Vectron International, 267 Lowell Road, Hudson, NH 03051 Tel: 1-88-VECTRON-1 • Web: www.vectron.com
Page 1 of 9 Rev: 01Apr2010
VS-505
Single Frequency VCSO
Features
• Industry Standard Package, 9.1 x 13.8 x 3.7 mm
• 5
th Generation ASIC Technology for Ultra Low Jitter
120 fs-rms (fN = 622.08 MHz, 12 kHz to 20 MHz)
105 fs-rms (fN = 622.08 MHz, 50 kHz to 80 MHz)
• Output Frequencies from 122.88 MHz to 1.00 GHz
• Spurious Suppression, 90 dBc Typical
• 2.5V or 3.3V Supply Voltage
• LVPECL or LVDS Output Configurations
• Tri-State Output Select (OD, OS, OE)
• Compliant to EC RoHS Directive
Applications
PLL circuits for Clock Smoothing and Frequency Translation
Description
• SONET / SDH
• OTN (Optical Transport Network)
• 10 GbE (Gigabit Ethernet)
• 10 GFC (Gigabit Fibre Channel)
• 40 GbE & 100 GbE
• Synchronous Ethernet
• WiMax
Standard
GR-253-CORE
ITU-T G.709/Y.1331
IEEE 802.3ae
INCITS 364-2003
IEEE 802.3ba
ITU-T G.8261
IEEE 802.16
Vcc COutput Output
GndOSelectVc
SAW
X=1,2,4
LVPECL
LVDS
1
X
Description
The VS-505 is a Voltage Controlled SAW Oscillator that
operates at the fundamental frequency of the internal SAW
filter. The SAW filter is a high-Q Quartz device that enables the
circuit to achieve low phase jitter performance over a wide
operating temperature range. A divider circuit is deployed for
output frequencies less than 491.52 MHz. The oscillator is
housed in a hermetically sealed leadless surface mount
package and offered on tape and reel. It has a tri-state Output
Select function that provides one of three conditions: Output
Disable, Output Set, or Output Enable.
Pb
VS-505 Single Frequency VCSO
Vectron International, 267 Lowell Road, Hudson, NH 03051 Tel: 1-88-VECTRON-1 • Web: www.vectron.com
Page 2 of 9 Rev: 01Apr2010
Electrical Performance: 3.3V LV-PECL
Parameter Symbol Minimum Typical Maximum Units Notes
Frequency
Nominal Frequency fN 120 1000 MHz 1,2,3
Absolute Pull Range APR ±50 ppm 1,2,3,9
Linearity Lin
±7 % 2,4,9
Gain Transfer (Standard) KV +445 ppm/V 2,9
Temperature Stability fSTAB ±100 ppm 1,7
Supply
Voltage (± 10%) VCC 2.97 3.3 3.63 V 2,3
Current (Typical 50Ω Load) ICC 73 mA 3
Current (No Load) ICC 60 75 mA 3
Outputs
Mid Level VCC-1.5 VCC-1.3 VCC-1.1 mV 2,3
Single Ended Swing 750 mV-pp 2,3
Differential Swing 1.5 V-pp 2,3
Current IOUT 20 mA 7
Rise Time tR 180 250 ps-pp 6,7
Fall Time tF 180 250 ps-pp 6,7
Symmetry SYM 45 50 55 % 2,3
Spurious Suppression 85 90 dBc 7
Jitter (>491.52 MHz to <1000.0 MHz) φJ 150 fs-rms 7,8
Jitter (>245.76 MHz to <491.52 MHz) φJ 190 fs-rms 7,8
Jitter (>122.88 MHz to <245.76 MHz) φJ 280 fs-rms 7,8
Control Voltage
Input Impedance (Output Enabled) ZC 130
kΩ 7
Input Impedance (Output Disabled) ZC 472
kΩ 7
Modulation Bandwidth BW 200 kHz 7
Operating Temperature TOP -40 +85 °C 1,3
Package Size 9.1 x 13.8 x 3.7 mm
1. See Standard Frequencies and Ordering Information (Pg 8).
2. Parameters are tested with production test circuit (Pg 3).
3. Parameters are tested at ambient temperature with test limits guard-banded for specified operating temperature.
4. Measured as the maximum deviation from the best straight-line fit, per MIL-0-55310.
5. The Vc Model is described below (Fig 1).
6. Parameters are described with waveform diagram below (Fig 2).
7. Not tested in production, guaranteed by design, verified at qualification.
8. For Frequencies >491.52 MHz, Jitter is Integrated across 50 kHz to 80 MHz.
For Frequencies <491.52 MHz, Jitter is Integrated across 12 kHz to 20 MHz. (Both per GR-253-CORE Issue3).
