SP200 Series 156-200W, 90-264Vac Input, Open-frame Switching Mode Power Supply Features * * * * * * * * Single output from 156-200W Input voltage range: 90-264V Output current(0-13000mA) 3"x 5" form factor High variety of output voltages from 12Vdc-56Vdc Efficiency to 85% Protections: OVP, SCP, Brown-out, and overload UL, cUL, CE, CB, EFF certifications *Product images are for illustrative purposes only and may vary from actual design. Applications * Network system, telecommunication system, storage system, industrial equipment, and printers Model List*(See part number scheme for model number details) Model Number Input Voltage Output Power Output Voltage Output Current Min. Output Current Max. Efficiency Ripple & Noise (mVp-p) SP200-1121 90-264Vac 156W 12V 0 13A 83% 120 SP200-1241 90-264Vac 180W 24V 0 7.5A 83% 240 SP200-1481 90-264Vac 182.4W 48V 0 3.8A 83% 480 SP200-1561 90-264Vac 200W 56V 0 3.57A 85% 560 Certificates UL/cUL/CB CE/EFF UL/cUL/CB CE/EFF UL/cUL/CB CE/EFF UL/cUL/CB CE/EFF Notes: 1. Load regulation is tested at 10% to 100% of the rated load. 2. Peak-to-peak for 156W, 180W, 182.4W, and 200W models, convection rating @90Vac MIN.; Measurements with a 20MHz bandwidth and terminated with a 22uF electrolytic Cap. In parallel with a 0.1uF ceramic Cap. Technical Sales / Customer Service: +1-818-338-7788 * Email: sales@autec.com 31328 Via Colinas Suite 102 * Westlake Village, CA 91362 USA * www.autec.com 1/4 SP200 Series 156-200W, 90-264Vac Input, Open-frame Switching Mode Power Supply Technical Data Input Voltage Frequency Input Current Inrush Current Load Regulation Line Regulation Turn-on Time Hold-up Time Safety Ground Leakage Current Brown-out Protection Over Voltage Protection Over Load Protection Short circuit protection Operating Temperature Storage Temperature Storage Humidity 90 - 264Vac 50/60 Hz @115Vac 4A rms ; @230Vac 2A rms Cold Start@ 115Vac, at25 < 60 Ap-p Cold Start@ 230Vac, at25 < 100 Ap-p 5% 1% <3 Sec (Full Load @115Vac) > 12mSec (Full Load @115Vac) <3.5mA (Class I Type@230Vac 50Hz) Auto-Recovery Latch off (110%-170%) Hiccup/Auto-Recovery Hiccup/Auto-Recovery 0-50 -40-85 5%-95% RH Safety and EMC Approval UL 60950-1 cUL 60950-1 CB Report(IEC60950-1) CE EFF Technical Sales / Customer Service: +1-818-338-7788 * Email: sales@autec.com 31328 Via Colinas Suite 102 * Westlake Village, CA 91362 USA * www.autec.com 2/4 SP200 Series 156-200W, 90-264Vac Input, Open-frame Switching Mode Power Supply Mechanical Diagram Dimensions: 3"x5"x1" (W x L x H inch) Connector Types & PIN Assignments Connector Connector Type PIN Number Signal CON 1 (INPUT) CON2 (OUTPUT) Molex 09-65-2038 or Equivalent parts Mating Type=Molex 09-52-4034 or Equivalent WAFER 8PIN P=3.96mm(JST-VH)A3961WV-8P A 10/21 05 PIN 1 PIN 2 PIN 1~4 PIN 5~8 LINE NEUTRAL V+ RETURN V- Technical Sales / Customer Service: +1-818-338-7788 * Email: sales@autec.com 31328 Via Colinas Suite 102 * Westlake Village, CA 91362 USA * www.autec.com 3/4 SP200 Series 156-200W, 90-264Vac Input, Open-frame Switching Mode Power Supply Part Number Scheme SP 200-1 XX 1 SP=Open-frame series 1=Single output 200=Output power Watts XX=Rated Voltage Ex.) 12=12V 56=56V 1=Single Input *Product images are for illustrative purposes only and may vary from actual design. *Specifications are subject to change without notice. Autec is not responsible for issues arising from errors or omissions. Technical Sales / Customer Service: +1-818-338-7788 * Email: sales@autec.com 31328 Via Colinas Suite 102 * Westlake Village, CA 91362 USA * www.autec.com 4/4