TGL41-6.8 thru TGL41-200A Surface Mount TRANSZORB(R) Transient Voltage Suppressors Breakdown Voltage 6.8 to 200V Peak Pulse Power 400W DO-213AB (GL41) SOLDERABLE ENDS 1st BAND 0 D2 = D1 + - 0.008 (0.20) Mounting Pad Layout D2 D1= 0.105 0.095 (2.67) (2.41) 0.157 (4.00) MAX 0.049 (1.25) MIN 0.118 (3.00) MIN 0.022 (0.56) 0.018 (0.46) 0.022 (0.56) 0.018 (0.46) 0.205 (5.2) 0.185(4.7) 1st band denotes type and positive end (cathode) 0.256 (6.50) REF Dimensions in inches and (millimeters) Mechanical Data Features Case: JEDEC DO-213AB molded plastic body over passivated junction Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 High temperature soldering guaranteed: 250C/10 seconds at terminals Polarity: Blue bands denotes the cathode which is positive with respect to the anode under normal TVS operation Mounting Position: Any Weight: 0.166 gram, 0.0046 ounce Packaging codes/options: 26/5K per 13" Reel (12mm tape), 60K/box 46/1.5K per 7" Reel (12mm tape), 30K/box * Plastic package has Underwriters Laboratory Flammability Classificaion 94V-0 * For surface mounted applications * Glass passivated junction * Excellent clamping capability * Low incremental surge resistance * Very fast response time * 400W peak pulse capability with a 10/1000s waveform, repetition rate (duty cycle): 0.01% (200W above 91V) * For devices with V(BR)10V, ID are typically less than 1.0A * High temperature soldering guaranteed: 250C/10 seconds at terminals * Available in unidirectional only Maximum Ratings & Thermal Characteristics Ratings at 25C ambient temperature unless otherwise specified. Parameter Symbol Value Unit PPPM Minimum 400 W PM(AV) 1.0 W IPPM See Next Table A IFSM 40 A Maximum instantaneous forward voltage at 25A for unidirectional only VF 3.5 V Operating junction and storage temperature range TJ, TSTG -55 to +150 C Peak pulse power dissipation with a 10/1000s waveform (1)(Fig. 1) Steady state power dissipation at TL = 75C (2) Peak pulse current with a 10/1000s waveform (1) (Fig. 3) Peak forward surge current, 8.3 ms single half sine-wave unidirectional only(3) Notes: (1) Non-repetitive current pulse, per Fig.3 and derated above TA = 25C per Fig. 2. Rating is 200W above 91V. (2) Mounted on copper pads to each terminal of 0.31 in2 (8.0 mm2) per Fig. 5 (3) Measured at 8.3ms single half sine-wave or equivalent square wave duty cycle = 4 pulses per minute maximum 2/12/01 TGL41-6.8 thru TGL41-200A Surface Mount TRANSZORB(R) Transient Voltage Suppressors Electrical Characteristics (T Breakdown Voltage VBR (V)(1) Device Type TGL41-6.8 TGL41-6.8A TGL41-7.5 TGL41-7.5A TGL41-8.2 TGL41-8.2A TGL41-9.1 TGL41-9.1A TGL41 -10 TGL41 -10A TGL41 -11 TGL41 -11A TGL41-12 TGL41-12A TGL41-13 TGL41-13A TGL41-15 TGL41-15A