MKT050104A101T - Sharma - Datasheet.Directory

Series Dielectric/ Lead Spacing Capacitance Range Style

(Former Series)

Construction

millimeters / (inches) Voltage Range

MKT 050 Metallized Polyester 5.0 (0.200”) 0.001 µF to 1.0 µ F

(MKT1.85)

Molded can

50 VDC to 400 VDC

MKT 075 Metallized Polyester 7.5 (0.300”) 0.033 µF to 0.33 µ F

(MKT1.67)

Molded can

100 VDC to 630 VDC

MKT 100 Metallized Polyester 10.0 (0.400”), 15.0 (0.600”), 0.001 µF to 6.8 µ F

(MKT1.60)

Molded can

22.5 (0.886”), 27.5 (1.083”) 100 VDC to 1000 VDC

MKT 00S Metallized Polyester Surface Mount 0.01 µF to 0.22 µ F

(SMX)

Epoxy molded

50 VDC to 630 VDC

MKT D01 Metallized Polyester 10.0 (0.400”), 15.0 (0.600”), 0.001 µF to 6.8 µ F

(MPD-1)

Epoxy dipped

22.5 (0.886”), 27.5 (1.083”) 100 VDC to 630VDC

MKT D02 Metallized Polyester 10.0 (0.400”), 15.0 (0.600”), 0.01 µF to 3.9 µ F

(MPD-2)

Epoxy dipped

17.5 (0.689”), 25.0 (0.984”) 100 VDC to 630VDC

27.5 (1.083”)

MKT D03 Metallized Polyester 10.0 (0.400”), 15.0 (0.600”), 0.01 µF to 3.9 µ F

(MPD-3)

Epoxy dipped

17.5 (0.689”), 25.0 (0.984”) 100 VDC to 630VDC

27.5 (1.083”)

MKTR Metallized Polyester Rounded Axial 0.01 µF to 6.8 µ F

(MPR)

Tape wrapped

63 VDC to 630 VDC

MKTO Metallized Polyester Oval Axial 0.01 µF to 6.8 µ F

(MPO)

Tape wrapped

63 VDC to 630 VDC

PLASTIC FILMS

USED IN CAPACITORS

The capacitance value of a

capacitor depends on the area

of the dielectric separating the

two conductors, its thickness

and the dielectric constant.

Other properties of the film

such as the temperature

coefficient, the dissipation

factor, the voltage handling

capabilities, its suitability to be

metallized etc. also influence

the choice of the dielectric.

POLYESTER FILM

This film has a relatively high

dielectric constant which

makes it suitable for designs

of a capacitor with high

volumetric efficiency. It also

has high temperature stability,

high voltage and pulse

handling capabilities and can

be produced in very low

thickness. It can also be

metallized. Polyester is a

popular dielectric for plain film

capacitors as well as

metallized film capacitors.

Quick Reference Guide

FILM CAPACITORS

SHARMA MKT 050 MKT 075 MKT 100 MKT 00S MKT D01 MKT D02 MKT D03 MKTR MKTO

(former series) MKT1.85 MKT1.67 MKT1.60 SMX MPD-1 MPD-2 MPD-3 MPR MPO

Arcotronics R.85 R.66 R.60 LDA - - - - -

Evox MMK 5 MMK MMK - - - - - -

MEPCO* 712A 1 719A 1 719A 1 - 712A 1 712A 1 712A 1 - -

Philips 370 371 372 & 373 - 367 to 369 366 to 369 367 to 369 - -

Roederstein MKT1817 MKT1818 MKT1822 MKT1824 - - - MKT1813 -

Siemens B32529 B32520/30 B32521/31 - 5140 to 44 5140 to 44 5140 to 44 - -

Thompson IRD/MC IRD/MC IRD/MC - MD MD MD - -

Wima MKS 2 MKS 3 MKS 4 SMD 7.3 - - - -

POLYPROPYLENE FILM

The dielectric constant of polypropylene is slightly higher than that of polyester which makes the capacitors relatively bigger in size. This film has

a low dissipation factor and excellent voltage and pulse handling capabilities together with a low and negative temperature coefficient which is

an ideal characteristic for many designs. Polypropylene has the capability to be metallized.

POLYSTYRENE FILM

The dielectric constant of Polystyrene is relatively lower resulting in larger physical size of capacitors. Though the temperature handling

capability of this film is lower than that of the other films, it is extremely stable within the range. Its low dissipation factor and the negative, near

linear temperature coefficient characteristics make it the ideal dielectric for precision capacitors. Polystyrene cannot be metallized.

Cross Reference Guide

* MEPCO SERIES ARE BEING REPLACED WITH PHILIPS SERIES AS LISTED IN THE TABLE. BOTH SERIES ARE LISTED FOR YOUR CONVENIENCE.

Sharma Film Capacitors

Part Marking

The Capacitance value is marked in µF along

with the Tolerance code and the DC Voltage

Figures on the side of the capacitors. The

capacitance is also marked in Capacitance

code with the first two digits representing the

significant digits followed by one digit

representing the number of zeros. The SAHA

logo may be replaced with marking, "SH", “S”

or no brand marking depending on the limitation of space.

The Capacitance value is marked in µF together

with the Tolerance code and the DC Voltage

Figures on the top surface of the capacitors. The

capacitance is also marked in Nano Farads with "n"

representing the decimal point in the capacitance

value. The SAHA logo and series codes, MKT100,

MKP 100, KP300 etc., or their former series

designations, are marked on the side. MKT100 series is supplied in

certain cases, without series code marking. SAHA logo may be

replaced with marking, "SH" or “S” depending upon the

limitations of space.

All other types of capacitors such as tape wrapped axial, tape wrapped radial, vertical box type etc.,. are also marked on the body of the

capacitor with the similar information in one of the combinations, as explained above. In addition, in certain cases, the outer foil side is also

indicated with a dot or ring.

BOX TYPE DIPPED TYPE

OTHER TYPES

2.2J250

MKT 100

2.2K250

Ordering/Part Numbering

Example below indicates: MKT100 Series, 0.1µF, 5% Tol., 100 Volts, Bulk.

(EXAMPLE) M K T 1 0 0 1 0 4 J 1 0 1

Series

Enter Series Code: (Up to 6 Digits)

MKT050, MKT075, MKT100, MKT00S, MKTD01, MKTD02,

MKTD03, MKTR, MKTO.

Capacitance

Enter EIA Capacitance Code: (3 Digits)

First Two Digits Represent Significant Figures of Capacitance in Picofarads.

Third Digit Indicates Number of Zeros

Example:1000pF = 102

0.01uF = 103

Tolerance

Enter Capacitance Tolerance Code: (1 Digit)

Tolerance SPCL ± 1% ± 2% ± 3% ± 5% ± 6% ± 10%± 20%

Code A F G L J H K M

Rated Voltage

Enter Voltage Code: (3 Digits)

First Two Digits Represent Significant Figures of DC Voltage unless individual data sheet specifies Only AC Rating.

Third Digit Indicates Number of Zeros

Example:50V DC = 500

250V DC = 251

Product Packaging Code

Standard for Film Capacitors is Bulk packing. No Packaging Code Required for Bulk Style.

For other packaging styles, Enter packaging code listed below. (1 Digit)

Packaging Packaging

Code Style

T Tape / Reel

A Ammo

( no code) Bulk

Sharma Film Capacitors

RH

RoHS

Compliant

ELECTRICAL - BASIC PARAMETERS

1.1RATED CAPACITANCE

The nominal or rated value of capacitance is measured at 25°Cin an measuring bridge with 1K Hz

source, free of harmonics. Please refer to relevant series for the range of capacitance value covered.

Capacitance is frequency and temperature dependent. The variation pattern of capacitance with

temperature and frequency is explained in sections 2.1 and 2.2.

1.2CAPACITANCE TOLERANCE

The permitted variation of actual value from the nominal value is termed the tolerance. The tolerance

is expressed in percentage. The standard tolerances for plastic film capacitors are ±5% (J), ±10% (K)

and ±20% (M).

1.3RATED VOLTAGE

The voltage at which the capacitor can operate continuously up to a temperature of 85 °C (unless

otherwise specified) is the rated voltage. As this is a critical parameter for choosing a capacitor, the

case sizes are listed in a matrix of capacitance value and rated voltage.

1.4CATEGORY VOLTAGE

The maximum voltage that may be applied continuously over the temperature range is termed the

category voltage. This is same as the rated voltage up to 85 °C unless otherwise specified in the

climactic category of the product. Above 85 °C a derating has to be applied depending upon the

dielectric.

1.5OPERATING TEMPERATURE

This is the temperature range with in which the capacitor can function as specified in the climactic

category. Please refer to relevant sections for derating above the temperature at which the full rated

voltage can be applied.

1.6DISSIPATION FACTOR

This is the measurement of tangent of loss angle (tan d) and is expressed as a percentage.

Measurement of dissipation factor is carried out at 1 K Hz. or 10 K Hz. as specified in the data sheet

of the relevant series at 25 °C. Dissipation factor is temperature and frequency dependent. The

nature of variation of dissipation factor with temperature and frequency for different dielectric are

explained in Figures 2.3A to 2.3C and 2.4A to 2.4C.

1.7INSULATION RESISTANCE

Insulation Resistance is the electrical resistance offered by the capacitor. The Insulation Resistance

is measured directly in Mega Ohms where as for higher capacitance values it is expressed in seconds

as the product of M Ohm and µF.

1.8PULSE RISE TIME

The pulse rise time or dv/dt rating is the capability of the capacitor to handle rapid changes in voltage

or pulse. This is expressed in terms of Volts per µseconds. The dv/ dt rating of a capacitor depends

upon the dielectric as well as the design and construction of the capacitors. The dv/dt values of

different types of capacitors are listed in the corresponding data sheets of the capacitors.

ELECTRICAL - EFFECTS AND RELATIONS

2.1TEMPERATURE DEPENDENCE OF CAPACITANCE

Capacitance of plastic film capacitors vary with temperature. However the pattern of variation is

different for different plastic film dielectrics such as Polystyrene, Polyester and Polypropylene. The

The variation patterns for these dielectrics are shown in figure 2.1A, 2.1B and 2.1C. The rate of

change of capacitance with temperature is termed the Temperature Coefficient. The nominal values

of temperature coefficient for different dielectrics are shown below.

2.2FREQUENCY DEPENDENCE OF CAPACITANCE

Capacitance reduces with increase in frequency. The

variation pattern for different dielectrics are shown in

figure 2.2A, 2.2B and 2.2C.

2.3TEMPERATURE DEPENDENCE OF

DISSIPATION FACTOR

The dissipation factor varies with temperature. Each

dielectric follows a unique variation pattern. The variation

pattern for different dielectrics are shown in figure 2.3A,

2.3B and 2.3C.

PERFORMANCE CHARACTERISTICS

Figure 2.1B

Figure 2.1C

Figure 2.2A

Figure 2.2C Figure 2.2B

Polyester

Capacitance Change Vs. Temperature

Polypropylene

Capacitance Change Vs. Temperature

Polystyrene

Capacitance Change Vs. Frequency

Polyester

Capacitance Change Vs. Frequency

Polypropylene

Capacitance Change Vs. Frequency

DIELECTRICS POLYSTYRENE POLYESTER POLYPROPYLENE

TEMPERATURE

COEFFICIENT -150 ppm +400 ppm -200 ppm

Figure 2.1A

Polystyrene

Capacitance Change Vs. Temperature

Sharma Film Capacitors

Figure 2.3A

Polystyrene

Dissipation Factor Vs. Temperature

2.4FREQUENCY DEPENDENCE OF

DISSIPATION FACTOR

Dissipation factor increased with frequency. The variation

pattern is different for different dielectrics. The typical

variation pattern for different dielectrics are shown in fig.

2.4A, 2.4B and 2.4C.

2.5TEMPERATURE DEPENDENCE OF INSULATION

RESISTANCE

The insulation resistance of the dielectric varies with

temperature. The variation pattern is different fro different

dielectric films. The typical variation pattern for different

dielectrics are shown in figure 2.5A, 2.5B and 2.5C.

ELECTRICAL - AC APPLICATIONS

When a capacitor is connected to alternating voltage its

electrodes are alternately charged positive and negative.

The charge alternates with a rhythm of double the

frequency of the alternating voltage. Thus there is

alternating current flowing in the leads of the capacitor.

3.1ACROSS THE LINE APPLICATIONS

In this application the capacitor is connected between the

lines, ie, between the main phase and neutral line

terminals. In this type of application, failure of capacitor

due to short circuit will not result in an electric shock. The

capacitors rated for normal across the line applications

are termed class-X2 capacitors.

3.2BETWEEN LINE AND GROUND APPLICATIONS

In this type of application the capacitors are connected

between the line and the ground, ie, between the phase

terminal and the body. In this application, failure of the

capacitor due to short circuit could possibly expose

somebody touching the appliance to an electric shock.

The capacitors rated for this application are termed class-

Y capacitors.

MECHANICAL CHARACTERISTICS

4.1RESISTANCE TO SOLVENTS

The encapsulation technics adopted in the manufacture of

plastic film capacitors ensure resistance to a wide range

of solvents and cleaning liquids. The epoxy end sealed

boxed capacitors can stand Trichloro trifluorethane,

Methanol, Ethanol, Isopropanol and Aqueous cleaning

solvents.

4.2SOLDERABILITY

A minimum of 3/4 of the circumferential surface of the

terminations will be covered with new solder when dipped

in molten solder bath at 230 °C for 2 ±1 sec. after

immersing in methanol - rosin solution at room

temperature for 5 to 10 seconds.

Figure 2.3B

Figure 2.3C

Polyester

Dissipation Factor Vs. Temperature

Polypropylene

Dissipation Factor Vs. Temperature

Figure 2.4A

Figure 2.4B

Polystyrene

Dissipation Factor Vs. Frequency

Polyester

Dissipation Factor Vs. Frequency

Figure 2.4C

Polypropylene

Dissipation Factor Vs. Frequency

Figure 2.5A

Polystyrene

Insulation Resistance Vs. Temperature

Figure 2.5B

Polyester

Insulation Resistance Vs. Temperature

Figure 2.5C

Polypropylene

Insulation Resistance Vs. Temperature

4.3TERMINAL STRENGTH

The leads are made of tinned copper wire. The terminals are capable of withstanding an axial load of

2.25 Kgs(5 lbs).

ENVIRONMENTAL

RESISTANCE TO HUMIDITY

The capacitor samples will be exposed to 93 ±2 °C for 56 days at 40 ±2 °C. After the test the

capacitance change shall be within 3% of the original value, The insulation resistance shall be within

50% of the initial limits and the dissipation factor shall remain within the initial specifications.

