. There shall be no remarkable change in the appearance and the marking shall remain legible. CASE F 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 LIFE TEST DETAILS: 1. 2. 3. 4. 63 (1J) Capacitance Rated Capacitance dv/dt Voltage Range F Value 50 0.001-1.0 63 0.001-1.0 4 8 100 >0.0068 10 (Inches) 100 0.0033-0.0068 15 H L a b 5.2 (0.205) 3.2 (0.126) 7.2 (0.283) 1.0 (0.039) 3.0 (0.118) 100 >0.0033 30 8.2 (0.323) 4.5 (0.177) 10.0 (0.394) 1.5 (0.059) 4.0 (0.157) 250 0.001-1.0 20 8.2 (0.323) 5.0 (0.197) 12.5 (0.492) 2.0 (0.079) 4.0 (0.157) 400 0.001-1.0 40 TOLRANCE ON DIMENSIONS: 0.2mm (.008") Ordering Information (EXAMPLE) Example at right indicates: MKT 00S Series, 400 V DC, 0.047 F, 10%, Stick Magazine packing Series M K T 2A 2E 0 0 2G 2J S 2 G Series Code: MKT 00S Voltage Code Voltage Code DC Voltage 1J 63V 100V 250V 400V 630V Capacitance First Two Digits Represent Significant Figures of Capacitance in Picofarads. Third Digit Indicates Number of Zeros Tolerance Capacitance Tolerance Code: Capacitance Tolerance 20% Code M Packing Method Code Packing Code Method Case Sizes O T S Bulk Tape Stick G,H,J G H, J 10% K 5% J 4 7 3 K S Sharma Film Capacitors MKT 00S Packaging Specification LEADER SPECIFICATIONS TAPE DIMENSIONS DIMENSION DIMENSION in MILLIMETERS DIMENSION in INCHES A 5.6 0.3 0.220 0.012 B 7.6 0.3 0.299 0.012 W 12 0.3 0.472 0.012 F 5.5 0.05 0.217 0.002 E 1.75 0.1 0.069 0.004 DIMENSION DIMENSION in MILLIMETERS DIMENSION in INCHES P2 2 0.05 0.079 0.002 P0 4 0.1 0.157 0.004 D0 1.5 0.1 0.059 0.004 T 0.3 0.1 0.012 0.004 T2 4.2 0.2 0.165 0.008 P1 8 0.1 0.315 0.004 DIMENSION DIMENSION in MILLIMETERS DIMENSION in INCHES A 40 min 1.575 min B 40 min 1.575 min C 550 to 1200 21.65 to 47.24 REEL DIMENSIONS (500 pcs/Reel) PEEL-OFF STICK MAGAZINE DIMENSIONS Dimensions in Millimeters A B C D E W t o178 2.0 o50 min. 13.0 0.5 21.0 0.8 2.0 0.8 8.8/12.8 1.5 2.0 0.5 o330 2.0 o100 min. 13.0 0.5 21.0 0.8 2.0 0.8 8.8/12.8 1.5 2.0 0.6 Dimensions in Inches DIMENSION DIMENSION in MILLIMETERS DIMENSION in INCHES A 10.5 0.2 0.413 0.008 a 9.1 0.2 0.358 0.008 B 9.5 0.2 0.374 0.008 DIMENSION DIMENSION in MILLIMETERS DIMENSION in INCHES C 5 0.2 0.197 0.008 D 2.5 0.2 0.098 0.008 L 670 2.0 26.378 0.080 b 6.3 0.2 0.248 0.008 A B C D E W t o7 0.08 o2.0 min. 5.0 0.02 0.83 0.03 0.08 0.3 0.35/0.50 0.06 0.08 0.02 o13 0.08 o4.0 min. 5.0 0.3 0.83 0.03 0.08 0.3 0.35/0.50 0.06 0.08 0.02 STANDARD PACKING QUANTITY CASE SIZE G H J QUANTITY PER PACK TAPE STICK BULK 500 NA 100 NA 60 100 NA 50 100 Sharma Film Capacitors MKTR SERIES Formerly MPR series INTRODUCTION The MKTR Series Round Axial Metallized Polyester Film Capacitors cover a wide range of values and voltages. These capacitors also have good high frequency characteristics and are suitable for applications such as Blocking, By-passing, Coupling and all General Purpose applications. L max. 1.4" max 1.4" max D max. d FEATURES value and