3
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Round Conductor Round Cable for CC-Link/LT
18 AWG Stranded, ETFE / PVC 79100 Series
• Designed for factory automation applications
• Conforms to CC-Link/LT
• Recommended for use with 3M™ Link Connectors
• 18 AWG [0.75 mm2] conductor wire permits IDC
termination
• RoHS Compliant. See the Regulatory Information
Appendix (RIA) in the “RoHS compliance” section
of www.3Mconnector.com for compliance
information. (RIA E1 & C1 apply)
Date Modied: July 22, 2010 TS-2325-C
Sheet 1 of 2
Physical
Jacket Material: Oil Resistant Polyvinyl Chloride (PVC) 1.0 mm nominal thickness
Color: Black
Insulator Material: ETFE (Fluorocarbon polymer)
Color: Black, Red, White, Green
Marking: 3M™ Cable 79100-075-4ZLT 0.75 mm2 x 4 for CC-Link/LT
3M™ Cable E42769-K AWM Style 20276 I A 80C 30V VW-1 FT1
Conductors:
Description: 0.75 mm2 [18 AWG], 7 strands x 0.08 mm [22 AWG], Tinned Stranded Copper
Mating Connectors: Link Connector, 38104-F018-F00 FL, 38104-B018-B0M FL, TS-2098
Electrical
Voltage Rating: UL: 30 V AWM: 30 V
Insulation Resistance: >1 x 1010 Ω / 10 ft [3 m]
Withstand Voltage: 1,500 V
AC for one minute
Unbalanced Tested Balanced Tested Balanced-Specication
Characteristic Impedance: 53.49 Ω 79.8 Ω@1MHz 90±30Ω @1MHz
79.1 Ω@5MHz 90±30Ω @5MHz
Capacitance: 106nF/km(32pF/ft)@1MHz 88.0nF/km(26.8pF/ft)@1kHz
Inductance: 0.09 uH/ft (0.30uH/m) 0.14 uH/ft (0.45uH/m)
Propagation Delay: 1.74 ns/ft (5.70ns/m) 1.74 ns/ft (5.70ns/m)
Velocity of Propagation: 58.52% 58.74%
Note: Unbalanced is measured between ground signal – ground conductors. Balanced is measured between conductors within a pair.
Environmental
Temperature Rating: 80°C Max
Flammability Rating: VW-1 (UL) FT1 (CSA)
UL File No. E42769-K
3
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Round Conductor Round Cable for CC-Link/LT
18 AWG Stranded, ETFE / PVC 79100 Series
TS-2325-C
Sheet 2 of 2
Ordering Information
79100 - 075 - 4ZLT
Insulated core wires
Tape
Jacket
0.27 [6.90] Ref.
0.075 ± 0.004 [1.9]
Filler
Product Dimensions
Note: Available in standard 200 meter rolls, please
specify length when ordering. Contact 3M for
availability of additional conductor counts and/or
custom roll lengths.
Inch [mm]
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
the legal theory asserted.
Please recycle. Printed in USA.
© 3M 2010. All rights reserved.
RIA-2217B-E
3M Electronics Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
1-800-225-5373
www.3Mconnector.com 3M is a trademark of 3M Company.
