SSRM Series Solid State Relays SSRM series 45-65A DIN Mount Solid State Relay With Paired SCR Output, Integral Heatsink File E29244 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to confirm the product meets the requirements for a given application. Features Engineering Data * * * * * * * * Form: 1 Form A (SPST-NO). Duty: Continuous. Isolation: 4,000V rms input-to-output-to-ground. Insulation Resistance: 109 Ohms, minimum, at 500VDC. Capacitance: 8.0 pf maximum (input to output). Temperature Range: Storage: -40C to +125C Operating: -40C to + 80C Case and Mounting: Refer to outline dimension drawing. Termination: Control: Finger safe (IP20) screw clamps accepting wire size up to #12 AWG (2.5 mm). Load: Finger safe (IP20) screw clamps accepting wire size up to #8 AWG (3.8 mm). Ground: #10 screw with 5/16 in. hex/slottted head. Installation Spacing: Minimum 0.8 in (20 mm) space between units. Approximate Weight: 16.9 oz. (479 g). DIN mount design with integral heatsink. Choice of 45, 55 or 65A rms inverse-parallel connected SCR output. 48 - 660VAC output. 4 -32VDC or 90 - 140Vrms input control. 4,000V rms optical isolation. Green LED input status indicator. Finger-safe (IP20) screw clamp terminals for load and control. Ground terminal. Ordering Information Sample Part Number SSRM -600 A 55 1. Basic Series: SSRM = Solid State Relay with Integral Heatsink for DIN Rail Mounting 2. Line Voltage: 600 = 48 - 660 VAC 3. Input Type & Voltage: A = 90 - 140VAC D = 4 - 32VDC 4. Maximum Switching Rating/Output: 45 = 45.0A rms 55 = 55.0A rms 65 = 65.0A rms Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. SSRM-600A45 SSRM-600D45 SSRM-600A55 SSRM-600D55 SSRM-600A65 SSRM-600D65 Input Specifications Parameter Conditions AC Control Units DC Control Units Control Voltage Range V IN @ 25C 90 - 140 Vrms 4.0 - 32 VDC Reverse Voltage V IN (Max.) @ 25C -- 32 VDC Must Operate Voltage VIN(OP) (Min.) Must Release Voltage V IN(REL) (Min.) @ 25C @ 25C 90 Vrms 10 Vrms 4.0 VDC 1.0 VDC Input Current (Typ.) @ 25C 15 mA @ 120 Vrms 14 mA @ 5 VDC Input Current (Max.) @ 25C -- 30 mA Issued 4-09 www.tycoelectronics.com 1 Dimensions are in inches over (millimeters) unless otherwise specified. Dimensions are shown for reference purposes only. Specifications and availability subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080208 1 SSRM Series Solid State Relays Output Specifications (@ 25 C, unless otherwise specified) Parameter Conditions Units 45A Rated Units 55A Rated Units 65A Rated Units V rms 48 - 660 48 - 660 48 - 660 Repetitive Blocking Voltage (Min.) V peak 1200 1200 1200 Load Current Range I L* A rms 0.15 - 45.0 0.25 - 55.0 0.25 - 65.0 1,200 Load Voltage Range VL f = 47 - 63 Hz. Single Cycle Surge Current (Min.) Leakage Current (Off-State) (Max.) f = 60 Hz. VL = 600Vrms A peak 625 1,000 mA rms 1.0 1.0 1.0 C/W 0.63 0.31 0.28 1.7 500 1.7 500 500 Thermal Resistance Junction to Case R J-C (Max.) 1.7 On-State Voltage Drop (Max.) I L = Max. V peak Static dv/dt (Off-State) (Min.) V L = Max. V/s Turn-On Time (Max.) f = 60 Hz. ms 8.3 for DC Input Models, 10.0 for AC Input Models Turn-Off Time (Max.) f = 60 Hz. ms 8.3 for DC Input Models, 40.0 for AC Input Models I 2 t Rating (Max.) Load Power Factor Rating (Min.) t = 8.3 ms A2 Sec. I L = Max. 1,620 4,150 6,000 0.5 0.5 0.5 *See Thermal Derating Curves. Electrical Characteristics (Thermal Derating Curves) 40 30 20 10 20 30 40 50 60 70 Ambient Temperature (C) 90 Output Current (Arms) 50 10 65 A 55 A Output Current (Arms) Output Current (Arms) 45 A 60 75 60 45 30 15 80 10 20 30 40 50 60 70 Ambient Temperature (C) 90 75 60 45 30 15 10 80 20 30 40 50 60 70 Ambient Temperature (C) 80 Outline Dimensions MOUNTING HOLE 0.17 (4.3) DIA. U TU I NP 3.5 (88.9) S 1.0 (25.4) 0.75 (19.1) T ST A INPUT 3.0 (76.2) OUTPUT 2.5 (63.5) MOUNTING SLOT 0.17 x 0.20 (4.3 x 5.1) Disclaimer While Tyco Electronics has made every reasonable effort to ensure the accuracy of the information in this document, Tyco Electronics does not guarantee that it is error-free, nor does Tyco Electronics make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. 1.75 (44.5) .9 (22.9) Tyco Electronics reserves the right to make any adjustments to the information contained herein at any time without notice. Tyco Electronics expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. 3.0 (76.2) 4.3 (109.2) BLACK ANODIZED ALUMINUM HEATSINK The dimensions in this catalog are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult Tyco Electronics for the latest dimensions and design specifications. Recommended Torque Range for Terminal Screws: Control: 5 - 6 in lb (0.6 - 0.7 Nm). Output: 10 - 15 in lb (1.1 - 1.7 Nm). (c) 2009 by Tyco Electronics Corporation. All Rights Reserved. TE logo and Tyco Electronics are trademarks. Catalog 8-1773454-5 Issued 4-09 2 www.tycoelectronics.com Dimensions are in inches over (millimeters) unless otherwise specified. Dimensions are shown for reference purposes only. Specifications and availability subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080208