Sharma Film Capacitors

BOX SIZE BULK TAPED

T x H x L CARTON REEL PACK AMMO PACK

2.5 x 6.5 x 7.2 3000 2500 3500

3.0 x 6.5 x 7.2 3000 2100 2900

3.5 x 7.5 x 7.2 2000 1800 2500

4.5 x 9.5 x 7.2 1500 1400 1900

5.0 x 10.0 x 7.2 1000 1200 NA

6.0 x 11.0 x 7.2 2000 1000 NA

7.2 x 13.0 x 7.2 1500 800 NA

Taping Dimensions for MKT 050 Series (5mm Pitch)

DESCRIPTION DIMENSION TOLERANCES

mm Inches mm Inches

d Lead wire dia. 0.5 to 0.6 0.020 to 0.024 ±0.05 ±0.002

P Taping pitch 12.7 0.500 ±1 ±0.039

P0 Sprocket hole pitch 12.7 0.500 ±0.2 ±0.008

P1 Centering of lead wire 3.85 0.152 ±0.7 ±0.028

P2 Centering of the body 6.35 0.250 ±1.3 ±0.051

p Lead spacing 5 0.197 +0.6/ -1.1+0.024/ -0.043

dS Component alignment 0 0.000 ±2 ±0.079

H Height from Sproket 16.0, 16.5 0.630, 0.650 ±0.5 ±0.020

Center to component body or 18.5 or 0.728

W Tape width 18 0.709 +1.0/ -0.5+0.039/ -0.020

W0 Width of adhesive tape 6 min. 0.236 min.

W1 Sprocket hole alignment 9 0.354 ±0.5 ±0.020

D0 Position hole diameter 4 0.157 ±0.2 ±0.008

t Tape thickness 0.7 0.028 ±0.2 ±0.008

Packaging Specifications

Bulk, Tape/Reel & Ammo Pack

INTRODUCTION

The MKT 050 Series Metallized Polyester Film Capacitors are miniature capacitors with 5 mm

lead spacing. This series covers a wide range of values and voltages and exhibit excellent

high frequency characteristics. In addition to specific applications such as Blocking, By-

passing and Coupling, this series is widely used in all General Purpose applications.

FEATURES

•Wide value and Voltage range

•Ultra miniature size

•Flame retardant case and potting

•Consistent dimensions and surface finish due to molded case construction

•Available in tape & reel form for automatic insertion

•Self healing capability

GENERAL SPECIFICATIONS:

Dissipation factor:

For capacitance

≤

0.1 µF

= 0.010 max at 1 KHz, 0.015 max at 10 KHz,

0.030 max at 100 KHz.

For capacitance > 0.1 µF

= 0.0010 max at 1 KHz, 0.0015 max at

10 KHz. Insulation resistance:

For nominal voltage < 100 V DC;

≥10,000 M Ohms

for C≤0.10 µF, ≥1,000 seconds for C> 0.10 µF.

For nominal voltage

≤

100 V DC;

≥30,000

M Ohms for C≤0.10 µF, ≥1,000 seconds for C> 0.10 µF at a temperature of 25 ±5°C.

Capacitance tolerance:±5%(J), ±10%(K) and ±20%(M) Voltage Test:1.6 times the rated

voltage applied between terminals for 2 seconds at a temperature of 25 ±5 °C

Temperature range:-55 to 100 °C with derating above 85 °C Climatic category:F M D

DIMENSIONS

AND

TOLERANCES:

"d"=0.5 to 0.6mm

(0.020 to 0.024")

for dimension

“T”≤3.5mm

(0.138”)

"d"=0.6 mm (0.024")

for dimension “T” >3.5mm (0.138”)

"LL''=4.0 +1.5mm(0.16 +0.06")for Bulk Supply

MKT 050SERIES

FFoorrmmeerrllyy MMKKTT 11..8855 sseerriieess

RATED Capacitance dv/dt

VOLTAGE RangeµF value

50 0.001-1.0 4

63 0.001-1.0 8

100 >0.0068 10

100 0.0033-0.0068 15

100 >0.0033 30

250 0.001-1.0 20

400 0.001-1.0 40

PULSE RISE TIME (dv/dt) Volts per µsec.

LIFE TEST DETAILS:

Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 °C for 1000 hours. After the test:

1. Capacitance change shall remain within ±5%.

2. Dissipation Factor shall be within 1.5 times the original limits.

3. Insulation Resistance shall be above 50% of the initial limits.

4. There shall be no remarkable change in the appearance and the marking shall remain legible.

Sharma Film Capacitors

MKT 050SERIES CASEDIMENSIONS

Voltage 50 V DC / 30 V AC 63 V DC / 40 V AC 100 V DC / 63 V AC 250 V DC / 160 V AC 400 V DC / 200 V AC

Cap Value Dimensions in MM Dimensions in MM Dimensions in MM DIMENSIONS IN MM DIMENSIONS IN MM

in µF L H T S L H T S L H T S L H T S L H T S

0.001 7.2 6.5 2.5 5.0 7.2 6.5 2.5 5.0

0.0015 7.2 6.5 2.5 5.0 7.2 6.5 2.5 5.0

0.0022 7.2 6.5 2.5 5.0 7.2 6.5 2.5 5.0

0.0033 7.2 6.5 2.5 5.0 7.2 6.5 2.5 5.0

0.0047 7.2 6.5 2.5 5.0 7.2 6.5 2.5 5.0

0.0068 7.2 6.5 2.5 5.0 7.2 6.5 2.5 5.0 7.2 6.5 3.0 5.0

0.01 7.2 6.5 2.5 5.0 7.2 6.5 2.5 5.0 7.2 7.5 3.5 5.0

0.015 7.2 6.5 2.5 5.0 7.2 6.5 2.5 5.0 7.2 9.5 4.5 5.0

0.022 7.2 6.5 2.5 5.0 7.2 6.5 3.0 5.0 7.2 9.5 4.5 5.0

0.033 7.2 6.5 2.5 5.0 7.2 7.5 3.5 5.0 7.2 10.0 5.0 5.0

0.047 7.2 6.5 2.5 5.0 7.2 6.5 3.0 5.0 7.2 9.5 4.5 5.0 7.2 11.0 6.0 5.0

0.068 7.2 6.5 2.5 5.0 7.2 7.5 3.5 5.0 7.2 9.5 4.5 5.0

0.1 7.2 6.5 2.5 5.0 7.2 6.5 2.5 5.0 7.2 9.5 4.5 5.0 7.2 11.0 6.0 5.0

0.15 7.2 6.5 3.0 5.0 7.2 7.5 3.5 5.0 7.2 10.0 5.0 5.0 7.2 13.0 7.2 5.0

0.22 7.2 7.5 3.5 5.0 7.2 7.5 3.5 5.0 7.2 11.0 6.0 5.0 7.2 13.0 7.2 5.0

0.33 7.2 7.5 3.5 5.0 7.2 9.5 4.5 5.0

0.47 7.2 9.5 4.5 5.0 7.2 10.0 5.0 5.0

0.68 7.2 10.0 5.0 5.0 7.2 11.0 6.0 5.0

1.0 7.2 11.0 6.0 5.0

Voltage 50 V DC / 30 V AC 63 V DC / 40 V AC 100 V DC / 63 V AC 250 V DC / 160 V AC 400 V DC / 200 V AC

Cap Value Dimensions in Inches Dimensions in Inches Dimensions in Inches Dimensions in Inches Dimensions in Inches

in µF L H T S L H T S L H T S L H T S L H T S

0.001 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197

0.0015 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197

0.0022 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197

0.0033 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197

0.0047 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197

0.0068 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.283 0.256 0.118 0.197

0.01 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.283 0.295 0.138 0.197

0.015 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.283 0.374 0.177 0.197

0.022 0.283 0.256 0.098 0.197 0.283 0.256 0.118 0.197 0.283 0.374 0.177 0.197

0.033 0.283 0.256 0.098 0.197 0.283 0.295 0.138 0.197 0.283 0.394 0.197 0.197

0.047 0.283 0.256 0.098 0.197 0.283 0.256 0.118 0.197 0.283 0.374 0.177 0.197 0.283 0.433 0.236 0.197

0.068 0.283 0.256 0.098 0.197 0.283 0.295 0.138 0.197 0.283 0.374 0.177 0.197

0.1 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.283 0.374 0.177 0.197 0.283 0.433 0.236 0.197

0.15 0.283 0.256 0.118 0.197 0.283 0.295 0.138 0.197 0.283 0.394 0.197 0.197 0.283 0.512 0.283 0.197

0.22 0.283 0.295 0.138 0.197 0.283 0.295 0.138 0.197 0.283 0.433 0.236 0.197 0.283 0.512 0.283 0.197

0.33 0.283 0.295 0.138 0.197 0.283 0.374 0.177 0.197

0.47 0.283 0.374 0.177 0.197 0.283 0.394 0.197 0.197

0.68 0.283 0.394 0.197 0.197 0.283 0.433 0.236 0.197

1.0 0.283 0.433 0.236 0.197

Case Dimensions in Millimeters 50V • 63V • 100V • 250V • 400V

Case Dimensions in Inches 50V • 63V • 100V • 250V • 400V

Sharma Film Capacitors

Voltage 100 V DC / 63 V AC 160 V DC / 90 V AC 250 V DC / 160 V AC 400 V DC / 200 V AC 630 V DC / 220 V AC 1000 V DC / 250 V AC

Cap Value Dimensions in Millimeters Dimensions in Millimeters Dimensions in Millimeters Dimensions in Millimeters Dimensions in Millimeters Dimensions in Millimeters

in µF L H T S L H T S L H T S L H T S L H T S L H T S

0.001 13.0 9.0 4.0 10.0

0.0015 13.0 9.0 4.0 10.0

0.0022 13.0 9.0 4.0 10.0

0.0033 13.0 9.0 4.0 10.0

0.0047 13.0 9.0 4.0 10.0 13.0 11.0 5.0 10.0

0.0068 13.0 9.0 4.0 10.0 13.0 12.0 6.0 10.0

0.01 13.0 9.0 4.0 10.0 18.0 11.0 5.0 15.0

0.015 13.0 9.0 4.0 10.0 13.0 11.0 5.0 10.0 18.0 11.0 5.0 15.0

0.022 13.0 9.0 4.0 10.0 13.0 12.0 6.0 10.0 18.0 13.5 7.5 15.0

0.033 13.0 9.0 4.0 10.0 13.0 11.0 5.0 10.0 18.0 11.0 5.0 15.0 26.5 15.0 6.0 22.5

0.047 13.0 9.0 4.0 10.0 18.0 11.0 5.0 15.0 18.0 12.0 6.0 15.0 26.5 15.0 6.0 22.5

0.068 13.0 9.0 4.0 10.0 18.0 11.0 5.0 15.0 18.0 13.5 7.5 15.0 26.5 16.0 7.0 22.5

0.1 13.0 9.0 4.0 10.0 18.0 11.0 5.0 15.0 18.0 12.0 6.0 15.0 26.5 15.0 6.0 22.5 26.5 18.5 10.0 22.5

0.15 13.0 9.0 4.0 10.0 13.0 11.0 5.0 10.0 18.0 11.0 5.0 15.0 18.0 13.5 7.5 15.0 26.5 16.0 7.0 22.5 32.0 20.0 11.0 27.5

0.22 13.0 11.0 5.0 10.0 13.0 11.0 5.0 10.0 18.0 11.0 5.0 15.0 26.5 15.0 6.0 22.5 26.5 17.0 8.5 22.5 32.0 22.0 13.0 27.5

0.33 18.0 11.0 5.0 15.0 18.0 11.0 5.0 15.0 18.0 12.0 6.0 15.0 26.5 16.0 7.0 22.5 32.0 20.0 11.0 27.5

0.47 18.0 11.0 5.0 15.0 18.0 12.0 6.0 15.0 26.5 15.0 6.0 22.5 26.5 17.0 8.5 22.5 32.0 22.0 13.0 27.5

0.68 18.0 12.0 6.0 15.0 18.0 13.5 7.5 15.0 26.5 16.0 7.0 22.5 32.0 17.0 9.0 27.5

1.0 18.0 13.5 7.5 15.0 18.0 14.5 8.5 15.0 26.5 17.0 8.5 22.5 32.0 20.0 11.0 27.5

1.5 26.5 16.0 7.0 22.5 26.5 17.0 8.5 22.5 32.0 17.0 9.0 27.5

2.2 26.5 17.0 8.5 22.5 26.5 18.5 10.0 22.5 32.0 20.0 11.0 27.5

3.3 26.5 18.5 10.0 22.5 32.0 20.0 11.0 27.5 32.0 22.0 13.0 27.5

4.7 32.0 20.0 11.0 27.5 32.0 22.0 13.0 27.5

6.8 32.0 22.0 13.0 27.5

INTRODUCTION:

The MKT 100 Series Metallized Polyester Film Capacitors cover a wide range of

values and voltages. These capacitors also have good high frequency characteristics.

In addition to some specific applications such as Blocking, By-passing and Coupling,

this series is widely used in all General Purpose applications.

FEATURES:

•Wide value and Voltage range

•Flame retardant case and potting

•Consistent dimensions and surface finish due to molded case construction

•Self healing capability

MKT 100SERIES

FFoorrmmeerrllyy MMKKTT 11..6600 sseerriieess

DIMENSIONS

AND

TOLERANCES:

"d" - 0.8 mm (0.032"))

"LL'' - 6.0 ±1.0mm (0.24 ±

0.04")

Tolerance on "s" ±0.4mm

(0.016")

GENERAL SPECIFICATIONS:

Dissipation factor:≤0.0150 at 10K Hz for capacitance ≤1.0 µF ≤0.0100 at 1 K

Hz for capacitance> 1.0 µF Insulation resistance:For nominal voltage > 100 V

DC, ≥30,000 M Ohms for C≤0.33 µF, ≥10,000 seconds for C> 0.33 µF, For

nominal voltage ≤100 V DC, ≥10,000 M Ohms for C≤0.10 µF, ≥1,000 seconds for

C> 0.10 µF at a temperature of 25 ±5 °C. Capacitance tolerance:±5%(J),

±10%(K) and ±20%(M). Voltage Test:1.6 times the rated voltage applied between

terminals for 2 seconds at a temperature of 25 ±5 °C. Temperature range:-55 to

100 °C with derating above 85 °C. Climatic category:F M D

RATED LEAD SPACING mm (inches)

VOLTAGE 10.0 (0.40) 15.0 (0.60) 22.5 (0.89) 27.5 (1.08)

100 6 3 2 1

160 8 5 3 2

250 11 7 4 3

400 20 10 5.5 5

630 30 15 8 7

1000 60 25 15 10

PULSE RISE TIME (dv/dt) Volts per µsec.

