Home / Products / Accessories / Eragon™: EIC-LCD-1080P
Block Diagram
Eragon™: EIC-LCD-1080P
eInfochips EIC-LCD-1080P, is a 5.5” touch screen LCD display that
can be used with both Eragon 410 and Eragon 820 development
kits. This LCD supports 1080 x1920 (FHD) resolution, and operates
at 5V voltage supply. It integrates with Eragon 410/Eragon 820 over
MIPI DSI interface (4 lane) and uses I2C for touch interface
configuration.
Interface Type: MIPI DSI
LCD Type: IPS TFT-LCD
Backlight Type: White
LED(14*LED)
Display Resolution: 1080 x
1920 (Maximum)
Framerate supported: 60
Bit Per Pixel (BPP): 24
Pixel stream type: Packed
pixel stream, RGB888 (24
bits per pixels)
Carrier to LCD Cable: 40 -
pins FFC Cable
LCD-Active area – Outline
dimensions (W x H):
68.04mm(W) x
120.96mm(H)
Pixel pitch - 0.063mm x
0.063mm
Panel Type : Video Mode
Source output voltage level
GVDDP-GND: 2.85 ~ 6V,
GVDDN-GND: -2.85 ~ -6V
System Interfaces
MIPI DSI 4 data lane
I2C (8-bits)
Display Modes
Power saving mode
(standby / deep standby)
Operating Temperature:
70° C ± 2° C; -20° C ± 2° C
Ambient Temperature: 80°
C ± 2° C; -30° C ± 2° C
Built–in OTP (4 Times) to
store VCOM/GVDD
calibration and ID1~ID3
Built–in OTP (1 Times) to
store gamma, panel
timing, and analog power
setting
Built-in internal oscillator
and hardware reset
Quantity -