2SC5610 - Sanyo Semiconductor - Datasheet.Directory

Any and all SANYO products described or contained herein do not have specifications that can handle

applications that require extremely high levels of reliability, such as life-support systems, aircraft’s

control systems, or other applications whose failure can be reasonably expected to result in serious

physical and/or material damage. Consult with your SANYO representative nearest you before using

any SANYO products described or contained herein in such applications.

SANYO assumes no responsibility for equipment failures that result from using products at values that

exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other

parameters) listed in products specifications of any and all SANYO products described or contained

herein.

PNP/NPN Epitaxial Planar Silicon Transistors

DC/DC Converter Applications

Ordering number:ENN6367

2SA2022/2SC5610

SANYO Electric Co.,Ltd. Semiconductor Company

TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN

21000TS (KOTO) TA-2470 No.6367–1/5

Package Dimensions

unit:mm

2041A

[2SA2022/2SC5610]

˚C

Electrical Characteristics at Ta = 25˚C

1 : Base

2 : Collector

3 : Emitter

SANYO : TO220ML

Applications

· Relay drivers, lamp drivers, motor drivers, strobes.

Features

· Adoption of MBIT processes.

· Large current capacitance.

· Low collector-to-emitter saturation voltage.

· High-speed switching.

· High allowable power dissipation.

Specifications

( ) : 2SA2022

Absolute Maximum Ratings at Ta = 25˚C

Continued on next page.

retemaraPlobmySsnoitidnoCsgnitaRtinU

egatloVesaB-ot-rotcelloCV

OBC 06)05–(V

egatloVrettimE-ot-rotcelloCV

OEC 05)–(V

egatloVesaB-ot-rettimEV

OBE 6)–(V

tnerruCrotcelloCI

C7)–(A

)esluP(tnerruCrotcelloCI

PC 01)–(A

tnerruCesaBI

B2.1)–(A

noitapissiDrotcelloCP

C2W

81W

erutarepmeTnoitcnuJjT 051

erutarepmeTegarotSgtsT 051+ot55–

Tc=25˚C

retemaraPlobmySsnoitidnoC sgnitaR tinU

nimpytxam

tnerruCffotuCrotcelloCI

OBC VBC I,V04)–(= E0=1.0)–(Aµ

tnerruCffotuCrettimEI

OBE VBE I,V4)–(= C0=1.0)–(Aµ

niaGtnerruCCDh

EF VEC I,V2)–(= CA1)–(=051003

tcudorPhtdiwdnaB-niaGf

TVEC I,V01)–(= CAm005)–(= )092(zHM

033zHM

ecnaticapaCtuptuOboCV

BC zHM1=f,V01)–(= 82)05(Fp

1.6

1.2

0.75

14.0 16.0

10.0

18.1

5.6

3.2

7.2

3.5

2.55

2.4

4.5

2.8

0.7

2.55

2.4

123

2SA2022/2SC5610

No.6367–2/5

Continued on preceding page.

Switching Time T est Circuit

50Ω

INPUT OUTPUT

VRRBRL

VCC=20V

100µF470µF

VBE=--5V

PW=20µsIB1

IB2

D.C.≤1%

10IB1= --10IB2= IC=2A

(For PNP, the polarity is reversed.)