LIFE TEST DETAILS:

Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 °C for 1000 hours. After the test:

1. Capacitance change shall remain within ±5%.

2. Dissipation Factor shall be within 1.5 times the original limits.

3. Insulation Resistance shall be above 50% of the initial limits.

4. There shall be no remarkable change in the appearance and the marking shall remain legible.

Case Dimensions in Millimeters 100V • 160V• 250V• 400V• 630V• 1000V

Sharma Film Capacitors

Voltage 100 V DC / 63 V AC 160 V DC / 90 V AC 250 V DC / 160 V AC 400 V DC / 200 V AC 630 V DC / 220 V AC 1000 V DC / 250 V AC

Cap Value Dimensions in Inches Dimensions in Inches Dimensions in Inches Dimensions in Inches Dimensions in Inches Dimensions in Inches

in µF L H T S L H T S L H T S L H T S L H T S L H T S

0.001 0.512 0.354 0.157 0.394

0.0015 0.512 0.354 0.157 0.394

0.0022 0.512 0.354 0.157 0.394

0.0033 0.512 0.354 0.157 0.394

0.0047 0.512 0.354 0.157 0.394 0.512 0.433 0.197 0.394

0.0068 0.512 0.354 0.157 0.394 0.512 0.472 0.236 0.394

0.001 0.512 0.354 0.157 0.394 0.709 0.433 0.197 0.591

0.015 0.512 0.354 0.157 0.394 0.512 0.433 0.197 0.394 0.709 0.433 0.197 0.591

0.022 0.512 0.354 0.157 0.394 0.512 0.472 0.236 0.394 0.709 0.531 0.295 0.591

0.033 0.512 0.354 0.157 0.394 0.512 0.433 0.197 0.394 0.709 0.433 0.197 0.591 1.043 0.591 0.236 0.886

0.047 0.512 0.354 0.157 0.394 0.709 0.433 0.197 0.591 0.709 0.472 0.236 0.591 1.043 0.591 0.236 0.886

0.068 0.512 0.354 0.157 0.394 0.709 0.433 0.197 0.591 0.709 0.531 0.295 0.591 1.043 0.630 0.276 0.886

0.1 0.512 0.354 0.157 0.394 0.709 0.433 0.197 0.591 0.709 0.472 0.236 0.591 1.043 0.591 0.236 0.886 1.043 0.728 0.394 0.886

0.15 0.512 0.354 0.157 0.394 0.512 0.433 0.197 0.394 0.709 0.433 0.197 0.591 0.709 0.531 0.295 0.591 1.043 0.630 0.276 0.886 1.260 0.787 0.433 1.083

0.22 0.512 0.433 0.197 0.394 0.512 0.433 0.197 0.394 0.709 0.433 0.197 0.591 1.043 0.591 0.236 0.886 1.043 0.669 0.335 0.886 1.260 0.866 0.512 1.083

0.33 0.709 0.433 0.197 0.591 0.709 0.433 0.197 0.591 0.709 0.472 0.236 0.591 1.043 0.630 0.276 0.886 1.260 0.787 0.433 1.083

0.47 0.709 0.433 0.197 0.591 0.709 0.472 0.236 0.591 1.043 0.591 0.236 0.886 1.043 0.669 0.335 0.886 1.260 0.866 0.512 1.083

0.68 0.709 0.472 0.236 0.591 0.709 0.531 0.295 0.591 1.043 0.630 0.276 0.886 1.260 0.669 0.354 1.083

1.0 0.709 0.531 0.295 0.591 0.709 0.571 0.335 0.591 1.043 0.669 0.335 0.886 1.260 0.787 0.433 1.083

1.5 1.043 0.630 0.276 0.886 1.043 0.669 0.335 0.886 1.260 0.669 0.354 1.083

2.2 1.043 0.669 0.335 0.886 1.043 0.728 0.394 0.886 1.260 0.787 0.433 1.083

3.3 1.043 0.728 0.394 0.886 1.260 0.787 0.433 1.083 1.260 0.866 0.512 1.083

4.7 1.260 0.787 0.433 1.083 1.260 0.866 0.512 1.083

6.8 1.260 0.866 0.512 1.083

Case Dimensions in Inches 100V • 160V• 250V• 400V• 630V• 1000V

INTRODUCTION:

The MKT 075 Series Metallized Polyester Film Capacitors are specially designed for use

in thickly populated Printed Circuit Boards where miniaturization is important. These

capacitors are widely used in all General Purpose applications.

FEATURES:

•Wide value and Voltage range

•Flame retardant case and potting

•Consistent dimensions and surface finish due to molded case construction

•Self healing capability

GENERAL SPECIFICATIONS:

Dissipation factor:≤0.015 at 10 K Hz for capacitance< 1.0 µF

Insulation resistance:For nominal voltage ≤100 V DC, ≥10,000 M Ohm for C≤

0.1µF, ≥1,000 seconds for C> 0.1µF, For nominal voltage > 100 V DC, ≥30,000 M

Ohm for C≤0.33µF, ≥10,000 seconds for C> 0.33µF. Capacitance tolerance:

±5%(J), ±10%(K)and ±10%(M)

Voltage Test :1.6 times the rated voltage applied between terminals for 2 seconds. at

temperature of 25 ±5 °C

Temperature range:-55 to 100 °C with derating above 85 °C

Climatic category:F M D

LIFE TEST DETAILS:

Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at

85 °C for 1000 hours. After the test:

1. Capacitance change shall remain within ±5%.

2. Dissipation Factor shall be within 1.5 times the original limits.

3. Insulation Resistance shall be above 50% of the initial limits.

4. There shall be no remarkable change in the appearance and the marking shall

remain legible.

RATED dv/dt - Volts-

VOLTAGE per µ Seconds

100 6

250 15

400 30

630 40

PULSE RISE TIME (dv/dt) Volts per µsec.

DIMENSIONS AND

TOLERANCES:

"d" - 0.6 mm (0.024")

for dimension “T” =

4mm (0.160”)

"d" - 0.8 mm (0.032")

for dimension "T" >

4mm (0.160")

"LL'' - 6.0 ±1.0mm

(0.24 ±0.04")

Tolerance on "s" ±0.4mm (0.016")

MKT 075SERIES

FFoorrmmeerrllyy MMKKTT 11..6677 sseerriieess

MKT 100SERIES CASE DIMENSIONS CONTINUED

Sharma Film Capacitors

INTRODUCTION:

The MKTD01 Series Metallized Polyester Film Capacitors cover a wide range of

values and voltages. They are suitable for applications such as Blocking, By-passing

and Coupling and are widely used in General communication equipment.

FEATURES:

•Wide value and Voltage range

•Self healing capability

•Flame retardant powder epoxy encapsulation

•Minimum overall dimensions due to dip coated construction

GENERAL SPECIFICATIONS:

Dissipation factor:< 0.0100 at 1 K Hz for capacitance ≤1.0 µF, < 0.0150 at 1 K Hz

for capacitance> 1.0 µF. Insulation resistance:For 100 VDC rated parts;

≥9,000 M Ohms for C ≤0.33 µF, ≥3,000 seconds for C> 0.33 µF, at a temperature

of 25 ±5 °C, For 250 to 630 VDC rated parts; ≥15,000 M Ohms for C ≤0.33 µF,

≥5,000 seconds for C> 0.33 µF, at a temperature of 25 ±5 °C.

Capacitance tolerance:±5%(J), ±10%(K) and ±20%(M) (Special parts with close

tolerance of ±1% and ±2% available on request)Voltage Test :1.6 times the rated

voltage applied between terminals for 2 seconds. at a temperature of 25 ±5 °C

Temperature range:-55 to 85 °C. Climatic category:F M F

LIFE TEST DETAILS:

Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied

at 85 °C for 1000 hours. After the test:

1. Capacitance change shall remain within ±5%.

2. Dissipation Factor shall be within 1.5 times the original limits.

3.Insulation Resistance shall be above 50% of the initial limits.

4. There shall be no remarkable change in the appearance and the marking

shall remain legible.

LEAD SPACING mm (inches)

Rated 10.0 15.0 22.5 27.0

Voltage (0.40) (0.60) (0.89) (1.06)

100 6 3 2 1

250 11 7 4 3

400 20 10 5.5 5

630 30 15 8 7

DIMENSIONS AND

TOLERANCES:

d - 0.6 mm (0.024")

for

Lead Spacing "s" =

10.0 mm (0.40")

d - 0.8 mm (0.032")

for

Lead Spacing "s" >

10.0 mm (0.40")

z - 1.5mm ( 0.06" )

max.

LL'' - 20.0 mm min.(0.78")

Tolerance on "s" ±1.0mm (0.04")

PULSE RISE TIME (dv/dt) Volts per µsec.

