Lead (Pb)-free Thick Film, Rectangular,
High Value Chip Resistors
www.vishay.com For technical questions, contact: filmresistors.thickfilmchip@vishay.com Document Number: 20022
156 Revision: 13-Oct-08
D../CRCW....-HR e3
Vishay
FEATURES
•High resistance values (up to 470M)
•Suitable for voltage dividers and hybrids
•Metal glaze on high quality ceramic
•Protective overglaze
•Lead (Pb)-free solder contacts on Ni barrier layer
•Pure tin plating provides compatibility with lead (Pb)-free
and lead containing soldering processes
•Compatible with “Restriction of the use of Hazardous
Substances” (RoHS) directive 2002/95/EC (issue 2004)
Notes
•These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over
operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime.
•Marking and packaging: See appropriate catalog or web pages
•Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material
Notes
(1) Measuring conditions in acc. to EN 140401-802
(2) The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the
printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature of 155 °C is not exceeded.
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
SIZE POWER RATING
P70 °C
W
LIMITING
ELEMENT
VOLTAGE
MAX.
V≅
TEMPERATURE
COEFFICIENT
ppm/K
TOLERANCE
%
RESISTANCE
RANGE
Ω
E-SERIES
INCH METRIC
D11/CRCW0603-HR 0603 1608 0.1 75 ± 500 ± 5 11M - 470M 24
D12/CRCW0805-HR 0805 2012 0.125 150 ± 500 ± 5 11M - 470M 24
D25/CRCW1206-HR 1206 3216 0.25 200 ± 500 ± 5 11M - 470M 24
TECHNICAL SPECIFICATIONS
PARAMETER UNIT D11/CRCW0603-HR D12/CRCW0805-HR D25/CRCW1206-HR
Rated Dissipation at 70
°
C (2) W 0.1 0.125 0.25
Limiting Element Voltage V≅75 150 200
Voltage Coefficient %/V < 100M: < 0.1/> 100M: < 0.3
Insulation Voltage (1 min) Vdc/ac peak > 100 > 200 > 300
Thermal Resistance (1) K/W ≤ 550 ≤ 440 ≤ 220
Insulation Resistance Ω> 10 9
Category Temperature Range
°
C - 55 to + 155
Weight/1000 pieces g 2 5.5 10
Document Number: 20022 For technical questions, contact: filmresistors.thickfilmchip@vishay.com www.vishay.com
Revision: 13-Oct-08 157
D../CRCW....-HR e3
Lead (Pb)-free Thick Film, Rectangular,
High Value Chip Resistors Vishay
Notes
(1) Preferred way for ordering products is by use of the PART NUMBER
(2) Please refer to table PACKAGING, see next page
DIMENSIONS
PART NUMBER AND PRODUCT DESCRIPTION
PART NUMBER: CRCW060316M0JPEAHR (1)
MODEL/SIZE VALUE TOLERANCE TCR PAC KAG IN G
(2)
SPECIAL
CRCW0603
CRCW0805
CRCW1206
M = Million J = ± 5 %
P
= ± 500 ppm/K
EA
EB
EC
EI
EL
Up to 2 digits
HR = High Value
Product Description: D11/CRCW0603-HR 500 16M 5 % ET1 e3
D11/CRCW0603-HR 500 16M 5 % ET1 e3
MODEL TCR RESISTANCE VALUE TOLERANCE
PA C KA G I N G
(2)
LEAD (Pb)-FREE
D11/CRCW0603-HR
D12/CRCW0805-HR
D25/CRCW1206-HR
± 500 ppm/K 68M = 68 MΩ
227M = 227 MΩ
± 5 % ET1
ET5
ET6
EG1
E20
e3 = Pure tin
Termination finish
PACKAGING
MODEL
REEL BULK
TAPE
WIDTH DIAMETER PITCH PIECES/
REEL
PACKAGING CODE
PIECES
PACKAGING CODE
PART NUMBER PRODUCT DESC. PART
NUMBER
PRODUCT
DESC.