Voltage range * Wide Tape wrapped axial construction for different typed of mounting * Reduced due to taped wrapped encapsulation * Self healingdimensions capability * Available in tape and reel form for automatic insertion * * Close tolerance 1% and 2% available on request DIMENSIONS AND TOLERANCES "d" = 0.6 mm (0.024") For D6.0 mm "d" = 0.8 mm (0.032") For D>6.0 mm PULSE RISE TIME (dv/dt) Volts per sec. (please check with us about availability of specific values) RATED VOLTAGE dv / dt rating in volts / seconds 100 160 1 2 250 400 630 1000 3 5 7 10 GENERAL SPECIFICATIONS Dissipation factor: 0.0100 at 1 K Hz Insulation resistance: For 100 VDC rated parts; 9,000 M Ohms for C 0.33 F, 3,000 seconds for C> 0.33 F at a temperature of 25 5 C. For 250 to 630 VDC rated parts; 15,000 M Ohms for C 0.33 F, 5,000 seconds for C> 0.33 F at a temperature of 25 5 C. Capacitance tolerance: 5%(J), 10%(K) and 20%(M). Voltage Test : 1.6 times the rated voltage applied between terminals for 2 seconds. at a temperature of 25 5 C. Temperature range: -40 to 85 C with derating above 85 C. Climatic category: G P D LIFE TEST DETAILS: Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 C for 1000 hours. After the test:; 1. Capacitance change shall remain within 5%. 2. Dissipation Factor shall be within 1.5 times the original limits 3. Insulation Resistance shall be above 30% of the initial limits. 4. There shall be no remarkable change in the appearance and the marking shall remain legible. Case Dimensions in Millimeters: 100V * 160V * 250V * 400V * 630V VOLTAGE DC VOLTAGE AC Capacitance in uF 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 100 63 Dimensions in MM D L 5 10.5 5 10.5 5 10.5 5 10.5 5.5 10.5 5.5 10.5 5.5 10.5 5.5 14 5.5 14 5.5 14 6.5 14 6.5 19 7.5 19 9.5 19 9.5 27 11 27 12.5 27 14 32 160 90 Dimensions in MM D L 5 10.5 5 10.5 5 10.5 5 10.5 5.5 10.5 5.5 10.5 6 10.5 6 14 6.5 14 7.5 14 7.5 19 8 19 9.5 19 9.5 27 11 27 13 27 14 32 17 32 250 160 Dimensions in MM D L 5 10.5 5 10.5 5 10.5 5 10.5 5.5 14 5.5 14 6 14 7 19 7 19 8 19 9.5 27 9.5 27 10.5 27 12.5 27 14 32 16 32 18.5 32 21.5 47 400 200 Dimensions in MM D L 5 10.5 5.5 14 5.5 14 6 14 7 14 7 19 7.5 19 8.5 19 8.5 27 10 27 12.5 27 12.5 32 14.5 32 17.5 32 20.5 32 20.5 47 23 47 27 47 630 220 Dimensions in MM D L 6 14 6.5 14 7 14 7 19 7.5 19 8.5 19 9 27 10.5 27 11.5 27 11.5 32 14 32 16.5 32 20 32 19 47 23 47 28 47 Case Dimensions in Inches: 100V * 160V * 250V * 400V * 630V VOLTAGE DC VOLTAGE AC Capacitance in uF 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 100 63 Dimensions in Inches D L 0.197 0.413 0.197 0.413 0.197 0.413 0.197 0.413 0.217 0.413 0.217 0.413 0.217 0.413 0.217 0.551 0.217 0.551 0.217 0.551 0.256 0.551 0.256 0.748 0.295 0.748 0.374 0.748 0.374 1.063 0.433 1.063 0.492 1.063 0.551 1.260 160 90 Dimensions in Inches D L 0.197 0.413 0.197 0.413 0.197 0.413 0.197 0.413 0.217 0.413 0.217 0.413 0.236 0.413 