Rev : 003 Product Family Data Sheet LC153A - COB(Chip On Board) LED Introduction Features 13W COB LED : 25.25 x 20.25 x 1.5 (mm) InGaN/GaN MQW LED with long-time reliability Lead (Pd) free product - RoHS compliant Applications Spot / Down light LED Retrofit Bulbs Outdoor illumination Other applications SAMSUNG ELECTRONICS 95, Samsung2-Ro, Giheung-Gu, Yongin-City, Gyeonggi-Do 446-711, KOREA Copyright (c) 2009-2011 SAMSUNG ELECTRONICS Co.,Ltd. All rights reserved. The information in this document is subject to change without notice. SAMSUNG, http://www.samsungled.com is a registered trademark of SAMSUNG ELECTRONICS. 1/19 Contents 1. Absolute Maximum Rating ----------------- 3 2. Characteristics ----------------- 3 3. Binning Structure ----------------- 5 4. Chromaticity Coordinates ----------------- 6 5. Typical Characteristics Graph ----------------- 7 6. Outline Drawing & Dimension ----------------- 10 7. Reliability Test Items and Conditions ----------------- 11 8. Label Structure ----------------- 12 9. Lot Number ----------------- 13 10. Tray Dimension ----------------- 14 11. Aluminum Bag Dimension ----------------- 14 12. Box & Pad Dimension ----------------- 15 13. Packing Structure ----------------- 16 14. Precaution for use ----------------- 18 15. Revision History ----------------- 19 http://www.samsungled.com 2/19 1. Absolute Maximum Rating 1) Operation Forward Current (Ta = 25C) ........................................................ 450 mA 2) Flash Mode Peak Pulsed Forward Current .................................................. 470 mA (Pulse width t 10msec, Duty ratio=0.06, Ta=25C) 3) Thermal Resistance ( Rth,j-c ) .......................................................................... 1.5C/W 4) LED Junction Temperature ( TJ ) ..................................................................... 150C 5) Operating Temperature Range ( Topr ) ............................................... -40C 85C 6) Storage Temperature Range ( Tstg ) ................................................. -40C 120C 2. Characteristics 1) Electro-Optical characteristics (Ta : 25C) Item Unit Condition Rank 3000K Luminous Flux2) lm V3) CRI View Angle5) Typ Max JB 950 - 1050 MA 1050 - MB 1050 - 1150 PA 1150 - - JC IF = 350 mA1) 5000K Forward Voltage Min MC IF = 350 mA YH 34 36.5 38.5 IF = 350 mA - 80 - - IF = 350 mA - - 115 - Note : 1) Samsung LED tested in pulsed condition. TJ=25C, pulse width is 10ms at rated test current. 2) Samsung LED has 10% tolerance of flux measurements. 3) Samsung LED has 5% tolerance of forward voltage measurements. 4) Samsung LED has 5% tolerance of CCT measurements. 5) Samsung LED tested in DC=350mA after Iuminous flux is saturated. 6) Samsung LED has 0.15 mm tolerance on device dimensions. http://www.samsungled.com 3/19 2) Current Sweep Characteristics If (mA) Vf (V) 60 32.45 100 150 200 250 300 350 400 450 Flux (Lm) Lm/W CRI Typ Typ Min 3000K 194 100 5000K 212 109 3000K 322 97 5000K 353 106 3000K 477 97 5000K 522 103 3000K 627 91 5000K 686 99 3000K 771 88 5000K 845 96 3000K 913 85 5000K 1000 93 3000K 1050 82 5000K 1150 90 3000K 1184 80 5000K 1296 87 3000K 1313 77 5000K 1438 85 CCT Typ 80 33.14 80 33.90 80 34.58 80 35.24 80 35.89 80 36.50 80 37.16 80 37.74 80 Note : 1) These values on the table are for reference only. http://www.samsungled.com 4/19 3. Binning Structure (Condition : IF = 350 mA, Ta : 25C) 1) Color Binning CCT Product Code SPHWWTHDNA45YHVTJC 3000K SPHWWTHDNA45YHVUJC SPHWWTHDNA45YHVPJC 5000K SPHCWTHDNA45YHRTMC Color Rank Chromaticity Bins VT