MKTD01SERIES

FFoorrmmeerrllyy MMPPDD 11 sseerriieess

VOLTAGE DC/AC

Capacitance 100 V DC / 63 V AC 250 V DC / 160 V AC

in µF Dimensions in Millimeters Dimensions in Millimeters

L H T S L H T S

0.01 10.5 9.0 4.0 7.5

0.015 10.5 9.0 4.0 7.5

0.022 10.5 9.0 4.0 7.5

0.033 10.5 9.0 4.0 7.5 10.5 9.0 4.0 7.5

0.047 10.5 9.0 4.0 7.5 10.5 9.0 4.0 7.5

0.068 10.5 9.0 4.0 7.5 10.5 11.0 5.0 7.5

0.1 10.5 9.0 4.0 7.5 10.5 11.0 5.0 7.5

0.15 10.5 9.0 4.0 7.5 10.5 12.0 6.0 7.5

0.22 10.5 11.0 5.0 7.5

0.33 10.5 12.0 6.0 7.5

VOLTAGE DC/AC

Capacitance 400 V DC / 200 V AC 630 V DC / 250 V AC

in µF Dimensions in Millimeters Dimensions in Millimeters

L H T S L H T S

0.001 10.5 9.0 4.0 7.5

0.0015 10.5 9.0 4.0 7.5

0.0022 10.5 9.0 4.0 7.5

0.0033 10.5 9.0 4.0 7.5

0.0047 10.5 9.0 4.0 7.5 10.5 9.0 4.0 7.5

0.0068 10.5 9.0 4.0 7.5 10.5 9.0 4.0 7.5

0.01 10.5 9.0 4.0 7.5 10.5 11.0 5.0 7.5

0.015 10.5 9.0 4.0 7.5 10.5 12.0 6.0 7.5

0.022 10.5 11.0 5.0 7.5

0.033 10.5 12.0 6.0 7.5

Case Dimensions in Millimeters100V • 250V

VOLTAGE DC/AC

Capacitance 100 V DC / 63 V AC 250 V DC / 160 V AC

in µF Dimensions in Inches Dimensions in Inches

L H T S L H T S

0.01 0.413 0.354 0.157 0.295

0.015 0.413 0.354 0.157 0.295

0.022 0.413 0.354 0.157 0.295

0.033 0.413 0.354 0.157 0.295 0.413 0.354 0.157 0.295

0.047 0.413 0.354 0.157 0.295 0.413 0.354 0.157 0.295

0.068 0.413 0.354 0.157 0.295 0.413 0.433 0.197 0.295

0.1 0.413 0.354 0.157 0.295 0.413 0.433 0.197 0.295

0.15 0.413 0.354 0.157 0.295 0.413 0.472 0.236 0.295

0.22 0.413 0.433 0.197 0.295

0.33 0.413 0.472 0.236 0.295

VOLTAGE DC/AC

Capacitance 400 V DC / 200 V AC 630 V DC / 250 V AC

in µF Dimensions in Inches Dimensions in Inches

L H T S L H T S

0.001 0.413 0.354 0.157 0.295

0.0015 0.413 0.354 0.157 0.295

0.0022 0.413 0.354 0.157 0.295

0.0033 0.413 0.354 0.157 0.295

0.0047 0.413 0.354 0.157 0.295 0.413 0.354 0.157 0.295

0.0068 0.413 0.354 0.157 0.295 0.413 0.354 0.157 0.295

0.01 0.413 0.354 0.157 0.295 0.413 0.433 0.197 0.295

0.015 0.413 0.354 0.157 0.295 0.413 0.472 0.236 0.295

0.022 0.413 0.433 0.197 0.295

0.033 0.413 0.472 0.236 0.295

Case Dimensions in Inches 100V • 250V

MKT 075SERIES CASE DIMENSIONS

Sharma Film Capacitors

VOLTAGE DC/AC

Capacitance 100 V DC / 63 V AC 250 V DC / 160 V AC

in µF Dimensions in Millimeters Dimensions in Millimeters

L H T S L H T S

0.01 12.5 8.5 4.5 10.0

0.015 12.5 9.0 4.5 10.0

0.022 12.5 9.0 4.5 10.0

0.033 12.5 9.0 4.5 10.0

0.047 12.5 9.5 5.0 10.0

0.068 12.5 9.5 5.0 10.0

0.1 12.5 9.5 5.0 10.0 12.5 10.0 5.5 10.0

0.15 12.5 10.0 5.0 10.0 18.0 10.5 5.5 15.0

0.22 12.5 10.0 5.5 10.0 18.0 11.5 6.5 15.0

0.33 18.0 10.5 5.5 15.0 18.0 12.5 7.0 15.0

0.47 18.0 11.5 6.0 15.0 26.0 12.5 7.0 22.5

0.68 18.0 12.0 6.5 15.0 26.0 14.5 8.0 22.5

1.0 18.0 14.0 7.5 15.0 26.0 16.0 9.0 22.5

1.5 26.0 14.0 7.5 22.5 31.0 17.0 9.5 27.0

2.2 26.0 16.0 9.0 22.5 31.0 19.0 11.5 27.0

3.3 26.0 19.0 11.0 22.5 31.0 23.0 14.0 27.0

4.7 31.0 23.0 12.0 27.0 31.0 27.0 16.5 27.0

6.8 31.0 25.0 14.0 27.0

VOLTAGE DC/AC

Capacitance 400 V DC / 200 V AC 630 V DC / 220 V AC

in µF Dimensions in Millimeters Dimensions in Millimeters

L H T S L H T S

0.01 12.5 9.0 4.5 10.0 12.5 9.0 4.5 10.0

0.015 12.5 9.5 4.5 10.0 12.5 9.5 5.0 10.0

0.022 12.5 9.5 5.0 10.0 12.5 10.5 6.0 10.0

0.033 12.5 10.5 5.5 10.0 18.0 11.0 6.0 15.0

0.047 12.5 10.5 6.0 10.0 18.0 11.5 6.5 15.0

0.068 18.0 10.5 6.0 15.0 18.0 12.5 7.0 15.0

0.1 18.0 11.5 6.5 15.0 26.0 13.0 7.0 22.5

0.15 26.0 12.5 6.0 22.5 26.0 14.0 8.5 22.5

0.22 26.0 13.5 7.0 22.5 26.0 16.5 10.0 22.5

0.33 26.0 15.5 8.5 22.5 31.0 17.5 10.5 27.0

0.47 26.0 18.0 9.5 22.5 31.0 19.5 12.0 27.0

0.68 31.0 17.5 10.0 27.0 31.0 22.5 15.0 27.0

1.0 31.0 20.0 12.0 27.0 31.0 27.5 19.0 27.0

1.5 31.0 23.5 13.5 27.0

2.2 31.0 26.0 16.5 27.0

Case Dimensions in Millimeters 100V • 250V • 400V • 630V

VOLTAGE DC/AC

Capacitance 100 V DC / 63 V AC 250 V DC / 160 V AC

in µF Dimensions in Inches Dimensions in Inches

L H T S L H T S

0.01 0.492 0.335 0.177 0.394

0.015 0.492 0.354 0.177 0.394

0.022 0.492 0.354 0.177 0.394

0.033 0.492 0.354 0.177 0.394

0.047 0.492 0.374 0.197 0.394

0.068 0.492 0.374 0.197 0.394

0.1 0.492 0.374 0.197 0.394 0.492 0.394 0.217 0.394

0.15 0.492 0.394 0.197 0.394 0.709 0.413 0.217 0.591

0.22 0.492 0.394 0.217 0.394 0.709 0.453 0.256 0.591

0.33 0.709 0.413 0.217 0.591 0.709 0.492 0.276 0.591

0.47 0.709 0.453 0.236 0.591 1.024 0.492 0.276 0.886

0.68 0.709 0.472 0.256 0.591 1.024 0.571 0.315 0.886

1.0 0.709 0.551 0.295 0.591 1.024 0.630 0.354 0.886

1.5 1.024 0.551 0.295 0.886 1.220 0.669 0.374 1.063

2.2 1.024 0.630 0.354 0.886 1.220 0.748 0.453 1.063

3.3 1.024 0.748 0.433 0.886 1.220 0.906 0.551 1.063

4.7 1.220 0.906 0.472 1.063 1.220 1.063 0.650 1.063

6.8 1.220 0.984 0.551 1.063

VOLTAGE DC/AC

Capacitance 400 V DC / 200 V AC 630 V DC / 220 V AC

in µF Dimensions in Inches Dimensions in Inches

L H T S L H T S

0.01 0.492 0.354 0.177 0.394 0.492 0.354 0.177 0.394

0.015 0.492 0.374 0.177 0.394 0.492 0.374 0.197 0.394

0.022 0.492 0.374 0.197 0.394 0.492 0.413 0.236 0.394

0.033 0.492 0.413 0.217 0.394 0.709 0.433 0.236 0.591

0.047 0.492 0.413 0.236 0.394 0.709 0.453 0.256 0.591

0.068 0.709 0.413 0.236 0.591 0.709 0.492 0.276 0.591

0.1 0.709 0.453 0.256 0.591 1.024 0.512 0.276 0.886

0.15 1.024 0.492 0.236 0.886 1.024 0.551 0.335 0.886

0.22 1.024 0.531 0.276 0.886 1.024 0.650 0.394 0.886

0.33 1.024 0.610 0.335 0.886 1.220 0.689 0.413 1.063

0.47 1.024 0.709 0.374 0.886 1.220 0.768 0.472 1.063

0.68 1.220 0.689 0.394 1.063 1.220 0.886 0.591 1.063

1.0 1.220 0.787 0.472 1.063 1.220 1.083 0.748 1.063

1.5 1.220 0.925 0.531 1.063

2.2 1.220 1.024 0.650 1.063

Case Dimensions in Inches 100V • 250V • 400V • 630V

INTRODUCTION:

The MKTD02 Series Metallized Polyester Film Capacitors cover a wide range of values

and voltages. This series has lead spacing starting from 7.5mm. and covers more values

than the conventional series. They are suitable for applications such as Blocking, By-

passing and Coupling and are widely used in General communication equipment.

FEATURES:

•Wide value and Voltage range

•Self healing capability

•Flame retardant powder epoxy encapsulation

•Minimum overall dimensions due to dip coated construction

GENERAL SPECIFICATIONS:

Dissipation factor:< 0.0100 at 1 K Hz for capacitanc e≤1.0 µF, < 0.0150 at 1 K Hz

for capacitance> 1.0 µF. Insulation resistance:For 100 VDC rated parts;

≥9,000 M Ohms for C≤0.33 µF, ≥3,000 seconds for C> 0.33 µF at a temperature of

25 ±5 °C. For 250 to 630 VDC rated parts ; ≥15,000 M Ohms for C≤0.33 µF,

≥5,000 seconds for C> 0.33 µF at a temperature of 25 ±5 °C.

Capacitance tolerance:±5%(J), ±10%(K) and ±20%(M) Voltage Test :1.6 times the

rated voltage applied between terminals for 2 seconds. at a temperature of 25 ±5 °C.

Temperature range:-55 to 85 °C Climatic category:F M F

LEAD SPACING mm (inches)

Rated 7.5 10.0 15.0 22.5 27.5

Voltage (0.30) (0.40) (0.60) (0.89) (1.08)

100 6 6 3 2 1

250 15 11 7 4 3

400 30 20 10 5.5 5

630 40 30 15 8 7

DIMENSIONS AND

TOLERANCES:

d - 0.6 mm (0.024")

for

Lead Spacing "s" =

10.0 mm (0.40")

d - 0.8 mm (0.032")

for

Lead Spacing "s" >

10.0 mm (0.40")

z - 1.5mm ( 0.06" )

max.

LL'' - 20.0 mm min.(0.78")

Tolerance on "s" ±1.0mm (0.04")

PULSE RISE TIME (dv/dt) Volts per µsec.

MKT D02SERIES

FFoorrmmeerrllyy MMPPDD 22 sseerriieess

LIFE TEST DETAILS:

Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 °C for 1000 hours. After the test:

1. Capacitance change shall remain within ±5%.

2. Dissipation Factor shall be within 1.5 times the original limits.

3. Insulation Resistance shall be above 50% of the initial limits.

4. There shall be no remarkable change in the appearance and the marking shall remain legible.

MKTD01SERIES CASE DIMENSIONS

Sharma Film Capacitors

VOLTAGE DC/AC

Capacitance 100 V DC / 63 V AC 250 V DC / 160 V AC

in µF Dimensions in Millimeters Dimensions in Millimeters

L H T S L H T S

0.01 10.5 7.5 5.0 7.5

0.012 10.5 8.0 4.5 7.5

0.015 10.5 8.0 4.5 7.5

0.018 10.5 8.0 4.5 7.5

0.022 10.5 7.5 4.5 7.5 10.5 8.0 4.5 7.5

0.027 10.5 7.5 4.5 7.5 10.5 8.5 5.0 7.5

0.033 10.5 7.5 4.5 7.5 10.5 9.0 5.5 7.5

0.039 10.5 7.5 4.5 7.5 10.5 9.0 5.5 7.5

0.047 10.5 7.5 4.5 7.5 13.0 9.5 5.5 10.0

0.056 10.5 7.5 4.5 7.5 13.0 10.0 6.0 10.0

0.068 10.5 7.5 4.5 7.5 18.0 9.5 5.5 15.0

0.082 10.5 7.5 4.5 7.5 18.0 10.5 5.5 15.0

0.1 10.5 7.5 4.5 7.5 18.0 11.0 6.0 15.0

0.12 10.5 8.5 5.0 7.5 18.0 11.5 6.5 15.0

0.15 10.5 9.0 5.5 7.5 18.0 12.0 7.0 15.0

0.18 13.0 9.0 4.5 10.0 18.0 12.5 7.5 15.0

0.22 13.0 9.5 5.0 10.0 21.0 11.5 6.5 17.5

0.27 13.0 9.5 5.5 10.0 21.0 12.0 7.0 17.5

0.33 13.0 10.0 6.0 10.0 21.0 12.5 8.0 17.5

0.39 13.0 10.5 6.5 10.0 21.0 13.5 8.0 17.5

0.47 13.0 11.0 7.0 10.0 21.0 14.5 8.0 17.5

0.56 18.0 10.5 5.5 15.0 29.0 14.0 7.5 25.0

0.68 18.0 11.0 6.0 15.0 29.0 15.0 8.0 25.0

0.82 18.0 11.5 6.5 15.0 29.0 15.5 9.0 25.0

1.0 18.0 12.0 7.0 15.0 29.0 18.5 9.0 25.0

1.2 18.0 13.0 7.5 15.0 29.0 19.5 9.5 25.0

1.5 18.0 14.0 8.5 15.0 29.0 20.5 10.5 25.0

1.8 21.0 14.0 8.5 17.5 29.0 21.5 12.0 25.0

2.2 21.0 15.0 9.0 17.5 29.0 22.5 13.0 25.0

2.7 21.0 16.0 10.0 17.5

3.3 21.0 17.5 10.5 17.5

3.9 21.0 18.5 11.0 17.5

VOLTAGE DC/AC

CAPACITANCE 400 V DC / 200 V AC 630 V DC / 220 V AC

in µF Dimensions in Millimeters Dimensions in Millimeters

L H T S L H T S

0.01 10.5 7.5 5.0 7.5 18.0 8.5 5.0 15.0

0.012 10.5 8.0 4.5 7.5 18.0 8.5 4.5 15.0

0.015 10.5 8.0 4.5 7.5 18.0 9.0 5.0 15.0

0.018 18.0 8.0 4.5 15.0 18.0 9.5 5.5 15.0

0.022 18.0 8.5 4.5 15.0 18.0 10.5 5.5 15.0

0.027 18.0 9.0 5.0 15.0 18.0 10.5 6.5 15.0

0.033 18.0 9.5 5.5 15.0 18.0 11.0 7.0 15.0

0.039 18.0 10.0 6.0 15.0 21.0 10.5 6.0 17.5

0.047 18.0 10.5 6.5 15.0 21.0 11.0 6.0 17.5

0.056 18.0 11.0 7.0 15.0 21.0 11.5 6.5 17.5

0.068 18.0 11.5 7.5 15.0 21.0 12.0 7.0 17.5

0.082 21.0 11.0 6.0 17.5 21.0 12.5 8.0 17.5

0.1 21.0 11.5 6.5 17.5 21.0 14.5 8.5 17.5

0.12 21.0 12.0 7.0 17.5 21.0 15.5 9.0 17.5

0.15 21.0 13.0 8.0 17.5 29.0 14.0 8.5 25.0

0.18 21.0 14.5 8.0 17.5 29.0 15.5 9.0 25.0

0.22 21.0 15.0 8.5 17.5 29.0 16.0 9.0 25.0

0.27 21.0 16.0 9.5 17.5 29.0 18.5 9.0 25.0

0.33 29.0 15.0 8.5 25.0 31.0 19.0 9.5 27.5

0.39 29.0 16.0 9.5 25.0 31.0 20.0 10.5 27.5

0.47 29.0 16.5 10.0 25.0 31.0 21.0 11.5 27.5

0.56 29.0 19.5 10.0 25.0

0.68 29.0 20.5 11.0 25.0

0.82 29.0 21.5 12.0 25.0

1.0 29.0 23.0 13.0 25.0

Case Dimensions in Millimeters 100V • 250V • 400V • 630V

VOLTAGE DC/AC

CAPACITANCE 100 V DC / 63 V AC 250 V DC / 160 V AC

in µF Dimensions in Inches Dimensions in Inches

L H T S L H T S

0.01 0.413 0.295 0.197 0.295

0.012 0.413 0.315 0.177 0.295

0.015 0.413 0.315 0.177 0.295

0.018 0.413 0.315 0.177 0.295

0.022 0.413 0.295 0.177 0.295 0.413 0.315 0.177 0.295

0.027 0.413 0.295 0.177 0.295 0.413 0.335 0.197 0.295

0.033 0.413 0.295 0.177 0.295 0.413 0.354 0.217 0.295

0.039 0.413 0.295 0.177 0.295 0.413 0.354 0.217 0.295

0.047 0.413 0.295 0.177 0.295 0.512 0.374 0.217 0.394

0.056 0.413 0.295 0.177 0.295 0.512 0.394 0.236 0.394

0.068 0.413 0.295 0.177 0.295 0.709 0.374 0.217 0.591

0.082 0.413 0.295 0.177 0.295 0.709 0.413 0.217 0.591

0.1 0.413 0.295 0.177 0.295 0.709 0.433 0.236 0.591

0.12 0.413 0.335 0.197 0.295 0.709 0.453 0.256 0.591

0.15 0.413 0.354 0.217 0.295 0.709 0.472 0.276 0.591

0.18 0.512 0.354 0.177 0.394 0.709 0.492 0.295 0.591

0.22 0.512 0.374 0.197 0.394 0.827 0.453 0.256 0.689

0.27 0.512 0.374 0.217 0.394 0.827 0.472 0.276 0.689

0.33 0.512 0.394 0.236 0.394 0.827 0.492 0.315 0.689

0.39 0.512 0.413 0.256 0.394 0.827 0.531 0.315 0.689

0.47 0.512 0.433 0.276 0.394 0.827 0.571 0.315 0.689

0.56 0.709 0.413 0.217 0.591 1.142 0.551 0.295 0.984

0.68 0.709 0.433 0.236 0.591 1.142 0.591 0.315 0.984

0.82 0.709 0.453 0.256 0.591 1.142 0.610 0.354 0.984

1.0 0.709 0.472 0.276 0.591 1.142 0.728 0.354 0.984

1.2 0.709 0.512 0.295 0.591 1.142 0.768 0.374 0.984

1.5 0.709 0.551 0.335 0.591 1.142 0.807 0.413 0.984

1.8 0.827 0.551 0.335 0.689 1.142 0.846 0.472 0.984

2.2 0.827 0.591 0.354 0.689 1.142 0.886 0.512 0.984

2.7 0.827 0.630 0.394 0.689

3.3 0.827 0.689 0.413 0.689

3.9 0.827 0.728 0.433 0.689

VOLTAGE DC/AC

CAPACITANCE 400 V DC / 200 V AC 630 V DC / 220 V AC

in µF Dimensions in Inches Dimensions in Inches

L H T S L H T S

0.01 0.413 0.295 0.197 0.295 0.709 0.335 0.197 0.591

0.012 0.413 0.315 0.177 0.295 0.709 0.335 0.177 0.591

0.015 0.413 0.315 0.177 0.295 0.709 0.354 0.197 0.591

0.018 0.709 0.315 0.177 0.591 0.709 0.374 0.217 0.591

0.022 0.709 0.335 0.177 0.591 0.709 0.413 0.217 0.591

0.027 0.709 0.354 0.197 0.591 0.709 0.413 0.256 0.591

0.033 0.709 0.374 0.217 0.591 0.709 0.433 0.276 0.591

0.039 0.709 0.394 0.236 0.591 0.827 0.413 0.236 0.689

0.047 0.709 0.413 0.256 0.591 0.827 0.433 0.236 0.689

0.056 0.709 0.433 0.276 0.591 0.827 0.453 0.256 0.689

0.068 0.709 0.453 0.295 0.591 0.827 0.472 0.276 0.689

0.082 0.827 0.433 0.236 0.689 0.827 0.492 0.315 0.689

0.1 0.827 0.453 0.256 0.689 0.827 0.571 0.335 0.689

0.12 0.827 0.472 0.276 0.689 0.827 0.610 0.354 0.689

0.15 0.827 0.512 0.315 0.689 1.142 0.551 0.335 0.984

0.18 0.827 0.571 0.315 0.689 1.142 0.610 0.354 0.984

0.22 0.827 0.591 0.335 0.689 1.142 0.630 0.354 0.984

0.27 0.827 0.630 0.374 0.689 1.142 0.728 0.354 0.984

0.33 1.142 0.591 0.335 0.984 1.220 0.748 0.374 1.083

0.39 1.142 0.630 0.374 0.984 1.220 0.787 0.413 1.083

0.47 1.142 0.650 0.394 0.984 1.220 0.827 0.453 1.083

0.56 1.142 0.768 0.394 0.984

0.68 1.142 0.807 0.433 0.984

0.82 1.142 0.846 0.472 0.984

1.0 1.142 0.906 0.512 0.984

Case Dimensions in Inches 100V • 250V • 400V • 630V

MKT D02SERIES CASE DIMENSIONS

Sharma Film Capacitors

INTRODUCTION:

The MKTD03 Series Metallized Polyester Film Capacitors cover a wide range of

values and voltages. This series provides alternative dimensions for the same

values covered by the other MKTD series. These capacitors are suitable for

applications such as Blocking, By-passing and Coupling and are widely used in

General communication equipment.