TGL41-16 TGL41-16A TGL41-18 TGL41-18A TGL41-20 TGL41-20A TGL41-22 TGL41-22A TGL41-24 TGL41-24A TGL41-27 TGL41-27A TGL41-30 TGL41-30A TGL41-33 TGL41-33A TGL41-36 TGL41-36A TGL41-39 TGL41-39A TGL41-43 TGL41-43A Min Max Test Current at IT (mA) 6.12 6.45 6.75 7.13 7.38 7.79 8.19 8.65 9.00 9.50 9.90 10.5 10.8 11.4 11.7 12.4 13.5 14.3 14.4 15.2 16.2 17.1 18.0 19.0 19.8 20.9 21.6 22.8 24.3 25.7 27.0 28.5 29.7 31.4 32.4 34.2 35.1 37.1 38.7 40.9 7.48 7.14 8.25 7.88 9.02 8.61 10.0 9.55 11.0 10.5 12.1 11.6 13.2 12.6 14.3 13.7 16.5 15.8 17.6 16.8 19.8 18.9 22.0 21.0 24.2 23.1 26.4 25.2 29.7 28.4 33.0 31.5 36.3 34.7 39.6 37.8 42.9 41.0 47.3 45.2 10 10 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 A = 25C unless otherwise noted) Stand-off Voltage VWM (V) 5.50 5.80 6.05 6.40 6.63 7.02 7.37 7.78 8.10 8.55 8.92 9.40 9.72 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 Maximum Reverse Leakage at VWM ID (A) Maximum Peak Pulse Current IPPM (A)(2) 1000 1000 500 500 200 200 50.0 50.0 10.0 10.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 37.0 38.1 34.2 35.4 32.0 33.1 29.0 29.9 26.7 27.6 24.7 25.6 23.1 24.0 21.1 22.0 18.2 18.9 17.0 17.8 15.1 15.9 13.7 14.4 12.5 13.1 11.5 12.0 10.2 10.7 9.2 9.7 8.4 8.8 7.7 8.0 7.1 7.4 6.5 6.7 Maximum Maximum Clamping Voltage Temperature at IPPM Coefficient VC (V) of VBR (% / C) 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15.0 14.5 16.2 15.6 17.3 16.7 19.0 18.2 22.0 21.2 23.5 22.5 26.5 25.2 29.1 27.7 31.9 30.6 34.7 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52.0 49.9 56.4 53.9 61.9 59.3 0.060 0.060 0.064 0.064 0.068 0.068 0.071 0.071 0.076 0.076 0.078 0.078 0.081 0.081 0.084 0.084 0.087 0.087 0.089 0.089 0.091 0.091 0.093 0.093 0.095 0.095 0.097 0.097 0.099 0.099 0.100 0.100 0.101 0.101 0.102 0.102 0.103 0.103 0.104 0.104 TGL41-6.8 thru TGL41-200A Surface Mount TRANSZORB(R) Transient Voltage Suppressors Electrical Characteristics (T Breakdown Voltage VBR (V)(1) Device Type TGL41-47 TGL41-47A TGL41-51 TGL41-51A TGL41-56 TGL41-56A TGL41-62 TGL41-62A TGL41-68 TGL41-68A TGL41-75 TGL41-75A TGL41-82 TGL41-82A TGL41-91 TGL41-91A TGL41-100 TGL41-100A TGL41-110 TGL41-110A TGL41-120 TGL41-120A TGL41-130 TGL41-130A TGL41-150 TGL41-150A TGL41-160 TGL41-160A TGL41-170 TGL41-170A TGL41-180 TGL41-180A TGL41-200 TGL41-200A Min Max Test Current at IT (mA) 42.3 44.7 45.9 48.5 50.4 53.2 55.8 58.9 61.2 64.6 67.5 71.3 73.8 77.9 81.9 86.5 90.0 95.0 99.0 105.0 108.0 114.0 117.0 124.0 135.0 143.0 144.0 152.0 153.0 162.0 162.0 171.0 180.0 190.0 51.7 49.4 56.1 53.6 61.6 58.8 68.2 65.1 74.8 71.4 82.5 78.8 90.2 86.1 100.0 95.50 110.0 105.0 121.0 116.0 132.0 126.0 143.0 137.0 165.0 158.0 176.0 168.0 187.0 179.0 198.0 189.0 220.0 210.