MAC3030-8 Triacs Silicon Bidirectional Thyristors Designed primarily for full-wave AC control applications, such as light dimmers, motor controls, heating controls and power supplies; or wherever full-wave silicon gate controlled solid-state devices are needed. Triac type thyristors switch from a blocking to a conducting state for either polarity of applied main terminal voltage with positive or negative gate triggering. http://onsemi.com TRIACS 8.0 AMPERES RMS 250 VOLTS Features * Blocking Voltage to 250 Volts * All Diffused and Glass Passivated Junctions for Greater Parameter Uniformity and Stability MT2 * Small, Rugged, Thermowatt Construction for Low Thermal * * MT1 G Resistance, High Heat Dissipation and Durability Gate Triggering Guaranteed in Four Modes (Quadrants) Pb-Free Packages are Available* MARKING DIAGRAM MAXIMUM RATINGS (TJ = 25C unless otherwise noted) Symbol Value Unit Peak Repetitive Off-State Voltage (Note 1) (TJ = -40 to +125C, Sine Wave 50 to 60 Hz, Gate Open) VDRM, VRRM 250 V On-State RMS Current (TC = +70C) Full Cycle Sine Wave 50 to 60 Hz IT(RMS) 8.0 A Peak Non-Repetitive Surge Current (One Full Cycle, Sine Wave 60 Hz, TC = +25C) Preceded and followed by rated current ITSM 80 A Circuit Fusing Considerations, (t = 8.3 ms) I2t 26 A2s PGM 20 W PG(AV) 0.35 W IGM 2.0 A Rating Peak Gate Power (TC = +70C, Pulse Width = 10 ms) Average Gate Power (TC = +70C, t = 8.3 ms) Peak Gate Current (TC = +70C, Pulse Width = 10 ms) MAC30308G AYWW 1 2 TO-220AB CASE 221A-07 STYLE 4 3 MAC3030-8 = Standard Device Code MAC30308G = Pb-Free Device Code A = Assembly Location Y = Year WW = Work Week PIN ASSIGNMENT Operating Junction Temperature Range TJ -40 to +125 C 1 Storage Temperature Range Tstg -40 to +150 C 2 Main Terminal 2 3 Gate 4 Main Terminal 2 Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. VDRM and VRRM for all types can be applied on a continuous basis. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. ORDERING INFORMATION Device *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. (c) Semiconductor Components Industries, LLC, 2006 May, 2006 - Rev. 0 1 Main Terminal 1 Package Shipping MAC3030-8 TO-220AB 500 Units/Box MAC3030-8G TO-220AB (Pb-Free) 500 Units/Box Publication Order Number: MAC3030-8/D MAC3030-8 THERMAL CHARACTERISTICS Characteristic Thermal Resistance - Junction-to-Case - Junction-to-Ambient Maximum Lead Temperature for Soldering Purposes 1/8 from Case for 10 Seconds Symbol Value Unit RqJC RqJA 2.0 62.5 C/W TL 260 C ELECTRICAL CHARACTERISTICS (TC = 25C unless otherwise noted; Electricals apply in both directions) Characteristic Symbol Min Typ Max Unit - - - - 10 2.0 mA mA - 1.2 1.65 V OFF CHARACTERISTICS Peak Repetitive Blocking Current (VD = Rated VDRM, VRRM; Gate Open) TJ = 25C TJ = +125C IDRM, IRRM ON CHARACTERISTICS Peak On-State Voltage (ITM = "11 A Peak; Pulse Width = 1 to 2 ms, Duty Cycle p 2%) VTM Gate Trigger Current (Continuous dc) (Main Terminal Voltage = 12 Vdc, RL = 100 Ohms) MT2(+), G(+) MT2(+), G(-) MT2(-), G(-) MT2(-), G(+) IGT Gate Trigger Voltage (Continuous dc) (Main Terminal Voltage = 12 Vdc, RL = 100 W) MT2(+), G(+) MT2(+), G(-) MT2(-), G(-) MT2(-), G(+) VGT Gate Non-Trigger Voltage (Continuous dc) (Main Terminal Voltage = 12 V, RL = 100 W, TJ = +125C) All Four Quadrants mA - - - - 12 12 20 35 50 50 50 75 V - - - - 0.9 0.9 1.1 1.4 2.0 2.0 2.0 2.5 VGD 0.2 - - V Holding Current (Main Terminal Voltage = 12 Vdc, Gate Open, Initiating Current = "200 mA, TC = +25C) IH - 6.0 50 mA Turn-On Time (Rated VDRM, ITM = 11 A) (IGT = 120 mA, Rise Time = 0.1 ms, Pulse Width = 2 ms) tgt - 1.5 - ms dv/dt(c) - 5.0 - V/ms dv/dt - 100 - V/ms DYNAMIC CHARACTERISTICS