FEATURES:

•Wide value and Voltage range

•Self healing capability

•Flame retardant powder epoxy encapsulation

•Minimum overall dimensions due to dip coated construction

GENERAL SPECIFICATIONS:

Dissipation factor:< 0.0100 at 1 K Hz for capacitance≤1.0 µF, < 0.0150 at 1 K

Hz for capacitance> 1.0 µF. Insulation resistance:For 100 VDC rated parts;

≥9,000 M Ohms for C≤0.33 µF, ≥3,000 seconds for C> 0.33 µF at a

temperature of 25 ±5 °C. For 250 to 630 VDC rated parts; ≥15,000 M Ohms for

C≤0.33 µF, ≥5,000 seconds for C> 0.33 µF at a temperature of 25 ±5 °C

Capacitance tolerance:±5%(J), ±10%(K) and ±20%(M). Voltage Test :1.6

times the rated voltage applied between terminals for 2 seconds. at a temperature

of 25 ±5 °C. Temperature range:-55 to 85 °C. Climatic category: F M F

LEAD SPACING mm (inches)

Rated 10.0 15.0 22.5 27.0

Voltage (0.40) (0.60) (0.89) (1.06)

100 6 3 2 1

250 11 7 4 3

400 20 10 5.5 5

630 30 15 8 7

DIMENSIONS AND

TOLERANCES:

d - 0.6 mm (0.024") for

Lead Spacing "s" = 10.0

mm (0.40")

d - 0.8 mm (0.032") for

Lead Spacing "s" > 10.0

mm (0.40")

z - 1.5mm ( 0.06" ) max.

LL'' - 20.0 mm

min.(0.78")

Tolerance on "s" ±

1.0mm (0.04") for s ≤15mm(0.6”).

Tolerance on "s" ±1.5mm (0.06") for s ≤20mm(0.78”).

Tolerance on "s" ±2.0mm (0.08") for s ≤27.5mm(1.08”).

PULSE RISE TIME (dv/dt) Volts per µsec.

MKT D03SERIES

FFoorrmmeerrllyy MMPPDD 33 sseerriieess

VOLTAGE DC/AC

Capacitance 100 V DC / 63 V AC 250 V DC / 160 V AC

in µF Dimensions in Millimeters Dimensions in Millimeters

L H T S L H T S

0.01 13.0 10.0 5.5 10.0 13.0 10.0 5.5 10.0

0.015 13.0 10.0 6.0 10.0 13.0 10.0 6.0 10.0

0.022 13.0 10.0 6.0 10.0 13.0 10.0 6.0 10.0

0.033 13.0 10.0 6.0 10.0 13.0 10.0 6.0 10.0

0.047 13.0 10.0 6.0 10.0 13.0 10.0 6.0 10.0

0.068 13.0 11.0 6.5 10.0 13.0 11.0 6.5 10.0

0.1 13.0 12.5 7.0 10.0 13.0 12.5 7.0 10.0

0.15 13.0 12.5 8.0 10.0 13.0 12.5 8.0 10.0

0.22 13.0 12.5 8.0 10.0 18.0 13.0 7.0 15.0

0.33 13.5 14.0 9.0 10.0 18.0 14.0 8.0 15.0

0.47 13.5 15.0 10.0 10.0 18.0 16.0 9.5 15.0

0.68 18.0 13.5 8.0 15.0 24.0 14.0 9.5 20.0

1.0 18.0 16.5 9.5 15.0 24.0 18.0 10.5 20.0

1.5 18.0 19.0 11.5 15.0 24.0 23.0 13.5 20.0

2.2 24.0 21.0 12.5 20.0 30.0 23.0 13.5 27.5

3.3 24.0 22.0 13.0 20.0 30.0 24.0 16.5 27.5

4.7 30.0 23.5 14.0 27.5 33.0 24.0 18.0 30.0

6.8 30.0 24.0 15.5 27.5 33.0 26.0 20.0 30.0

10 30.0 26.0 21.5 27.5

VOLTAGE DC/AC

Capacitance 400 V DC / 200 V AC 630 V DC / 220 V AC

in µF Dimensions in Millimeters Dimensions in Millimeters

L H T S L H T S

0.01 13.0 10.0 5.5 10.0 13.0 10.5 6.0 10.0

0.015 13.0 10.0 6.0 10.0 13.0 11.0 6.5 10.0

0.022 13.0 10.0 6.0 10.0 13.0 11.0 6.5 10.0

0.033 13.0 11.0 6.5 10.0 18.0 10.0 6.5 15.0

0.047 13.0 11.5 7.0 10.0 18.0 11.0 7.0 15.0

0.068 13.0 12.5 7.0 10.0 18.0 12.0 8.0 15.0

0.1 18.0 11.0 6.0 15.0 18.0 15.0 8.5 15.0

0.15 18.0 14.0 8.0 15.0 18.0 15.5 11.0 15.0

0.22 18.0 16.5 9.5 15.0 24.0 16.5 10.5 20.0

0.33 18.0 16.5 10.0 15.0 24.0 18.0 12.0 20.0

0.47 24.0 17.5 10.5 20.0 30.0 22.0 12.5 27.5

0.68 30.0 18.0 10.5 27.5 30.0 23.5 14.0 27.5

1.0 30.0 21.5 12.0 27.5 30.0 25.5 15.0 27.5

1.5 30.0 24.0 14.0 27.5 33.0 28.0 20.0 30.0

2.2 33.0 26.0 18.0 30.0

3.3 33.0 28.0 21.0 30.0

Case Dimensions in Millimeters 100V • 250V • 400V • 630V

LIFE TEST DETAILS:

Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 °C for 1000 hours. After the test:

1. Capacitance change shall remain within ±5%.

2. Dissipation Factor shall be within 1.5 times the original limits.

3. Insulation Resistance shall be above 50% of the initial limits.

4. There shall be no remarkable change in the appearance and the marking shall remain legible.

VOLTAGE DC/AC

Capacitance 100 V DC / 63 V AC 250 V DC / 160 V AC

in µF Dimensions in Inches Dimensions in Inches

L H T S L H T S

0.01 0.512 0.394 0.217 0.394 0.512 0.394 0.217 0.394

0.015 0.512 0.394 0.236 0.394 0.512 0.394 0.236 0.394

0.022 0.512 0.394 0.236 0.394 0.512 0.394 0.236 0.394

0.033 0.512 0.394 0.236 0.394 0.512 0.394 0.236 0.394

0.047 0.512 0.394 0.236 0.394 0.512 0.394 0.236 0.394

0.068 0.512 0.433 0.256 0.394 0.512 0.433 0.256 0.394

0.1 0.512 0.492 0.276 0.394 0.512 0.492 0.276 0.394

0.15 0.512 0.492 0.315 0.394 0.512 0.492 0.315 0.394

0.22 0.512 0.492 0.315 0.394 0.709 0.512 0.276 0.591

0.33 0.531 0.551 0.354 0.394 0.709 0.551 0.315 0.591

0.47 0.531 0.591 0.394 0.394 0.709 0.630 0.374 0.591

0.68 0.709 0.531 0.315 0.591 0.945 0.551 0.374 0.787

1.0 0.709 0.650 0.374 0.591 0.945 0.709 0.413 0.787

1.5 0.709 0.748 0.453 0.591 0.945 0.906 0.531 0.787

2.2 0.945 0.827 0.492 0.787 1.181 0.906 0.531 1.083

3.3 0.945 0.866 0.512 0.787 1.181 0.945 0.650 1.083

4.7 1.181 0.925 0.551 1.083 1.299 0.945 0.709 1.181

6.8 1.181 0.945 0.610 1.083 1.299 1.024 0.787 1.181

10 1.181 1.024 0.846 1.083

VOLTAGE DC/AC

Capacitance 400 V DC / 200 V AC 630 V DC / 220 V AC

in µF Dimensions in Inches Dimensions in Inches

L H T S L H T S

0.01 0.512 0.394 0.217 0.394 0.512 0.413 0.236 0.394

0.015 0.512 0.394 0.236 0.394 0.512 0.433 0.256 0.394

0.022 0.512 0.394 0.236 0.394 0.512 0.433 0.256 0.394

0.033 0.512 0.433 0.256 0.394 0.709 0.394 0.256 0.591

0.047 0.512 0.453 0.276 0.394 0.709 0.433 0.276 0.591

0.068 0.512 0.492 0.276 0.394 0.709 0.472 0.315 0.591

0.1 0.709 0.433 0.236 0.591 0.709 0.591 0.335 0.591

0.15 0.709 0.551 0.315 0.591 0.709 0.610 0.433 0.591

0.22 0.709 0.650 0.374 0.591 0.945 0.650 0.413 0.787

0.33 0.709 0.650 0.394 0.591 0.945 0.709 0.472 0.787

0.47 0.945 0.689 0.413 0.787 1.181 0.866 0.492 1.083

0.68 1.181 0.709 0.413 1.083 1.181 0.925 0.551 1.083

1.0 1.181 0.846 0.472 1.083 1.181 1.004 0.591 1.083

1.5 1.181 0.945 0.551 1.083 1.299 1.102 0.787 1.181

2.2 1.299 1.024 0.709 1.181

3.3 1.299 1.102 0.827 1.181

Case Dimensions in Inches 100V • 250V • 400V • 630V

Sharma Film Capacitors

Features

- Very small size, Epoxy coating, Flame retardant to UL94V-0 7.5mm Lead spacing.

- Self-healing metallized polyester dielectric, Non-inductive construction.

- High performance and efficiencies. Custom values, voltages, and case sizes available upon request.

Application

- Multi-purpose

- Blocking & coupling

- By-passing & Filtering, Timing

Specifications

Capacitance Range 0.001µF to 1.0µF

Operating temperature -40 to +85°C (up to 100°C - derate voltage 1.25% per °C )

Rated Voltage 50/63, 100, 250, 400, 630, 1000V dc

Capacitance Tolerance ±2(G), ±5(J), ±10(K) %

Tangent of Loss Angle 0.008 or LESS (at 1KHz +25°C)

Insulation Resistance Voltage Charge : 1 min at +25°C, ±5°C

50 Vdc for Vr<100Vdc, 100Vdc for Vr≥100Vdc

9,000 or more, c≤0.33µf

5000S or more c>0.33µf

Voltage Test 1.6 x Vr applied for 2sec +25°C, 5°C (Between Terminal)

Endurance +85°C, ±2°C, 1.25 x Vr, 1000Hr

Cap Change: < ±5%, DF Change : <50x10 at 1khz

Insulation Resistance: <50% of limit value

Damp Heat +40°C±2°C, 93% ±2%, 21days

Cap Change: < ±5%, DF Change : <50x10 at 1khz

Insulation Resistance: <50% of limit value

Construction Non-inductive wound metallized polyester film

Epoxy dipped encasement, Flame retardant to UL94V-0

Lead Material Color of Body

Markings Solder coated or Tinned solid wire

Orange/Brown

Capacitance, Tolerance, Voltage

When space permits, Capacitor Type will be marked

-Special size or items on request.

- Tolerance Dimension ±0.5 mm.

Sharma Film Capacitors

Tel: (949) 642-7324 SECI Engineers & Buyers' Guide Fax: (949) 642- 7327

MKTD04 SERIES

Sharma Film Capacitors

Tel: (949) 642-7324 SECI Engineers & Buyers' Guide Fax: (949) 642- 7327

Capacitance

µF code

0.0010 102

0.0012 122

0.0015 152

0.0018 182

0.0022 222

0.0027 272

0.0033 332

0.0039 392

0.0047 472

0.0056 562

0.0068 682

0.0082 822

50/63DC

Tmax Hmax Wmax P d

3.0 5.0 9.3 7.5 0.6

100VDC

Tmax Hmax Wmax Pd

3.0 5.0 9.3 7.5 0.6

250VDC

Tmax Hmax Wmax Pd

3.0 5.0 9.3 7.5 0.6

0.010 103

0.012 123

0.015 153

0.018 183

0.022 223

0.027 273

0.033 333

0.039 393

0.047 473

0.056 563

0.068 683

0.082 823

0.10 104

0.12 124

0.15 154

0.18 184

0.22 224

0.27 274

0.33 334

0.39 394

0.47 474

0.56 564

0.68 684

0.82 824

1.0 105

3.0 5.0 9.3 7.5 0.6

3.0 5.2 9.3 7.5 0.6

3.0 5.5 9.3 7.5 0.6

3.0 6.0 9.3 7.5 0.6

3.3 6.5 9.3 7.5 0.6

3.5 6.5 9.3 7.5 0.6

4.0 7.0 9.3 7.5 0.6

4.0 7.5 9.3 7.5 0.6

4.5 7.8 9.3 7.5 0.6

4.8 8.0 9.3 7.5 0.6

5.0 9.0 9.3 7.5 0.6

5.2 9.2 9.3 7.5 0.6

5.8 10.8 9.3 7.5 0.6

3.0 5.0 9.3 7.5 0.6

3.0 5.2 9.3 7.5 0.6

3.0 5.5 9.3 7.5 0.6

3.0 6.0 9.3 7.5 0.6

3.3 6.5 9.3 7.5 0.6

3.5 6.5 9.3 7.5 0.6

4.0 7.0 9.3 7.5 0.6

4.0 7.5 9.3 7.5 0.6

4.5 7.8 9.3 7.5 0.6

4.8 8.0 9.3 7.5 0.6

5.0 9.0 9.3 7.5 0.6

5.2 9.2 9.3 7.5 0.6

5.8 10.8 9.3 7.5 0.6

3.0 5.0 9.3 7.5 0.6

3.0 5.2 9.3 7.5 0.6

---- -

-----

-- - --

-----

-- - --

-----

Sharma Film Capacitors

Tel: (949) 642-7324 SECI Engineers & Buyers' Guide Fax: (949) 642- 7327

Ca

p

acitance

µ

Fcode

0.0010 102

0.0012 122

0.0015 152

0.0018 182

0.0022 222

0.0027 272

0.0033 332

0.0039 392

0.0047 472

0.0056 562

0.0068 682

0.0082 822

0.010 103

0.012 123

0.015 153

0.018 183

0.022 223

400V DC

Tmax Hmax Wmax P

d

3.0 5.0 9.3 7.5 0.6

-- - 7.5 0.6

- - - - -

-----

-- - - -

630V DC

Tmax Hmax Wmax P

d

3.0 5.0 9.3 7.5 0.6

-- - - -

--- - -

-- - - -

--- - -

-- - - -

--- - -

-- - - -

--- - -

-----

1000V DC

Tmax Hmax Wmax P

d

3.0 5.0 9.3 7.5 0.6

-- - - -

- - - - -

-- - - -

- - - - -

-- - - -

- - - - -

-- - - -

- - - - -

-- - - -

- - - - -

--- - -

---- -

- - - - -

-----

0.027 273

0.033 333

0.039 393

0.047 473

0.056 563

0.068 683

0.082 823

0.10 104

0.12 124

0.15 154

0.18 184

0.22 224

0.27 274

0.33 334

0.39 394

0.47 474

0.56 564

0.68 684

0.82 824

1.0 105

- - - - -

Description Symbol Dimensions (mm)

