1.27 mm pitch connector IDC type female connector for cable RPS-( )FK( )-( )+ For cable IDC (1.27 mm) For flat cable Configuration of product Part No. RPS- ( ) FK ( )- ( )+ Series name No. of contacts:20, 26, 34, 40, 50, 52, 60, 68, 80, 100 or 120 Type of contact FK: Female Compatible cable Blank: #28AWG (7/0.127) Flat cable t=1mm or less #30AWG (1/0.254) Flat cable B : #30AWG (7/0.1) Flat cable t=1mm or less Misinsertion-prevention-key grooves Blank: None For using key grooves, refer to the drawing shown below. 8.89 1.27 For 20-contact connector 39.37 8.89 8.89 For 26-contact connector 4.5 TM 6 2.5 46.99 8.89 8.89 59.69 8.89 8.89 27.94 8.89 72.35 8.89 14.5 REF. 16.5 Components HONDA Cable housings B 8.89 For 52-contact connector Spacer Cable housings A A 18.57 B 15.67 C 11.43 RPS-26FK( )-( )+ 22.38 19.48 15.24 RPS-34FK( )-( )+ 27.46 24.56 20.32 RPS-40FK( )-( )+ 31.27 28.37 24.13 RPS-50FK( )-( )+ 37.62 34.72 30.48 RPS-52FK( )-( )+ 38.89 35.99 31.75 RPS-60FK( )-( )+ 43.97 41.07 36.83 1D,4A,AD RPS-68FK( )-( )+ 49.05 46.15 41.91 1E,4A,AE RPS-80FK( )-( )+ 56.67 53.77 49.53 1F,4A,AF RPS-100FK( )-( )+ 69.37 RPS-120FK( )-( )+ 82.07 66.47 62.23 1F,6A,AF 79.17 74.93 1H,8A,AH Tool: IDC locator: FLPT-0003C-(No. of contacts), Hand presser: MFC-K1 (Refer to page Tool-13) Press-in IDC Wire Soldering Crimping wrapping Others Standard key-mounting location Part No. RPS-20FK( )-( )+ Accessories: RPS-PK SMT Key-location symbols and key-groove dimensions Dimensions Mating connectors: RPS-( )RM+, RPS-( )RLM+, RPS-D40MB+ (40-contact connector only) Through hole 8.89 8.89 8.89 29.21 8.89 Combination figure Contacts Insulator 8.89 8.89 8.89 For 120contact connector For 50-contact connector A 8.89 8.89 For 100-contact connector For 40-contact connector C 8.89 8.89 For 80-contact connector For 34-contact connector 21.59 8.89 C 8.89 For 68-contact connector 17.78 7.62 1.27 8.89 For 60-contact connector 12.7 B 10.2 34.29 8.89 5.5 7.2 2.54 A C A,B,AB 1C,2A,AC 1D,2A,AD