VB, VC, VD, VE, (Whole Bin) VF, VG, VH VU VB, VC, VD (Half Bin) VP VB (Quarter Bin) RT RW, RX, RY, RZ (Whole Bin) 2) Luminous Flux Binning CCT Product Code Flux Flux Rank Bin SPHWWTHDNA45YHVTJC 3000K SPHWWTHDNA45YHVUJC SPHCWTHDNA45YHRTMC http://www.samsungled.com Min Typ Max JB 950 - 1050 MA 1050 - MB 1050 - 1150 PA 1150 - - JC SPHWWTHDNA45YHVPJC 5000K Range (lm) MC 5/19 4. Chromaticity Coordinates (Condition : IF = 350 mA, Ta : 25C) 1) 3000K Table VB VC VD VE CIE X CIE Y 0.4451 0.4146 0.4324 0.4100 0.4244 0.3922 0.4361 Table CIE X CIE Y 0.4562 0.4260 0.4431 0.4213 0.4388 0.4122 0.3964 0.4515 0.4168 0.4324 0.4100 0.4303 0.3944 0.4261 0.4077 0.4185 0.3902 0.4185 0.3902 0.4147 0.3814 0.4244 0.3922 0.4260 0.3854 0.4515 0.4168 0.4420 0.3985 0.4451 0.4146 0.4303 0.3944 0.4361 0.3964 0.4260 0.3854 0.4420 0.3985 0.4373 0.3893 0.4431 0.4213 0.4299 0.4165 0.4261 0.4077 0.4388 0.4122 VF VG VH 2) 5000K Table RW RX RY RZ CIE X 0.3376 0.3463 0.3451 0.3371 0.3371 0.3451 0.3440 0.3366 0.3463 0.3551 0.3533 0.3451 0.3451 0.3533 0.3515 0.3440 CIE Y 0.3616 0.3687 0.3554 0.3490 0.3490 0.3554 0.3428 0.3369 0.3687 0.3760 0.3620 0.3554 0.3554 0.3620 0.3487 0.3428 Note : 1) The Chromaticity Coordinates refers to ANSI C78.377-2008 http://www.samsungled.com 6/19 5. Typical Characteristics Graph * These graphs show typical values. (Ta : 25C) Forward Current vs. Relative Luminous Flux Forward Current vs. Forward Voltage Forward current vs. Chromaticity Coordination Temperature vs. Chromaticity Coordination http://www.samsungled.com 7/19 Temperature vs. Voltage Temperature vs. Relative Luminous Flux Radiation Pattern http://www.samsungled.com 8/19 Relative Spectral Emission <3000K> <5000K> Derating Curve http://www.samsungled.com 9/19 6. Outline Drawing & Dimension unit : mm Tolerance : 0.15 http://www.samsungled.com 10/19 7. Reliability Test Items and Conditions 1) Test Items Test Hours/Cycles Test Items Test Conditions MSL test MSL 2a(Sunnix5) 60C, 60%RH 120h(drying after 2h) 260C 10sec 3time(each Cycle 1 time Room Temperature life test 25C, IF = Max 1,000 h High Temperature humidity life test 85C, 85% RH, DC Derating IF = Max 1,000 h High Temperature life test 85C, DC Derating IF = Max 1,000 h 125C 24h drying Room Temperature cooling, MSL after 15min during 4 h) Low Temperature life test -40C, DC 450 mA 1,000 h High Temperature Storage 120C 1,000 h Low Temperature Storage -40C 1,000 h Thermal Shock -45C/15min 125C/15min Temperature changes in 5min. 200 cycles Temperature Cycle On/Off test -40 / 85C, each 20min, 100min transfer Power On/off each 5min, DC 350 mA 100 cycles 25C, 95%RH 85C, 95%RH[24h/1Cycle] R1 : 10 , R2 : 1.5 , C : 100 R1 : 10 , R2 : 0 , C : 200 20~80(Displacement:0.06inch, Max 20G) 80~2 (Max 20G) Min. Frequency Max. Frequency 4min transfer Temperature humidity Cycle Storage -10C ESD(HBM) ESD(MM) Vibration Shock 1500G, 0.5ms, Every 6faces (3axis X 2faces) Salt Spray 35C, salt water 5% 8h spray 16h leaving alone 100 cycles 5 times ) ( 5 5 times ( 0.5 ) 4 times 5 times 2 cycles 2) Criteria for Failure Limit Item Symbol Test Condition [Ta = 25C] Min. Max. Forward Voltage VF 350 mA L.S.L. x 0.9 U.S.L. x 1.1 Luminous flux lm 350 mA L.S.L. x 0.7 U.S.L. x 1.3 * U.S.L. : Upper Standard Level http://www.samsungled.com L.S.L. : Lower Standard Level 11/19 8. Label Structure * Bag & Inner box YHRTMC SPHCWTHDNA45YHRTMC YHRTMC 01 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII / I / * Box YHRTMC Rank SPHCWTHDNA45YHRTMC Code YHRTMC 01 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII / I / XXX PCS