0.236 0.551 0.256 0.551 0.295 0.551 0.295 0.748 0.315 0.748 0.374 0.748 0.374 1.063 0.433 1.063 0.512 1.063 0.551 1.260 0.669 1.260 250 160 Dimensions in Inches D L 0.197 0.413 0.197 0.413 0.197 0.413 0.197 0.413 0.217 0.551 0.217 0.551 0.236 0.551 0.276 0.748 0.276 0.748 0.315 0.748 0.374 1.063 0.374 1.063 0.413 1.063 0.492 1.063 0.551 1.260 0.630 1.260 0.728 1.260 0.846 1.850 400 200 Dimensions in Inches D L 0.197 0.413 0.217 0.551 0.217 0.551 0.236 0.551 0.276 0.551 0.276 0.748 0.295 0.748 0.335 0.748 0.335 1.063 0.394 1.063 0.492 1.063 0.492 1.260 0.571 1.260 0.689 1.260 0.807 1.260 0.807 1.850 0.906 1.850 1.063 1.850 630 220 Dimensions in Inches D L 0.236 0.551 0.256 0.551 0.276 0.551 0.276 0.748 0.295 0.748 0.335 0.748 0.354 1.063 0.413 1.063 0.453 1.063 0.453 1.260 0.551 1.260 0.650 1.260 0.787 1.260 0.748 1.850 0.906 1.850 1.102 1.850 Sharma Film Capacitors MKTO SERIES Formerly MPO series INTRODUCTION The MKTO Series Flat Axial Metallized Polyester Film Capacitors cover a wide range of values and voltages. These capacitors also have good high frequency characteristics and are suitable for; Blocking, By-passing, Coupling and all General Purpose applications. This series is specifically designed for mounting in locations where height is critical or where different mounting options are required. (1.4" min.) DIMENSIONS AND TOLERANCES "d" - 0.8 mm (0.032") FEATURES: value and Voltage range * Wide Flat axial for different types of mounting * Reduced construction dimensions due * Self healing capability to tape wrapped encapsulation * PULSE RISE TIME (dv/dt) Volts per sec. RATED dv / dt rating VOLTAGE in volts / seconds GENERAL SPECIFICATIONS 100 1 160 2 250 3 400 Dissipation factor: 0.0100 at 1 K Hz. Insulation resistance: For 100 VDC 630 rated parts; 9,000 M Ohms for C 0.33 F, 3,000 seconds for C> 0.33 F 1000 at a temperature of 25 5 C. For 250 to 630 Case Dimensions in Millimeters: 100V * 250V * 400V * 630V VDC rated parts; 15,000 M Ohms for C VOLTAGE (DC) 100 V DC 250 V DC 0.33 F 5,000 seconds for VOLTAGE (AC) 63 V AC 160 V AC Dimensions Dimensions C> 0.33 F at a temperature Capacitance in Millimeters in Millimeters of 25 5 C. Capacitance in F L H T L H T tolerance: 5%(J), 10%(K) 0.01 and 20%(M) Voltage Test: 0.015 1.6 times the rated voltage 0.022 applied between terminals 0.033 0.047 for 2 seconds. at a tempera0.068 ture of 25 5 C 0.1 14.0 8.0 4.5 14.0 8.0 4.5 Temperature range: -40 to 0.15 14.0 8.0 4.5 14.0 9.0 5.0 85 C with derating above 0.22 14.0 8.5 5.0 19.0 9.0 5.0 85 C. 0.33 19.0 8.0 4.5 19.0 10.5 5.5 Climatic category: G P D 0.47 19.0 9.0 5.0 19.0 12.0 7.0 5 7 10 400 V DC 200 V AC 630 V DC 220 V AC Dimensions Dimensions in Millimeters L 19.0 H 10.0 in Millimeters T 5.0 L H T 14.0 7.0 4.5 14.0 7.5 5.0 14.0 8.0 6.0 19.0 10.0 5.0 19.0 10.0 5.0 19.0 11.0 6.0 27.0 10.5 6.0 19.0 11.0 6.5 27.0 13.0 7.5 19.0 13.0 8.0 27.0 14.5 8.5 27.0 13.0 7.0 32.0 15.0 9.5 27.0 14.0 8.0 32.0 17.0 12.0 0.68 19.0 10.5 5.5 27.0 12.0 6.0 32.0 16.0 9.0 32.0 20.0 15.0 1 19.0 12.0 6.0 27.0 13.0 7.0 32.0 18.5 10.5 32.0 26.0 17.0 LIFE TEST DETAILS: Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 C for 1000 hours. After the test:; 1. Capacitance change shall remain within 5%. 