Request a Quote
Request a Quote
Home / MCB1000 Evaluation Board
MCB1000
Evaluation Board and Starter Kit
The Keil MCB1000 Evaluation Boards enable you to create and test working
programs based on the NXP family of ARM Cortex™-M0 and Cortex-M3 processor-
based devices.
It is available in four configurations:
The MCB1114 is populated with a NXP LPC1114FBD48/302 device
The MCB11C14 is populated with a NXP LPC11C14FB48/301 device with CAN
The MCB11U14 is populated with a NXP LPC11U14FB48/201 device with USB
The MCB1343 is populated with a NXP LPC1343FBD48 device with USB
Features
50MHz ARM Cortex-M0 processor-based MCU in 48-pin LQFP (MCB1114, MCB11C14 & MCB11U14)
72MHz ARM Cortex-M3 processor-based MCU in 48-pin LQFP (MCB1343)
On-Chip Memory: 32KB Flash and 8KB RAM (6KB LPC11U14)
CAN 2.0 Interface (LPC11C14 only)
USB 2.0 Device (LPC11U14 and LPC1343 only)
Serial Interface
Potentiometer for ADC Input
Up to 42 GPIO
8 User LEDs + power
4 push-buttons (2 GPIO, ISP, & reset)
Power via USB connector
Debug Interface Connectors
10-pin Cortex debug (0.05 inch connector)
Evaluation Software
The MCB1000 Evaluation Boards and Starter Kits include the MDK-Lite development tools. These tools help
you get started writing programs and testing the microcontroller and its capabilities. Sample applications that
run on the MCB1000 evaluation boards, and a Quickstart guide are included.
Ordering Information
The MCB1000 is available as stand alone evaluation boards or as starter kits which includes the
ULINK-ME debug adapter.
MCB1114: MCB1114 evaluation board