XXX PCS IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII Lot number IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII OEB1906001/50 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII OEB1906002/50 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII OEB1906001/50 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII OEB1906002/50 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII OEB1906003/50 Tray number /Q'ty IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII OEB1906004/50 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII OEB1906003/50 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII OEB1906004/50 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII OEB1906005/50 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII OEB1906005/50 [Box Label] N.B) Denoted rank is the only example. Rank Code : Forward Voltage (V ) Rank (refer to page. 3) : Chromaticity Coordinate Rank (refer to page. 5) : Luminous Flux ( ) Rank (refer to page. 3) F V http://www.samsungled.com 12/19 9. Lot Number The Lot number is composed of the following characters / I / xxx PCS : Production Site (S:SAMSUNG ELECTRONICS, G:Gosin China, A:Aprosystems) : L (LED) : Product State (A:Normality, B: Bulk, C:First Production, R:reproduction, S:Sample) : Year (S:2008, T:2009, U:2010, V:2011...) : Month (1 ~ 9, A~C) : Day (1 ~ 9, A, B ~ V) : SAMSUNG LED Product number (1 ~ 999) : Tray Number (1 ~ 999) http://www.samsungled.com 13/19 10. Tray Dimension 11. Aluminum Bag Dimension Silica gel & Humidity Indicator Card in Aluminum Bag http://www.samsungled.com 14/19 12. Box & Pad Dimension 1) Out BOX 2) Inner BOX 3) Pe-foam PAD http://www.samsungled.com 15/19 13. Packing Structure 1-1). Tray Packing (When 5 Trays) Max Amount(pcs) Tray Al Bag Box 40 200 800 http://www.samsungled.com 16/19 1-2). Tray Packing (When Less than 5 Trays) EX) Module tray 2pcs : Pe-foam(10t) * 3pcs Module tray 3pcs : Pe-foam(10t) * 2pcs Module tray 4pcs : Pe-foam(10t) * 1pcs http://www.samsungled.com 17/19 14. Precaution for use 1) Shelf life in sealed bag : 12 months at < 40C and < 90% relative humidity(RH) 2) Peak package body temperature : 240C. 3) After this bag is opened, devices that will be subjected to reflow solder or other high temperature processes must be : a. Mounted within 672 hours at factory conditions of equal to or less than 30C / 60% RH, or b. Stored at < 10% RH 4) Devices require bake, before mounting, if : a. Humidity Indicator Card is > 65% when read at 23 5C, or b. 2a is not met. 5) If baking is required, devices must be baked for 1 hours at 60 5C Note : If device containers cannot be subjected to high temperature or shorter bake times are desired, reference IPC / JEDEC J-STD-033 for bake procedure. 6) The LEDs are sensitive to the static electricity and surge current. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. If voltage exceeding the absolute maximum rating is applied to LEDs, it may cause damage or even destruction to LED devices. Damaged LEDs may show some unusual characteristics such as increase in leakage current, lowered turn-on voltage, or abnormal lighting of LEDs at low current. 7) Please do not following behavior in resin area. (Handling, Pressing, Touching, Rubbing, Contacting tweezers, Cleaning) But it's ok in handling area. http://www.samsungled.com 18/19 Revision History Date Revision History 2012.02.17 Writer Drawn Approved New Version SH.AN HK.KIM 2012.03.29 1st Version SH.AN HK.KIM 2012.11.26 2st Version SH.AN HK.KIM http://www.samsungled.com 19/19