0403HQ-9N0XJLU - Coilcraft - Datasheet.Directory

Taiwan

China

Singapore

+1-847-639-6400 sales@coilcraft.com

+44-1236-730595 sales@coilcraft-europe.com

+886-2-2264 3646 sales@coilcraft.com.tw

+86-21-6218 8074 sales@coilcraft.com.cn

+ 65-6484 8412 sales@coilcraft.com.sg

This product may not be used in medical or high

risk applications without prior Coilcraft appr

oval.

Specification subject to change without notice.

Please check web site for latest infor

mation.

Chip Inductors - 0403HQ (1008)

Document 300-1

SRF DCR

Inductance2 Percent Q 900 MHz 1.7 GHz

typ4

max5 Irms6

Part number1 (nH) tolerance

min3 L typ Q typ L typ Q typ (GHz) (Ohms) (A)

0403HQ-1N9XJE_ 1.9 5 40 1.9 62 1.9 94 11.84 0.012 2.2

0403HQ-2N1XJE_ 2.1 5 35 2.1 56 2.1 88 12.40 0.019 1.8

0403HQ-3N4XJE_ 3.4 5 40 3.4 66 3.5 96 8.97 0.016 1.9

0403HQ-3N7XJE_ 3.7 5 40 3.7 64 3.8 95 8.65 0.018 1.8

0403HQ-5N5XJE_ 5.5 5 40 5.5 62 5.7 93 8.60 0.022 1.5

0403HQ-6N6XJE_ 6.6 5 40 6.6 60 6.9 92 7.30 0.046 1.1

0403HQ-8N2XJE_ 8.2 5 40 8.2 63 8.5 92 6.73 0.040 1.2

0403HQ-9N0XJE_ 9.0 5 40 9.1 66 9.5 90 6.85 0.055 1.0

0403HQ-12NXJE_ 12 5 40 12.1 60 12.7 90 5.82 0.065 0.80

0403HQ-15NXJE_ 15 5 35 15.2 60 16.0 90 5.82 0.188 0.50

0403HQ-18NXJE_ 18 5 35 18.2 62 19.6 93 5.15 0.185 0.50

• Very high Q factors and excellent current handling

• Intermediate L values not found in other series

1. When ordering, please specify termination and packaging codes:

0403HQ-18NXJEW

Termination: E = Halogen free component. RoHS compliant silver-

palladium-platinum-glass frit terminations.

L = RoHS compliant, not halogen-free. Silver-palladium-

platinum-glass frit terminations.

Special order: T = RoHS tin-silver-copper (95.5/4/0.5)

or S = non-RoHS tin-lead (63/37).

Packaging: W = 7″ machine-ready reel. EIA-481 punched paper

tape (2000 parts per full reel).

U = Less than full reel. In tape, but not machine ready.

To have a leader and trailer added ($25 charge),

use code letter W instead.

2. Inductance measured at 500 MHz using a Coilcraft SMD-F ﬁxture in an

Agilent/HP 4286 impedance analyzer with Coilcraft-provided correla-

tion pieces.

3. Q measured at 500 MHz using an Agilent/HP 4291A with an Agilent/

HP 16193 test ﬁxture.

4. SRF measured using an Agilent/HP 8722ES network analyzer and a

test ﬁxture with a 0.017″ air gap.

5. DCR measured on a micro-ohmmeter and a Coilcraft CCF858 test

ﬁxture.

6. Current that causes a 30°C temperature rise from 25°C ambient. This

information is for reference only and does not represent absolute maxi-

mum ratings.

Refer to Doc 362 “Soldering Surface Mount Components” before soldering.

Designer’s Kit C371 contains 20 of each value

Core material Ceramic

Environmental RoHS compliant, halogen free

Terminations Silver-palladium-platinum-glass frit. Other terminations

available at additional cost.

Weight 1.29 – 1.60 mg

Ambient temperature –40°C to +125°C with Irms current

Maximum part temperature +155°C (ambient + temp rise).

Storage temperature Component: –40°C to +155°C.

Tape and reel packaging: –40°C to +80°C

Resistance to soldering heat Max three 40 second reﬂows at

+260°C, parts cooled to room temperature between cycles

Temperature Coefﬁcient of Inductance (TCL) +25 to +125 ppm/°C

Moisture Sensitivity Level (MSL) 1 (unlimited ﬂoor life at <30°C /

85% relative humidity)

Failures in Time (FIT) / Mean Time Between Failures (MTBF)

One per billion hours / one billion hours, calculated per Telcordia SR-332

Packaging 2000 per 7″ reel; 7500 per 13″ reel;

Paper tape: 8 mm wide, 1.0 mm thick, 2 mm pocket spacing,

PCB washing Tested to MIL-STD-202 Method 215 plus an additional

aqueous wash. See Doc787_PCB_Washing.pdf.

Document 300-1 Revised 10/12/15

Sample

& buy

Support

& FAQ

Web

page

Tools &

softw

are

Taiwan

China

Singapore

+1-847-639-6400 sales@coilcraft.com

+44-1236-730595 sales@coilcraft-europe.com

+886-2-2264 3646 sales@coilcraft.com.tw

+86-21-6218 8074 sales@coilcraft.com.cn

+ 65-6484 8412 sales@coilcraft.com.sg

This product may not be used in medical or high

risk applications without prior Coilcraft appr

oval.

Specification subject to change without notice.

Please check web site for latest infor

mation.

Document 300-2

Document 300-2 Revised 10/12/15

0403HQ Series (1008)

Typical L vs Frequency Typical Q vs Frequency

110 100 1000 10000

Frequency (MHz)

Inductance (nH)

1.9 nH

8.2 nH

12.0 nH

18.0 nH

110 100 1000 10000

Frequency (MHz)

100

Q Factor

1.9 nH

8.2 nH

12.0 nH

18.0 nH

A B C

max max max D E F G H I

0.047 0.034 0.028 0.030 0.009 0.022 0.040 0.014 0.018 inches

1,19 0,86 0,71 0,76 0,23 0,56 1,02 0,36 0,46 mm

overall

terminal

Recommended

Land Pattern

Terminal wraparound:

approx 0.007/0,18 both ends

Pick and

place

material

Note: Height dimension (C) is before optional solder application. For maximum

height dimension including solder, add 0.006 in / 0,152 mm.