--7

--6

--5

--4

--3

--2

--1

00 --0.4 --0.8 --1.2 --1.6 --2.0

IC -- VCE

--10mA

--5mA

--20mA

40mA

--60mA

--80mA

--180mA

--160mA

--200mA

IB=0

2SA2022

IT01345

--7

--6

--5

--4

--3

--2

--1

00 --0.2 --0.4 --0.6 --0.8 --1.2--1.0

IC -- VBE

IT01346

Ta=75°C

25°C

--25°C

2SA2022

VCE=--2V

--140mA

--120mA

--100mA 7

00 0.4 0.8 1.2 1.6 2.0

IC -- VCE

5mA

10mA

20mA

60mA

40mA

80mA

100mA

IB=0

2SC5610

IT01353

200mA

120mA

180mA

140mA

160mA

00 0.2 0.4 0.6 0.8 1.21.0

IC -- VBE

IT01354

Ta=75°C

2SC5610

VCE=2V

25°C

--25°C

Collector Current, IC–A

Collector-to-Emitter Voltage, VCE –V

Collector Current, IC–A

Collector-to-Emitter Voltage, VCE –V

Base-to-Emitter Voltage, VBE –V

Collector Current, IC–A

Base-to-Emitter Voltage, VBE –V

retemaraPlobmySsnoitidnoC sgnitaR tinU

nimpytxam

egatloVnoitarutaSrettimE-ot-rotcelloCV

EC )tas(I

CI,A5.2)–(= BAm521)–(= )051–()003–(Vm

031062Vm

egatloVnoitarutaSrettimE-ot-esaBV

EB )tas(I

CI,A5.2)–(= BAm521)–(=58.0)–(2.1)–(V

egatloVnwodkaerBesaB-ot-rotcelloCV

OBC)RB( ICI,Aµ01)–(= E0= )05–(V

06V

egatloVnwodkaerBrettimE-ot-rotcelloCV

OEC)RB( ICR,Am1)–(= EB =∞05)–(V

egatloVnwodkaerBesaB-ot-rettimEV

OBE)RB( IEI,Aµ01)–(= C0=6)–(V

emiTNO-nruTt

no tiucriCtseTdeificepseeS 03sn

emiTegarotSt

gts tiucriCtseTdeificepseeS )052( sn

003 sn

emiTllaFt

ftiucriCtseTdeificepseeS 51sn

2SA2022/2SC5610

No.6367–3/5

1.0

0.1

0.01

0.01 0.1

23 57 23 57 23 57

1.0 10

VCE(sat) -- IC

IT01357

Ta=75°C

25°C

--25°C

2SC5610

IC / IB=50

VBE(sat) -- IC

1.0

0.1

0.01 0.1 1.0 10

Ta=--25°C

25°C

75°C

23 57 23 57 23 57

2SC5610

IC / IB=20

IT01358

1000

100

0.01 0.1

23 57 23 57 23 57

1.0 10

VCE(sat) -- IC

IT01356

Ta=75°C

25°C

--25

°C

2SC5610

IC / IB=20

--1000

--100

--10

--0.01 --0.1

23 57 23 57 23 57

--1.0 --10

VCE(sat) -- IC

IT01348

Ta=75°C

25°C

--25°C

2SA2022

IC / IB=20

--10

--1.0

--0.1

--0.01

--0.01 --0.1

23 57 23 57 23 57

--1.0 --10

VCE(sat) -- IC

IT01349

Ta=75°C

25°C

--25°C

2SA2022

IC / IB=50

VBE(sat) -- IC

--10

--1.0

--0.1

--0.01 --0.1 --1.0 --10

Ta=--25°C

25°C

75°C

23 57 23 57 23 57

2SA2022

IC / IB=20

IT01350

1000

100

--0.01 325 --10--0.1

73257 3257

--1.0

hFE -- IC

IT01347

Ta=75°C

25°C

--25°C

2SA2022

VCE=--2V

1000

100

0.01 325 100.1

73257 3257

1.0

hFE -- IC

IT01355

Ta=75°C25°C

--25°C

2SC5610

VCE=2V

DC Current Gain, hFE

Collector Current, IC–A

DC Current Gain, hFE

Collector Current, IC–A

Collector-to-Emitter

Saturation Voltage, VCE(sat) – mV

Collector Current, IC–A

Collector-to-Emitter

Saturation Voltage, VCE(sat) – mV

Collector Current, IC–A

Collector-to-Emitter

Saturation Voltage, VCE(sat) – V

Collector Current, IC–A

Base-to-Emitter

Saturation Voltage, VBE(sat) – V

Collector Current, IC–A

Base-to-Emitter

Saturation Voltage, VBE(sat) – V

Collector Current, IC–A

Collector-to-Emitter

Saturation Voltage, VCE(sat) – V

2SA2022/2SC5610

No.6367–4/5

A S O

ICP

100ms 10

µs

DC operation

10ms

1ms

500µs

100µs

1.8

2.0

1.6

1.4

2.2

1.0

0.8

0.6

0.4

0.2

1.2

2006040 80 100 140120 160

PC -- Ta

2SA2022 / 2SC5610

IT01362

1.0

0.1

1.0 10 100

2537 2 5372537

IT01361

fT -- IC

100

1000

IT01360

2SC5610

VCE=2V

fT -- IC

100

1000

--0.01 25757 3 2 573253

--0.1 --1.0 0.01 25757 3 2 573253

0.1 1.0

IT01352

2SA2022

VCE=--2V

Cob -- VCB

100

--1.0

23 57 23 5 23 57

--1.0 --10 IT01351

2SA2022

f=1MHz

100

1.0 23 57

10 2

IT01359

2SC5610

f=1MHz

Cob -- VCB

2006040 80 100 140120 160

PC -- Tc

2SA2022 / 2SC5610

IT01870

Gain-Bandwidth Product, fT– MHz

Collector Current, IC–A

Output Capacitance, Cob – pF

Collector-to-Base Voltage, VCB -- V

Output Capacitance, Cob – pF

Collector-to-Base Voltage, VCB -- V

Gain-Bandwidth Product, fT– MHz

Collector Current, IC–A

Collector-to-Emitter Voltage, VCE –V

Collector Dissipation, P

–W

Ambient Temperature, Ta – ˚C

No heat sink

Collector Dissipation, P

–W

Case Temperature, Tc – ˚C

2SA2022 / 2SC5610

Tc=25°C

Single pulse

For PNP, the minus sign (–) is omitted

Specifications of any and all SANYO products described or contained herein stipulate the performance,

characteristics, and functions of the described products in the independent state, and are not guarantees

of the performance, characteristics, and functions of the described products as mounted in the customer's

products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,

the customer should always evaluate and test devices mounted in the customer's products or equipment.

SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all

semiconductor products fail with some probability. It is possible that these probabilistic failures could

give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,

or that could cause damage to other property. When designing equipment, adopt safety measures so

that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective

circuits and error prevention circuits for safe design, redundant design, and structural design.

In the event that any or all SANYO products(including technical data,services) described or

contained herein are controlled under any of applicable local export control laws and regulations,

such products must not be exported without obtaining the export license from the authorities

concerned in accordance with the above law.

No part of this publication may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying and recording, or any information storage or retrieval system,

or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.

Any and all information described or contained herein are subject to change without notice due to

product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"

for the SANYO product that you intend to use.

Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not

guaranteed for volume production. SANYO believes information herein is accurate and reliable, but

no guarantees are made or implied regarding its use or any infringements of intellectual property rights

or other rights of third parties.

This catalog provides information as of February, 2000. Specifications and information herein are subject

to change without notice.

2SA2022/2SC5610

PS No.6367–5/5