2. Dissipation Factor shall be within 1.5 times the original limits 3. Insulation Resistance shall be above 50% of the initial limits. 4. There shall be no remarkable change in the appearance and the marking shall remain legible. (1.4" min.) 1.5 19.0 14.0 8.5 32.0 15.0 8.5 32.0 22.0 12.0 47.0 23.5 16.5 2.2 27.0 14.0 7.0 32.0 16.5 10.0 32.0 24.0 16.0 47.0 25.5 17.5 47.0 34.0 21.0 3.3 27.0 17.0 9.5 32.0 20.5 12.0 47.0 23.5 15.0 4.7 32.0 18.0 10.0 32.0 25.0 14.0 47.0 27.0 18.0 6.8 32.0 21.0 11.0 47.0 23.0 14.0 47.0 34.0 22.0 Case Dimensions in Inches: 100V * 250V * 400V * 630V VOLTAGE (DC) VOLTAGE (AC) Capacitance in F L 100 V DC 63 V AC 250 V DC 160 V AC 400 V DC 200 V AC 630 V DC 220 V AC Dimensions Dimensions Dimensions Dimensions in Inches in Inches in Inches H T L H T L H in Inches T 0.01 L 0.551 H 0.276 T 0.177 0.015 0.551 0.295 0.197 0.022 0.551 0.315 0.236 0.033 0.748 0.394 0.197 0.047 0.748 0.394 0.197 0.068 0.1 0.551 0.315 0.177 0.551 0.315 0.177 0.748 0.394 0.197 0.748 0.433 0.236 1.063 0.413 0.236 0.15 0.551 0.315 0.177 0.551 0.354 0.197 0.748 0.433 0.256 1.063 0.512 0.295 0.22 0.551 0.335 0.197 0.748 0.354 0.197 0.748 0.512 0.315 1.063 0.571 0.335 0.33 0.748 0.315 0.177 0.748 0.413 0.217 1.063 0.512 0.276 1.260 0.591 0.374 0.47 0.748 0.354 0.197 0.748 0.472 0.276 1.063 0.551 0.315 1.260 0.669 0.472 0.68 0.748 0.413 0.217 1.063 0.472 0.236 1.260 0.630 0.354 1.260 0.787 0.591 1 0.748 0.472 0.236 1.063 0.512 0.276 1.260 0.728 0.413 1.260 1.024 0.669 1.5 0.748 0.551 0.335 1.260 0.591 0.335 1.260 0.866 0.472 1.850 0.925 0.650 2.2 1.063 0.551 0.276 1.260 0.650 0.394 1.260 0.945 0.630 1.850 1.004 0.689 1.850 1.339 0.827 3.3 1.063 0.669 0.374 1.260 0.807 0.472 1.850 0.925 0.591 4.7 1.260 0.709 0.394 1.260 0.984 0.551 1.850 1.063 0.709 6.8 1.260 0.827 0.433 1.850 0.906 0.551 1.850 1.339 0.866 Sharma Film Capacitors MKT FS SERIES INTRODUCTION: The MKTFS Series Metallized Polyester Film Capacitors cover a wide range of values and voltages. This series provides alternative dimensions for the same values covered by the other MKTD series. These capacitors are suitable for applications such as Blocking, By-passing and Coupling and are widely used in General communication equipment. DIMENSIONS AND TOLERANCES: d - 0.7 mm FEATURES: Wide value and Voltage range Self healing capability Flame retardant powder epoxy encapsulation Minimum overall dimensions due to dip coated construction LL - 20.0 mm min. * * * * z - 3 mm max. Tolerance on P 1.5 mm GENERAL SPECIFICATIONS: Dissipation factor: < 0.0100 at 1 K Hz for capacitance 1.0 F, < 0.0150 at 1 K Hz for capacitance> 