PAPER BLISTER PAPER BLISTER
D11/CRCW0603-HR 8 mm
180 mm/7" 4 mm 5000 EA EI ET1 EG1
25 000 EY E27285 mm/11.25" 4 mm 10 000 EB ET5
330 mm/13" 4 mm 20 000 EC EL ET6 E20
D12/CRCW0805-HR 8 mm
180 mm/7" 4 mm 5000 EA EI ET1 EG1
10 000 EY E27285 mm/11.25" 4 mm 10 000 EB ET5
330 mm/13" 4 mm 20 000 EC EL ET6 E20
D25/CRCW1206-HR 8 mm
180 mm/7" 4 mm 5 000 EA EI ET1 EG1
285 mm/11.25" 4 mm 10 000 EB ET5
330 mm/13" 4 mm 20 000 EC EL ET6 E20
SIZE DIMENSIONS [in millimeters]
INCH METRIC
LW H T1T2
0603 1608 1.55
+ 0.10
- 0.05
0.85 ± 0.1 0.45 ± 0.05 0.3 ± 0.2 0.3 ± 0.2
0805 2012 2.0
+ 0.20
- 0.10
1.25 ± 0.15
0.45 ± 0.05 0.3
+ 0.20
- 0.10
0.3 ± 0.2
1206 3216 3.2
+ 0.10
- 0.20
1.6 ± 0.15 0.55 ± 0.05 0.45 ± 0.2 0.4 ± 0.2
SIZE
SOLDER PAD DIMENSIONS
[in millimeters]
REFLOW SOLDERING WAVE SOLDERING
INCH METRIC a b l a b l
0603 1608 0.5 0.9 1.0 0.9 0.9 1.0
0805 2012 0.7 1.3 1.2 0.9 1.3 1.3
1206 3216 0.9 1.7 2.0 1.1 1.7 2.3
C R C W 0 6 0 3 1 6 M 0 J P E A H R
www.vishay.com For technical questions, contact: filmresistors.thickfilmchip@vishay.com Document Number: 20022
158 Revision: 13-Oct-08
D../CRCW....-HR e3
Vishay Lead (Pb)-free Thick Film, Rectangular,
High Value Chip Resistors
0402 0603 0805 1206 1210
2010
2512
90
80
70
60
50
40
30
20
10
0 0 0.1 0.2 0.3 0.4 0.5
Power in W
Temperature Rise in °C
1218
Temperature Rise
- 55 - 25 0 25 50 75 100 125 155 175
120
100
80
60
40
20
0
70
DeratingAmbient Temperature in °C
Rated Power in %
TEST PROCEDURES AND REQUIREMENTS
EN 60115-1
TEST (clause) CONDITIONS OF TEST
REQUIREMENTS
PERMISSIBLE CHANGE (ΔR/R)
STABILITY CLASS 2
OR BETTER
Stability for product types:
D../CRCW...-HR e3 11 MΩto 470 MΩ
Resistance (4.5) - ± 5 %
Temperature coefficient (4.8.4.2) 20/- 55/20 °C and
20/125/20 °C ± 500 ppm/K
Overload (4.13)
U = 2.5 × (P70 × R)1/2
≤ 2 × Umax.;
Duration: according the style
± (0.5 % R + 0.05 Ω)
Solderability (4.17.5)
Aging 4 h at 155 °C, dryheat
solder bath method; 235 °C; 2 s
visual examination
Good tinning (≥ 95 % covered)
no visible damage
Resistance to soldering heat (4.18.2) Solder bath method;
(260 ± 5) °C; (10 ± 1) s ± (0.5 % R + 0.05 Ω)
Rapid change of temperature (4.19) 30 min at LCT = - 55 °C;
30 min at UCT = 125 °C; 5 cycles ± (0.5 % R + 0.05 Ω)
Damp heat, steady state (4.24) (40 ± 2) °C; 56 days;
(93 ± 3) % RH ± (2 % R + 0.1 Ω)
Climatic sequence (4.23)
16 h at UCT = 125 °C; 1 cycle at 55 °C;
2 h at LCT = - 55 °C;
1 h/1 kPa at 15 °C to 35 °C;
5 cycles at 55 °C
U = (P70 × R)1/2
U = Umax.; whichever is less severe
± (2 % R + 0.1 Ω)
Endurance at 70 °C (4.25.1)
U = (P70 × R)1/2
U = Umax.; whichever is less severe
1.5 h ON; 0.5 h OFF;
70 °C; 1000 h
± (2 % R + 0.1 Ω)
Extended endurance (4.25.1.8) Duration extended to 8000 h ± (4 % R + 0.1 Ω)
Endurance at upper category temperature
(4.25.3) UCT = 125 °C; 1000 h ± (2 % R + 0.1 Ω)
Document Number: 20022 For technical questions, contact: filmresistors.thickfilmchip@vishay.com www.vishay.com
Revision: 13-Oct-08 159
D../CRCW....-HR e3
Lead (Pb)-free Thick Film, Rectangular,
High Value Chip Resistors Vishay
APPLICABLE SPECIFICATIONS
• EN 60115-1 Generic Specification
• EN 140400 Sectional Specification
• EN 140401-802 Detail Specification
• IEC 60068-2-X Variety of environmental test procedures
• IEC 60286-3 Packaging of SMD components
Document Number: 91000 www.vishay.com
Revision: 11-Mar-11 1
Disclaimer
Legal Disclaimer Notice
Vishay
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