Lead Spacing 7.5mm Toll

Lead wire diameter Фd 0.6 ±0.05

Taping pitch P 12.7 ±0.1

Sprocket hole pitch P0 12.7 ±0.2

Centering of the lead wire P 3.75 ±0.5

Centering of the body P2 0 -

Lead spacing F 7.5 ±0.8

Component alignment ∆h 0 ±2.0

Height from sprocket hole H1 20.0 ±0.5

Height H 16.0 ±0.5

Center to the comp body L 11.0 ±0.5

Tape width W 18.0 +1.0-0.5

Width of adhesive tape W0 13.0 ±0.5

Sprocket hole alignment W1 9.0 ±0.5

Position of adhesive tape W2 3max

Sprocket hole diameter D0 4.0 ±0.2

Tape thickness T 0.7

±0.2

Standard Packing Quantity For Box

Sharma Film Capacitors

Tel: (949) 642-7324 SECI Engineers & Buyers' Guide Fax: (949) 642- 7327

Taping Specifications For Automatic Insertion

Sharma Film Capacitors

Tel: (949) 642-7324 SECI Engineers & Buyers' Guide Fax: (949) 642- 7327

50-100V 250V 400V 630V 1000V

102-124

values 1800PCS 102-273

values 2000PCS 102-822

values 2000PCS 102-392

values 2000PCS 102-182

values 2000PCS

154-224

values 1500PCS 333-524

values 1500PCS 103-223

values 1500PCS 472-822

values 1500PCS 222-332

values 1500PCS

274-474

values 1200PCS 154-184

values 1200PCS 273-393

values 1200PCS 103-123

values 1200PCS 392-822

values 1200PCS

564-824

values 1000PCS 224-274

values 1000PCS 473-563

values 1000PCS 153-223

values 1000PCS 103

value 1000PCS

- - 334-474

values 800PCS 683-823

values 800PCS 273-333

values 800PCS - -

- - 564-684

values 700PCS 104

value 700PCS 393

value 700PCS - -

Features

- Very small size, Epoxy coating, Flame retardant to UL94V-0 5mm Lead spacing.

- Self-healing metallized polyester dielectric, Non-inductive construction.

- High performance and efficiencies. Custom values, voltages, and case sizes available upon request.

Application

- Multi-purpose

- Blocking & coupling

- By-passing & Filtering, Timing

Specifications

Capacitance Range 0.001µF to 1.0µF

Operating Temperature -40 to +85°C (up to 100°C - derate voltage 1.25% per °C )

Rated Voltage 50/63, 100, 250, 400, 630V DC

Capacitance Tolerance ±2(G), ±5(J), ±10(K) %

Tangent of Loss Angle 0.008 or LESS (at 1KHz +25°C)

Insulation Resistance Voltage Charge : 1 min at +25°C, ±5°C

50 Vdc for Vr<100Vdc, 100Vdc for Vr≥100Vdc

9,000 or more, c≤0.33µf

5000S or more c>0.33µf

Voltage Test 1.6 x Vr applied for 2sec +25°C, 5°C (Between Terminal)

Endurance +85°C, ±2°C, 1.25 x Vr, 1000Hr

Cap Change: < ±5%, DF Change : <50x10 at 1khz

Insulation Resistance: <50% of limit value

Damp Heat +40°C±2°C, 93% ±2%, 21days

Cap Change: < ±5%, DF Change : <50x10 at 1khz

Insulation Resistance: <50% of limit value

Construction Non-inductive wound metallized polyester film

Epoxy dipped encasement, Flame retardant to UL94V-0

Lead Material Color of Body

Markings Solder coated or Tinned solid wire

Orange/Brown

Capacitance, Tolerance, Voltage

When space permits, Capacitor Type will be marked

-Special size or items on request.

- Tolerance Dimension ±0.5 mm.

Sharma Film Capacitors

Tel: (949) 642-7324 SECI Engineers & Buyers' Guide Fax: (949) 642- 7327

MKTD05 SERIES

Capacitance

µF code

0.001 102

0.0012 122

0.0015 152

0.0018 182

0.0022 222

0.0027 272

0.0033 332

0.0039 392

0.0047 472

0.0056 562

0.0068 682

0.0082 822

0.010 103

0.012 123

0.015 153

0.018 183

0.022 223

0.027 273

0.033 333

0.039 393

0.047 473

0.056 563

0.068 683

0.082 823

0.10 104

0.12 124

0.15 154

0.18 184

0.22 224

0.27 274

0.33 334

0.39 394

0.47 474

0.56 564

0.68 684

0.82 824

1.0 105

50/63VDC

Tmax Hmax Wmax P d

3.2 5.0 5.0 0.5

3.2 5.0 6.8 5.0 0.5

3.2 5.3 6.8 5.0 0.5

3.2 5.5 6.8 5.0 0.5

3.5 6.5 6.8 5.0 0.5

4.0 7.0 6.8 5.0 0.5

4.3 8.0 6.8 5.0 0.5

4.8 8.0 6.8 5.0 0.5

5.0 9.0 6.8 5.0 0.5

5.5 9.5 6.8 5.0 0.5

5.8 9.5 6.8 5.0 0.5

6.3 10.5 6.8 5.0 0.5

100VDC

Tmax Hmax Wmax P d

3.2 5.0 6.8 5.0 0.5

3.2 5.3 6.8 5.0 0.5

3.2 5.5 6.8 5.0 0.5

3.5 6.5 6.8 5.0 0.5

4.0 7.0 6.8 5.0 0.5

4.3 8.0 6.8 5.0 0.5

4.8 8.0 6.8 5.0 0.5

5.0 9.0 6.8 5.0 0.5

5.5 9.5 6.8 5.0 0.5

5.8 9.5 6.8 5.0 0.5

6.3 10.5 6.8 5.0 0.5

Sharma Film Capacitors

Tel: (949) 642-7324 SECI Engineers & Buyers' Guide Fax: (949) 642- 7327

0.0027 272

0.0033 332

0.0039 392

0.0047 472

0.0056 562

0.0068 682

0.0082 822

0.010 103

0.012 123

0.015 153

0.018 183

0.022 223

0.027 273

0.033 333

0.039 393

0.047 473

0.056 563

0.068 683

0.082 823

0.10 104

0.12 124

0.15 154

0.18 184

0.22 224

0.27 274

0.33 334

0.39 394

0.47 474

0.56 564

0.68 684

0.82 824

1.0 105

3.2 5.0 6.8 5.0 0.5

-----

-- - - -

--- - -

-- - - -

-----

- - - - -

-- - --

---- -

--- - -

-----

- - ---

- - - --

---- -

- - - --

-- - - -

- - - - -

3.2 5.0 6.8 5.0 0.5

-----

---- -

--- - -

-- - - -

-----

--- - -

-- - - -

-----

-- - - -

--- - -

-----

--- - -

-- - - -

-- - --

-- - - -

--- - -

-----

-- - - -

---- -

--- - -

- - - - -

-----

- - ---

- - - - -

-- - - -

- - - - -

-- - - -

- - ---

-- - --

- - - - -

-- - - -

--- - -

- - - - -

- - ---

--- - -

- - - - -

---- -

- - - --

- - ---

-- - - -

--- - -

-- - --

--- - -

Sharma Film Capacitors

Tel: (949) 642-7324 SECI Engineers & Buyers' Guide Fax: (949) 642- 7327

Capacitance

µF code

0.0010 102

0.0012 122

0.0015 152

0.0018 182

0.0022 222

250VDC

Tmax Hmax Wmax P d

3.2 5.0 6.8 5.0 0.5

400VDC

Tmax Hmax Wmax Pd

3.2 5.0 6.8 5.0 0.5

630VDC

Tmax Hmax Wmax Pd

3.2 5.0 6.8 5.0 0.5

Standard Packing Quantity For Box

Centering of the lead wire P1 3.85 ±0.5

Centering of the body P2 6.35 ±1.3

Lead spacing F 5.0 ±0.8

Component alignment ∆h 0 ±2.0

Height from sprocket holeH1 20.0 ±0.5

Height H0 16.0 ±0.5

Center to the comp body L 11.0 ±0.5

Tape width W 18.0 +1.0-0.5

Width of adhesive tape W0 13.0 ±0.5

Sprocket hole alignment W1 9.0 ±0.5

Position of adhesive tape W2 3max

Sprocket hole diameter D0 4.0 ±0.2

Tape thickness T 0.7 ±0.2

50-100V 250V 400V

102-104 values 2000PCS 102-183 values 2000PCS 102-822 values 2000PCS

124-182 values 1500PCS 223-333 values 1500PCS 103-153 values 1500PCS

224-474 values 1200PCS 393-473 values 1200PCS 183-273 values 1200PCS

564-824 values 1000PCS 563-823 values 1000PCS 333-393 values 1000PCS

105-125 values 800PCS 104-224 values 800PCS 474-563 values 800PCS

Sharma Film Capacitors

Tel: (949) 642-7324 SECI Engineers & Buyers' Guide Fax: (949) 642- 7327

Description Symbol Dimensions (mm)

Lead Spacing 5mm Toll

Lead wire diameter Фd 0.3 ±0.05

Taping pitch P 12.7 ±0.1

Sprocket hole pitch P0 12.7 ±0.2

Taping Specifications For Automatic Insertion

MKTD06 SERIES

Features

- Metallized polyester film, epoxy resin coating

- Large C-values in small dimensions

- Excellent self-healing properly and high reliability

Specifications

Operating Temperature -40+85°C

Rated Voltage DC 250V, 400V, 630V

Capacitance Range 0.01 to 6.8 Mfd

Capacitance Tolerance ±5%, ±10%

Dissipation Factor<0.01 (At 1KHz)

Insulation Resistance Cr≤0.33µF:≥7,500Mohm, Ur >100V

Cr>0.33µF: >25,000Mohm·µF, Ur >100V

Voltage Test 1.4 Ur (Is)

-Special size or items on request.

- Tolerance Dimension ±1.0 mm.

VDC

Mfd

0.01

0.015

0.018

0.022

0.027

0.033

0.039

0.047

0.056

0.068

0.082

0.10

250VDC

W T H P

12 6 8.5 10

12 6 9.5 10

400VDC

W T H P

11.5 5 8 10.5

12 5 9 10.5

12.5 5 9 10.5

12.5 6 10.5 10.5

630VDC

W T H P

12 5 8.5 10

13 6 9.5 10.5

13 6 10 15.5

17.5 6 10 15.5

17.5 6 10.5 15.5

17.5 6 11 15.5

Sharma Film Capacitors

Tel: (949) 642-7324 SECI Engineers & Buyers' Guide Fax: (949) 642- 7327

*All sizes for reference only *

0.15

0.18

0.22

0.27

0.33

0.39

0.47

0.50

0.56

0.68

0.82

1.0

1.2

1.5

1.8

2.2

2.5

2.7

6.8

13 6.5 10.5 10.5

13 7 10.5 10.5

17 7 10.5 15

17 7 11.5 15

18 7 11.5 15

18 7 13.5 15

18 7.5 13.5 15

23 7.5 13.5 20

23 8 14.5 20

24 8 14.5 20

28 8.5 16 25

28 8.5 18 25

28 9 18 25

32 10 18 30

17.5 6.5 9.5 15.5

17.5 5.5 9.5 15.5

19 7.5 12.5 16.0

19 7.5 9.5 20.5

19 7.5 15.5 16.0

22.5 5.5 11.5 20.5

23.5 6 11.5 20.5

23.5 8 12 25.5

23.5 8.5 18.5 20

28 8.5 18 20

28 9.5 18 25.5

30 10 19 28

30 10.5 19.5 28

17.5 8 13 15.5

23 8.5 14.5 20.5

23 9 15 20.5

23 9 15 25.5

28.5 9.5 18 25.5

28.5 10.5 19 25.5

28.5 13.5 22 25.5

30.5 13.5 22 28.5

Sharma Film Capacitors

Tel: (949) 642-7324 SECI Engineers & Buyers' Guide Fax: (949) 642- 7327

Rated Capacitance dv/dt

Voltage Range µF Value

50 0.001-1.0 4

63 0.001-1.0 8

100 >0.0068 10

100 0.0033-0.0068 15

100 >0.0033 30

250 0.001-1.0 20

400 0.001-1.0 40

CASE Dimensions Millimeters (Inches)

SIZE W H L a b

G 5.2(0.205) 3.2(0.126) 7.2(0.283) 1.0(0.039) 3.0(0.118)

H 8.2(0.323) 4.5(0.177) 10.0(0.394) 1.5(0.059) 4.0(0.157)

J 8.2(0.323) 5.0(0.197) 12.5(0.492) 2.0(0.079) 4.0(0.157)

TOLRANCE ON DIMENSIONS: ±0.2mm (.008")

VOLTAGE V DC (Voltage Code)

Capacitance 63 100 250 400 630

in µF (1J) (2A) (2E) (2G) (2J)

0.01 G H

0.015 G H

0.022 G H J

0.033 G H J

0.047 G H J

0.068 G H J

0.1 G H J

0.15 H J

0.22 H J

CASE SIZE TABLE

PULSERISE TIME (dv/dt) -

Volts per µSecond.