1.0 F. Insulation resistance: For 100 VDC rated parts; 9,000 M Ohms for C 0.33 F, 3,000 seconds for C> 0.33 F at a temperature of 25 5 C. For 250 to 630 VDC rated parts; 15,000 M Ohms for C 0.33 F, 5,000 seconds for C> 0.33 F at a temperature of 25 5 C Capacitance tolerance: 5%(J) and 10%(K). Voltage Test : 1.75 times the rated voltage applied between terminals for 5 seconds. at a temperature of 25 5 C. Temperature range: -40 to 85 C. PULSE RISE TIME (dv/dt) Volts per sec. LEAD SPACING mm (inches) Rated 10.0 15.0 22.5 27.0 Voltage (0.40) (0.60) (0.89) (1.06) 100 6 3 2 1 250 11 7 4 3 400 20 10 5.5 5 630 30 15 8 7 LIFE TEST DETAILS: Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 C for 1000 hours. After the test: 1. 2. 3. 4. Capacitance change shall remain within 5%. Dissipation Factor shall be within 1.5 times the original limits. Insulation Resistance shall be above 50% of the initial limits. There shall be no remarkable change in the appearance and the marking shall remain legible. Case Dimensions in Millimeters 100V * 250V Capacitance in F L 0.01 0.015 0.022 0.033 0.047 0.056 0.068 0.082 0.1 0.15 0.22 0.33 0.47 0.56 0.68 1.0 1.5 2.2 3.3 4.7 10 Case Dimensions in Millimeters 400V * 630V VOLTAGE DC/AC 100 V DC / 63 V AC 250 V DC / 160 V AC Dimensions in Millimeters H T P 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 18.5 18.5 18.5 18.5 24.0 30.0 30.0 37.0 9.5 9.5 9.5 9.5 10.0 10.0 10.0 10.0 9.5 1.5 11.0 11.0 11.0 11.0 12.0 13.5 15.5 16.0 19.0 20.0 25.0 5.0 5.0 5.0 5.0 5.5 5.5 5.0 5.5 5.0 5.5 5.5 6.0 6.0 5.5 6.0 7.5 8.5 9.0 12.0 12.0 18.0 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 16.0 16.0 16.0 16.0 21.5 21.5 26.5 32.5 L Dimensions in Millimeters H T P 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 18.5 18.5 18.5 24.0 24.0 30.0 30.0 30.0 9.5 9.5 9.5 9.5 10.0 10.0 10.0 10.0 9.5 10.5 11.0 11.5 12.5 13.0 13.5 13.0 16.5 17.0 21.0 24.0 5.0 5.0 5.0 5.0 5.5 5.5 5.0 5.5 5.0 5.5 6.0 6.0 6.0 6.5 7.0 6.0 8.5 9.0 12.0 15.0 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 15.0 15.5 15.5 21.0 21.5 27.0 27.5 27.5 Capacitance in F VOLTAGE DC/AC 400 V DC / 200 V AC 630 V DC / 220 V AC L 0.01 0.015 0.022 0.033 0.047 0.056 0.068 0.082 0.1 0.15 0.22 0.33 0.47 0.56 0.68 1.0 1.5 Dimensions in Millimeters H T P 13.0 13.0 13.0 13.0 13.0 15.0 15.0 15.0 15.0 15.0 18.5 18.5 24.0 24.0 24.0 24.0 24.0 9.5 9.5 9.5 9.5 10.0 10.0 10.5 11.0 12.0 12.5 12.0 13.0 13.0 13.5 14.0 18.0 20.0 5.0 5.0 5.0 5.0 5.5 5.5 5.5 5.5 6.0 6.5 5.0 7.0 5.5 6.5 7.0 9.0 10.0 11.5 11.5 11.5 11.5 11.5 13.0 13.0 13.0 13.0 13.0 16.5 16.5 21.5 21.5 21.5 21.5 21.5 L Dimensions in Millimeters H T P 13.0 13.0 13.0 13.0 18.0 18.0 18.0 18.0 18.0 18.0 24.0 24.0 24.0 24.0 24.0 31.0 10.0 10.0 11.0 11.5 11.5 12.0 12.5 13.0 13.5 14.5 13.0 15.5 16.5 17.5 18.5 21.0 5.5 5.5 5.5 6.0 6.0 6.5 6.5 7.0 7.0 8.0 6.0 7.5 8.0 9.0 10.0 11.0 11.5 11.5 11.5 11.5 16.5 16.5 16.5 16.5 16.5 16.5 21.5 21.5 21.5 21.5 21.5 27.5 Sharma Film Capacitors MKTMPX SERIES SAFETY RECOGNIZED FILM CAPACITOR 1. 