FDS8817NZ N-Channel PowerTrench® MOSFET
©2008 Semiconductor Components Industries, LLC.
October-2017, Rev.3
Publication Order Number:
FDS8817NZ/D
1
FDS8817NZ
N-Channel PowerTrench® MOSFET
30V, 15A, 7.0mΩ
Features
Max rDS(on) = 7mΩ at VGS = 10V, ID = 15A
Max rDS(on) = 10mΩ at VGS = 4.5V, ID =12.6A
HBM ESD protection level of 3.8KV typical (note 3)
High performance trench technology for extremely low rDS(on)
High power and current handling capability
RoHS compliant
General Description
This N-Channel MOSFET is produced using ON
Semiconductor’s advanced PowerTrench® process that has
been especially tailored to minimize the on-state resistance.
This device is well suited for Power Management and load
switching applications common in Notebook Computers and
Portable Battery Packs.
MOSFET Maximum Ratings TA = 25°C unless otherwise noted
Thermal Characteristics
Package Marking and Ordering Information
Symbol Parameter Ratings Units
VDS Drain to Source Voltage 30 V
VGS Gate to Source Voltage ±20 V
IDDrain Current -Continuous (Note 1a) 15 A
-Pulsed 60
EAS Single Pulse Avalanche Energy (Note 4) 181 mJ
PDPower Dissipation (Note 1a) 2.5 W
Power Dissipation (Note 1b) 1.0
TJ, TSTG Operating and Storage Junction Temperature Range -55 to +150 °C
RθJC Thermal Resistance, Junction to Case (Note 1) 25 °C/WRθJA Thermal Resistance, Junction to Ambient (Note 1a) 50
RθJA Thermal Resistance, Junction to Ambient (Note 1b) 125
Device Marking Device Reel Size Tape Width Quantity
FDS8817NZ FDS8817NZ 13” 12mm 2500 units
Pin 1
SO-8
D
D
D
D
S
SS
GD
D
D
D
G
S
S
S
FDS8817NZ N-Channel PowerTrench® MOSFET
www.onsemi.com
2
Notes:
1. RθJA is the sum of the junction-to-case and case-to - am bient thermal resistance where the case thermal r e fer en ce i s d efi n ed as the solder mounting surface of the drain
pins. RθJC is guaranteed by design while RθJA is determined by the user’s board design.
2. Pulse Test: Pulse Width < 300 us, Duty Cycle < 2%.
3. The diode connected between the gate and source serves only as protection against ESD . No gate overvoltage rating is implied.
4. Starting TJ = 25°C, L = 3mH, IAS = 11A, VDD = 30V, VGS = 10V.
Electrical Characteristics TJ = 25°C unless otherwise noted
Off Characteristic s
On Characteristics (Note 2)
Dynamic Characteristics
Switching Characteristics
Drain-Source Diode Characteristics
Symbol Parameter Test Conditions Min Typ Max Units
BVDSS Drain to Source Breakdown Voltage ID = 250μA, VGS = 0V 30 V
ΔBVDSS
ΔTJ
Breakdown Voltage Temperature
Coefficient ID = 250μA, referenced to 25°C 20 mV/°C
IDSS Zero Gate Voltage Drain Current VDS = 24V, VGS = 0V 1μA
IGSS Gate to Source Leakage Current VGS = ±20V, VDS = 0V ±10 μA
VGS(th) Gate to Source Threshold Voltage VGS = VDS, ID = 250μA 1 1.8 3 V
ΔVGS(th)
ΔTJ
Gate to Source Threshold Voltage
Temperature Coefficient ID = 250μA, referenced to 25°C –6 mV/°C
rDS(on) Static Drain to Source On Resistance VGS = 10V, ID = 15A 5.4 7mΩVGS = 4.5V, ID = 12.6A 7.0 10
VGS = 10V, ID = 15A TJ = 125°C 7.5 11
gFS Forward Transconductance VDS = 5V, ID = 15A 54 S
Ciss Input Capacitance VDS = 15V, VGS = 0V,
f = 1MHz
1805 2400 pF
Coss Output Capacitance 335 445 pF
Crss Reverse Transfer Capacitance 200 300 pF
RgGate Resistance f = 1MHz 1.4 Ω
td(on) Turn-On Delay Time VDD = 15V, ID = 15A
VGS = 10V, RGEN = 6Ω
11 22 ns
trRise Ti me 13 26 ns
td(off) Turn-Off Delay Time 25 40 ns
tfFall Time 714 ns
QgTotal Gate Charge VGS = 0V to 10V VDD = 15V
ID = 15A 32 45 nC
QgTotal Gate Charge VGS = 0V to 5V 17 24 nC
Qgs Gate to Source Charge 6nC
Qgd Gate to Drain “Miller” Charge 7nC
VSD Source to Drain Diode Forward Voltage VGS = 0V, IS = 2.1A (Note 2) 0.8 1.2 V
trr Reverse Recovery Time IF = 15A, di/dt = 100A/μs24 36 ns
Qrr Reverse Recovery Charge 15 23 nC
a) 50°C/W when mounted on a
1in2 pad of 2 oz copper. b) 125°C/W when mounted on a
minimum pad .