9. Tested with Vc = 0.3V to 3.0V.
Figure 1. Vc Model – Output Enabled
Figure 2. 10K LV-PECL Waveform
+
-
t
A
tB
tRtF
80%
20%
Vcc-1.5V
Vcc-1.3V
Vcc-1.1V
Vcc=+2V
SYM = 100 x t
A
/ tB
Vc
123kΩ
1.65V
47pF
6.8kΩ
VS-505 Single Frequency VCSO
Vectron International, 267 Lowell Road, Hudson, NH 03051 Tel: 1-88-VECTRON-1 • Web: www.vectron.com
Page 3 of 9 Rev: 01Apr2010
Absolute Maximum Ratings
Parameter Symbol Ratings Unit
Power Supply VCC 0 to 6 V
Input Current IIN 100 mA
Output Current IOUT 25 mA
Voltage Control Range VC 0 to VCC V
Output Select OSelect 0 to VCC V
Storage Temperature TSTR -55 to 125 °C
Soldering Temperature / Duration TPEAK / t P 260 / 40 °C / sec
Stresses in excess of the absolute maximum ratings can permanently damage the device. Also, exposure to
these absolute maximum ratings for extended periods may adversely affect device reliability. Functional
operation is not implied at these or any other conditions in excess of those represented in the operational
sections of this datasheet. Permanent damage is also possible if any device input (Vc or OS) draws >100 mA.
Test Circuits & Output Load Configurations
43
240Ω
0.01 μF
16
2
Gnd
OSelect 5
Vc
0.10 μF
+3.3V
240Ω
100Ω
Z = 50Ω
Z = 50Ω
COutput
Vcc
Output
Gnd
Vc
OSelect
Output
240Ω
34
240Ω
COutput
2
1
5
6Vcc
COutput
Output
43
25
Vc 16
Vcc
LV-PECL to LV-PECL: For short transmission lengths, the pull
down resistor values shown provide reasonable power
consumption and waveform performance.
Functional Test: Allows use of standard power supply biasing
configuration. Pull down resistors are used for LV-PECL outputs
and are removed for with LVDS outputs. Since the LVDS outputs
are AC coupled, the output DC levels cannot be measured.
LVDS to LVDS: The 100Ω resistor should be removed if this load is
provided internally within the LVDS receiver.
Gnd 3Output
4Z = 50Ω
COutputOSelect
Vc
2
1
5
Vcc
6
Z = 50Ω
Production Test: DC levels shown for Vee, OSelect,
& Vc are for devices configured for 3.3V operation.
LV-PECL outputs are DC coupled to 50Ω test
equipment. LVDS outputs are connected to a digital volt meter, then AC
coupled to the test equipment. The digitial volt meter allows for Mid Level &
Swing measurements.
0.01 μF
0.01 μF
100Ω
-1.3V
+
-
+
-OSelect
Vee
10KΩ10KΩ
0.01 μF
0.01 μF
DMV
Vee
V
Vc (-3.00V to -0.30V)
OSelect M (-1.90V to -1.40V)
H (-0.55V to 0.00V)
L (-3.30V to -2.75V)
0.01 μF
0.10 μF
+3.3V
0.01 μF
0.10 μF
+2.0V
0.01 μF
0.10 μF
+3.3V
Or
VS-505 Single Frequency VCSO
Vectron International, 267 Lowell Road, Hudson, NH 03051 Tel: 1-88-VECTRON-1 • Web: www.vectron.com
Page 4 of 9 Rev: 01Apr2010
Typical Characteristics: Vc Pull & Vc Pull Linearity
-700
-600
-500
-400
-300
-200
-100
0
100
200
300
400
500
600
700
800
900
0.00 0.30 0.60 0.90 1.20 1.50 1.80 2.10 2.40 2.70 3.00 3.30
Control Voltage (V)
Frequency (ppm)
850.00
622.08
491.52
425.00
311.04
245.76
212.50
155.52
122.88
Kv = 459 ppm/V
Kv = 443 ppm/V
Kv = 458 ppm/V
TPull = 1240 ppm
TPull = 1150 ppm
TPull = 1258 ppm
Vc Pull
-10%
-8%
-6%