2. 3. 4. 5. 6. Rated Interference Suppression "X2" Metallized Polypropylene Composite dielectric. UL 1414 (250V AC), CUL 1414/Canda (250V VAC) VDE KEMA SEV NEMKO DEMKO SEMKO FIMKO CHINA: DIN EN 132400 (1994) / IEC60382-14 (1993) AND IEC DRAFT 40 (SEC)677 Ideal for using in Line-By-Pass, Antenna Coupling, Across-The-Line and Spark killer circuits and available for EMI filter and switching power supply and radio-and monitor, television application. Flame retardant plastic cases and epoxy resin. (compliance with 94V-0) Self-healing properties. Proven series wound construction. Approved By : UL, CSA, VDE, KEMA, SEV, NEMKO, DEMKO, SEMKO, FIMKO, CHINA. V D E CQC SPECIFICATIONS : DISSIPATION FACTOR MAXIMUM PULSE RISE TIME -40 to +100 280VAC 0.0022 ~ 4.7uF Applied 1500VDC for 1minute or 2100VDC for 1 second. +-10% (K) Measured after a charging voltage 100 15VDC for 1 minute. LESS THAN OR EQUAL TO 0.33PF 30,000M: GREATER THAN 0.33PF 10,000M:PF 0.1% MAX. at 1KHz 250 VAC: 120 V/microsecond. PF SIZE 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.047 0.056 0.068 0.068 0.082 0.1 0.1 0.1 0.12 0.15 0.15 0.18 0.18 0.22 T 4.0 4.0 4.0 4.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 6.0 5.0 6.0 6.0 6.0 5.0 5.5 6.0 6.0 5.5 6.5 7.5 6.0 8.5 6.0 8.5 OPERATING TEMPERATURE RATED VOLTAGE CAPACITANCE RANGE DIELECTRIC STRENGTH CAPACITANCE TOLERANCE INSULATION RESISTANCE W 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 18.0 13.0 13.0 13.0 18.0 18.0 13.5 18.0 18.0 18.0 18.0 26.5 18.0 26.5 18.0 Dimension H 9.0 9.0 9.0 9.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 11.0 12.0 12.0 12.0 11.0 12.0 12.0 12.0 11.5 13.0 13.5 15.0 14.5 16.0 14.5 P 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 15.0 10.0 10.0 10.0 15.0 15.0 10.0 15.0 15.0 15.0 15.0 22.5 15.0 22.5 15.0 dO 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 PF SIZE 0.22 0.27 0.33 0.33 0.33 0.39 0.47 0.47 0.47 0.47 0.47 0.56 0.68 0.68 0.82 0.82 1.0 1.0 1.0 1.5 1.5 1.8 2.0 2.0 2.2 2.2 2.5 3.0 3.3 4.0 4.7 W 26.5 26.5 18.0 26.5 26.5 26.5 17.5 18.0 26.5 26.5 32.0 32.0 26.5 32.0 32.0 26.5 32.0 32.0 37.0 32.0 37.0 37.0 31.0 38.0 31.0 38.0 38.0 38.0 38.8 48.0 48.0 W max T max H max 25 2.0 dO P0.5 H 16.5 16.5 14.5 16.5 17.0 20.0 19.0 16.0 17.0 20.0 20.0 20.0 20.0 20.0 22.0 20.0 20.0 22.0 25.0 22.0 26.5 29.0 31.0 28.0 31.0 29.0 30.0 30.0 31.3 30.0 30.0 (Unit : mm) T 7.0 8.5 8.5 7.0 8.5 10.0 11.0 10.0 8.5 10.0 11.0 11.0 10.0 11.0 13.0 10.0 11.0 13.0 13.5 13.0 17.0 19.0 22.0 18.0 22.0 19.0 20.0 20.0 21.7 30.0 30.0 P 22.5 22.5 15.0 22.5 22.5 22.5 15.0 15.0 22.5 22.5 27.5 27.5 22.5 27.5 27.5 22.5 27.5 27.5 31.5 27.5 31.5 31.5 27.5 31.5 27.5 31.5 31.5 31.5 31.5 41.5 41.5 dO 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8D Tolerance: +/- 0.5mm Tel: (949)642-7324 SECI Engineers & Buyers' Guide Fax: (949)642-7327