CASE DIMENSIONS TABLE

Ordering Information

(EXAMPLE) M K T 0 0 S 2 G 4 7 3 K S

Series

Series Code: MKT 00S

Voltage Code

Voltage Code 1J 2A 2E 2G 2J

DC Voltage 63V 100V250V 400V630V

Capacitance

First Two Digits Represent Significant Figures of Capacitance in Picofarads.

Third Digit Indicates Number of Zeros

Tolerance

Capacitance Tolerance Code:

Capacitance Tolerance ± 20% ± 10% ±5%

Code M K J

Packing Method Code

Packing Code O T S

Method BulkTapeStick

Case Sizes G,H,J G H, J

Example at right indicates:

MKT 00S Series, 400 V DC, 0.047 µF,

10%, Stick Magazine packing

INTRODUCTION

The MKT00S Series Metallized Polyester Film Capacitors are miniature capacitors

specially developed for Surface Mount Technology. This series covers a wide range

of values and voltages in three convenient case sizes and have excellent electrical

characteristics. The MKT00S series has fire retardant epoxy molded encapsulation

which also provide high insulation resistance.

FEATURES

•Ultra miniature size

•Wide value and voltage range in just three case sizes

•Flame retardant epoxy encapsulation

•Consistent dimensions and surface finish due to molded construction

•Compatible with all popular high speed assembly machines

•Available in Carrier Tape, Stick and Bulk packing

•Self healing capability

•Compatible with all standard standard SMT soldering methods

GENERAL SPECIFICATIONS:

Dissipation factor:0.0070 max at 1 K Hz

Insulation resistance:>15,000 M Ohms at a temperature of 25 ±5 °C, when

measured at: 10 ±1 V DC for 63V DC rated capacitors, 100 ±15 V DC for 100 to

400V DC rating and, 500 ±50 V DC for 630V DC rating.

Capacitance tolerance:±10%(K). ±5%(J) available on request

Voltage Test :1.5 times the rated voltage applied between terminals for 2 sec-

onds.at a temperature of 25 ±5 °C Temperature range:-40 to 105 °C with

derating above 85 °C. Climatic category:F M E

LIFE TEST DETAILS:

Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage

applied at 85 °C for 1000 hours. After the test:

1. Capacitance change shall remain within ±5%.

2. Dissipation Factor shall be within 1.5 times the original limits.

3. Insulation Resistance shall be above 50% of the initial limits.

4. There shall be no remarkable change in the appearance and the marking

shall remain legible.

DIMENSIONS

AND

TOLERANCES:

"d" - 0.5 - 0.6 mm

(0.020" - 0.024")

for dimension "T"

< 3.5mm (0.138")

"d" - 0.6 mm

(0.024")

for dimension

"T" > 3.5mm

(0.138")

"LL'' - 4.0 +1.5mm

(0.16 + 0.06")

for bulk supply

MKT 00SSERIES

FFoorrmmeerrllyy SSMMXX sseerriieess

Sharma Film Capacitors

MKT 00S

Packaging Specification

DIMENSION A B C

DIMENSION 40 40 550 to

in MILLIMETERS min min 1200

DIMENSION 1.575 1.575 21.65 to

in INCHES min min 47.24

CASE QUANTITY PER PACK

SIZE TAPE STICK BULK

G 500 NA 100

H NA 60 100

J NA 50 100

DIMENSION A a B b

DIMENSION 10.5 9.1 9.5 6.3

in MILLIMETERS ±0.2 ±0.2 ±0.2 ±0.2

DIMENSION 0.413 0.358 0.374 0.248

in INCHES ±0.008 ±0.008 ±0.008 ±0.008

DIMENSION C D L

DIMENSION 5 2.5 670

in MILLIMETERS ±0.2 ±0.2 ±2.0

DIMENSION 0.197 0.098 26.378

in INCHES ±0.008 ±0.008 ±0.080

DIMENSION A B W F E P1

DIMENSION 5.6 7.6 12 5.5 1.75 8

in MILLIMETERS ±0.3 ±0.3 ±0.3 ±0.05 ±0.1 ±0.1

DIMENSION 0.220 0.299 0.472 0.217 0.069 0.315

in INCHES ±0.012 ±0.012 ±0.012 ±0.002 ±0.004 ±0.004

DIMENSION P2 P0 D0 T T2

DIMENSION 2 4 1.5 0.3 4.2

in MILLIMETERS ±0.05 ±0.1 ±0.1 ±0.1 ±0.2

DIMENSION 0.079 0.157 0.059 0.012 0.165

in INCHES ±0.002 ±0.004 ±0.004 ±0.004 ±0.008

PEEL-OFF

TAPE DIMENSIONS

STICK MAGAZINE DIMENSIONS

STANDARD PACKING QUANTITY

LEADER SPECIFICATIONS

REEL DIMENSIONS (500 pcs/Reel)

A B C D E W t

ø178 ±2.0 ø50 min. 13.0 ±0.5 21.0 ±0.8 2.0 ±0.8 8.8/12.8 ±1.5 2.0 ±0.5

ø330 ±2.0 ø100 min. 13.0 ±0.5 21.0 ±0.8 2.0 ±0.8 8.8/12.8 ±1.5 2.0 ±0.6

A B C D E W t

ø7 ±0.08 ø2.0 min. 5.0 ±0.02 0.83 ±0.03 0.08 ±0.3 0.35/0.50 ±0.06 0.08 ±0.02

ø13 ±0.08 ø4.0 min. 5.0 ±0.3 0.83 ±0.03 0.08 ±0.3 0.35/0.50 ±0.06 0.08 ±0.02

Dimensions in Millimeters

Dimensions in Inches

Sharma Film Capacitors

INTRODUCTION

The MKTR Series Round Axial Metallized Polyester Film Capacitors

cover a wide range of values and voltages. These capacitors also

have good high frequency characteristics and are suitable for

applications such as Blocking, By-passing, Coupling and all General

Purpose applications.

FEATURES

•Wide value and Voltage range

•Tape wrapped axial construction for different typed of mounting

•Reduced dimensions due to taped wrapped encapsulation

•Self healing capability

•Available in tape and reel form for automatic insertion

(please check with us about availability of specific values)

•Close tolerance ±1% and ±2% available on request

GENERAL SPECIFICATIONS

Dissipation factor:≤0.0100 at 1 K Hz

Insulation resistance:For 100 VDC

rated parts; ≥9,000 M Ohms for

C≤0.33 µF,

≥3,000 seconds for C> 0.33 µF

at a temperature of 25 ±5 °C.

For 250 to 630 VDC rated parts;

≥15,000 M Ohms for C≤0.33 µF,

≥5,000 seconds for C> 0.33 µF

at a temperature of 25 ±5 °C.

Capacitance tolerance:±5%(J), ±10%(K) and

±20%(M).

Voltage Test :1.6 times the rated voltage

applied between terminals for 2 seconds.

at a temperature of 25 ±5 °C.

Temperature range:-40 to 85 °C with

derating above 85 °C.

Climatic category:G P D

LIFE TEST DETAILS:

Capacitors shall withstand 125% DC rated

voltage or 100% AC rated voltage applied at

85 °C for 1000 hours. After the test:;

1. Capacitance change shall remain

within ±5%.

2. Dissipation Factor shall be within

1.5 times the original limits

3. Insulation Resistance shall be above

30% of the initial limits.

4. There shall be no remarkable change in

the appearance and the marking shall

remain legible.

DIMENSIONS AND TOLERANCES

"d" = 0.6 mm (0.024") For D≤6.0 mm

"d" = 0.8 mm (0.032") For D>6.0 mm

RATED dv / dt rating

VOLTAGE in volts / µ seconds

100 1

160 2

250 3

400 5

630 7

1000 10

PULSE RISE TIME (dv/dt) Volts per µsec.

MKTRSERIES

FFoorrmmeerrllyy MMPPRR sseerriieess

VOLTAGE DC 100 160 250 400 630

VOLTAGE AC 63 90 160 200 220

Dimensions Dimensions Dimensions Dimensions Dimensions

Capacitance in MM in MM in MM in MM in MM

in uF D L D L D L D L D L

0.01 5 10.5 5 10.5 5 10.5 5 10.5 6 14

0.015 5 10.5 5 10.5 5 10.5 5.5 14 6.5 14

0.022 5 10.5 5 10.5 5 10.5 5.5 14 7 14

0.033 5 10.5 5 10.5 5 10.5 6 14 7 19

0.047 5.5 10.5 5.5 10.5 5.5 14 7 14 7.5 19

0.068 5.5 10.5 5.5 10.5 5.5 14 7 19 8.5 19

0.1 5.5 10.5 6 10.5 6 14 7.5 19 9 27

0.15 5.5 14 6 14 7 19 8.5 19 10.5 27

0.22 5.5 14 6.5 14 7 19 8.5 27 11.5 27

0.33 5.5 14 7.5 14 8 19 10 27 11.5 32

0.47 6.5 14 7.5 19 9.5 27 12.5 27 14 32

0.68 6.5 19 8 19 9.5 27 12.5 32 16.5 32

1.0 7.5 19 9.5 19 10.5 27 14.5 32 20 32

1.5 9.5 19 9.5 27 12.5 27 17.5 32 19 47

2.2 9.5 27 11 27 14 32 20.5 32 23 47

3.3 11 27 13 27 16 32 20.5 47 28 47

4.7 12.5 27 14 32 18.5 32 23 47

6.8 14 32 17 32 21.5 47 27 47

VOLTAGE DC 100 160 250 400 630

VOLTAGE AC 63 90 160 200 220

Dimensions Dimensions Dimensions Dimensions Dimensions

Capacitance in Inches in Inches in Inches in Inches in Inches

in uF D L D L D L D L D L

0.01 0.197 0.413 0.197 0.413 0.197 0.413 0.197 0.413 0.236 0.551

0.015 0.197 0.413 0.197 0.413 0.197 0.413 0.217 0.551 0.256 0.551

0.022 0.197 0.413 0.197 0.413 0.197 0.413 0.217 0.551 0.276 0.551

0.033 0.197 0.413 0.197 0.413 0.197 0.413 0.236 0.551 0.276 0.748

0.047 0.217 0.413 0.217 0.413 0.217 0.551 0.276 0.551 0.295 0.748

0.068 0.217 0.413 0.217 0.413 0.217 0.551 0.276 0.748 0.335 0.748

0.1 0.217 0.413 0.236 0.413 0.236 0.551 0.295 0.748 0.354 1.063

0.15 0.217 0.551 0.236 0.551 0.276 0.748 0.335 0.748 0.413 1.063

0.22 0.217 0.551 0.256 0.551 0.276 0.748 0.335 1.063 0.453 1.063

0.33 0.217 0.551 0.295 0.551 0.315 0.748 0.394 1.063 0.453 1.260

0.47 0.256 0.551 0.295 0.748 0.374 1.063 0.492 1.063 0.551 1.260

0.68 0.256 0.748 0.315 0.748 0.374 1.063 0.492 1.260 0.650 1.260

1.0 0.295 0.748 0.374 0.748 0.413 1.063 0.571 1.260 0.787 1.260

1.5 0.374 0.748 0.374 1.063 0.492 1.063 0.689 1.260 0.748 1.850

2.2 0.374 1.063 0.433 1.063 0.551 1.260 0.807 1.260 0.906 1.850

3.3 0.433 1.063 0.512 1.063 0.630 1.260 0.807 1.850 1.102 1.850

4.7 0.492 1.063 0.551 1.260 0.728 1.260 0.906 1.850

6.8 0.551 1.260 0.669 1.260 0.846 1.850 1.063 1.850

Case Dimensions in Millimeters: 100V • 160V • 250V • 400V • 630V

Case Dimensions in Inches: 100V • 160V • 250V • 400V • 630V

D max.

d

L max.1.4" max 1.4" max

Sharma Film Capacitors

VOLTAGE (DC) 100 V DC 250 V DC 400 V DC 630 V DC

VOLTAGE (AC) 63 V AC 160 V AC 200 V AC 220 V AC

Dimensions Dimensions Dimensions Dimensions

Capacitance in Millimeters in Millimeters in Millimeters in Millimeters

in µF L H T L H T L H T L H T

0.01 14.0 7.0 4.5

0.015 14.0 7.5 5.0

0.022 14.0 8.0 6.0

0.033 19.0 10.0 5.0

0.047 19.0 10.0 5.0

0.068 19.0 11.0 6.0

0.1 14.0 8.0 4.5 14.0 8.0 4.5 19.0 10.0 5.0 27.0 10.5 6.0

0.15 14.0 8.0 4.5 14.0 9.0 5.0 19.0 11.0 6.5 27.0 13.0 7.5

0.22 14.0 8.5 5.0 19.0 9.0 5.0 19.0 13.0 8.0 27.0 14.5 8.5

0.33 19.0 8.0 4.5 19.0 10.5 5.5 27.0 13.0 7.0 32.0 15.0 9.5

0.47 19.0 9.0 5.0 19.0 12.0 7.0 27.0 14.0 8.0 32.0 17.0 12.0

0.68 19.0 10.5 5.5 27.0 12.0 6.0 32.0 16.0 9.0 32.0 20.0 15.0

1 19.0 12.0 6.0 27.0 13.0 7.0 32.0 18.5 10.5 32.0 26.0 17.0

1.5 19.0 14.0 8.5 32.0 15.0 8.5 32.0 22.0 12.0 47.0 23.5 16.5

2.2 27.0 14.0 7.0 32.0 16.5 10.0 32.0 24.0 16.0 47.0 25.5 17.5

3.3 27.0 17.0 9.5 32.0 20.5 12.0 47.0 23.5 15.0 47.0 34.0 21.0

4.7 32.0 18.0 10.0 32.0 25.0 14.0 47.0 27.0 18.0

6.8 32.0 21.0 11.0 47.0 23.0 14.0 47.0 34.0 22.0

VOLTAGE (DC) 100 V DC 250 V DC 400 V DC 630 V DC

VOLTAGE (AC) 63 V AC 160 V AC 200 V AC 220 V AC

Dimensions Dimensions Dimensions Dimensions

Capacitance in Inches in Inches in Inches in Inches

in µF L H T L H T L H T L H T

0.01 0.551 0.276 0.177

0.015 0.551 0.295 0.197

0.022 0.551 0.315 0.236

0.033 0.748 0.394 0.197

0.047 0.748 0.394 0.197

0.068 0.748 0.433 0.236

0.1 0.551 0.315 0.177 0.551 0.315 0.177 0.748 0.394 0.197 1.063 0.413 0.236

0.15 0.551 0.315 0.177 0.551 0.354 0.197 0.748 0.433 0.256 1.063 0.512 0.295

0.22 0.551 0.335 0.197 0.748 0.354 0.197 0.748 0.512 0.315 1.063 0.571 0.335

0.33 0.748 0.315 0.177 0.748 0.413 0.217 1.063 0.512 0.276 1.260 0.591 0.374

0.47 0.748 0.354 0.197 0.748 0.472 0.276 1.063 0.551 0.315 1.260 0.669 0.472

0.68 0.748 0.413 0.217 1.063 0.472 0.236 1.260 0.630 0.354 1.260 0.787 0.591

1 0.748 0.472 0.236 1.063 0.512 0.276 1.260 0.728 0.413 1.260 1.024 0.669

1.5 0.748 0.551 0.335 1.260 0.591 0.335 1.260 0.866 0.472 1.850 0.925 0.650

2.2 1.063 0.551 0.276 1.260 0.650 0.394 1.260 0.945 0.630 1.850 1.004 0.689

3.3 1.063 0.669 0.374 1.260 0.807 0.472 1.850 0.925 0.591 1.850 1.339 0.827

4.7 1.260 0.709 0.394 1.260 0.984 0.551 1.850 1.063 0.709

6.8 1.260 0.827 0.433 1.850 0.906 0.551 1.850 1.339 0.866

Case Dimensions in Millimeters: 100V • 250V • 400V • 630V

Case Dimensions in Inches: 100V • 250V • 400V • 630V

INTRODUCTION

The MKTO Series Flat Axial Metallized Polyester Film Capacitors cover a wide

range of values and voltages. These capacitors also have good high frequency

characteristics and are suitable for; Blocking, By-passing, Coupling and all

General Purpose applications. This series is specifically designed for mounting

in locations where height is critical or where different mounting options are

required.

