Title/Subject : DLP Pico Projector Development Kit Version 2.0 Specifications VERSIO UPDATE N DATE B 2009/12/16 EDITED BY REVIEWED BY APPROVED BY Benson Hong Arthur Cheng Jim C.C. Chen Item Unit Min. Module size mm Module Volume cc Brightness lm 6.0 Bright Uniformity % 50% Typ. 7.0 JBMA Standard mm 400 ratio 1.89 0.04 CIE x(P10~P13) - CIE x(P5) 0.06 CIE y(P10~P13) - CIE y(P5) Reference on 10" image size -Projection Distance/Width of Image, HVGA panel % 100 Focus Range mm 200 2640 image Diagonal Size inch 5 66 Focus Stroke mm Non-Operating Temperature Item DMD 2W for LED Offset Focus Mechanism Remark 68 x 45 x 14mm1.0mm 1. 1.0mm tolerance in each dimension 2. SOW specification is 71x45x14.5mm 435.0 Color Uniformity (CIE x) Color Uniformity (CIE y) Reference Projection distance from the end surface PJ Lens Engine Performance Throw Ratio Max. It should be on focus at mim. & max. projection distance. 0.7 manual -40 Unit Min. 85 Typ. Max. Remark Pannel Size inch 0.17" Corner illumination Resolution Pixels HVGA No. of Pixels : 153,600 (320*480) Aspect Ratio ratio 3:2 Mirror Tilt-half angle Degrees 11 12 13 Axis of Rotation Degrees -1 0 1 Die Parallelism mm Efficiency % Red LED Wavelength nm 615 621 625 Green LED Wavelength nm 525 532 535 Blue LED Wavelength nm 450 456 460 Die Size-RED mm x mm 1 Die Size-GREEN mm x mm 1 Die Size-BLUE mm x mm 1 0.04 68 LED Total LED power consumption: 2W Color Reproduction Compatible Scanning Frequency Electric Parameter Input Signal Terminal Full 16.7 Million Colors Horizontal (kHz): 31.5 kHz Vertical (Hz): 60Hz, 50Hz Mini HDMI (C type) Input Signal Format DVI-D: VGA (640*480, 60Hz) Control Interface I2C Power Consumption 3.2 ~ 3.6W