SF2073B * * * * * Designed for 802.16 and WIMAX Receiver IF Application Low Insertion Loss 5.0 X 7.0 mm Surface-Mount Case Differential or Single Ended Input and Output Pb Complies with Directive 2002/95/EC (RoHS) Absolute Maximum Ratings Rating Maximum Incident Power in Passband 456.00 MHz SAW Filter Value Units +13 dBm 30 VDC Max. DC voltage between any 2 terminals Storage Temperature Range -40 to +85 Suitable for lead-free soldering - Max Soldering Temperature C 260C for 30 s SMP-03 Electrical Characteristics Characteristic Nominal Frequency Minimum Insertion Attenuation Amplitude Variation Absolute Group Delay (at fN) Group Delay Variation (p-p) Relative Attenuation Temperature Range Sym fN 5.0 MHz fN 5.2 MHz fN min fN 5.0 MHz 256 to 360 MHz 360 to 416.0 MHz 416 to 443 MHz 468 to 656 MHz 656 to 946 MHz Operating Storage Case Style Lid Symbolization (YY=year, WW=week, S=shift) Notes 1 1 1 1 1 1 1, 2 1, 2 1, 2 1, 2 1, 2 Min Typ 456.000 12.5 0.6 0.8 0.5 35 50 64 40 40 60 Max 14.5 1.5 2.5 0.7 100 35 38 35 35 50 -40 85 -40 85 SMP-03 7 x 5 mm Nominal Footprint RFM SF2073B YYWWS Units MHz dB dB p-p s ns dB C I. 200 ohm Matching ............page 2 II. 50 ohm Matching .............page 4 III. SMI 7035 Matching .......page 6 CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. NOTES: 1. 2. 3. 4. 5. 6. 7. Unless noted otherwise, all specifications apply over the operating temperature range. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. The design, manufacturing process, and specifications of this filter are subject to change. Tape and Reel Standard ANSI / EIA 481. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. US and international patents may apply. Murata, stylized Murata logo, and Murata N.A., Inc. are registered trademarks of Murata Manufacturing Co., Ltd. (c)2010-2014 byMurata Murata Electronics N.A., Inc. Copyright (c) Manufacturing Co., Ltd. All Rights Reserved 2006 SF2073B (R) 4/4/14 Page 1 of 8 www.murata.com I. Impedance Matching for Differential 200 Ohm Load: Coilcraft Inductors (SAW Matched to 200 Ohms Balanced, 4:1 Transformers Account for 2dB of Loss) 1 May 2006 15:05:21 CH1 S11 1 U FS 10 . 383 1 : 54 . 389 456 . 000 000 MHz SF2073B 3 . 6239 CH3 S22 1 : 58 . 283 456 . 000 000 nH 1 U FS 1 . 2910 MHz 450 . 60 pH demo 16 1 1 Cor Cor Full CENTR CH2 456 . 000 S21 MHz LOG SPAN 40 . 000 10 dB/ CENTR MHz 456 . 000 1 : 0 . 0000 REF -15 dB MHz SPAN dB 40 . 000 0 . 000 000 MHz MHz CH2 Max BW : Cor Full 1 cent : Markers REF=1 10 . 165654 MHz 456 . 277377 MHz Q: 44 . 884 3 START 436 . 000 000 2 4 MHz 1_ loss STOP 476 . 000 000 : -14 . 794 dB MHz 1 May 2006 15:13:37 CH1 S21 DEL 50 ns/ REF 580 ns 3 : -1 . 3663 ns -10 . 000 000 MHz SF2073B demo 16 CH1 Smo mean C s . dev p-p Markers REF=2 : 575 . 92 ns : 6 . 9993 ns : 30 . 436 ns 3 Full 2 1 CH3 S21 LOG 1 dB/ REF -15.41 dB 3 : - . 89960 dB -10 . 000 000 MHz CH3 mean C s . dev : -15 Markers REF=2 . 215 dB : . 28750 dB : 1 . 2745 dB 3 CENTER 456 . 000 000 MHz SPAN (c)2010-2014 (c) byMurata Murata Electronics N.A., Inc. Copyright Manufacturing Co., Ltd. All Rights Reserved 2006 SF2073B (R) 4/4/14 p-p 2 1 Page 2 of 8 14 . 000 000 MHz www.murata.com II. Impedance Matching for Single Ended 50 Ohm load 50 ohm 50 ohm 9 Jun 2005 16:00:19 CH1 S21 DEL 20 ns/ REF 626.4 ns 2 : -2 . 