-4%
-2%
0%
2%
4%
6%
8%
10%
0.30 0.60 0.90 1.20 1.50 1.80 2.10 2.40 2.70 3.00
Control Voltage (V)
Vc Linearity (%)
850.00
622.08
491.52
425.00
311.04
245.76
212.50
155.52
122.88
Max
(
0.3V to 3.0V
)
= 3.32%
Min
(
0.3V to 3.0V
)
= -6.19%
Vc Pull Linearity
VS-505 Single Frequency VCSO
Vectron International, 267 Lowell Road, Hudson, NH 03051 Tel: 1-88-VECTRON-1 • Web: www.vectron.com
Page 5 of 9 Rev: 01Apr2010
Typical Characteristics: Phase Noise & Jitter
-160
-150
-140
-130
-120
-110
-100
-90
-80
-70
-60
-50
-40
-30
-20
10 100 1,000 10,000 100,000 1,000,000 10,000,000 100,000,000
Offset (Hz)
L(f) (dBc/Hz)
850.00
622.08
491.52
425.00
311.04
245.76
212.50
155.52
122.88
12K - 20M
50K - 80M
Jitter (fs-rms) Agilent E5052B
Frequency 12K-20M 50K-40M 50K-80M
850.00 104.7 67.3 83.7
622.08 116.3 79.0 100.5
491.25 128.8 106.3 140.6
425.00 142.9 160.0 217.8
311.04 169.2 183.7 255.0
245.76 185.1 218.9
212.50 205.0 258.4
155.52 235.3 300.5
122.88 275.1 360.5
Fund
Div2
Div4
VS-505 Single Frequency VCSO
Vectron International, 267 Lowell Road, Hudson, NH 03051 Tel: 1-88-VECTRON-1 • Web: www.vectron.com
Page 6 of 9 Rev: 01Apr2010
25
217
200
150
260
Temperature (DegC)
Time (sec)
t S
t AMB-P
t L
t P
R UP
R DN
Reliability
VI qualification includes aging at various extreme temperatures, shock and vibration, temperature cycling, and
IR reflow simulation. The VS-505 family is capable of meeting the following qualification tests:
Environmental Compliance
Parameter Conditions
Mechanical Shock MIL-STD-883, Method 2002 B
Mechanical Vibration MIL-STD-883, Method 2007 A
Solderability MIL-STD-883, Method 2003
Gross and Fine Leak MIL-STD-883, Method 1014
Resistance to Solvents MIL-STD-883, Method 2016
Moisture Sensitivity Level IPC/JEDEC J-STD-020, MSL1
Handling Precautions
Although ESD protection circuitry has been designed into the VS-505 proper precautions should be taken when
handling and mounting. VI employs a human body model (HBM) and a charged-device model (CDM) for ESD
susceptibility testing and design protection evaluation.
ESD Ratings
Model Minimum Conditions
Human Body Model 2000 V MIL-STD 883, Method 3015
Charged Device Model 1000 V JEDEC, JESD22-C101
Machine Model 200 V JEDEC, JESD22-A115-A
Reflow Profile (IPC/JEDEC J-STD-020)
Parameter Symbol Value
PreHeat Time t S 60 sec Min, 180 sec Max
Ramp Up R UP 3 oC/sec Max
Time Above 217 oC t L 60 sec Min, 150 sec Max
Time To Peak Temperature t AMB-P 480 sec Max
Time At 260 oC t P 20 sec Min, 40 sec Max
Ramp Down R DN 6 oC/sec Max
The VS-505 is qualified to meet the JEDEC standard
for Pb-Free assembly. The temperatures and time
intervals listed are based on the Pb-Free small body
requirements. The temperatures refer to the topside of
the package, measured on the package body surface.
The VS-505 should not be subjected to a wash process
that will immerse it in solvents, NO CLEAN is the
recommended procedure. The VS-505 is designed for
pick and place reflow soldering. It should be reflowed
once on topside position only.
