MMBT6428LT1G, MMBT6429LT1G Amplifier Transistors NPN Silicon http://onsemi.com Features * These Devices are Pb-Free, Halogen Free/BFR Free and are RoHS COLLECTOR 3 Compliant 1 BASE MAXIMUM RATINGS Rating Symbol 6428LT1 6429LT1 Unit Collector -Emitter Voltage VCEO 50 45 Vdc Collector -Base Voltage VCBO 60 55 Vdc Emitter-Base Voltage VEBO 6.0 Vdc IC 200 mAdc Collector Current - Continuous Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 2 EMITTER 3 SOT-23 (TO-236) CASE 318 STYLE 6 1 2 MARKING DIAGRAM THERMAL CHARACTERISTICS Rating Total Device Dissipation FR- 5 Board (Note 1) TA = 25C Derate above 25C Thermal Resistance, Junction-to-Ambient Total Device Dissipation Alumina Substrate, (Note 2) TA = 25C Derate above 25C Thermal Resistance, Junction-to-Ambient Junction and Storage Temperature Symbol Value Unit PD 225 mW 1.8 mW/C RqJA 556 C/W PD 300 mW 2.4 mW/C RqJA 417 C/W TJ, Tstg -55 to +150 C 1. FR-5 = 1.0 0.75 0.062 in. 2. Alumina = 0.4 0.3 0.024 in. 99.5% alumina. XXX MG G 1 XXX = Specific Device Code MMBT6428LT1 - 1KM MMBT6429LT1 - M1L M = Date Code* G = Pb-Free Package (Note: Microdot may be in either location) *Date Code orientation and/or overbar may vary depending upon manufacturing location. ORDERING INFORMATION Device Package Shipping MMBT6428LT1G SOT-23 (Pb-Free) 3000 Tape & Reel MMBT6429LT1G SOT-23 (Pb-Free) 3000 Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. (c) Semiconductor Components Industries, LLC, 2009 August, 2009 - Rev. 5 1 Publication Order Number: MMBT6428LT1/D MMBT6428LT1G, MMBT6429LT1G ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) Symbol Characteristic Min Max 50 45 - - 60 55 - - - 0.1 - 0.01 - 0.01 250 500 - - Unit OFF CHARACTERISTICS Collector -Emitter Breakdown Voltage (IC = 1.0 mAdc, IB = 0) (IC = 1.0 mAdc, IB = 0) MMBT6428 MMBT6429 Collector -Base Breakdown Voltage (IC = 0.1 mAdc, IE = 0) (IC = 0.1 mAdc, IE = 0) MMBT6428 MMBT6429 V(BR)CEO V(BR)CBO Collector Cutoff Current (VCE = 30 Vdc) ICES Collector Cutoff Current (VCB = 30 Vdc, IE = 0) ICBO Emitter Cutoff Current (VEB = 5.0 Vdc, IC = 0) IEBO Vdc Vdc mAdc mAdc mAdc ON CHARACTERISTICS DC Current Gain (IC = 0.01 mAdc, VCE = 5.0 Vdc) MMBT6428 MMBT6429 hFE - (IC = 0.1 mAdc, VCE = 5.0 Vdc) MMBT6428 MMBT6429 250 500 650 1250 (IC = 1.0 mAdc, VCE = 5.0 Vdc) MMBT6428 MMBT6429 250 500 - - (IC = 10 mAdc, VCE = 5.0 Vdc) MMBT6428 MMBT6429 250 500 - - - - 0.2 0.6 0.56 0.66 100 700 - 3.0 - 8.0 Collector -Emitter Saturation Voltage (IC = 10 mAdc, IB = 0.5 mAdc) (IC = 100 mAdc, IB = 5.0 mAdc) VCE(sat) Base -Emitter On Voltage (IC = 1.0 mAdc, VCE = 5.0 mAdc) VBE(on) Vdc Vdc SMALL-SIGNAL CHARACTERISTICS Current -Gain - Bandwidth Product (IC = 1.0 mAdc, VCE = 5.0 Vdc, f = 100 MHz) fT Output Capacitance (VCB = 10 Vdc, IE = 0, f = 1.0 MHz) Cobo Input Capacitance (VEB = 0.5 Vdc, IC = 0, f = 1.0 MHz) Cibo RS in en IDEAL TRANSISTOR Figure 1. Transistor Noise Model http://onsemi.com 2 MHz pF pF MMBT6428LT1G, MMBT6429LT1G NOISE CHARACTERISTICS (VCE = 5.0 Vdc, TA = 25C) NOISE VOLTAGE 30 30 BANDWIDTH = 1.0 Hz BANDWIDTH = 1.0 Hz 20 RS 0 IC = 10 mA en , NOISE VOLTAGE (nV) en , NOISE VOLTAGE (nV) 20 3.0 mA 10 1.0 mA 7.0 5.0 RS 0 f = 10 