Critical Rate of Rise of Commutation Voltage (VD = Rated VDRM, ITM = 14 A, Commutating di/dt = 5.0 A/ms, Gate Unenergized, TC = 70C) Critical Rate of Rise of Off-State Voltage (VD = Rated VDRM, Exponential Voltage Rise, Gate Open, TC = +70C) http://onsemi.com 2 MAC3030-8 Voltage Current Characteristic of Triacs (Bidirectional Device) + Current Symbol Parameter VDRM Peak Repetitive Forward Off State Voltage IDRM Peak Forward Blocking Current VRRM Peak Repetitive Reverse Off State Voltage IRRM Peak Reverse Blocking Current VTM Maximum On State Voltage IH Holding Current VTM on state IH IRRM at VRRM off state IH Quadrant 3 MainTerminal 2 - VTM Quadrant Definitions for a Triac MT2 POSITIVE (Positive Half Cycle) + (+) MT2 Quadrant II (+) MT2 Quadrant I (+) IGT GATE (-) IGT GATE MT1 MT1 REF REF IGT - + IGT (-) MT2 Quadrant III Quadrant 1 MainTerminal 2 + (-) MT2 Quadrant IV (+) IGT GATE (-) IGT GATE MT1 MT1 REF REF - MT2 NEGATIVE (Negative Half Cycle) All polarities are referenced to MT1. With in-phase signals (using standard AC lines) quadrants I and III are used. http://onsemi.com 3 + Voltage IDRM at VDRM 14.0 P (AV) , AVERAGE POWER DISSIPATION 130 CONDUCTION ANGLE = 360 10.0 110 100 90 80 70 8.0 6.0 4.0 2.0 0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 IT(RMS), RMS ON-STATE CURRENT (AMPS) 1.0 9.0 10.0 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 IT(RMS), RMS ON-STATE CURRENT (AMPS) Figure 1. Current Derating 100 10.0 100 50 20 10 5.0 2.0 9.0 Figure 2. Power Dissipation ITSM , PEAK SURGE CURRENT (AMP) 0 TJ = 25C TJ = 125C 80 60 CYCLE 40 TC = 70C f = 60 Hz Surge is preceded and followed by rated current 20 0 1.0 1.0 2.0 0.5 3.0 5.0 7.0 10 NUMBER OF CYCLES Figure 4. Maximum Non-Repetitive Surge Current 0.2 VGT , GATE TRIGGER VOLTAGE (NORMALIZED) 60 CONDUCTION ANGLE = 360 12.0 120 IT, INSTANTANEOUS ON-STATE CURRENT (AMPS) TC, MAXIMUM ALLOWABLE CASE TEMPERATURE ( C) MAC3030-8 0.1 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.4 VT, INSTANTANEOUS ON-STATE VOLTAGE (VOLTS) Figure 3. Maximum On-State Characteristics 2.0 OFF-STATE VOLTAGE = 12 Vdc ALL MODES 1.6 1.2 0.8 0.4 0 -60 -40 0 40 -20 20 TC, CASE TEMPERATURE (C) 60 Figure 5. Typical Gate Trigger Voltage http://onsemi.com 4 80 2.8 2.0 IH , HOLDING CURRENT (NORMALIZED) I GT, GATE TRIGGER CURRENT (NORMALIZED) MAC3030-8 OFF-STATE VOLTAGE = 12 Vdc ALL MODES 1.6 1.2 0.8 0.4 0 -60 -40 -20 0 20 40 60 2.4 1.6 1.2 0.8 0.4 0 -60 80 OFF-STATE VOLTAGE = 12 Vdc ALL MODES 2.0 -40 TC, CASE TEMPERATURE (C) 0 20 40 60 80 TC, CASE TEMPERATURE (C) Figure 6. Typical Gate Trigger Current r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) -20 Figure 7. Typical Holding Current 1.0 0.5 0.2 ZqJC(t) = r(t) * RqJC 0.1 0.05 0.02 0.01 0.1 0.2 0.5 1.0 2.0 5.0 20 50 100 t, TIME (ms) Figure 8. Thermal Response http://onsemi.com 5 200 500 1.0 k 2.0 k 5.0 k 10 k MAC3030-8 PACKAGE DIMENSIONS TO-220AB CASE 221A-07 ISSUE AA -T- B F T SEATING PLANE C S 4 Q A 1 2 3 U H K Z R L V J G D N NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. DIM A B C D F G H J K L N Q R S T U V Z INCHES MIN MAX 0.570 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.095 0.105 0.110 0.155 0.014 0.022 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 --- --- 0.080 STYLE 4: PIN 1. 2. 3. 4. MILLIMETERS MIN MAX 14.48 15.75 9.66 10.28 4.07 4.82 0.64 0.88 3.61 3.73 2.42 2.66 2.80 3.93 0.36 0.55 12.70 14.27 1.15 1.52 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 --- --- 2.04 MAIN TERMINAL 1 MAIN TERMINAL 2 GATE MAIN TERMINAL 2 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 http://onsemi.com 6 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MAC3030-8/D