Darlington Power Transistors NPN Silicon The Darlington transistors are designed for high-voltage, highspeed, power switching in inductive circuits where fall time is critical. They are particularly suited for line operated switch-mode applications such as: Features: TO-3 * * * * * Continuous Collector Current - lc = 20 A Switching Regulators Inverters Solenoid and Relay Drivers Motor Controls Dimensions Minimum Maximum A 38.75 39.96 B 19.28 22.23 C 7.96 9.28 D 11.18 12.19 E 25.2 26.67 F 0.92 1.09 G 1.38 1.62 H 29.9 30.4 I 16.64 17.3 J 3.88 4.36 K 10.67 11.18 Pin 1. Base 2. Emitter Collector (Case) Dimensions : Millimetres Maximum Ratings Characteristic Symbol MJ10005 VCEV 500 VCEX (SUS) 450 VCEO (SUS) 400 VEBO 8 IC ICM 20 30 Base Current IB 2.5 Total Power Dissipation at TC = 25C at TC = 100C Derate above 25C PD 175 100 1 W W W / C TJ, TSTG -65 to +200 C Characteristic Symbol Maximum Unit Thermal Resistance Junction to Case Rjc 1 C / W Collector - Emitter Voltage Emitter - Base Voltage Collector Current - Continuous - Peak Operating and Storage Junction Temperature Range Unit V A Thermal Characteristics www.element14.com www.farnell.com www.newark.com Page <1> 11/06/12 V1.1 Darlington Power Transistors NPN Silicon PD, Power Dissipation (W) Figure - 1 Power Derating TC, Temperature (C) Electrical Characteristics (TC = 25C unless otherwise noted) Characteristic Symbol Minimum Maximum Unit VCEO (sus) 400 - V ICER - 5 ICEV - 0.25 5 IEBO - 175 hFE 50 40 600 400 VCE (sat) - VBE (sat) - OFF Characteristics Collector - Emitter Sustaining Voltage MJ10005 (IC = 250 mA, IB = 0, VClamp = Rate VCEO) Collector Cut off Current (VCE = Rated VCEV, RBE = 50 , TC = 100C) Collector Cut off Current (VCEV = Rated Value, VBE (OFF) = 1.5 V) (VCEV = Rated Value, VBE (OFF) = 1.5 V, TC = 100C) Emitter Cut off Current (VEB = 2 V, IC = 0) mA ON Characteristics (1) DC Current Gain (IC = 5 A, VCE = 5 V) (IC = 10 A, VCE = 5 V) Collector - Emitter Saturation Voltage (IC = 10 A, IB = 400 mA) (IC = 20 A, IB = 2 A) (IC = 10 A, IB = 400 mA, TC = 100C) Base - Emitter Saturation Voltage (IC = 10 A, IB = 400 mA) (IC = 10 A, IB = 400 mA, TC = 100C) Diode Forward Voltage (IF = 10 A) - 1.9 3 2 V VF 2.5 2.5 5 Dynamic Characteristics Small - Signal Current Gain (2) (IC = 1 A, VCE = 10 V, f = 1 MHz) Output Capacitance (VCB = 10 V, IE = 0 V, f = 100 kHz) | hfe | 10 - - Cob 100 - pF td - 0.2 tr - 0.6 ts - 1.5 tf - 0.5 Switching Characteristics Delay Time Rise Time Storage Time Fall Time VCC = 250 V, lC = 10 A IB1 = 400 mA, VBE (o(f) = 5 V tp = 50 s, Duty Cycle 2% s (1) Pulse Test: Pulse Width = 300 s, Duty Cycle 2% (2) fT = |hfe| ftest www.element14.com www.farnell.com www.newark.com Page <2> 11/06/12 V1.1 Darlington Power Transistors NPN Silicon Collector Saturation Region hFE, DC Current Gain VCE, Collector Emitter Voltage (V) DC Current Gain IC, Collector Current (A) IB, Base Current (A) Base Emitter Voltage V, Voltage (V) V, Voltage (V) Collector Emitter Saturation Voltage IC, Collector Current (A) Collector Cut -off Region Output Capacitances V, Voltage (V) Cob, Output Capacitance (pF) IC, Collector Current (A) VBE, Base Emitter Voltage (V) VR, Reverse Voltage (V) www.element14.com www.farnell.com www.newark.com Page <3> 11/06/12 V1.1 Darlington Power Transistors NPN Silicon Turn - off Time t, Time (s) t, Time (s) Turn - on Time IC, Collector Current (A) IC, Collector Current (A) Reverse Bias Switching Safe Operating Area IC, Collector Current (A) IC, Collector Current (A) Active Region Safe Operating Area VCE, Collector Emitter Voltage (V) VCE, Collector Emitter Voltage (V) Part Number Table Description Part Number Darlington Transistor, TO-3 MJ10005 Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <4> 11/06/12 V1.1