Hz 10 100 Hz 7.0 10 kHz 1.0 kHz 5.0 300 mA 3.0 10 20 50 100 200 3.0 0.01 0.02 500 1k 2k 5k 10k 20k 50k 100k f, FREQUENCY (Hz) Figure 2. Effects of Frequency IC = 10 mA 3.0 mA 1.0 mA 300 mA 0.3 100 mA 0.2 RS 0 0.1 10 20 10 mA 50 100 200 10 16 3.0 1.0 0.7 0.5 5.0 20 BANDWIDTH = 1.0 Hz 2.0 0.05 0.1 0.2 0.5 1.0 2.0 IC, COLLECTOR CURRENT (mA) Figure 3. Effects of Collector Current NF, NOISE FIGURE (dB) In, NOISE CURRENT (pA) 10 7.0 5.0 100 kHz BANDWIDTH = 10 Hz to 15.7 kHz 12 500 mA 8.0 IC = 1.0 mA 100 mA 10 mA 4.0 30 mA 0 10 500 1k 2k 5k 10k 20k 50k 100k f, FREQUENCY (Hz) 20 Figure 4. Noise Current 50 100 200 500 1k 2k 5k 10k 20k 50k 100k RS, SOURCE RESISTANCE (OHMS) Figure 5. Wideband Noise Figure 100 Hz NOISE DATA 20 BANDWIDTH = 1.0 Hz IC = 10 mA 16 100 mA 100 70 50 NF, NOISE FIGURE (dB) VT, TOTAL NOISE VOLTAGE (nV) 300 200 3.0 mA 1.0 mA 30 300 mA 20 10 7.0 5.0 30 mA 10 mA IC = 10 mA 3.0 mA 1.0 mA 12 300 mA 8.0 100 mA 30 mA 4.0 10 mA BANDWIDTH = 1.0 Hz 3.0 0 10 20 50 100 200 500 1k 2k 5k 10k 20k 50k 100k RS, SOURCE RESISTANCE (OHMS) 10 Figure 6. Total Noise Voltage 20 50 100 200 500 1k 2k 5k 10k 20k 50k 100k RS, SOURCE RESISTANCE (OHMS) Figure 7. Noise Figure http://onsemi.com 3 h FE, DC CURRENT GAIN (NORMALIZED) MMBT6428LT1G, MMBT6429LT1G 4.0 3.0 VCE = 5.0 V 2.0 TA = 125C 25C 1.0 -55C 0.7 0.5 0.4 0.3 0.2 0.01 0.02 0.03 0.05 0.1 1.0 0.2 0.3 0.5 IC, COLLECTOR CURRENT (mA) 2.0 3.0 5.0 10 Figure 8. DC Current Gain -0.4 RVBE, BASE-EMITTER TEMPERATURE COEFFICIENT (mV/ C) 1.0 TJ = 25C V, VOLTAGE (VOLTS) 0.8 0.6 VBE @ VCE = 5.0 V 0.4 0.2 -0.8 -1.2 TJ = 25C to 125C -1.6 -2.0 -55C to 25C VCE(sat) @ IC/IB = 10 0 0.01 0.02 0.05 0.1 0.2 0.5 1.0 2.0 5.0 10 20 IC, COLLECTOR CURRENT (mA) 50 -2.4 0.01 0.02 0.05 0.1 0.2 0.5 1.0 2.0 5.0 10 IC, COLLECTOR CURRENT (mA) 100 8.0 C, CAPACITANCE (pF) 6.0 TJ = 25C Cob 4.0 3.0 Ceb Cib Ccb 2.0 1.0 0.8 0.1 0.2 1.0 2.0 5.0 0.5 10 20 VR, REVERSE VOLTAGE (VOLTS) 50 100 Figure 10. Temperature Coefficients 50 100 f T, CURRENT-GAIN -- BANDWIDTH PRODUCT (MHz) Figure 9. "On" Voltages 20 Figure 11. Capacitance 500 300 200 100 VCE = 5.0 V TJ = 25C 70 50 1.0 2.0 3.0 5.0 7.0 10 20 30 IC, COLLECTOR CURRENT (mA) 50 70 100 Figure 12. Current-Gain -- Bandwidth Product http://onsemi.com 4 MMBT6428LT1G, MMBT6429LT1G PACKAGE DIMENSIONS SOT-23 (TO236) CASE 318-08 ISSUE AN NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. 4. 318-01 THRU -07 AND -09 OBSOLETE, NEW STANDARD 318-08. D SEE VIEW C 3 HE E c 1 DIM A A1 b c D E e L L1 HE 2 e b 0.25 q A L A1 L1 MIN 0.89 0.01 0.37 0.09 2.80 1.20 1.78 0.10 0.35 2.10 MILLIMETERS NOM MAX 1.00 1.11 0.06 0.10 0.44 0.50 0.13 0.18 2.90 3.04 1.30 1.40 1.90 2.04 0.20 0.30 0.54 0.69 2.40 2.64 MIN 0.035 0.001 0.015 0.003 0.110 0.047 0.070 0.004 0.014 0.083 INCHES NOM 0.040 0.002 0.018 0.005 0.114 0.051 0.075 0.008 0.021 0.094 MAX 0.044 0.004 0.020 0.007 0.120 0.055 0.081 0.012 0.029 0.104 STYLE 6: PIN 1. BASE 2. EMITTER 3. COLLECTOR VIEW C SOLDERING FOOTPRINT 0.95 0.037 0.95 0.037 2.0 0.079 0.9 0.035 SCALE 10:1 0.8 0.031 mm inches ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 http://onsemi.com 5 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MMBT6428LT1/D