FDS8817NZ N-Channel PowerTrench® MOSFET
www.onsemi.com
3
Typical Characteristics TJ = 25°C unless otherwise noted
Figure 1. On-Region Characteristics Figure 2. Normalized On-Resistance
vs Drain Current and Gate Voltage
Figure 3. Normalized On- Resistance
vs Junction Te m pe rature Figure 4. On-Resistance vs Gate to
Source Voltage
Figure 5. Transfer Characteristics Figure 6. Source to Drain Diode
Forward Voltage vs Source Current
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5
0
15
30
45
60 VGS = 10.0V
VGS = 4.0V
VGS = 3.0V
VGS = 3.5V
VGS = 4.5V
PULSE DURATION = 80μs
DUTY CYCLE = 0.5%MAX
ID, DRAIN CURRE NT (A)
VDS, DRA IN TO SOURCE VOLTAGE (V)
0 15304560
0
1
2
3
4
5
VGS = 1 0.0V
VGS = 3.0V
VGS = 4.5V
VGS = 3.5V
VGS = 4.0V
PULSE D U R ATION = 80μs
DUTY CYCLE = 0.5%MAX
NORMALIZED
DRAIN TO SOURCE ON-RESISTANCE
ID, DRAIN CURRENT(A)
-50 -25 0 25 50 75 100 125 150
0.6
0.8
1.0
1.2
1.4
1.6
1.8
ID = 15A
VGS = 10V
NORMALIZED
DRAIN TO SOURCE ON-RESISTANCE
TJ, JUNCTION TEMPERATURE (oC)
345678910
2
6
10
14
18
22
26
PULSE DURATION = 80μs
DUTY CYCLE = 0.5%M A X
TJ = 125oC
TJ = 25oC
ID =7.5A
rDS(on), DRAIN TO
SOURCE ON-RESISTANCE (mΩ)
VGS, GATE TO SOURCE VOLTAG E (V)
1.5 2.0 2.5 3.0 3.5 4.0
0
10
20
30
40
50
60
PULSE DURATION = 80μs
DUTY CYCLE = 0.5%MAX
TJ = -55oC
TJ = 25oC
TJ = 150oC
ID, DRAI N CU RR E NT (A)
VGS, GA TE TO SOURCE VOLTAGE (V)
VDD = 5V
0.0 0.2 0.4 0.6 0.8 1.0 1.2
0.001
0.01
0.1
1
10
100
TJ = -55oC
TJ = 25oC
TJ = 150oC
VGS = 0V
IS, REVERSE DRAIN CURRENT (A)
VSD, BODY DIODE FORWARD VOLTA G E (V)
FDS8817NZ N-Channel PowerTrench® MOSFET
www.onsemi.com
4
Figure 7. Gate Charge Characteristics Figure 8. Capacitance vs D r a i n
to Source Voltage
Figure 9. Uncla m p ed Indu c t ive
Switching Capability Figure 10 . Gate Leakage Current vs Gate to
Source Voltage
Figure 11. Maximum Continuous Drain
Current vs Ambient Temperature Figure 12. Forward Bias Safe
Operating Area
Typical Characteristics TJ = 25°C unless otherwise noted
0 5 10 15 20 25 30 35
0
2
4
6
8
10
VDD = 15V
VDD =20V
VGS, GATE TO SOURCE VOLTAGE(V)
Qg, GATE CHARGE(nC)
VDD = 10V
ID = 15A
0.1 1 10
100
1000
f = 1MH z
VGS = 0V
CAPACITANCE (pF)
VDS, DRA IN TO SOURCE VOLTAGE (V)
Crss
Coss
Ciss
3000
30
0.01 0.1 1 10 100
1
10
TJ = 25oC
TJ = 125oC
tAV, TIME IN A V ALANCHE (ms)
IAS, AVALANCHE CURRENT(A)
20
400
0 5 10 15 20 25 30
1E-9
1E-8
1E-7
1E-6
1E-5
1E-4
1E-3
VGS = 0V
TJ = 25oC
TJ = 150oC
VGS, GA TE TO SOURCE VOLTAGE(V)
Ig, GATE LEAK AGE CURRENT (A)
25 50 75 100 125 150
0
3
6
9
12
15
RθJA = 50oC/W
VGS = 4.5V
VGS = 10V
ID, DRAI N CURRE N T (A )
TA, A MBIENT TEMPERATURE (oC)
0.01 0.1 1 10 100
0.01
0.1
1
10
100
100us
1s
1s
DC
10s
100ms
10ms
rDS(on) LIMITED
SINGLE PULSE
TJ = MAX R A T ED
RθJA = 125oC/W
TA = 25oC
ID, DRAIN CURRENT (A)
VDS, D RAIN to SOURCE V OLTAGE (V )
FDS8817NZ N-Channel PowerTrench® MOSFET
www.onsemi.com
5
Figure 13. Single Pulse Maximum Power Dissipation
Figure 14. Transient Thermal Response Curve
Typical Characteristics TJ = 25°C unless otherwise noted
10-4 10-3 10-2 10-1 11010
2103
0.2
1
10
100
1000
2000
RθJA = 125oC/W
VGS = 10V
NORMALIZED THERMAL
IMPEDANCE, ZθJA
t, RECTANGULAR PULSE DURATION (s)
SINGLE PULSE
T
A
= 25
o
C
I = I
25
FOR TEMPERATURES
ABOVE 25
o
C DERATE PEAK
CURRENT AS FOLLOWS:
150 TA
–
125
------------------------
10-4 10-3 10-2 10-1 11010
2103
0.0002
0.001
0.01
0.1
1
2DUTY C YCL E-D ESCENDING ORDER
NORMAL IZED THERMAL
IMPEDANCE, ZθJA
t, RECTANGULAR PULSE DURA TION (s)
D = 0.5
0.2
0.1
0.0 5
0.0 2
0.0 1
SINGLE PULSE
RθJA = 125oC/W
PDM
t1
t2
NOES:
DUTY FACTOR: D = t1/t2
PEAK TJ = PDM x ZθJA x RθJA + T A
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
© Semiconductor Components Industries, LLC
❖