FEATURES:

•Wide value and Voltage range

•Flat axial construction for different types of mounting

•Reduced dimensions due to tape wrapped encapsulation

•Self healing capability

GENERAL SPECIFICATIONS

Dissipation factor:≤0.0100 at 1 K Hz. Insulation resistance:For 100 VDC

rated parts;≥9,000 M Ohms for C≤0.33 µF, ≥3,000 seconds for C> 0.33 µF

DIMENSIONS AND TOLERANCES

"d" - 0.8 mm (0.032")

RATED dv / dt rating

VOLTAGE in volts / µ seconds

100 1

160 2

250 3

400 5

630 7

1000 10

PULSE RISE TIME (dv/dt) Volts per µsec.

(1.4“ min.)

MKTOSERIES

FFoorrmmeerrllyy MMPPOO sseerriieess

(1.4“ min.)

at a temperature of

25 ±5 °C. For 250 to 630

VDC rated parts;

≥15,000 M Ohms for C≤

0.33 µF ≥5,000 seconds for

C> 0.33 µF at a temperature

of 25 ±5 °C. Capacitance

tolerance:±5%(J), ±10%(K)

and ±20%(M) Voltage Test:

1.6 times the rated voltage

applied between terminals

for 2 seconds. at a tempera-

ture of 25 ±5 °C

Temperature range:-40 to

85 °C with derating above

85 °C.

Climatic category:G P D

LIFE TEST DETAILS:

Capacitors shall withstand

125% DC rated voltage or

100% AC rated voltage

applied at 85 °C for 1000

hours. After the test:;

1. Capacitance change shall

remain within ±5%.

2. Dissipation Factor shall be

within 1.5 times the

original limits

3.Insulation Resistance shall

be above 50% of the

initial limits.

4. There shall be no

remarkable change in the

appearance and the

marking shall remain

legible.

Sharma Film Capacitors

INTRODUCTION:

The MKTFS Series Metallized Polyester Film Capacitors cover a wide range of

values and voltages. This series provides alternative dimensions for the same

values covered by the other MKTD series. These capacitors are suitable for

applications such as Blocking, By-passing and Coupling and are widely used in

General communication equipment.

FEATURES:

•Wide value and Voltage range

•Self healing capability

•Flame retardant powder epoxy encapsulation

•Minimum overall dimensions due to dip coated construction

GENERAL SPECIFICATIONS:

Dissipation factor:< 0.0100 at 1 K Hz for capacitance≤1.0 µF, < 0.0150 at 1 K

Hz for capacitance> 1.0 µF. Insulation resistance:For 100 VDC rated parts;

≥9,000 M Ohms for C≤0.33 µF, ≥3,000 seconds for C> 0.33 µF at a

temperature of 25 ±5 °C. For 250 to 630 VDC rated parts; ≥15,000 M Ohms for

C≤0.33 µF, ≥5,000 seconds for C> 0.33 µF at a temperature of 25 ±5 °C

Capacitance tolerance:±5%(J) and ±10%(K). Voltage Test :1.75 times the

rated voltage applied between terminals for 5 seconds. at a temperature of

25 ±5 °C. Temperature range:-40 to 85 °C.

LEAD SPACING mm (inches)

Rated 10.0 15.0 22.5 27.0

Voltage (0.40) (0.60) (0.89) (1.06)

100 6 3 2 1

250 11 7 4 3

400 20 10 5.5 5

630 30 15 8 7

DIMENSIONS AND

TOLERANCES:

d - 0.7 mm

z - 3 mm max.

LL - 20.0 mm min.

Tolerance on P ±1.5 mm

PULSE RISE TIME (dv/dt) Volts per µsec.

MKT FSSERIES

VOLTAGE DC/AC

Capacitance 100 V DC / 63 V AC 250 V DC / 160 V AC

in µF Dimensions in Millimeters Dimensions in Millimeters

L H T P L H T P

0.01 13.0 9.5 5.0 11.5 13.0 9.5 5.0 11.5

0.015 13.0 9.5 5.0 11.5 13.0 9.5 5.0 11.5

0.022 13.0 9.5 5.0 11.5 13.0 9.5 5.0 11.5

0.033 13.0 9.5 5.0 11.5 13.0 9.5 5.0 11.5

0.047 13.0 10.0 5.5 11.5 13.0 10.0 5.5 11.5

0.056 13.0 10.0 5.5 11.5 13.0 10.0 5.5 11.5

0.068 13.0 10.0 5.0 11.5 13.0 10.0 5.0 11.5

0.082 13.0 10.0 5.5 11.5 13.0 10.0 5.5 11.5

0.1 13.0 9.5 5.0 11.5 13.0 9.5 5.0 11.5

0.15 13.0 1.5 5.5 11.5 13.0 10.5 5.5 11.5

0.22 13.0 11.0 5.5 11.5 13.0 11.0 6.0 11.5

0.33 13.0 11.0 6.0 11.5 13.0 11.5 6.0 11.5

0.47 13.0 11.0 6.0 11.5 18.5 12.5 6.0 15.0

0.56 18.5 11.0 5.5 16.0 18.5 13.0 6.5 15.5

0.68 18.5 12.0 6.0 16.0 18.5 13.5 7.0 15.5

1.0 18.5 13.5 7.5 16.0 24.0 13.0 6.0 21.0

1.5 18.5 15.5 8.5 16.0 24.0 16.5 8.5 21.5

2.2 24.0 16.0 9.0 21.5 30.0 17.0 9.0 27.0

3.3 30.0 19.0 12.0 21.5 30.0 21.0 12.0 27.5

4.7 30.0 20.0 12.0 26.5 30.0 24.0 15.0 27.5

10 37.0 25.0 18.0 32.5

Case Dimensions in Millimeters 100V • 250V

LIFE TEST DETAILS:

Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 °C for 1000 hours. After the test:

1. Capacitance change shall remain within ±5%.

2. Dissipation Factor shall be within 1.5 times the original limits.

3. Insulation Resistance shall be above 50% of the initial limits.

4. There shall be no remarkable change in the appearance and the marking shall remain legible.

VOLTAGE DC/AC

Capacitance 400 V DC / 200 V AC 630 V DC / 220 V AC

in µF Dimensions in Millimeters Dimensions in Millimeters

L H T P L H T P

0.01 13.0 9.5 5.0 11.5 13.0 10.0 5.5 11.5

0.015 13.0 9.5 5.0 11.5 13.0 10.0 5.5 11.5

0.022 13.0 9.5 5.0 11.5 13.0 11.0 5.5 11.5

0.033 13.0 9.5 5.0 11.5 13.0 11.5 6.0 11.5

0.047 13.0 10.0 5.5 11.5 18.0 11.5 6.0 16.5

0.056 15.0 10.0 5.5 13.0 18.0 12.0 6.5 16.5

0.068 15.0 10.5 5.5 13.0 18.0 12.5 6.5 16.5

0.082 15.0 11.0 5.5 13.0 18.0 13.0 7.0 16.5

0.1 15.0 12.0 6.0 13.0 18.0 13.5 7.0 16.5

0.15 15.0 12.5 6.5 13.0 18.0 14.5 8.0 16.5

0.22 18.5 12.0 5.0 16.5 24.0 13.0 6.0 21.5

0.33 18.5 13.0 7.0 16.5 24.0 15.5 7.5 21.5

0.47 24.0 13.0 5.5 21.5 24.0 16.5 8.0 21.5

0.56 24.0 13.5 6.5 21.5 24.0 17.5 9.0 21.5

0.68 24.0 14.0 7.0 21.5 24.0 18.5 10.0 21.5

1.0 24.0 18.0 9.0 21.5 31.0 21.0 11.0 27.5

1.5 24.0 20.0 10.0 21.5

Case Dimensions in Millimeters 400V • 630V

Sharma Film Capacitors

MKTMPX SERIES

SAFETY RECOGNIZED FILM CAPACITOR

1. Rated Interference Suppression "X2" Metallized Polypropylene Composite dielectric.

UL 1414 (250V AC), CUL 1414/Canda (250V VAC)

VDE KEMA SEV NEMKO DEMKO SEMKO FIMKO CHINA:

DIN EN 132400 (1994) / IEC60382-14 (1993) AND IEC DRAFT 40 (SEC)677

2. Ideal for using in Line-By-Pass, Antenna Coupling, Across-The-Line and Spark killer

circuits and available for EMI filter and switching power supply and radio-and

monitor, television application.

3. Flame retardant plastic cases and epoxy resin. (compliance with 94V-0)

4. Self-healing properties.

5. Proven series wound construction.

6. Approved By : UL, CSA, VDE, KEMA, SEV, NEMKO, DEMKO, SEMKO, FIMKO, CHINA.

SPECIFICATIONS :

OPERATING TEMPERATURE -40 кto +100 кW max T

RATED VOLTAGE 280VAC max

CAPACITANCE RANGE 0.0022 ~ 4.7uF

DIELECTRIC STRENGTH Applied 1500VDC for 1minute or 2100VDC

for 1 second.

CAPACITANCE TOLERANCE +-10% (K) H max

Measured after a charging voltage 100 ±15VDC

INSULATION RESISTANCE for 1 minute. 25 ±2.0 d O

LESS THAN OR EQUAL TO 0.33PFЊ30,000M:

GREATER THAN 0.33PFЊ10,000M:ΗPF

DISSIPATION FACTOR 0.1% MAX. at 1KHz P±0.5 (Unit : mm)

MAXIMUM PULSE RISE TIME 250 VAC: 120 V/microsecond.

PF SIZE W H T P d O PF SIZE W H T P d O

0.0022 13.0 9.0 4.0 10.0 0.6 0.22 26.5 16.5 7.0 22.5 0.8

0.0027 13.0 9.0 4.0 10.0 0.6 0.27 26.5 16.5 8.5 22.5 0.8

0.0033 13.0 9.0 4.0 10.0 0.6 0.33 18.0 14.5 8.5 15.0 0.8

0.0039 13.0 9.0 4.0 10.0 0.6 0.33 26.5 16.5 7.0 22.5 0.8

0.0047 13.0 12.0 5.0 10.0 0.6 0.33 26.5 17.0 8.5 22.5 0.8

0.0056 13.0 12.0 5.0 10.0 0.6 0.39 26.5 20.0 10.0 22.5 0.8

0.0068 13.0 12.0 5.0 10.0 0.6 0.47 17.5 19.0 11.0 15.0 0.8

0.0082 13.0 12.0 5.0 10.0 0.6 0.47 18.0 16.0 10.0 15.0 0.8

0.01 13.0 12.0 5.0 10.0 0.6 0.47 26.5 17.0 8.5 22.5 0.8

0.012 13.0 12.0 5.0 10.0 0.6 0.47 26.5 20.0 10.0 22.5 0.8

0.015 13.0 12.0 5.0 10.0 0.6 0.47 32.0 20.0 11.0 27.5 0.8

0.018 13.0 12.0 5.0 10.0 0.6 0.56 32.0 20.0 11.0 27.5 0.8

0.022 13.0 12.0 5.0 10.0 0.6 0.68 26.5 20.0 10.0 22.5 0.8

0.027 13.0 12.0 5.0 10.0 0.6 0.68 32.0 20.0 11.0 27.5 0.8

0.033 13.0 12.0 5.0 10.0 0.6 0.82 32.0 22.0 13.0 27.5 0.8

0.039 13.0 12.0 6.0 10.0 0.6 0.82 26.5 20.0 10.0 22.5 0.8

0.047 18.0 11.0 5.0 15.0 0.6 1.0 32.0 20.0 11.0 27.5 0.8

0.047 13.0 12.0 6.0 10.0 0.6 1.0 32.0 22.0 13.0 27.5 0.8

0.056 13.0 12.0 6.0 10.0 0.6 1.0 37.0 25.0 13.5 31.5 0.8

0.068 13.0 12.0 6.0 10.0 0.6 1.5 32.0 22.0 13.0 27.5 0.8

0.068 18.0 11.0 5.0 15.0 0.6 1.5 37.0 26.5 17.0 31.5 0.8

0.082 18.0 12.0 5.5 15.0 0.8 1.8 37.0 29.0 19.0 31.5 0.8

0.1 13.5 12.0 6.0 10.0 0.8 2.0 31.0 31.0 22.0 27.5 0.8

0.1 18.0 12.0 6.0 15.0 0.8 2.0 38.0 28.0 18.0 31.5 0.8

0.1 18.0 11.5 5.5 15.0 0.8 2.2 31.0 31.0 22.0 27.5 0.8

0.12 18.0 13.0 6.5 15.0 0.8 2.2 38.0 29.0 19.0 31.5 0.8

0.15 18.0 13.5 7.5 15.0 0.8 2.5 38.0 30.0 20.0 31.5 0.8

0.15 26.5 15.0 6.0 22.5 0.8 3.0 38.0 30.0 20.0 31.5 0.8

0.18 18.0 14.5 8.5 15.0 0.8 3.3 38.8 31.3 21.7 31.5 0.8

0.18 26.5 16.0 6.0 22.5 0.8 4.0 48.0 30.0 30.0 41.5 0.8

0.22 18.0 14.5 8.5 15.0 0.8 4.7 48.0 30.0 30.0 41.5 0.8D

Dimension Tolerance: +/- 0.5mm

V

DE CQC

Sharma Film Capacitors

Tel: (949)642-7324 SECI Engineers & Buyers' Guide Fax: (949)642-7327