PMU Bauform / Size : 3924 ISA-PLAN(R) - SMD Prazisionswiderstande / SMD precision resistors Technische Daten / technical data Widerstandswerte Resistance values 2 - 500 mOhm Toleranz Tolerance 1 %, 2 %, 5 % Temperaturkoeffizient Temperature coefficient < 30 ppm/K (20 C - 60 C) Temperaturbereich Applicable temperature range -55 C bis/to +170 C Belastbarkeit Load capacity 5W Innerer Warmewiderstand (Rthi) Internal heat resistance (Rthi) < 8 K/W Isolationsspannung Dielectric withstanding voltage 100 VAC Induktivitat Inductance < 10 nH Stabilitat (Nennlast) Abweichung TK= Kontaktstellentemperatur / Stability (nominal load) deviation TK= Terminal temperature < 0.5 % nach/after 2000 h (TK = 100 C) < 1 % nach/after 2000 h (TK = 130 C) Merkmale / features * 5 W Dauerleistung 5 W permanent power * Dauerstrome bis 50 A (2 mOhm) Constant current up to 50 A (2 mOhm) * Vier-Leiter Messwiderstand Resistor with Kelvin connection * Vergoldete Bondflachen Au-plated bond pads * vergoldete Bauteilruckseite Reverse side covered with gold flash * Geeignet fur Lottemperaturen bis 280 C / 30 sek oder 250 C / 5 min Max. solder temperature up to 280 C / 30 sec or 250 C / 5 min * Bauteilmontage: Reflow-Loten und Kleben auf Substrat Mounting: reflow-soldering and epoxy attachment on substrate Bauform/Size 3924 Applikationen / application * Messwiderstand fur Leistungshybride Current sensor for power hybrid applications * Frequenzumrichter Frequency converters * Leistungsmodule Power modules Abmessungen [mm] / Dimensions [mm] Den aktuellen Stand des Datenblattes finden Sie auf unserer Internetseite - The current valid issue of the data sheet can be found on our website e-mail: sales.components@isabellenhuette.de - Internet: www.isabellenhuette.de Ausgabe / Issue PMU-2012-02-01 1/4 PMU Bauform / Size : 3924 TK, Lastminderung und Langzeitstabilitat / TCR, power derating and long term stability dR/R20 [%] Temperaturabhangigkeit des elektrischen Widerstandes von MANGANIN(R)-Widerstanden / Temperature dependence of the electrical resistance of MANGANIN(R)-resistors Grenzkurve / Limiting curve Typische Temperaturabhangigkeit eines PMU Widerstandes / Typical temperature dependence of a PMU resistor Temperatur [C] / Temperature [C] Lastminderungskurve / Power derating curve Verbesserte Stabilitat / Improved stability < 0.5 % Stabilitat / Stability <1 % Kontaktstellentemperatur TK [C] / Terminal temperature TK [C] Den aktuellen Stand des Datenblattes finden Sie auf unserer Internetseite - The current valid issue of the data sheet can be found on our website e-mail: sales.components@isabellenhuette.de - Internet: www.isabellenhuette.de Ausgabe / Issue PMU-2012-02-01 2/4 PMU Bauform / Size : 3924 Vorschlag fur die Gestaltung der Lot- und Bondpads / Proposal for solder and bond pad design Abmessungen [mm] / Dimensions [mm] Lotprofil Vorschlag / Recommended solder profile Reflow-, IR-loten / Reflow-, IR-soldering Temperatur / Temperature [C] 260 255 217 Zeit / Time [s] peak 40 90 RoHS 2002/95/EG konform seit Produktstart Ausfuhrliche Informationen erhalten Sie auf unserer Homepage: www.isabellenhuette.de RoHS 2002/95/EC compliance since product launch. For more information please visit our website: www.isabellenhuette.de Gurtinformationen / TAPE & REEL INFORMATION Norm / Specification DIN EN 60286-3 Gurtbreite / Tape width 16 mm Anzahl Bauteile / Parts per reel 3000 Bestellbezeichnung / ordering code PMU-C-R002-1.0 Typ / Type Layout Widerstandswert / Resistance value Toleranz / Tolerance PMU C 2 mOhm 1.0 % Gewahrleistung Alle Angaben uber Eignung, Verarbeitung und Anwendung unserer Produkte, technische Beratung und sonstige Angaben erfolgen nach bestem Wissen, befreien den Kaufer jedoch nicht von eigenen Prufungen und Versuchen. Warranty All information regarding the suitability, workability and applicability of our products, all technical advice and other information are provided to the best of our knowledge and belief, but shall not discharge the buyer from his own examinations and tests. Den aktuellen Stand des Datenblattes finden Sie auf unserer Internetseite - The current valid issue of the data sheet can be found on our website e-mail: sales.components@isabellenhuette.de - Internet: www.isabellenhuette.de Ausgabe / Issue PMU-2012-02-01 3/4 PMU Bauform / Size : 3924 Grenzkurve fur maximale Pulsenergie bzw. Pulsleistung fur Dauerbetrieb / Maximum pulse energy respectively pulse power for continuous operation 10000 1000 ____ dR/R0 < 1% nach 1.000.000 Zyklen /after 1.000.000 cycles - - - - dR/R0 < 1% nach 10.000 Zyklen /after 10.000 cycles Die dargestellte Kurve gilt fur den Widerstandswert R002. Fur andere Werte kann die Kurve im unteren Bereich ggf. anders verlaufen, so dass in Grenzbereichen eine separate Qualifikation erfolgen sollte. / This curve is only valid for the resistance value R002. The shape of the curve in the range below 0.1 sec will be different for other resistance values. Therefore a separate qualification should be made for pulse power close to the above curve. Spezifikation / Specification Parameters Test Conditions Specification Typical data Maximum Temperature for full power operation 120 C 120 C 130 C Working Temperature -55 to 170 C -55 to 170 C -55 to 170 C Thermal Shock MIL-STD-202 method 107-B1 0.1 % 0.05 % Overload MIL-R-26E (5 times rated power, 5 sec) 0.2 % 0.1 % Solderability MIL-STD-202 method 208 > 95 % coverage 99 % Resistance to Solvents MIL-STD-202 method 215, 2.1a, 2.1d no damage no damage Low Temperature Storage and Operation MIL-STD-26E 0.1 % 0.05 % Resistance to Soldering Heat MIL-STD-202 method 210 0.1 % 0.05 % Moisture Resistance MIL-STD-202 method 106 0.1 % 0.03 % Shock MIL-STD-202 method 213-A 0.2 % 0.1 % Vibration, High Frequency MIL-STD-202 method 204-B 0.2 % 0.1 % Life MIL-STD-26E 0.2 % 0.15 % Storage Life at Elevated Temperature MIL-STD-202 method 108-F 0.3 % 0.2 % High Temperature Exposure 140 C, 2000 h 0.2 % 0.2 % 0.005 % Current Noise MIL-STD-202 method 308 0.01 % Voltage Coefficient (%/V) MIL-STD-202 method 309 linearity error less than 120dB Resistance Temperature Characteristic MIL-STD-202 method 304 (20-60C) <30 ppm/K <30 ppm/K Thermal EMF 0 - 100 C 2 V/K max. <1 V/K Frequency Characteristic inductivity < 10 nH <10 nH Den aktuellen Stand des Datenblattes finden Sie auf unserer Internetseite - The current valid issue of the data sheet can be found on our website e-mail: sales.components@isabellenhuette.de - Internet: www.isabellenhuette.de Isabellenhutte Heusler GmbH & Co. KG Ausgabe / Issue PMU-2012-02-01 Eibacher Weg 3-5 - D-35683 Dillenburg - Telefon / Phone +49 (0) 27 71 9 34 - 0 - Fax: +49 (0) 27 71 2 30 30 4/4