ASTMUPLP
APPLICATIONS:
FEATURES:
High Performance, Programmable LVPECL SMD MEMS Oscillator
STANDARD SPECIFICATIONS:
Moisture Sensitivity Level (MSL) – 1
Pb
RoHS/RoHS II compliant
ESD Sensitive
• Industry Standard package sizes: 3.2 x 2.5 x 0.75mm,
5 x 3.2 x 0.75mm, 7.0 x 5.0 x 0.9mm
• Any frequency between 1MHz and 625MHz
• Supply Voltage options: 3.3V, 2.8V, 1.8V, 2.25V~3.63V
• Ultra-low RMS phase jitter: 0.6ps typ.
(@156.25MHz, integration bandwidth: 12kHz to 20MHz)
• Frequency Stability options: ±10ppm, ±20ppm, ±25ppm,
±50ppm over -20 to +70°C and -40 to +85°C
• 10GB Ethernet, SONET, SATA, SAS, Fiber Channel, PCI Express
• Storage
• Servers
• Networking
• Telecom
• Instrumentation
• Harsh environment (vibration, shock-prone and humid)
ASTMUPLP
3.2 x 2.5 x 0.75mm;
5.0 x 3.2 x 0.75mm;
7.0 x 5.0 x 0.9mm
Note: 1. Frequencies not supported:
Range 1: From 209.000001MHz to 210.999999MHz
Range 2: From 251.000001MHz to 263.999999MHz
Range 3: From 314.000001MHz to 422.999999MHz
Range 4: From 502.000001MHz to 527.999999MHz
Parameters
Min Typ Max Unit Notes
Output Frequency Range (F) 1 625 MHz
See Note 1 for Frequencies not
supported
Frequency Stability (F
stab
)
-10 +10
ppm
Inclusive of initial tolerance at 25°C,
and variations over operating
temperature, rated power supply
voltage and load
-20 +20
-25 +25
-50 +50
Operating Temperature Range (T
use
) -20 +70 °C
Option “E”
-40 +85
Option “L”
Aging@25°C 1
st
year -2 +2 ppm
10 years -5 +5
Supply Voltage (V
dd
)
2.25 2.5 2.75
V
Option “25”
2.97 3.3 3.63
Option “33”
2.25 - 3.63
Option “Blank” (default)
Input High Voltage(V
IH
) 70%*V
dd
V
Pin 1
Input Low Voltage(V
IL
) 30%*V
dd
V
Pin 1
Input Pull-up Impedance ( Z
in
) 100 250 kΩ
Pin 1, OE logic high or logic low,
ST logic high
2 MΩ
Pin 1, ST logic low
Startup Time (T
start
) 6 10 ms
Measured from the time V
dd
reaches its
rated minimum value
Resume Time ( T
resume
) 6 10 ms
In standby mode. Measured from the
time ST pin crosses 50% threshold
% 55 54 elcyC ytuD
LCEPVL epyT tuptuO
Current Consumption ( I
dd
) 61 69 mA
Excluding load termination current,
V
d
=2.5V or 3.3V
OE Disable Current (I
OD
) 35 mA
OE=Low
Output Disable Leakage Current
( I
lea
) 1 µA
OE=Low
Standby Current (I
std
) 100 µA
ST =Low, for all V
dd
Maximum Output Current ( I
driver
) 30 mA
Maximum average current drawn from
OUT+ or OUT-
LL
ABRACON IS
ISO9001-2015
CERTIFIED
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
REVISED: 12.14.2018