Terminal Plating: ENIG per IPC-4552
Electroless Ni = 3 - 6 µm
Immersion Au = 0.05 µm Min
VS-505 Single Frequency VCSO
Vectron International, 267 Lowell Road, Hudson, NH 03051 Tel: 1-88-VECTRON-1 • Web: www.vectron.com
Page 7 of 9 Rev: 01Apr2010
Outline & Marking Diagram Suggested Pad Layout
mm
[inch]
123
4
56
13.80±0.15
[.543±.006]
9.10±0.15
[.358±.006]
VS505 YWW
CCC-CCCC
XXXMXXX
3.73±0.20
[.147±.008]
2.95
[.116]
0.79
[.031]
1.02
[.040]
2.54
[.100]
6.00±0.15
[.236±.006]
1.55
[.061]
Y = Year
WW = Week
C = Option Codes
XXXMXXX = Frequency
(See Ordering Info)
7.62
[.300]
12.70
[.500]
0.51
[R0.020]
0.76
[.030]
mm
[inch]
8.80
[.346]
1.27
[.050]
2.54
[.100]
5.08
[.200]
3.00
[.118]
Pin Out Output Select (Tri-State LV-CMOS)
Pin Symbol Function Option OS Voltage Range Result
1 VC Control Voltage H (5VCC / 6) to VCC OE
2 OSelect Output Select M
(VCC / 2) ± 15%(VCC / 2) OS
3 GND Case and Electrical Ground
A
L Gnd to (VCC / 6) OD
4 Output Output H (5VCC / 6) to VCC OD
5 COutput Complementary Output M (VCC / 2) ± 15%(VCC / 2) OS
6 VCC Power Supply Voltage
C
L Gnd to (VCC / 6) OE
Floating OSelect Always Results In OE OD = Outputs Disabled
OS = Outputs Set (Output = H, COutput = L)
OE = Outputs Enabled
Tape and Reel (EIA-481-2-A)
Po
W
AN
F
P1
W1
W2
C
B
ØDo
D
Pin ID
Pull Off Direction
Tape Dimensions (mm) Reel Dimensions (mm)
Dimension W F Do Po P1 A B C D N W1 W2 # Per
Tolerance Typ Typ Typ Typ Typ Typ Min Typ Min Min Typ Max Reel
VS-505 24 11.5 1.5 4 12 330 1.5 13 20.2 100 24.4 30.4 200
VS-505 Single Frequency VCSO
Vectron International, 267 Lowell Road, Hudson, NH 03051 Tel: 1-88-VECTRON-1 • Web: www.vectron.com
Page 8 of 9 Rev: 01Apr2010
Standard Frequencies (MHz)
122.880000 125.000000 155.520000 156.250000 160.000000 161.132813 166.628572
167.331646 168.040678 173.370748 173.437500 184.320000 200.000000 212.500000
245.760000 307.200000 315.000000 320.000000 368.640000 400.000000 425.000000
491.520000 500.000000 531.250000 614.400000 622.080000 625.000000 627.329620
644.531250 657.421875 666.514286 669.326582 672.000000 715.538900 716.800000
718.863800 737.280000 739.200000 768.000000 777.600000 800.000000 819.200000
834.640000 877.968756 983.040000 1000.00000
Other Frequencies Available Upon Request.
Ordering Information
VS - 505 - E C E - K A A N – xxxMxxxxxx
Example: VS-505-ECE-KAAN-983M040000
Contact Information:
USA: Vectron International • 267 Lowell Rd. Hudson, NH 03051
Tel: 1-88-VECTRON-1 • Fax: 1-888-FAX-VECTRON
EUROPE: Landstrasse, D-74924, Neckarbischofsheim, Germany
Tel: 49 (0) 7268 8010 • Fax: 49 (0) 7268 801281
ASIA: 1F-2F, No 8 Workshop, No. 308 Fenju Road, WaiGaoQiao Free Trade Zone,
Pudong, Shanghai, China 200131
Tel: 86 21 5048 0777 • Fax: 86 21 5048 1881
Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Product Family
VS: VCSO
Frequency (See Above)
122M880000 – 1G00000000
Package
505: 9.1 x 13.8 x 3.7 mm
Supply Voltage
E: 3.3V
H: 2.5V
Output Type
C: LVPECL
D: LVDS
Operating Temperature
E: -40oC to 85oC
Other (Future Use)
N: N/A
Oscillator Gain
A: Standard
B: Low
Control Logic (Tri-State)
A: L = OD, M = OS, H = OE
C: L = OE, M = OS, H = OD
Absolute Pull Range
K: ± 50 ppm
S: ± 100 ppm
VS-505 Single Frequency VCSO
Vectron International, 267 Lowell Road, Hudson, NH 03051 Tel: 1-88-VECTRON-1 • Web: www.vectron.com
Page 9 of 9 Rev: 01Apr2010
Revision History
Date Approved Description
05Nov2008 JM, BW Release
24Feb2010 BW Updated to reflect new global part numbering system. Marking drawing updated.
08Mar2010 JM Updated applications, frequency range, terminal plating, outline, frequency, and ordering options.
01Apr2010 JM Updated Vc filter model and outline.