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 A = 25C unless otherwise noted) Stand-off Voltage VWM (V) 38.1 40.2 41.3 43.6 45.4 47.8 50.2 53.0 55.1 58.1 60.7 64.1 66.4 70.1 73.7 77.8 81.0 85.5 89.2 94.0 97.2 102.0 105.0 111.0 121.0 128.0 130.0 136.0 138.0 145.0 146.0 154.0 162.0 171.0 Maximum Reverse Leakage at VWM ID (A) Maximum Peak Pulse Current IPPM (A)(2) 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.9 6.2 5.4 5.7 5.0 5.2 4.5 4.7 4.1 4.3 3.7 3.9 3.4 3.5 3.1 3.2 1.39 1.46 1.27 1.32 1.16 1.21 1.07 1.12 0.93 0.97 0.87 0.91 0.82 0.85 0.78 0.81 0.70 0.73 Notes: (1) V(BR) measured after IT applied for 300s square wave pulse or equivalent (2) Surge current waveform per Figure 3 and derate per Fig.2 (3) All terms and symbols are consistent with ANSI/IEEE C62.35 Maximum Maximum Clamping Voltage Temperature at IPPM Coefficient VC (V) of VBR (% / C) 67.8 64.8 73.5 70.1 80.5 77.0 89.0 85.0 98.0 92.0 108 103 118 113 131 125 144 137 158 152 173 165 187 179 215 207 230 219 244 234 258 246 287 274 0.104 0.104 0.105 0.105 0.106 0.106 0.107 0.107 0.107 0.107 0.108 0.108 0.108 0.108 0.109 0.109 0.109 0.109 0.110 0.110 0.110 0.110 0.110 0.110 0.111 0.111 0.111 0.111 0.111 0.111 0.111 0.111 0.111 0.111 TGL41-6.8 thru TGL41-200A Ratings and Characteristic Curves (T Surface Mount TRANSZORB(R) Transient Voltage Suppressors A = 25C unless otherwise noted) Peak Pulse Power (PPPM) or Current (IPPM) derating in percentage (%) Fig. 1 - Peak Pulse Power Rating Curve PPPM, Peak Pulse Power (kW) 100 Non-Repetitive Pulse Waveform shown in Fig. 3 TA = 25C 10 TGL41-6.8 TGL91A 1.0 TGL41-100 TGL200A 0.1 0.1s 1.0s 10s 100s 1.0ms 10ms Fig. 2 - Pulse Derating Curve 100 75 50 25 0 0 td, Pulse Width, sec. CJ, Junction Capacitance (pF) 100 Half Value -- IPP 2 IPPM 50 10/1000sec. Waveform as defined by R.E.A. td 0 150 Measured at Zero Bias 1,000 Measured at Stand-off Voltage, VWM 100 TJ = 25C f = 1.0 MHz Vsq = 50MVpp Unidirectional 10 1.0 0 3.0 2.0 4.0 1.0 100 200 V(BR), Breakdown Voltage (V) Fig. 5 - Steady State Power Derating Curve Fig. 6 - Maximum Non-Repetitive Peak Forward Surge Current Unidirectional only 60 Hz Resistive or Inductive Load 0.75 0.50 0.25 0.31 x 0.31 x 0.08" Copper pads (8 x 8 x 2mm) 0 0 10 t -- Time (ms) 1.00 PM(AV), Steady State Power Dissipation (W) 125 Fig. 4 - Typical Junction Capacitance IFSM, Peak Forward Surge Current (A) IPPM -- Peak Pulse Current, % IRSM Peak Value IPPM 100 10,000 TJ = 25C Pulse Width (td) is defined as the point where the peak current decays to 50% of IPPM tr = 10sec. 75 50 TA, Ambient Temperature (C) Fig. 3 - Pulse Waveform 150 25 25 50 75 100 125 150 TL, Lead Temperature (C) 175 200 50 8.3ms single half sine-wave (JEDEC method) TJ = TJ max. 40 30 20 10 0 1 10 Number of Cycles at 60 Hz 100