3948 ns 10 . 000 000 MHz CH1 Smo mean Cor s . dev p-p Markers REF=1 : 534 . 52 ns : 5 . 6156 ns : 23 . 778 ns PRm 2 1 CH1 CH2 CENTER S21 LOG 456 . 000 000 .5 dB/ MHz SPAN 2 : - . 37890 REF -9.386 dB dB 12 . 000 10 . 000 000 MHz 000 MHz sf2073B narrow span CH2 mean C PRm : -11 Markers REF=1 . 551 dB s . dev : . 10500 dB p-p : . 62390 dB 2 1 CH2 CENTER 456 . 000 000 MHz SPAN (c)2010-2014 (c) byMurata Murata Electronics N.A., Inc. Copyright Manufacturing Co., Ltd. All Rights Reserved 2006 SF2073B (R) 4/4/14 Page 3 of 8 12 . 000 000 MHz www.murata.com II. Impedance Matching for Single Ended 50 Ohm load (continued) 3 Jun 2005 14:55:19 CH1 S11 1 : 50 . 992 456 . 000 000 1 U FS -1 . 4707 MHz 237 . 32 CH3 S22 1 : 47 . 150 456 . 000 000 pF 1 U FS 10 . 828 MHz 3 . 7793 nH 1 1 PRm Cor Cor CENTR CH2 456 . 000 S21 MHz LOG SPAN 80 . 000 10 dB/ MHz CENTR REF -40 dB 456 . 000 1 : 0 . 0000 sf2073B single 50 MHz dB SPAN 0 . 000 80 . 000 000 MHz MHz 1 3 Cor 2 CH2 Max 4 BW : cent : Markers REF=1 10 . 971922 MHz 456 . 090221 MHz Q: 41 . 569 PRm 1_ loss CENTER 456 . 000 000 MHz SPAN (c)2010-2014 (c) byMurata Murata Electronics N.A., Inc. Copyright Manufacturing Co., Ltd. All Rights Reserved 2006 SF2073B (R) 4/4/14 Page 4 of 8 80 . 000 000 : -11 . 233 dB MHz www.murata.com III. Impedance Matching on SMI Radio Board: SMI 7035 (c)2010-2014 (c) byMurata Murata Electronics N.A., Inc. Copyright Manufacturing Co., Ltd. All Rights Reserved 2006 SF2073B (R) 4/4/14 Page 5 of 8 www.murata.com (c)2010-2014 (c) byMurata Murata Electronics N.A., Inc. Copyright Manufacturing Co., Ltd. All Rights Reserved 2006 SF2073B (R) 4/4/14 Page 6 of 8 www.murata.com SMP-03 Case 10-Terminal Ceramic Surface-Mount Case 7 x 5 mm Nominal Footprint Case Dimensions Dimension Min 6.80 4.80 1.50 .47 2.41 0.87 4.87 2.87 1.14 A B C D E H J K P Recommended PCB Footprint mm Nom 7.00 5.00 1.65 0.60 2.54 1.0 5.00 3.00 1.27 Max 7.20 5.20 2.00 .73 2.67 1.13 5.13 3.13 1.40 Min 0.268 0.189 0.059 0.019 0.095 0.034 0.192 0.113 0.045 Inches Nom 0.276 0.197 0.065 0.024 0.100 0.039 0.197 0.118 0.050 Max 0.283 0.205 0.079 0.029 0.105 0.044 0.202 0.123 0.055 Materials Solder Pad Termination Au plating 30 - 60 inches (76.2-152 m) over 80200 inches (203-508 m) Ni. Lid Fe-Ni-Co Alloy Electroless Nickel Plate (8-11% Phosphorus) 100-200 inches Thick Body Al2O3 Ceramic Pb Free Electrical Connections Connection Port 1 Port 2 Terminals Input or Return 10 Return or Input 1 Output or Return 5 Return or Output 6 Ground All others Single Ended Operation Return is ground Differential Operation Return is hot C B E H H J D A P K (c)2010-2014 (c) byMurata Murata Electronics N.A., Inc. Copyright Manufacturing Co., Ltd. All Rights Reserved 2006 SF2073B (R) 4/4/14 Page 7 of 8 www.murata.com Tape and Reel Specifications Quantity Per Reel Inches millimeters 7 178 500 13 330 2000 "B" REF. 100 REF. "B " See Detail "A" 13. 0 12.0 20 .2 2.0 COMPONENT ORIENTATION and DIMENSIONS Carrier Tape Dimensions Tolerance Ao 5.5 mm 0.1mm Bo 7.5 mm 0.1mm Ko 2.0 mm 0.1mm Pitch 8.0 mm 0.1mm W 16.0 mm 0.2mm PIN #1 USER DIRECTION OF FEED (c)2010-2014 (c) byMurata Murata Electronics N.A., Inc. Copyright Manufacturing Co., Ltd. All Rights Reserved 2006 SF2073B (R) 4/4/14 Page 8 of 8 www.murata.com